Related
EDIT: Sorry, this post wen't to completely wrong place. Hope some mod can move this to right section.
I know. There's number of similar threats. I have read them all. Or at least feels like it.
I managed to soft brick my sgs2. I was playing with this new lol boot (dual boot app) from market. I think I pushed something wrong in this app. After that my intention was to make a CWM backup before I start to play seriously with lol boot. At the second I pressed backup from the menu, my phone shut down. Now I'm in a sitsuation whre I can't enter recovery mode. There's just this Samsung Galaxy logo. At the time I had CheckRom v4 installed.
My intention was to flash stock rom via odin. I can enter to download mode just fine BUT odin or kies isn't able to connect to phone. Kies is recognizing the usb connection, but fails to connect it properly. Here's a list what I've tried so far:
- Restart PC (100x)
- Restart Odin (101x)
- Restart Kies
- Reinstall USB Drivers (with Kies and without)
- Trying different computer which has never seen Kies or any Samsung USB drivers
- Reinstalling Windows (W7 x64)
- 3 different USB cables (2 stock Samsung)
- Different USB ports
- Also Nexus S USB drivers as mentioned on another thead in XDA
- Starting odin after USB connection, and before
- Googling with any keywords I have come up
Is there anything else I can do for now?
you mean when you try to connect to odin there is no yellow square ?
maybe try to remove battery for + 90 sec and try to enter in odin ?
ps in this situation you must forget kies since its barely work when everything is fine with the phone ...
Thanks for your reply. Odin doesn't 'do' anything when i connect my device. I'm using version 4.43. When I connect s2, windows install two drivers, Samsung Mobile USB CDC Composite Device and Samsung Mobile USB Modem. I also tried taking battery off. Actually the battery wasn't attached for 6 hours, still no success.
I didn't see this in your list, but have you tried entering download mode and connecting?
Sent from my GT-I9100
can you enter recovery? which recovery you have? Clockwork? 2e, 3e?
Just trying to feel out your situation...
Guys. I think there is some Android God that came to help me. After ~36 hours of googling, crying and throwing the phone to the wall, I've managed to solve my problem! As I was googling cheap shotgun for me, I had a vision. Why not, let's try older odin. The solution was v1.83. And right when I plugged in my phone with this odin, it got recognized! At the same second! Nuff said, I'm satisfied. And do you know what is the best part? I flashed with original stock rom and every app, every launcher and so on was STILL WORKING and running!
Thanks to everyone. I'll be more careful next time!
EDIT: How the heck the custom binary counter went to zero? I was thinking its only possible with usb jig?
not older odin! but the one u need for sgs2 (and 1) only use odin 3 v. 1.83 or v. 1.3.
The one you said IS NOT FOR YOUR PHONE. Sorry I missed that text.
So if I understood you correctly, u are saying that I flashed my phone with wrong version of odin (1.83) ? Sorry, I'cant understand english too good, so can you say your point more literally and s_l_o_w_l_y? Thanks
I only use odin3 v1.3 or odin 3 v.1.83.
As far as I know, you cannot use anything else, since it is not made for your device!
I might be wrong, if so, somebody correct me.
Sent from my GT-I9100
So if you're correct on this, the reason why I couldn't get my phone recognized was the wrong version of odin?
pazzio said:
Guys. I think there is some Android God that came to help me. After ~36 hours of googling, crying and throwing the phone to the wall, I've managed to solve my problem! As I was googling cheap shotgun for me, I had a vision. Why not, let's try older odin. The solution was v1.83. And right when I plugged in my phone with this odin, it got recognized! At the same second! Nuff said, I'm satisfied. And do you know what is the best part? I flashed with original stock rom and every app, every launcher and so on was STILL WORKING and running!
Thanks to everyone. I'll be more careful next time!
EDIT: How the heck the custom binary counter went to zero? I was thinking its only possible with usb jig?
Click to expand...
Click to collapse
gratz!
to reset your binary, there is only one way to do it. u are right, usb jig.
however, beware, i read somewhere saying that GB ver 2.3.4 onward has a new version of bootloader which prevent usb jig from resetting the counter, which mean samsung is trying to lock the bootloader now. however, flashing the old bootloader still helps (claim by others).
