Hi all,
I am trying to update my 10.1 tab 3 device through the relevant entry in settings, but I get an error about my "device is modified".
I hard reseted the device, and I am still getting the same error. What can be happening?
Maybe you have root your tablet or install new recovery ?
Press and hold power, home, and volume down. You will see a warning screen then press volume up to enter Odin mode on the tablet and check the binary number. If its not 0 your device is modified and you can't update it. You must restore the original Samsung firmware without Root or something else on your device.
No, I have not rooted my tablet. I have only isntalled a few apps from the play store.
I tried to hard reset a few times without any success. I think that erasing everything from the sd card, solved the problem (after a hard reset).
I don't know why, and which app has placed what on the sd card.
I had really few apps, kindle, skype, oasvn, and some apps related to night sky maps. And the official vnc viewer app.
Related
Hi all,
I have a standard HTC desire on which I lately have problems with the android market app.
Yesterday I could not download any updates from installed apps - I got the "download failed, try again" message.
I tried to empty the cache from the market app, tried to restart the phone and I also found a suggestion to empty the android_secure folder on the sd-card. That didn't work either.
Then someone suggested I'd reset my phone to factory settings, but unfortunately without succes. Since doing that (both before and after restoring my backup'ed apps and data) I get the same message again. I am not able to update any app I have on my phone at this stage - they are displayed in the market app but downloading fails.
(I was at first able to select apps I already had installed on my phone from the market-website via my laptop browser and have them delivered to my phone, but that stopped working also - it weren't the updates anyway.)
Now every time I start the market app it crashes the first time I start it and then after restarting it displays the message "Application not found" for any app I select (either to be updated or new apps).
Anyone who can help me on this one?
Apparently the problem solved itself. I had the feeling the phone performed much slower though and did another reset to factory settings and since that everything works fine again!
Problem solved...
Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Try resetting it back to factory defaults. You can google it easily.
hypnonaut said:
Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Click to expand...
Click to collapse
my friend has the same problem. did you fix the issue? if so how?
I am using the Apex Launcher but I think this is possible with stock launcher as well hopefully it helps someone. This is one way to do a factory reset is:
You will need your MSL TO DO THIS. If you don't know it put the "Factory Mode" shortcut on your home screen then skip down to the 2nd part of this post & install the msl app.
FACTORY RESET:
1) long click on the home screen
2) click on shortcut
3) select Activities
4)Scroll down to "Factory Mode" tap it then select the dropled down one. This will put a Shortcut on the Home Screen.
5) Find the Factory Mode shortcut you just made & tap it to open it.
6) Dial ##786# then on the screen that pops up
7) select "RESET"
8)enter your msl in the box that popped up then select ok then the device will reboot & when it powers backup it will be like it was from the factory & if you don't know your MSL follow the instructions below.
TO GET MSL:
1) In a browser type bit.ly/mslutility - can sideload if needed
2)install app
3) Open app & click get MSL it will most likely fail this is fine.
4) click on the factory mode shortcut you made to open it
5) dial ##3282# & put in 6 zeros-it will tell you that it's incorrect this is fine. Go back to home screen
6) Open the MSL App & click on Get MSL-this time it should give you your devices 6 digit MSL Code. Write it down. Then do step # 6 above to reset your Device.
This shortcut will allow you to put the Sprint SGT3 into DIAG MODE(##3424#) , get into the ##data#(##3282#) menu, do the factory reset ##RTN# (##786#) & most likely any other Dialer/hidden menu's for this device.
Thanks to the MSL App builder(not sure who it is so let me know please)
Sent from my SGT3 SM-T217S using Tapatalk 4 I Flashed 2 Selectel
What is it trying to update to? 4.2.2?
Levi Woodard
Woodardwoodworks.com
Sent from the XDA premium app.
[HELP] "Android system has sttoped working" loop 2 seconds, unable to use screen.
Hello,
Lg g3 (Telefónica / Movistar branded Spanish carrier)
Bought in Jul 2014.
Weeks having reset problems, one day, on a reset, got the msg "Android system stopped working", close, 2 seconds, again same msg, I can't use ths screen to avoid it, just to close the msg window, neither to browse options in those 2 seconds in each loop. I can only use the turn on/off buton, so, when I reset, same stuff again..
I tried to use Recovery Mode (vol-) and I just get the option to restore and WIPE ALL INFO (even files, pics, etc..)... no more options
Tried Lg Suite + Download mode (I can enter in download mode) but the software don't recognice the device.... using original cable,
I need the stuff inside, don't care about the phone thou, will get a new one, but I really need the info inside (no SD, the info inside the internal storage).
Any help?
If you turn off the device, hold down power and volume down. Release them when the lg logo shows then immediately press them again you should get to a factory reset screen. Try performing a factory reset, this will not wipe your files, just all apps and app data
Hi,
thanks for the answer.
that was my first hint, but, as you can see ( imgur.com/ d31OXJi) that menu option says "Delete all user data (including LG and carrier apps) and reset all settings?"..
I do belive this is warning me about wipe all my data including pics, videos, contacts, etc...
Are you 100% sure that wthis will not wipe the entire information?¿
Thanks...
BUMP!
Can anyone help me or confirm us if I do the vol down restart to factory will wipe my pics away??
Thanks...
Really? Noone ever have restored the phone using this option on a g3 to know if the pics will be deleted or not? amazing...
My tab 3 device is rooted with King0root, that worked well.
I downloaded and installed the root app from Firefox when I was logged into the Tab3 because downloading from Odin in Windows did not work (due to driver problems).
F-secure is installed from Google Play.
