[BootLoader] [MODEM] Test Odin UVUCNB4 - T-Mobile Samsung Galaxy Note 3

UPDATED BOOTLOADER POSTED.
********************** THIS IS A TEST FIRST. DO NOT, I REPEAT DO NOT TRY TO ODIN THIS BOOTLOADER IF YOU ARE NOT EXPERIENCED. BRICKING YOUR PHONE, FLASH FLOODS, AUDITS, AND EX-GIRLFRIENDS KEYING YOUR CAR ARE NOT MY FAULT. YOU TRY TO ODIN BL OF YOUR OWN FREE WILL. **********************************************
ANY WHO,
Can somebody please flash this via Odin and make sure that it finishes the process. I'm still researching to see if you need a pit to flash the BL by itself.
THanks guys.
DOWNLOAD
LOAD bootloader.tar.md5 INTO BL ON ODIN
START
BL_N900TUVUCNB4
MD5SUM:b9424697d6a75dba43f019825c45a006
CP_N900TUVUCNB4_Modem This CP only contains modem.bin
MD5SUM:52d72b098819991ab88101757d8e2a8a
CP_N900TUVUCNB4_modem2x This CP contains both modem.bin and Non-Hlos
MD5SUM:82ec4cdaff1492439673391902439604
Dev-Host
cp_N900TUVUCNB4_modem.tar.md5 - 53.49 MB​

I'm getting stuck at the first part sli.mbn, but i already have the updated bootloader. From what i've been reading, this new bootloader my not let you downgrade as it's locked (or partially locked, not sure)
So somebody on old baseband looking to upgrade to new baseband should try this out.

has anyone tried this? id do it myself but i'm in the middle of the gulf with slower than slow internet ,took me five min just to write this reply

dragonstalker said:
I'm getting stuck at the first part sli.mbn, but i already have the updated bootloader. From what i've been reading, this new bootloader my not let you downgrade as it's locked (or partially locked, not sure)
So somebody on old baseband looking to upgrade to new baseband should try this out.
Click to expand...
Click to collapse
It's not locked. It's rollback-protected.
Read this whole thread and you will understand why (except in a few unique situations) you cannot downgrade the bootloader: http://forum.xda-developers.com/showthread.php?t=2642207
Upgrading the bootloader and stock ROMs is a one-way street for the majority of us.

dragonstalker said:
I'm getting stuck at the first part sli.mbn, but i already have the updated bootloader. From what i've been reading, this new bootloader my not let you downgrade as it's locked (or partially locked, not sure)
So somebody on old baseband looking to upgrade to new baseband should try this out.
Click to expand...
Click to collapse
Ill try it for you
edit: failed sdi.mbn

deeznutz1977 said:
Ill try it for you
Click to expand...
Click to collapse
I doubt it will work for you either Deezothernutz. You will probably get the same (cannot xmit) error i ended up getting.
However, i did not change the file to a .zip and try running it in recovery

dragonstalker said:
I doubt it will work for you either Deezothernutz. You will probably get the same (cannot xmit) error i ended up getting.
However, i did not change the file to a .zip and try running it in recovery
Click to expand...
Click to collapse
Im still on the old bootloader

deeznutz1977 said:
Im still on the old bootloader
Click to expand...
Click to collapse
Awwww ok. well hopefully it works. It will take some of the strain off the people that can't get the full update.zip. Although, they know eventually they will need to download a rom based off NB4. Don't know what's going to happen when they try to update bootloader while still being on an MI7 rom.

What's the benefits of the new bootloader anyway?