I can get into download mode, but odin doesn't recognize, the only other screen i get too sdays "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again, but Kies cant connect to it, am i screwed? Please help this all happened from changing my screen density, i cant find anyway too restore, i'm not a noob and am in desperate help, i'm gonna be soo bummed if i brick, but i have a feeling if i can get too download mode, there must be a way too restore it.
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
I flashed the newest version of Roman BB's AOKP CM9 Kang and tried to change the density, i went too restore my nandroid and it froze before it finished, I tried odin and the first 2 times it recognized but both froze before the end. im kinda couch surfing so now i'm incredibally screwed without a phone, please help.
badname said:
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Roman bb's most updated AOKP, i changed the screen density and when i went to reboot it bootlooped, so i tried restoring a nandroid wich failed, tryed again, and now i cant get too recovery, i can only get too download mode, so i tried using odin too go back too stock, it failed almost at the end, twice, now i cant get odin to recognize my phone and it wont turn on, the only thing i can do is get too download mode, and too the thing saying use kies recovery, which does nothing because it won't connect. I'm at a total lost, i'm so scared i lost my only source of income, at this point in my life, if i dont have a phone, i dont have work or food or a warm place too sleep. Please anyone with any ideas please help.
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
kobridge said:
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
Click to expand...
Click to collapse
I've never heard that one before. What do you think is unique about the stock micro-usb cable?
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
garwynn said:
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
Click to expand...
Click to collapse
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
simple
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
use a different cable and uninstall drivers and reinstall reboot computer also
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Yeah now that you mention it I realized my nook color micro usb cable has a longer metal end-piece than my E4GT, and won't connect properly. I thought the length of the metal prong would have also been standardized. Go figure.
TimidRat said:
I flashed CM9. i went too restore my nandroid.
Click to expand...
Click to collapse
This is the problem unless you flashed a gb kernel/recovery first. You should not do anything in ICS recovery.
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Its true not all cables are the same, but the funny part is from the beginning of OG Epic days we figured out quick the only thing you should do with the stock cable is charge... its garbage. Maybe the new model is better, havent tried it, but it looked pretty much the same, thin little thing... I use my 4 year old BBerry cable, about as thick as a cat-5... never had an issue. But yeah, try new drivers, cable, diff PC, use a USB that is physically part of the Motherboard of the PC (desktop)... all these things help with the shoddy drivers, etc... you may get lucky...
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
But you said you did attempt a restore through CWM after the bootloop, correct? If you did and you're having problems you *may* have bricked. Using ODIN is a surefire way to confirm whether you did or not. If you didn't attempt anything through CWM while having CM9 installed then you may not be bricked but are obviously still having issues. As it has been said before - and quite often - CWM at your own risk; ODIN is believed to be the safest option.
Regardless, if you're having problems and the USB cable doesn't fix it I'll still recommend trying to get back to a GB stock ROM by ODIN. At the worst you've lost what you have done since the last backup, since you can restore that from the backup once you get back to GB. With so many bricked phones lately it may be best to err on the side of caution this time...
I've tried everything mentioned, except a different pc, i tried linux, on my pc odin doesntr recognize my phone, , but i just went and plugged a flash fdrive in so now im thinking my computer is having usb problems, so im gonna try another computer, i also made a usb jig to reset the odin counter too take it too sprint but it didnt work... i'm so confused and screwed without my phone. Thank you everyone for trying too help. Any more ides are greatly appreciated! Thanks soo much guys!
ive had this problem before and basically my phone would turn on but no signal sd card didnt work wouldent read in computer but if you cant get it to work and have fifty bucks u can go to mobiletechvideos.com and it will take about mabe 3-4 days mine took a week since i sent on a friday but it costs fifty bucks and the only thing when i came back that wasnt working 100% was the picture gallery. true him if it comes down to it
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
blackroseMD1 said:
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
Click to expand...
Click to collapse
Yup that's what theyre doing for me, i'll get it tomorrow or tuesday, cant complain too much im gonna get one with no scratches.
Thank you everyone who replied, im set egtting my new one, im gonna try and swindle kepping the bricked one cause im sure it could be of major use too a dev....
Sprint Epic 4G Touch Appears Bricked
My Sprint Samsung Galaxy S II Epic 4G Touch will no longer connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
FACTORY MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
But connecting to my PC still fails. Any ideas?
