[Q] Rooted G510-0200 stuck at logo - Huawei Ascend P6, Mate

I am using Huawei G 510-0200 in Pakistan. I had rooted my cell phone and was converting a user app into system app via Titanium backup. The process was taking long time so force closed Titanium Backup app. This caused phone crash and it restarted and hung up at huawei logo.
Now i tried factory data reset and clearing cache in Power and Volume + key mode. It did not work. I tried applying update (two different roms, one custom pakistani rom and other was normal g510-0200 rom) in the same mode but it shows installation aborted.
I tried Forced Firmware Update mode too. I placed update.app file in the sd card and restarted cell phone by holding Volume+, Volume- and Power key. In that mode, it shows unpacking Step 1/2 for a while and then instead of installing, it shows Update Failed.
Error log shows this:
filename = /mmc1/dload/update.app call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST CMD=0xf,moduleaddr = 0xd2000000, len_tmp=0x4000
:crying:
I have tried everywhere and I'll be really greatful if anyone can sort this out for me.

Related

G pro, spyware

To start off,
i would like to say im not some kind of paranoid freak who thinks the gov or ordinary people around me is spying on me.. lol
Im fairly new to this android world, and got this phone, less than a month ago. from a ... doubtful friend.
The phone always booted twice on startup, and it installed apps with out telling me like "Muted camera".,,which i caught probally by rebooting the
phone right after reset. and a error popping up, that the install file was invalid.
I rooted it (I think.. I rooted it.. or could be PRE rooted. Never checked) ,
checked system but couldn't find out anything useful..
i deleted all the dalek? cache and factory reset, formatted external sd in cwm
but still.. freaked out when i found out that my personal files.. such as photos videos were still present (was on the internal memory)
the external, was formatted..
so i got the lg firmware update on pc
put the kdz file,
settings were:
3g QCT & mode was CS emergency
ran it in Download mode.
Still.. this seemed to only reset the system settings..
the phone itself wasn't wiped..
However, after i reset it with kdz file
The security? error of some sort popping up between the two reboot, was gone. however the two reboot was still present,.
Before;
Turn on phone => security error, (in terminal typed ..interface with black background) => phone shutdown => boot again automatically => LG logo => turn on
After the kdz file recovery:
Turn on phone => Lg logo => phone off => on again automatically with lg logo => lg boot animation and normal booting
Now, my ram and battery usage is still abnormal.
resetted the phone in software os level, (in settings)
Nothing.. seems to help
any.. suggestions?;;

[Q] How can I update the software?

Hi all,
I am trying to update my 10.1 tab 3 device through the relevant entry in settings, but I get an error about my "device is modified".
I hard reseted the device, and I am still getting the same error. What can be happening?
Maybe you have root your tablet or install new recovery ?
Press and hold power, home, and volume down. You will see a warning screen then press volume up to enter Odin mode on the tablet and check the binary number. If its not 0 your device is modified and you can't update it. You must restore the original Samsung firmware without Root or something else on your device.
No, I have not rooted my tablet. I have only isntalled a few apps from the play store.
I tried to hard reset a few times without any success. I think that erasing everything from the sd card, solved the problem (after a hard reset).
I don't know why, and which app has placed what on the sd card.
I had really few apps, kindle, skype, oasvn, and some apps related to night sky maps. And the official vnc viewer app.

[HELP] "Android system has sttoped working" loop 2 seconds, unable to use screen.