^^^what he said
Sent from my SM-N900T using XDA Premium 4 mobile app

I think the focus is on the wrong thing . Everyone wants the modem not the bootloader. And from past experince with note 2 specifically the modem was made into a flashable zip.
The Demon Galaxy!

diamantericos said:
I think the focus is on the wrong thing . Everyone wants the modem not the bootloader. And from past experince with note 2 specifically the modem was made into a flashable zip.
The Demon Galaxy!
Click to expand...
Click to collapse
no,
some of us need the updated bootloader because the current wave of custom kernels doesnt play nicely with wifi calling and you cant run a KitKat kernel without the KitKat bootloader

3/7/14
dragonstalker said:
OK, people have been asking me for this, and I said I would extract the Bootloader and post it.
********************** THIS IS A TEST FIRST. DO NOT, I REPEAT DO NOT TRY TO ODIN THIS BOOTLOADER IF YOU ARE NOT EXPERIENCED. BRICKING YOUR PHONE, FLASH FLOODS, AUDITS, AND EX-GIRLFRIENDS KEYING YOUR CAR ARE NOT MY FAULT. YOU TRY TO ODIN BL OF YOUR OWN FREE WILL. **********************************************
ANY WHO,
Can somebody please flash this via Odin and make sure that it finishes the process. I'm still researching to see if you need a pit to flash the BL by itself.
THanks guys.
DOWNLOAD
RENAME BY REMOVING THE .md5
LOAD INTO AP ON ODIN
START
BL_N900TUVUCNB5
MD5SUM:ed3330d84eb5893f1235c71d581dfdda​
Click to expand...
Click to collapse
not finishing-fails

XmentalX said:
no,
some of us need the updated bootloader because the current wave of custom kernels doesnt play nicely with wifi calling and you cant run a KitKat kernel without the KitKat bootloader
Click to expand...
Click to collapse
I don't know about Wi-Fi calling but you can run Kitkat kernels with the old bootloader. Everything seems fine to me.

Techniques said:
I don't know about Wi-Fi calling but you can run Kitkat kernels with the old bootloader. Everything seems fine to me.
Click to expand...
Click to collapse
That kernel does not work with wifi calling
Sent from my SM-N900T using Tapatalk

Techniques said:
What's the benefits of the new bootloader anyway?
Click to expand...
Click to collapse
The only "benefit" is running the new TouchWiz kitkat builds with WiFi calling on the TMO network. The new bootloader is otherwise considered a downgrade.

diamantericos said:
I think the focus is on the wrong thing . Everyone wants the modem not the bootloader. And from past experince with note 2 specifically the modem was made into a flashable zip.
The Demon Galaxy!
Click to expand...
Click to collapse
+1
Would like to run the new modem if possible on the old bootloader.
If I have to update the bootloader to run the new modem, then I will do so...but MY main desire is to have the new modem. - I run AOSP, and those all work for either bootloader.

idtheftvictim said:
+1
Would like to run the new modem if possible on the old bootloader.
If I have to update the bootloader to run the new modem, then I will do so...but MY main desire is to have the new modem. - I run AOSP, and those all work for either bootloader.
Click to expand...
Click to collapse
i'll look into the flashable modem then sense people only want that. still trying to figure out why forcing the bootloader is not seeming to work

would like to see this bootloader working as I am planning to flash 4.4.2 via mobile odin and this bootloader via odin pc and hope that knox is not tripped while retaining root. Currently on 4.3 rooted with RDLV.
Sent from my SM-N900T using Tapatalk

hamsup1o said:
would like to see this bootloader working as I am planning to flash 4.4.2 via mobile odin and this bootloader via odin pc and hope that knox is not tripped while retaining root. Currently on 4.3 rooted with RDLV.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I keep seeing that mobile odin says it will trip the counter. Can anybody confirm that for me please.

Related

[Q] Update bootloader?