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
re: flashing stock rom.
empire-1 said:
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
Click to expand...
Click to collapse
First thing to do is to put the phone into DOWNLOAD mode to TEST it and see if ODIN will recognize it.
If Odin recognizes it then there is NO need to send it back to Samsung, all it needs is a proper Odin flash.
Just because when all those missing apps and the usb had issues it does not necessarily mean that Odin will not recognize the phone.
If your computer is not working or you don't have a windows computer find a relative or a friend who has one.
Even a laptop computer would do just fine.
Good Luck!
Tried that
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
re: try this.
empire-1 said:
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
Click to expand...
Click to collapse
Try a different usb cable and or plug usb into different port,
if that fails, re-install the Samsung usb drivers for the phone.
Remember, if the phone goes into download mode 99.999% of the time the phone
can be flashed successfully using Odin.
The main reasons for usb issues in "download mode" are either loose connection to computer's usb ports,
usb cable intermittant or the Samsung usb drivers in the computer are corrupted in one way or another.
Thanks again
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
empire-1 said:
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
Click to expand...
Click to collapse
You are in a tough spot. I don't know if you have the stock recovery or not but if not you can either download the stock rom on the phone again...you know the best way although unethical really...being that the usb port is down is to re root it and flash a rom like the gt 1300 or whatever the international version is and intentionally hard brick your phone. Hard brick meaning won't even turn on withOut jtag and that even just clears everything out and reloads software like from the factory.If the phone won't boot up then there's no way for the person to tell its been modified. Majority of the time samsung doesn't get the damaged phones its some idiot making 8 bucks an hour to refurbish phones. That's what I would suggest you do being that the counter is still saying one flash
tmobile s3 running wicked. best rom i've ever used
Pretty sure I'm on stock recovery. it does give me an option to "apply update from external storage"
Thanks for all your help, I'll try to flash the stock rooted rom through the stock recovery although i'm not optimistic.
I will check out the wicked rom you mentioned, although I am a little hesitant to root my new one after this ordeal.
but how do I re root it if I have no usb or custom recovery?
re: flashing
empire-1 said:
but how do I re root it if I have no usb or custom recovery?
Click to expand...
Click to collapse
If you can get your phone to boot normally with any stock rom rooting will not be a problem at all.
If you get the phone working and booting properly you would be very lucky but from reading
everything you have wrote so far I highly doubt that you can successfully flash any rom at all
unless you have forgotten to tell us something.
Don't worry about rooting, worry about getting the phone to boot and work properly with stock rom.
yep. running stock recovery. hopeless?
re: flashing
empire-1 said:
yep. running stock recovery. hopeless?
Click to expand...
Click to collapse
I never said a word about stock recovery, I said STOCK ROM.
Invest in a JIG, it puts your phone into download mode instantly even if you cannot
do it manually with the three buttons as long as the phone is not completely dead.
You can buy a jig for less than $4.00 shipped on eBay, it's great little tool.
All you do is remove the battery from the phone and put it back in then simply plug
the jig into the usb port then in a couple seconds it will be in download mode then you
can unplug the jig and the phone is ready to be odin flashed..
Remember what I said before, just because the usb did not work with some
rom you flashed it does not mean that it will not work for download mode.
The jig was one of the best investments I have made when I started using these samsung android phones.
Once in download mode it will allow you flash the stock or stock rooted Jellybean 4.1.1 rom.
This is my best advice.
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
re: flashing
empire-1 said:
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
Click to expand...
Click to collapse
Before sending it back, if I were you I would find a friend or family member who has
a windows computer and just for the hell of it install the usb drivers in the computer
just to see for sure that while in download mode and connected usb cable if Odin still
is not lighting up the [COM:xx] top left rectangle on Odin screen.
I have odin flashed many phones dozens of times in the past 3 years and I have yet
to come accross one which goes into download mode but odin is not reconized
unless there is something wrong with the windows computer or usb ports and drivers.
That only happens as I said before, if there is something wrong with the drivers,
usb ports and or usb cables or some other malfunction in the windows computer.
Just think, if it works no need send the phone to samsung plus you would have learned
something too.
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
re: well that's it!
empire-1 said:
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
Click to expand...
Click to collapse
This is the first I heard that the usb did not work before and the usb socket might be broke.!!!