Odin also didn't seem to work on other (Windows) computers and I tried the different Odin versions.
The only Odin version that seemed to work was 3.07, but because the status bar was missing on the Tab3 while loading, I knew something went wrong.
After F-Secure was installed, everything first worked well, but that was short-lived.
After about 3 weeks, Tab3 was restarted, F-secure message windows appeared immediately after logging in with the text 'program has stopped' and within a minute the crash and restart.
F-secure stop and delete failed, because the system crashes randomly.
King0root cannot be stopped or deleted either.
In recovery mode, I deleted user data / factory settings and deleted the cache, all of which have no effect.
In safe mode, the apps cannot be stopped or deleted either.
With Heimdall-Frontend I could only flash individual parts from stock ROM on Tab 3.
A status bar was displayed during loading.
But after the flash is completed and Tab 3 is restarted, there is no noticeable change because all added apps remain.
The system also continues to crash randomly.
The only thing that changed after flashing is the date / time that was reset to the build date, that's all.
When flashing 'system.img' it was noticed that the Tab 3 is restarted immediately after completion.
When flashing all the other components, it took a few seconds for Tab 3 to restart.
To me it seems that with such a quick restart 'system.img' will be removed.
That would explain why no 'real' changes were made when restarting after the flash has been completed and the user data has been erased.
Now this thing seems to be 'soft bricked'.
Can someone help me solve this?
Another boot loader was proposed, who can help with that?
xdausernl said:
My tab 3 device is rooted with King0root, that worked well.
I downloaded and installed the root app from Firefox when I was logged into the Tab3 because downloading from Odin in Windows did not work (due to driver problems).
F-secure is installed from Google Play.
Odin also didn't seem to work on other (Windows) computers and I tried the different Odin versions.
The only Odin version that seemed to work was 3.07, but because the status bar was missing on the Tab3 while loading, I knew something went wrong.
After F-Secure was installed, everything first worked well, but that was short-lived.
After about 3 weeks, Tab3 was restarted, F-secure message windows appeared immediately after logging in with the text 'program has stopped' and within a minute the crash and restart.
F-secure stop and delete failed, because the system crashes randomly.
King0root cannot be stopped or deleted either.
In recovery mode, I deleted user data / factory settings and deleted the cache, all of which have no effect.
In safe mode, the apps cannot be stopped or deleted either.
With Heimdall-Frontend I could only flash individual parts from stock ROM on Tab 3.
A status bar was displayed during loading.
But after the flash is completed and Tab 3 is restarted, there is no noticeable change because all added apps remain.
The system also continues to crash randomly.
The only thing that changed after flashing is the date / time that was reset to the build date, that's all.
When flashing 'system.img' it was noticed that the Tab 3 is restarted immediately after completion.
When flashing all the other components, it took a few seconds for Tab 3 to restart.
To me it seems that with such a quick restart 'system.img' will be removed.
That would explain why no 'real' changes were made when restarting after the flash has been completed and the user data has been erased.
Now this thing seems to be 'soft bricked'.
Can someone help me solve this?
Another boot loader was proposed, who can help with that?
Click to expand...
Click to collapse
Today I quit trying to repair the Tab 3 device as hardware starts to fail. The combination 'power' with 'volume up/down' fails, then I guess it's game over. So I discarded the device and checked TechRadar for a new device where quatlity/price is right, combined with black friday offers I now have got myself a Galaxy Tab A 10.1 WiFi tablet.
Hi,
My Motorola One Action is original (so no custom firmware or rooted) and every now and then i receive auto updates. Recently the phone was upgraded to Android 11. Fine.
Last weekend there was an update and in the morning the phone was stuck on Android bootloader with the question "format" or "retry" (cannot remember exactly, but it was 2 questions) and i chose "retry". The device rebooted; android logo showed up and then the google/android assistant showed up with the notification "Hello" and a lanuage selector.
I choose NL or EN and then a white screen with "Just a sec..." appears and this screen will stay there forever. I put the phone on charger and waited 30 hours, still the same.
What i tried:
- reboot;
- press & hold power button long time; reboot;
- turn off and then volume Down + Power key bootloader. There isnt much i can do here;
- from screen above; go to fastboot mode (volume Up + power) but unfortunately there is no whipe cache option; only whipe data / factory reset.
FYI: there are still a lot of photo's on the device; i dont want a factory reset and/or whipe data.
I put device in bootloader mode again, connect with usb and installed "Rescue and Smart Assistant". The device recognized, IMEI is found and more stuff. In this Windows app i can download the correct firmware; i store it in c:/motorola/firware. The file is troika_reteu_rsbs31.q1-48-36-23-2_subsidy-default_regulatory-default_cfc.xml.zip
The the "Start Rescue" button is shown; but the message "Flashing removes all data from device".
I dont want that so i followed this guide:
The conversion went OK and executed the file generated (.bat), immediately a upload process starts; this takes about 5-6 minutes. After that; a device reboot and still... the same result.
Any tips or advice would be very helpful (i hope).
I found this; looks promising
Moto One Action FRP Bypass Android 11 2022 Google unlock XT2013
How to bypass Google Account Verification - FRP lock on Motorola One Action Android 11 2021 2022 without computer XT2013 Amazon Prime & Factory Unlocked
lgstylo3plus.com
But unfortunately the image browser does not respond.
I have contacted Motorola / Lenovo using their forum. In short their answer is that for almost sure the only way is to completely reset the device that means whiping data.
Is there absolutely no way to access the data partition?
I used ADB to flash a newer and older version of android.
Both version gave a error message directly when phone powered on.
Then i re-installed the current version of android; phone worked again. Unfortunately all data lost.