Device: AT&T Galaxy S3
Rom:[ROM] AOKP(Jellybean 4.2.2 )Task650 (5.14.2013) (AT&T)
I wanted to update to the devs newest release but i need to update my bootloader in order to do so and ive never done that so if you have any advice or something i can read up on that would be awesome
I "I made some ODIN-flashable files that contain the bootloader, RPM, TZ, and baseband of the stated versions , so that people won't have to go completely back to stock TW. It's intended for those not on the necessary bootloaders yet so that they can flash future CM builds. Put them into the PDA section in Odin and flash away.
I747UCDLK3 (AT&T): http://d-h.st/L64
http://www.mediafire.com/?pu279m19ob7ufru
I747MVLDLK4 (Canadian): http://d-h.st/yqV
http://www.mediafire.com/?74b1e321p537f5d
Note: They're untested, but should work as intended. Tested by fellow users, works fine. Please flash at your own risk!
EDIT: Threw up Mediafire mirrors, since d-h.st seems to be down randomly."
Credit goes to another user who made this. It was posted on the cyanogenmod i747 thread.
http://forum.xda-developers.com/showthread.php?t=1778270
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
it's pretty simple and harmless. took me less than a minute. Domoo has linked you to Jiangyi's post on this topic, which includes his downloads and instructions. cheers
well that was easy thanks for the help guys!
Flashing a bootloader is not harmless. It is one of the few things that can hard brick this device.
mrhaley30705 said:
Flashing a bootloader is not harmless. It is one of the few things that can hard brick this device.
Click to expand...
Click to collapse
i guess i'm wondering why this comment was necessary considering this threads circumstances and the correct information being posted. bootloaders dont kill people. people kill people...
xBeerdroiDx said:
i guess i'm wondering why this comment was necessary considering this threads circumstances and the correct information being posted. bootloaders dont kill people. people kill people...
Click to expand...
Click to collapse
Because it was a good warning. Flashing a ROM should not be taken lightly and flashing a bootloader should be done with alot of care as it can brick your device to the point of needed a JTAG to fix.
zelendel said:
Because it was a good warning. Flashing a ROM should not be taken lightly and flashing a bootloader should be done with alot of care as it can brick your device to the point of needed a JTAG to fix.
Click to expand...
Click to collapse
yes, bootloaders are very serious business. just because this bootloader flashed without error does not mean that the operation is not serious. take note, OP.
zelendel, everything in context.
cheers
I have to go into download mode when I go to update the bootloader right?
Sent from my SGH-I747 using XDA Premium HD app
I haven't messed with boot loaders in a long time....my baseband version is already ucdlk3...that's the modem does that mean I would need an update?
Sent from my SGH-I747 using xda premium
Stankydanky702 said:
I have to go into download mode when I go to update the bootloader right? please take the time to read up on this procedure and understand what you're doing. best of luck.
Sent from my SGH-I747 using XDA Premium HD app
Click to expand...
Click to collapse
yes sir. you have to be in download mode to flash anything via odin.
http://forum.xda-developers.com/showpost.php?p=41535366&postcount=26684
thegodsquirrel said:
I haven't messed with boot loaders in a long time....my baseband version is already ucdlk3...that's the modem does that mean I would need an update?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
As long as your bootloader ends in a dlk3 then you have the most recent one.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Yes you go into download mode
Sent from my SGH-I747 using xda app-developers app
You can check your bootloader version by opening a terminal and typing:
Code:
su
getprop ro.bootloader
I747UCDLK3. Most current. Got it from At&t recently...I am surprised that they did the update. I didn't let the phone OTA either. Honestly, though I didn't look, flashed it out of the box.
thegodsquirrel said:
I747UCDLK3. Most current. Got it from At&t recently...I am surprised that they did the update. I didn't let the phone OTA either. Honestly, though I didn't look, flashed it out of the box.
Click to expand...
Click to collapse
I'm on Rogers, with bootloader I747MVLALH1, haven't flashed anything since mid April. Should I use ODIN to flash the I747MVLDLK4 bootloader? I was planning on updating to a newer CM10.1 nightly and just saw that I needed a new bootloader to do it properly.
ily112 said:
I'm on Rogers, with bootloader I747MVLALH1, haven't flashed anything since mid April. Should I use ODIN to flash the I747MVLDLK4 bootloader? I was planning on updating to a newer CM10.1 nightly and just saw that I needed a new bootloader to do it properly.
Click to expand...
Click to collapse
You need the new bootloader for the newer nightlies to work.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
The I747MVLDLK4 bootloader correct? And once I flash that bootloader, will it still work even with my 04/13 Nightly that I have currently running? Wouldn't want flash the bootloader and not have the phone boot so I couldn't flash the newer Nightlies. Thanks for the help btw, really appreciate it!
ily112 said:
The I747MVLDLK4 bootloader correct? And once I flash that bootloader, will it still work even with my 04/13 Nightly that I have currently running? Wouldn't want flash the bootloader and not have the phone boot so I couldn't flash the newer Nightlies. Thanks for the help btw, really appreciate it!
Click to expand...
Click to collapse
bootloader thread: http://forum.xda-developers.com/showpost.php?p=41503727&postcount=13716
tasks post:
@ Everyone
I don't have time to screw around. I just tested this and it works fine. I just would've rather bricked my device rather than yours. That's why I like to test all links for these types of things before I promote them off to you guys..
1.) Go here (above posted thread link)
2.) Put phone into download mode and then open Odin.
3.) Choose the PDA slot and then select the correct file for your device (AT&T is LK3)
4.) Hit start and wait until its finished.
5.) Done
5.) Remind me that I shouldn't be trying to do this from my phone. All it does it piss me off.
[deleted]

