Develop Bugs

Stock recovery overwriting CWM

Hi guys,
I've tried to root my device using this thread: http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2
I used method 2 because I wanted CWM.
I found that when Odin reboots the phone it goes straight into Android itself, not the recovery CWM. I disabled the autoreboot and flashed again and manually rebooted but still my stock recovery persists, not CWM.
What can I do to get CWM?
Thanks in advance!

It should work.
Sent from my GT-N7100 using xda app-developers app

It will have CWM flashed. Maybe you should just tick the auto reboot option then when the OS loads up shut down your note and boot to Recovery.

SethCode'z said:
It will have CWM flashed. Maybe you should just tick the auto reboot option then when the OS loads up shut down your note and boot to Recovery.
Click to expand...
Click to collapse
when I boot into recovery it's the stock one, but it shows the status as custom. And the count increases with each time I run it through the ODIN process.
Any advice guys?

Maybe your flashable odin cwm file does not properly work. Something is wrong, Try to reset your flash counter with Triangle Away. Then proceed with installation.

SethCode'z said:
Maybe your flashable odin cwm file does not properly work. Something is wrong, Try to reset your flash counter with Triangle Away. Then proceed with installation.
Click to expand...
Click to collapse
Thanks for the help thus far! Just a question, does the flash counter value matter? Or can we continue flashing on top without harm?

RashidD said:
Thanks for the help thus far! Just a question, does the flash counter value matter? Or can we continue flashing on top without harm?
Click to expand...
Click to collapse
It matters for me, I have an S3 mini and when my counter goes up, I can't use my back and menu buttons. In some cases you can just continue flashing.
Sent from 12*.5x.**.58

SethCode'z said:
It matters for me, I have an S3 mini and when my counter goes up, I can't use my back and menu buttons. In some cases you can just continue flashing.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
Oh I finally got it working... I used CF-autoroot to get superSU and then used rom manager to update CWM and flash it. Disabled the stock recovery. Finally!!!

RashidD said:
Oh I finally got it working... I used CF-autoroot to get superSU and then used rom manager to update CWM and flash it. Disabled the stock recovery. Finally!!!
Click to expand...
Click to collapse
I had to donit the same way...flashed a pretty rooted ROM...then using mobile Odin and latest philz touch I flashed it and it works..

Something weird

Hi guys i had the Note 5120 running 4.1.2 and all the while rooted with Framaroot 1.60 and had install multi window manager. I did not install custom recovery so i did not have any backups made as im just a simple user and will make use of the root for some enhancements. Today i installed font installer https://play.google.com/store/apps/details?id=com.jrummy.font.installer. After i chose my desire font, it request for a reboot and i did.
That is where the problem arised. My device is now stuck at the welcome screen with the word Samsung glowing and thats about it. I had done a hard reset but still the same. And i didnt manage to get any further info of my built and anything else *sigh*.
Anyone here be able to help me on this as that is all the rooting i have done on this phone. Never tried Odin or anything else. Hopefully some can help revive my 8 days old Note

Your device is in a bootloop. Reflash your stock ROM.

Lim Wee Huat said:
Your device is in a bootloop. Reflash your stock ROM.
Click to expand...
Click to collapse
Just as i found out about it. I am currently downloading the stock rom from sammobile. Just to be sure that i can place the stock rom in my ext sd card and use stock recovery to flash it after i rename it as update.zip?

you can just do a factory reset in stock recovery and your tablet will go back to factory fresh status..dont bother downloading or flashing anything, just factory reset and you are back to square one

In most cases, you need to extract the tar.md5 file from zip and flash using odin.
Sent from my GT-N5120 using xda app-developers app

wase4711 said:
you can just do a factory reset in stock recovery and your tablet will go back to factory fresh status..dont bother downloading or flashing anything, just factory reset and you are back to square one
Click to expand...
Click to collapse
it doesnt work for me. it will end up with the same again with the word SAMSUNG.

mayday2 said:
In most cases, you need to extract the tar.md5 file from zip and flash using odin.
Sent from my GT-N5120 using xda app-developers app
Click to expand...
Click to collapse
So i need to use odin to flash the stock rom that i have located for my device. Flashing from stock recovery wont work yah.
Edited: My device is now up and running. Flashed the right firmware via Odin. Thanks to you guys!

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.

Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.

QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe

louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.

Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone

Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!

No recovery stuck on bootloop
im having the same issue could you post that dropbox link again

So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader

Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?

louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out

my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app

yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse

hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.

QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help

yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse

For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).

Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it

[Q] TWRP 2.6.3.1 Asks for password

I woke up this morning to my phone perpetually rebooting.
I was running a nightly of CM 11.
Now when I try to go into Recovery I get a screen that asks for a password. I have no idea what that password is as I did not set one. I tried wiping data to no avail. I tried flashing a new recovery via Odin this did not work (Odin said successful but the screen on the phone never showed the transfer of the file). No matter what wipe method I use in recovery it just says fail, doesn't work at all and hangs or will say it can't mount. I have searched and searched and tried and tried and I'm stuck. I even tried ADB that didn't work either. Please help!

Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att

audit13 said:
Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.

therecker said:
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.
Click to expand...
Click to collapse
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This did not work. When I use ODIN all that is happening is that ODIN says it has succeeded but the little progress bar that usually shows up on the phone when you are in download mode never comes up. I did try this method though and it didn't work.
I restarted the phone in ODIN mode then opened ODIN then connected the USB cable then unchecked the two boxes you mentioned then flashed a new non TWRP recovery then waited for ODIN to say successful then the phone never showed the progress bar so I waited 2 mins until I pulled the battery then I restarted phone directly to recovery and still have the password prompt. Even after hitting cancel I cannot interact with recovery because every option I choose just says fail. I cannot even mount external sd card.

What phone do you have? What was the most recent stock ROM on your phone? Maybe you can flash a stock ROM.

There is a copy of the stock Samsung 3e recovery (which we can't use to flash zips with) I'm curious if maybe it can overwrite what you have going on? On the password screen I wasn't hitting cancel I was simply hitting the back arrow key. I will see if I have a copy of the stock recovery, just maybe you can flash it then flash another recovery after that so you can fix your phone.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I have Samsung Galaxy S 3 At&T (d2att) SGH-I747 whichever one of those you want. The most recent stock rom on the phone was when I bought it brand new a few months after it came out. I tried installing a stock rom. I tried this using ODIN and it failed. The issue here is that TWRP somehow encrypted the entire file system so NOTHING at all in recovery works. When I use ODIN mode it never shows on my phone that it is accepting a transfer from the computer. When I tried the stock rom via ODIN method it actually failed in ODIN instead of telling me it succeeded and then just not work. It failed at the point when it says Firmware Update Start...aboot.mbn...NAND Write Start!...Complete(Write) operation failed. I am up for any suggestions but I need them to be detailed instructions because I have tried so many things I need to know what exact steps to follow.

I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.

audit13 said:
I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.
Click to expand...
Click to collapse
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?

therecker said:
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?
Click to expand...
Click to collapse
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?

audit13 said:
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?
Click to expand...
Click to collapse
It was a CM11 Nightly ROM from the very beginning of February. And before that it was a CM10.2 Stable ROM.

Which stock ROM was on your phone before you loaded a custom ROM?

audit13 said:
Which stock ROM was on your phone before you loaded a custom ROM?
Click to expand...
Click to collapse
I have no idea. It was when I first got the phone in November of 2012.

Sounds like your phone may be running a 4.3 bootloader which means your bootloader is locked and cannot be downgraded. This may explain why you are getting errors when trying to flash Odin. There is no stock AT&T 4.3 ROM that can be flashed via Odin.

Help...semibrick or not?

Hi,
All was good in the SM-T705 world rocking 5.0.2 Rooted Stock.
But one day, decided to take the plonge and update to the 5.1.1 Unnoficial CM12.1 to try things out.
Well, all was good, but kinda lost the 4G connectivity (even after flashing the radio file provided on the thread)
So i decided to try again something, and start from Stock again.
Got myself the latest 5.0.2 image from kies and "odin it away".
Everything ok with the flash, but the device remains on the boot screen ....meaning bootloop.
Never seen a bootloop on a stock flash.
When bootlooping, i can only access download mode/recovery. Nothing else works.
Any hints?
Thanks guys.

Bootloader maybe?

rookie12 said:
Bootloader maybe?
Click to expand...
Click to collapse
Any hint how to fix this?

Idk ask a prof
Maybe flash the whole frimware via odin again

I advice you to download a stock firmware (or at least a TW based one) from here in the forum, instead of Kies.
You can try also first with a manual EXT4 reformat of System, Data and Cache though Recovery. Do NOT touch other partitions.
Then reinstall with Odin, NO tick on repartition.
It must work

Thank you guys for all your replies.
Thing is, i cant seem to be able to flash twrp. I do it through Odin and goea fine, but when it reboots it is overriding to the stock recovery again (since it can't complete the stock flash boot process)
That would be the desired scenario, since I even have a twrp backup that I'm wishing to restore.
Any other ideas?

You need to boot to twrp immediately after flashing or recovery will be overwritten with stock.
Second, once in recovery wipe data and you should be good to go.

ashyx said:
You need to boot to twrp immediately after flashing or recovery will be overwritten with stock.
Second, once in recovery wipe data and you should be good to go.
Click to expand...
Click to collapse
Got my tab back.
Thank you very much for all your help...that's why xda works most of the time.
Sent from my SM-T705 using XDA Free mobile app