In that case since you cannot use the Wifi in your phone to transfer and install apps since it cannot boot normally
(unless I am missing something again) and you cannot use usb and it would not even help to remove the external
sd and copy any apps at all since you would have no way to install the apps.
Then you are right, you have to send it back, exchange it and hopefully you can come up
with a good enough excuse why it's not working so samsung will not charge anything )which I doubt)
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
empire-1 said:
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
Click to expand...
Click to collapse
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Josh McGrath said:
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Click to expand...
Click to collapse
Can you flash it through mobile odin? I don't know anything about the mobile version.
tmobile s3 running wicked. best rom i've ever used
So i was trying to find some new roms for my SGH-i747M and what i did was backed up my original rom running on a avatar nightly build i tried to upgrade my clockworkmod touch to the latest version using the terminal method (cause i was getting status 7 errors from all the other roms). I finally got the install the work then when i reboot the rom doesn't work i tried going back into CMW recovery and it just crashes and for some reason the computer can't recognize the phone so i can't unbrick it.... what do i do now totally scrub
Have you tried odin
duoblade said:
So i was trying to find some new roms for my SGH-i747M and what i did was backed up my original rom running on a avatar nightly build i tried to upgrade my clockworkmod touch to the latest version using the terminal method (cause i was getting status 7 errors from all the other roms). I finally got the install the work then when i reboot the rom doesn't work i tried going back into CMW recovery and it just crashes and for some reason the computer can't recognize the phone so i can't unbrick it.... what do i do now totally scrub
Click to expand...
Click to collapse
Hey try downloading the stock firmware and used Odin flash it on
What stock ROM was on your phone before you update CWM? It's important to let us know so we can help guide you in the right direction.
Can you get into download mode at all? Have you tried the debrick method described in this forum?
tried everything(mostly)
audit13 said:
What stock ROM was on your phone before you update CWM? It's important to let us know so we can help guide you in the right direction.
Can you get into download mode at all? Have you tried the debrick method described in this forum?
Click to expand...
Click to collapse
I've tried odin and stock rom but the thing is i don't think my usb debugging is on so odin and my computer can't access the components inside the phone, i've tried unistalling drivers and trying to reconnect it but no luck... my stock rom on my phone was a avatar 4.0 nightly build or something (4.3 version) and my old CMW was 6.0.3( or something before i tried to get the 6.0.4) now i can't even get it to work when i tried to flash the slimkat rom
i can't get into CMW recovery.... when i try it restarts, when it restarts all i get is a black screen i think i'm screwed here
Try different drivers, cables and usb ports. Usb debugging only matters when you are booted into android. Shouldn't have any effect on download mode.
duoblade said:
I've tried odin and stock rom but the thing is i don't think my usb debugging is on so odin and my computer can't access the components inside the phone, i've tried unistalling drivers and trying to reconnect it but no luck... my stock rom on my phone was a avatar 4.0 nightly build or something (4.3 version) and my old CMW was 6.0.3( or something before i tried to get the 6.0.4) now i can't even get it to work when i tried to flash the slimkat rom
i can't get into CMW recovery.... when i try it restarts, when it restarts all i get is a black screen i think i'm screwed here
Click to expand...
Click to collapse
Can you get into download? From what I recall with my phone USB debugging was not needed to flash ROMs via Odin or CWM.
i've tried
DocHoliday77 said:
Try different drivers, cables and usb ports. Usb debugging only matters when you are booted into android. Shouldn't have any effect on download mode.
Click to expand...
Click to collapse
i've tried different port different cables different computers i've tried reinstalling the drivers and using different installations nothing seems to be making the phone readable, and yes i can get into download mode but odin or the computer can't detect which port it is on
How are you reinstalling drivers? You have to uninstall through device manager. And make sure your cables are data cables. Many out there are not capable of data transfers. Unless the port on the device has gone bad or been damaged, I'm not sure what else you can try. But if it cannot connect on any port on any computer, I think it may be a hardware issue like I just mentioned.
Did you try different driver versions? You can get several from the link in my sig.
What about trying different operating systems (i.e. WinXP, Win7, OSX, etc.)?
Could be worth a shot. Odin is Windows only though. I think heimdall works for the rest.
try what i can
DocHoliday77 said:
Could be worth a shot. Odin is Windows only though. I think heimdall works for the rest.