[Q] Galaxy S3 downgrade from android 4.3 to 4.1.2

I have a T-Mobile Samsung Galaxy S3 (SGH-T999) and I made the mistake of allowing an upgrade??? to android 4.3 which has been very unstable for me. T-Mobile, Samsung, and Google all say that there are no updates to 4.3 and I can’t downgrade, so basically I’m out of luck.
Can I downgrade 4.3 to 4.1.2 without bricking my phone and hopefully without voiding my warranty? If so, please give me some instructions. I downloaded Odin 3.07 and firmware: root66_TMO_T999UVDMD5.7z. Thanks a million.
I don't think it's possible to downgrade anymore due to Knox. There was a thread talking about it
Maybe you should check it out.
Sent from my C6916
You cannot downgrade without voiding your warranty
Sent from my SGH-T999 using Tapatalk
Dont flash md5root66 after update!
newbee123 said:
I have a T-Mobile Samsung Galaxy S3 (SGH-T999) and I made the mistake of allowing an upgrade??? to android 4.3 which has been very unstable for me. T-Mobile, Samsung, and Google all say that there are no updates to 4.3 and I can’t downgrade, so basically I’m out of luck.
Can I downgrade 4.3 to 4.1.2 without bricking my phone and hopefully without voiding my warranty? If so, please give me some instructions. I downloaded Odin 3.07 and firmware: root66_TMO_T999UVDMD5.7z. Thanks a million.
Click to expand...
Click to collapse
if you flash the root66 of the md5 firmware via odin after you have already upgraded to 4.3 you will HARD BRICK your phone. Taking the 4.3 ota updates your bootloader and flashing anything other than 4.3 in odin will wreck your life.
You need to download the root66mjc firmware here:
http://www.androidfilehost.com/?fid=23212708291682181
And flash it in odin. Then from there install a custom recovery and download a rom of your choosing and the compatible modem. I recommend you download the md5 modem. Then you're gonna wanna boot into recovery and flash the rom and the modem only (kernels are ok of course) JUST NO BOOTLOADERS. I don't even know if you can do that in recovery but trying to mess with the new BL will brick your face I mean phone.
full steps?
so does anyone have any full list of steps and links on where to get the modems and all to downgrade 4.3 with knox down to 4.1.2
pamma83 said:
so does anyone have any full list of steps and links on where to get the modems and all to downgrade 4.3 with knox down to 4.1.2
Click to expand...
Click to collapse
Would you try reading the thread before posting ? Its not that long. You will see your answer provided by 3 different individuals.
Perseus71 said:
Would you try reading the thread before posting ? Its not that long. You will see your answer provided by 3 different individuals.
Click to expand...
Click to collapse
this thread had 4 posts before i posted and only 1 talks about what to do..where are you seeing 3 different people saying what to do and how???
and i asked where to get the modems and all.. do you see anyone saying where to get them??
pamma83 said:
this thread had 4 posts before i posted and only 1 talks about what to do..where are you seeing 3 different people saying what to do and how???
and i asked where to get the modems and all.. do you see anyone saying where to get them??
Click to expand...
Click to collapse
I was referring to the 3 persons who responded to the OP's question similar to yours. @jtl_777's response is pointing to the 4.3 Firmware.
Its more implied in this thread than stated matter of factly. This thread is several months old, and I know your question has been asked countless times in many different threads, much more recently than in this one.
I suggest you read the stickies in each section. Just by doing that you will find all firmware and modems and more. You will also find that the answer is no, you cannot downgrade your full firmware from 4.3. And you never will be able to.
If your having problems I suggest flashing the latest 4.3 build via Odin, then factory resetting. Start over clean with minimal restoring of backups (only the essentials).