[HELP] "Android system has sttoped working" loop 2 seconds, unable to use screen.
Hello,
Lg g3 (Telefónica / Movistar branded Spanish carrier)
Bought in Jul 2014.
Weeks having reset problems, one day, on a reset, got the msg "Android system stopped working", close, 2 seconds, again same msg, I can't use ths screen to avoid it, just to close the msg window, neither to browse options in those 2 seconds in each loop. I can only use the turn on/off buton, so, when I reset, same stuff again..
I tried to use Recovery Mode (vol-) and I just get the option to restore and WIPE ALL INFO (even files, pics, etc..)... no more options
Tried Lg Suite + Download mode (I can enter in download mode) but the software don't recognice the device.... using original cable,
I need the stuff inside, don't care about the phone thou, will get a new one, but I really need the info inside (no SD, the info inside the internal storage).
Any help?
If you turn off the device, hold down power and volume down. Release them when the lg logo shows then immediately press them again you should get to a factory reset screen. Try performing a factory reset, this will not wipe your files, just all apps and app data
Hi,
thanks for the answer.
that was my first hint, but, as you can see ( imgur.com/ d31OXJi) that menu option says "Delete all user data (including LG and carrier apps) and reset all settings?"..
I do belive this is warning me about wipe all my data including pics, videos, contacts, etc...
Are you 100% sure that wthis will not wipe the entire information?¿
Thanks...
BUMP!
Can anyone help me or confirm us if I do the vol down restart to factory will wipe my pics away??
Thanks...
Really? Noone ever have restored the phone using this option on a g3 to know if the pics will be deleted or not? amazing...

Locked bootloader, encrypted, Restarts,No recovery,HELP

I have Realme 3(android10 OS/MediaTek Helio P70/brought it in May 2019)(encrypted)
phone started creating problem fore from 7/7/2020,when realme 3 phone is switched on it Starts on screen after entering password it comes phone storage need to be cleanup and I can operate it for few Seconds (but can't uninstall apps,delete videos files) and then it restart again and keeps on doing,it starts then can use phone for few seconds (can't make any changes in device)And restart again in few seconds and this process keeps continuing then I make it power off even in power off sometime it get switched on without switching it on.
I tried pressing phone(Realme 3)volume down and Power button, it show recovery mode on left side but then phone switch off and restarts again.
i am fearing most important data loss(unbackup)
Local technicians and service centre saying data can't be recovered and need to do flashing using SP flash tool
Can I recover all my phone Data like whatsapp & its data,apps,messages, videos,photos,contacts, documents files even if There is problem with locked bootloader/ software/firmware corrupted/ error?

Motorola One Action auto update failed now stuck on "Just a sec..."

Hi,
My Motorola One Action is original (so no custom firmware or rooted) and every now and then i receive auto updates. Recently the phone was upgraded to Android 11. Fine.
Last weekend there was an update and in the morning the phone was stuck on Android bootloader with the question "format" or "retry" (cannot remember exactly, but it was 2 questions) and i chose "retry". The device rebooted; android logo showed up and then the google/android assistant showed up with the notification "Hello" and a lanuage selector.
I choose NL or EN and then a white screen with "Just a sec..." appears and this screen will stay there forever. I put the phone on charger and waited 30 hours, still the same.
What i tried:
- reboot;
- press & hold power button long time; reboot;
- turn off and then volume Down + Power key bootloader. There isnt much i can do here;
- from screen above; go to fastboot mode (volume Up + power) but unfortunately there is no whipe cache option; only whipe data / factory reset.
FYI: there are still a lot of photo's on the device; i dont want a factory reset and/or whipe data.
I put device in bootloader mode again, connect with usb and installed "Rescue and Smart Assistant". The device recognized, IMEI is found and more stuff. In this Windows app i can download the correct firmware; i store it in c:/motorola/firware. The file is troika_reteu_rsbs31.q1-48-36-23-2_subsidy-default_regulatory-default_cfc.xml.zip
The the "Start Rescue" button is shown; but the message "Flashing removes all data from device".
I dont want that so i followed this guide:
The conversion went OK and executed the file generated (.bat), immediately a upload process starts; this takes about 5-6 minutes. After that; a device reboot and still... the same result.
Any tips or advice would be very helpful (i hope).
I found this; looks promising
Moto One Action FRP Bypass Android 11 2022 Google unlock XT2013
How to bypass Google Account Verification - FRP lock on Motorola One Action Android 11 2021 2022 without computer XT2013 Amazon Prime & Factory Unlocked
lgstylo3plus.com
But unfortunately the image browser does not respond.
I have contacted Motorola / Lenovo using their forum. In short their answer is that for almost sure the only way is to completely reset the device that means whiping data.
Is there absolutely no way to access the data partition?
I used ADB to flash a newer and older version of android.
Both version gave a error message directly when phone powered on.
Then i re-installed the current version of android; phone worked again. Unfortunately all data lost.

Categories

Resources