Click to expand...
Click to collapse
audit13 said:
What about trying different operating systems (i.e. WinXP, Win7, OSX, etc.)?
Click to expand...
Click to collapse
i've tried switching between the two operating system(windows 7(labtop), windows 8.1(desktop)) don't seem to be working neither have worked i tried installing the driver again on windows but the phone still can't read if anything imma try this method http://forum.xda-developers.com/showthread.php?t=2549068 but idk what the results will yield w/e take what i can get btw idk where the samsung driver would be in device manager at least the general heading if it doesn't show up at all...
wow wtf
never mind guys it was the usb cable it's weird its the stock cable that came with the s3 and it didn't work it was only after i used my bros s4 mini cable that it started to read it wtf...
Cables go bad far more easily and frequently than most people believe. Glad you figured it out!
I've had this old note II pretty much since it came out have had plenty of ROMS on it and normally have had no problems. I recently had SlimKat on there and I was having battery life issues so I reinstalled it to no avail, so then I tried moving to Blisspop and that fixed the battery life issue some but I was having issues with crashing and the proximity sensor not registering during calls. I found a thread with this issue that directed me to Shift Kernal as a solution to the proximity sensor and crashing issues. I reflashed Blisspop, flashed the Shift kernel, then Gapps and now I have a brick. Upon turning on the phone it gets stuck on the Samsung boot screen. It won't open CWM recovery anymore to access my nandroid backups. I can get it into download mode but I cannot get my computer to recognize the phone as a USB device anymore. I have tried different drivers, cords, usb ports, and even different computers so I assume thats not the issue. Any suggestions would be helpful or even just telling me its a definite hard brick so I'll quit tinkering with it.
If you can get DL MODE it's not a brick...
Reflash of a stock rom via Odin should help...
Device could have partition damage...but I'd avoid the PIT flash until after the stock rom attempt..
I don't know what bootloader you have...but if you have version 4.2 or lower then flash a complete stock rom..
If you have 4.3 official or higher...then use an ODIN version from Zen Arcades threads as they don't contain the loader image...g
gregsarg said:
If you can get DL MODE it's not a brick...
Reflash of a stock rom via Odin should help...
Device could have partition damage...but I'd avoid the PIT flash until after the stock rom attempt..
I don't know what bootloader you have...but if you have version 4.2 or lower then flash a complete stock rom..
If you have 4.3 official or higher...then use an ODIN version from Zen Arcades threads as they don't contain the loader image...g
Click to expand...
Click to collapse
I can get it into download mode but when I connect it to a computer its not recognized as a device and therefore doesn't show in ODIN to flash those ROMs. Is there anyway to force recognition of a USB device. I've tried pretty much every combination of cord, usb port, driver and computer to get it to connect to ODIN but haven't had any luck.
hlhastie09 said:
I can get it into download mode but when I connect it to a computer its not recognized as a device and therefore doesn't show in ODIN to flash those ROMs. Is there anyway to force recognition of a USB device. I've tried pretty much every combination of cord, usb port, driver and computer to get it to connect to ODIN but haven't had any luck.
Click to expand...
Click to collapse
Ouch...
Well....beyond switching versions of Odin...(you've likely done this already)...the only action you could take would be a direct ADB push to the device...
It's been 2 years since I've attempted that...and can't remember the thread locations for the tutorials.
There is also the possibility that the EMMC is damaged.
My second device had this failure and I never recovered it...
I'm sorry that I can't provide links...but I know the threads exist.
So start a search and I'll do the same...g
Edit:
I keep coming back too a PC environment problem...(perhaps)
Run Odin as admin only...and quadruple check those USB drivers...making sure to completely uninstall the old version before loading new drivers.
Also..try using Odin 1.85....not 3.09...as it is a bit more reliable.
Also use only a factory cable connected to the PC mother board only...no front ports...
Plug in the device in download mode then reboot the PC and then open Odin...
Brainstorming here and hoping it'll trigger that dang "added" symbol for ya....g
Thanks I'll try those and see what happens!
I prefer Odin 3.07 on a Win7 machine.
I see the thing...
You damaged your bootloader, try re-flashing it through Fastboot on ADB, if tour pc does not recognize the device then try to install the latest USB drivers for your model.
Sent from my VF-895N using XDA Free mobile app