Every time an update comes out there are people who have problems. The majority are solved by doing what I just said because most bugs are caused by using old data created by old apps on the new build.
Even if you could downgrade, chances are youd run into even more issues and still have to factory reset.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
... You will also find that the answer is no, you cannot downgrade your full firmware from 4.3. And you never will be able to.
Click to expand...
Click to collapse
thanks but I read online and some youtube videos showing that people have gone from 4.3 back to 4.1.2, just trying to make the phone the way it was before any updates were done and wondering if anyone knows the proper steps without bricking the phone.
They probably just flashed a rom. It is simply not possible to downgrade the firmware though.
Sent from my SGH-T999 using Tapatalk
so i found this post: http://forum.xda-developers.com/showpost.php?p=48758977&postcount=1412 and i have the same case as Christopher4tw with a stock 4.3 T999UVUEMJC and just want to get back to T999UVDMD5 so its running the 4.1.2 version of android
so do i just download the below file, extract and flash via odin then do a wipe via recovery? If not can you please explain how to go about this so i can have 4.1.2 running on the phone
April 2013 - 4.1.2 JellyBean
Note: This is based off of the stock image TMO T999UVDMD5
Perm Mirror: Download - root66_TMO_T999UVDMD5.7z
You cannot downgrade your firmware.
Flash an older rom with cwm or twrp if you need to be running md5
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
You cannot downgrade your firmware.
Flash an older rom with cwm or twrp if you need to be running md5
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
so can I use this http://forum.xda-developers.com/showthread.php?t=2276645 and flash via cwm or twrp recovery and it will make the phone run 4.1.2 without bricking or having issues with knox or does that have the bootloader issue with it as well?
Yes, that one you can flash.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Yes, that one you can flash.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
great thanks so much for your help, can I flash the recovery via odin mobile app or is it safer to do it via pc?
Safer via PC.
It is possible via Mobile Odin. But that's one of the partitions I don't want to mess with when Phone is Booted/
If you know how to use Mobile Odin then it should be fine. I agree that its better to use pc odin if youre not familiar with Mobile Odin. However, it actually doesnt flash the recovery while booted. It flashes the flash kernel which is MO's temp recovery. It then boots to this and flashes. (So, perseus is right in that regard. But I personally love Mobile Odin and find it extremely useful and consider it safe unless you are brand new to all of this).
In fact Mobile Odin is another way you can flash 4.1.2. Itll flash the firmware, but only the system, kernel, recovery and modem. (I didnt bring this up previously because I didnt want to confuse, or go too far too fast).
If youre thinking about flashing recovery via MO, though, you can also instead just flash the rom you found. No need to flash the recovery unless you just want to. Put the rom in the update.zip slot and itll flash just fine.
If any of this is confusing, just stick with the original plan for now. The rest will come easy if you dont rush things.
One more thing, while you can usually update stock without wiping, you may find you have to factory reset after downgrading as the old system was not built for using data created on a new version.
Sent from my SGH-T999 using Tapatalk
thanks for all the help.. had to do the wipe since it kept showing the samsung logo but after that it booted just fine.
t999L
I have tried so many times to downgrade to 4.1.2 using odin but I havent be able to. I always get an error message

