[Q] [ACRO S] Black screen, no respoding after instaling kernell. - Sony Xperia S, Acro S, Ion

Hi all
My phone is not responding, after unpuging USB cable when i instaled kernell from this pack: http://forum.xda-developers.com/showthread.php?t=2411343
1. I unlocked bootloder using fastboot and this go fine.
2. After that i use flashtool to instal kernel, and this also go well but after i instal kerlle the usb cable was unplug and then i got this black screen.
Now i got black screen on power on. The power button dosnt work normally.
Phone is not recognized in PC or Flashtool.
Only two combinations of keys work:
Pwr + vol + = reset of the phone, after reset it is a short time when Sony logo came up, and purple led flesh once.
Pwr and vol up and down = phone is shutdown
Is this some wat to rescu this phone? Or i got one, nice looking brick?
P.s. Sorry for my english.

elcidx said:
Hi all
My phone is not responding, after unpuging USB cable when i instaled kernell from this pack: http://forum.xda-developers.com/showthread.php?t=2411343
1. I unlocked bootloder using fastboot and this go fine.
2. After that i use flashtool to instal kernel, and this also go well but after i instal kerlle the usb cable was unplug and then i got this black screen.
Now i got black screen on power on. The power button dosnt work normally.
Phone is not recognized in PC or Flashtool.
Only two combinations of keys work:
Pwr + vol + = reset of the phone, after reset it is a short time when Sony logo came up, and purple led flesh once.
Pwr and vol up and down = phone is shutdown
Is this some wat to rescu this phone? Or i got one, nice looking brick?
P.s. Sorry for my english.
Click to expand...
Click to collapse
you need to install the rom ... not only the kernel ... once the purple led comes press the volume up key , it'll take you to the recovery . Do a factory reset and then install the rom ..

Related

WSOD??

Hi guys,
I'm gonna need your help here if its possible.
I have a Sony Xperia S, with default firmware/rom etc..
Suddenly the phone shows only a white screen. I can shut it down by pressing vol + and power. But if i boot again only a white screen appears (No Sony logo). Phone is also not found when connected to a PC with USB.
Entering recovery is also not possible. When i pres vol + and the power button a blue light flashes but again...the white screen appears.
Anybody having some tips?
Sector51 said:
Hi guys,
I'm gonna need your help here if its possible.
I have a Sony Xperia S, with default firmware/rom etc..
Suddenly the phone shows only a white screen. I can shut it down by pressing vol + and power. But if i boot again only a white screen appears (No Sony logo). Phone is also not found when connected to a PC with USB.
Entering recovery is also not possible. When i pres vol + and the power button a blue light flashes but again...the white screen appears.
Anybody having some tips?
Click to expand...
Click to collapse
Try entering flashmode instead by holding voldown+plugging in usb. Then flash a new firmware with flashtool

[Q] Stuck logo LG and can not hard reset ?

hi all.
My LG optimus G F180S Korea version can't start, it get stuck at logo LG. I have already read about this error: "stuck at logo LG", the aswear is use hard reset, but I can not hard reset my phone by press Down volume and Power button
Can anyone help me solve problem?
thanks in advance!
Make sure your phone is turn off. If u not sure, press Power about 10s. After, Pressing Volume - and Power. Goodluck.
phamluong92 said:
Make sure your phone is turn off. If u not sure, press Power about 10s. After, Pressing Volume - and Power. Goodluck.
Click to expand...
Click to collapse
unluckily, I can not hard reset by pressing volume down and power
DO U have another method?
thanks!
for hard reset on stock cwm : turn phone off. press vol up + vol down + power.
I had the same problem. I even got worse and the phone wouldn't even turn on. So what worked for me is this:
I put the phone in download mode (Vol Up + Vol Down and then plug the usb)
After that I open LG Mobile Support tool. http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
Wait for the program to detect the phone then go to Options-> Upgrade Recovery. Wait for the process to finish.
After it finished the phone loaded normally and everything was intact. All my files and apps were untouched.

EMERGENCY Brick!

hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.

[T110] black screen with usb sound

hi every one
i have samsung sm-110 i have rooted it using odin3 and its goes smothing succes
after maybe 1 month i got update for superuser (i press update by cwm or some thing like this HTC
then the device boot on recovery mood v6.0.4.8 and when ever i restart its boot on recovery mood after show device model logo its boot on recovery so i try to flash the device using oden3 i download offical rom and when i make device on download mood i click start on odin i get failed
so i try to Disconnect and reconnect then press start no thing happen i just Disconnect and try to restart the sm-t110 br press (v down +home + power)
i got black screen (when i connect the sm-t110 to the laptop i got usb sound but with black screen)
i try to press (v up + power + home ) i get ( Disconnect and reconnect usb sound with black screen on sm-t110)
and odin3 didnt read the device any more
sry for bad english i hope u guys understand and thanks

xperia t3 ( D5106 ) brick after update via OTA

Hello everyone , I have a big problem, my xperia t3 ( D5106 ) when updating via ota the phone was turned off and not lit more, also to connect the charger, USB cable does not turn on any light , I tried to flash with flashtool (hold button on + volume down) and does not enter flash mode , the computer recognizes the phone ( SEMC fLASH DEVICE ) .
I tried using PC Companion , flashtool , changing computer and USB cable , it still does not work.
I hope your help, you are well ..
did you try to make a hard reset, by holding the power button and the vol+ key. you stay with the two buttons pressed and have to wait a long time before the phone vibrate a first time an after three short times. that's it, the phone is well reset and ready to enter in flash mode.
dan15 said:
did you try to make a hard reset, by holding the power button and the vol+ key. you stay with the two buttons pressed and have to wait a long time before the phone vibrate a first time an after three short times. that's it, the phone is well reset and ready to enter in flash mode.
Click to expand...
Click to collapse
thanks for answering, I tried with power button + volume overnight and does not vibrate, it has charged a whole day.

Categories

Resources