help unlock t999

Hey guys i just got this phone its on stock rom 4.3 .....can it be network unlocked please so i can use my jamaican networks ,if so how can i go about it,
dorian2kx said:
Hey guys i just got this phone its on stock rom 4.3 .....can it be network unlocked please so i can use my jamaican networks ,if so how can i go about it,
Click to expand...
Click to collapse
If I remember right, once on 4.3 you can no longer use the free unlock method. You will have to buy a code online. If you have a T999, you can try flashing the 4.1.1 modem and see if you can do it though. You wont get any signal if you are on a 4.3 rom until you flash back to the 4.3 modem btw.
.
DocHoliday77 said:
If I remember right, once on 4.3 you can no longer use the free unlock method. You will have to buy a code online. If you have a T999, you can try flashing the 4.1.1 modem and see if you can do it though. You wont get any signal if you are on a 4.3 rom until you flash back to the 4.3 modem btw.
Click to expand...
Click to collapse
Thanks bro I'll give it a try, but I'll have to root first before I can flash the 4.1 modem or I can just go straight away and do it through Odin?
dorian2kx said:
Thanks bro I'll give it a try, but I'll have to root first before I can flash the 4.1 modem or I can just go straight away and do it through Odin?
Click to expand...
Click to collapse
You dont need to be rooted, but you do need a custom recovery (TWRP or CWM) in order to flash the modem. I never made any odin flashable packages for the modems, only recovery flashable.
Just so you know, flashing a custom recovery will void your warranty if its still valid and you care about that.
Thanks bro, I don't care about warranty.... So all I have to do now is flash a recovery then flash the modem, hmm wonder if anyone has ever got it to work like that before tho.... If it doesn't tho can u recommend a cheap unlocking site please
dorian2kx said:
Thanks bro, I don't care about warranty.... So all I have to do now is flash a recovery then flash the modem, hmm wonder if anyone has ever got it to work like that before tho.... If it doesn't tho can u recommend a cheap unlocking site please
Click to expand...
Click to collapse
All I remember for sure is that on 4.1.2, samsung patched against this unlock method, but we were still able to flash the 4.1.1 modem and unlock. In 4.3, you cant use an older modem or youll get no signal, but Im just not sure if you can still use the free unlock method that way.
Ebay had several very cheap options at one point. Also, http://gsmliberty.net has/had(?) a promo where if you posted a video of yourself unlocking using their method they would refund you your money, essentially making it free. Not sure if that is still valid though.
---------- Post added at 10:21 AM ---------- Previous post was at 10:18 AM ----------
There were several mentions of specific sellers that only charged a few bucks in the unlock thread if you want to dig in to find them.
hey Doc i flashed a 4.1.1 modem but came up as baseband unknown
dorian2kx said:
hey Doc i flashed a 4.1.1 modem but came up as baseband unknown
Click to expand...
Click to collapse
its normal, follow the unlock procedures and see if it works.. high possibility it may not work but worth a shot
Sent from my SGH-M919 using Tapatalk
dorian2kx said:
hey Doc i flashed a 4.1.1 modem but came up as baseband unknown
Click to expand...
Click to collapse
serio22 said:
its normal, follow the unlock procedures and see if it works.. high possibility it may not work but worth a shot
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Yup, and let us know whether it does or not, so everyone knows for future reference.
Do i need to flash a particular 4.1 modem or i can just use any one cause I tried but when i get into service menu the options are no longer there
dorian2kx said:
Do i need to flash a particular 4.1 modem or i can just use any one cause I tried but when i get into service menu the options are no longer there
Click to expand...
Click to collapse
Any 4.1.1 modem, as long as its one for your model device. If you wanted you could see if flashing a 4.1.1 or 4.1.2 rom would make a difference, but as before, I kinda doubt it will.
When we were updated to 4.1.2, and found that the unlock method was patched, all we had to do was flash an older modem. Didnt matter what build it was from.
agree
DocHoliday77 said:
Any 4.1.1 modem, as long as its one for your model device. If you wanted you could see if flashing a 4.1.1 or 4.1.2 rom would make a difference, but as before, I kinda doubt it will.
When we were updated to 4.1.2, and found that the unlock method was patched, all we had to do was flash an older modem. Didnt matter what build it was from.
Click to expand...
Click to collapse
i guess this way is ok.
use rom 4,1,1 and the modem for rom 4.1.1, phone should work fine, hope someone can try this way. and tell us the result.

updating bootloader and modem

i have att s3 i747. under baseband it says i747ucdlk3.
I want to install and experience with more roms, especially the lollipop nightlies. but they require an updated bootloader! Otherwise, my phone doesnt read the sim card. i have read so many threads on how to update the bootloader and modem/firmware, but half of the threads i read result in many people bricking their device! How do i update the bootloader properly? that is, without bricking my phone of course! should i do incremental updates? or jump from lk3 to the latest one? im lost on what to do, like i said so many people got bricked. can anyone help me out? it would be greatly appreciated!
i used this to get to NE4 with no problems.
http://forum.xda-developers.com/showthread.php?t=2789917
always , read read read. make a backup. good luck.
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
i used this to get to NE4 with no problems.
http://forum.xda-developers.com/showthread.php?t=2789917
always , read read read. make a backup. good luck.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
Thanks I'll read up on it right now. I agree, I always read on forums first, which is why I found so many posts about how people had bricked their phones.
One question: did u use this to update from lk3?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Is your phone sim unlocked? If it isn't, you could flash back to a stock AT&T 4.1.1 ROM, unlock, and run OTA updates until your have the latest ROM on your phone. This approach requires more time but it is the simplest and least risky in my opinion.
So basically you're saying to flash back to unrooted stock. And then keep using att updates until I get to the latest one, and then I should be on ne4 automatically?? Not sure if I'm understanding this correctly.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Yes, flash back to stock and keep running ota until you hit the latest release.
If you have warranty left on your phone, updating, rooting, and loading a custom recovery will change the warranty bit from 0 to 1 which voids the remaining warranty.
audit13 said:
Yes, flash back to stock and keep running ota until you hit the latest release.
If you have warranty left on your phone, updating, rooting, and loading a custom recovery will change the warranty bit from 0 to 1 which voids the remaining warranty.
Click to expand...
Click to collapse
K will do when chance the chance. Btw. Isn't there a requirement to not go past a certain firmware if I wanted to revert back to stock or else it'll brick? I thought it was if I go past 4.3. Any ideas?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
You will have no choice but to flash to 4.4.2 bootloader and modem if you want to run the latest d2lte ROMs.
True, once you are on 4.3 or higher bootloader, you cannot go back to stock 4.1.1.
audit13 said:
You will have no choice but to flash to 4.4.2 bootloader and modem if you want to run the latest d2lte ROMs.
True, once you are on 4.3 or higher bootloader, you cannot go back to stock 4.1.1.
Click to expand...
Click to collapse
Isn't the 4.1.1 bootloader lk3? Cuz for some reason I'm on a 4.4.4 ROM with a baseband that ends in lk3....does that mean anything?
Sorry guys I'm clueless when it comes to modems and bootloaders and all that stuff. Thanks for these replies btw.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Are you running a custom rom?
audit13 said:
Are you running a custom rom?
Click to expand...
Click to collapse
Yes. CROM
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Some kk roms will run on a 4.1.1 bootloader while others will not. I know some of the newer cm11 roms will work but you will not have any signal with older modems and bootloaders.
audit13 said:
Some kk roms will run on a 4.1.1 bootloader while others will not. I know some of the newer cm11 roms will work but you will not have any signal with older modems and bootloaders.
Click to expand...
Click to collapse
i had read of some people have to use ktoonz kernel to get wifi , but that is usually in the OP.
thank you once again @audit13 for coming to the rescue. i am now M8 and losing what little i747 now-how i had. lmao.
"all i can really do , is stay out of my own way and let the will of heaven be done"
So since I'm on lk3.. I should still be able to flash black to 4.1.1 stock via Odin and then use the ota right? Or should I flash back to 4.3. Which one is the safe option? Im thinking about using the ota option mentioned earlier in this thread.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app

Downgrade from 4.4.4 to 4.4.2

Please I tried to downgrade my galaxy S4 from t-mobile and I bricked it(already fixed it), but I need to downgrade it to unlock it. I tried every way I found here but I keep bricking it
I believe you are suppose to flash the 4.2.2 modem, root, the run regionlockaway, and reflash current modem.
audit13 said:
I believe you are suppose to flash the 4.2.2 modem, root, the run regionlockaway, and reflash current modem.
Click to expand...
Click to collapse
I'm having trouble finding the modems
Confirm the model number in download mode, then do a google search for the appropriate firmware, extract the modem, and flash it?
I'm not sure but you maybe able to use other m919 roms for extract the modem to unlock the phone.
audit13 said:
Confirm the model number in download mode, then do a google search for the appropriate firmware, extract the modem, and flash it?
I'm not sure but you maybe able to use other m919 roms for extract the modem to unlock the phone.
Click to expand...
Click to collapse
Apparently it worked but let me check.....yep it worked MANY THANKS MAN I REALLY NEEDED THAT PHONE ?
AssassinKidRX said:
Apparently it worked but let me check.....yep it worked MANY THANKS MAN I REALLY NEEDED THAT PHONE ?
Click to expand...
Click to collapse
It seems I talked too early but this problems more easy.....my dialer and messaging app are slow af but I'm wondering if I can re-flash the stock 4.4.4 firmware even if that's the version I currently am? Because think I the problem is the modem that I flash had problem
AssassinKidRX said:
It seems I talked too early but this problems more easy.....my dialer and messaging app are slow af but I'm wondering if I can re-flash the stock 4.4.4 firmware even if that's the version I currently am? Because think I the problem is the modem that I flash had problem
Click to expand...
Click to collapse
Yep, I re-flashed the stock firmware and it works?
After downgrading the modem, I always recommend reflashing the latest rom from sammobile.com in Odin followed by a full wipe in stock recovery.
audit13 said:
After downgrading the modem, I always recommend reflashing the latest rom from sammobile.com in Odin followed by a full wipe in stock recovery.
Click to expand...
Click to collapse
Yeah that was I ended doing since I didn't want any problem. I will upload it in a minute
1hr till it uploads ?
Here's regionlockaway
Here's the link:
https://drive.google.com/file/d/0B_V3a99HuE-tamQtUEU3TGdwVkU/view?usp=sharing
https://drive.google.com/file/d/0B_V3a99HuE-tNzUtaEVTN0hDRkE/view?usp=sharing
Both have the same files.
1. Unzip and flash 4.2.2 modem with Odin(CP Button).
2. Open RegionLockAway and follow the instructions.
3. Once RegionLockAway finish flash 4.4.4 modem.
It's better if you're in stock(if you wanna be sure nothing happens).
Any leads on the Mobilicity or Wind modems?
Obscenic said:
Any leads on the Mobilicity or Wind modems?
Click to expand...
Click to collapse
Not I know, heard or see, but will look into it
Sent from my SHIELD Tablet K1 using XDA Labs
AssassinKidRX said:
Not I know, heard or see, but will look into it
Sent from my SHIELD Tablet K1 using XDA Labs
Click to expand...
Click to collapse
Modem Only: M919V_GLW_M919VVLUAMDJ (SGH-M919V Wind/Freedom)
https://www.dropbox.com/s/iqewmm2zr6sgt9u/modem.bin?dl=0
I'll leave it there for a year or so.
Obscenic said:
Modem Only: M919V_GLW_M919VVLUAMDJ (SGH-M919V Wind/Freedom)
https://www.dropbox.com/s/iqewmm2zr6sgt9u/modem.bin?dl=0
I'll leave it there for a year or so.
Click to expand...
Click to collapse
Thanks!
Sent from my SHIELD Tablet K1 using XDA Labs
S4 (m919) only boots into dowload mode after downgrade attempt
AssassinKidRX said:
Please I tried to downgrade my galaxy S4 from t-mobile and I bricked it(already fixed it), but I need to downgrade it to unlock it. I tried every way I found here but I keep bricking it
Click to expand...
Click to collapse
My s4 is presently "soft-bricked" after downgrade attempt. Would really appreciate some help to fix it.

Categories

Resources