Related
Note2Core Kernel for Galaxy Note II N7100 / N7105 (LTE)
I am posting this here because it works on our LTE notes, since they all use a Qualcomm modem. I am running I on my AT&T note with no issues. All credit goes to g.lewarne - I am just posting here to so he doesn't have to maintain 2 threads. See his original post here
For the moment, exFAT formatted SD cards are NOT supported.
About this kernel
This kernel is built from pure Samsung GT-N7100 source, with modifications and tweaks to provide the best user experience in reliability, performance and stability. Built upon my experience firstly with NoteCore and then HydraCore for the original Note, as many of you know, I strive for the best
There are 4 versions of each kernel, for the International LTE model GT-N7105.
This kernel has all debuging removed - logcat, android log, kernel log, schedular log, etc etc all disabled. This is for performance reasons, so if you are a developer this kernel is probably not for you
Kernel Versions
There are three variants of the kernel for each device
STANDARD (STD) - 1.6ghz FSync() enabled
OVERCLOCK (OC) - 1.8ghz FSync() enabled
EXTREME (EX) - 1.8ghz FSync() disabled
ASYLUM (AS) - 1.920ghz FSync() disabled
The standard version, has no modifications to the processor clocks or voltages and can be considered a direct replacement for the stock kernel, and with FSync() enabled is completely stable
The OC kernel automatically scales up to 1.8ghz, with the proven voltages and stability from the perseus kernel (the same frequency table is used), and with FSync() enabled is completely stable
The EX kernel also scales to 1.8ghz, and has FSync() disabled. It offers by far the best possible performance. In rare circumstances you must be aware that this can lead to data corruption and the need to wipe / reflash a rom back to the phone. 99% of people will have no issues with this, as it has been extensively tested and proven on my previous kernel, but the risk is there. Dont go moaning to me if you lose your data and haven't got a nandroid backup!
The AS kernel is meant for the crazy ones. People who come from an asylum, those from the Note 1 know I am crazy, so this was meant for them. If there is a demand for the 7100 I will build that as well. I am not responsible if you are able to cook bacon on your device after running. It features up to a 1.920ghz over clock, and 640ghz on the GPU, it will go up, however for the moment we will run with 640. The phantom bug is that voltages cannot be set with SetCPU. Neither myself nor gavin know why. The code is spot on. So we don't get it. Lol. The source code is on github.com/glewarne
Kernel Features
- Built from official GT-N7100 sources
- 1.6 / 1.8ghz auto scaling
- Optimised VM memory settings, and global readahead
- Auto-rooting of any rom when flashed, even stock
- init.d script support
- CPU Voltage support through 3rd party apps
- Modified GPU DVFS utilisation steps for maximum GPU performance, far better than stock (this is NOT overclocking!)
- No logging / debugging of any kind for higher performance
- Decreased CPU frequency transition latency
- CRC32 slicing-by-8 algorithm
- SLUB allocator
- PEGASUSQ governor (default, others available)
- NOOP schedular, (default, others available)
- +50mb more free ram compared to all other kernels
- lots of other minor tweaks and changes
- ODIN TAR and CWM ZIPS available for all versions
- TouchWiz roms only
Download - Current Version v1.00
For N7105 (LTE) phones - Links pulled
The latest AsylumCore versions can be found - link pulled
Changelog
Asylum 2.11
-fixed 640 gpu clock(it works now!)
-switched to google 4.7 toolchain
-Note2Core STD, OC remain unchanged. AsylumCore EX and AS versions updated with 640 GPU clocks.
2.10
- Rebuilt from new N7100T source, released Dec 3rd
- All rotation issues in 4.1.2 fixed
- GPU steps reworked for better speed and responsiveness
- Built with linaro 12.11 GCC toolchain, with -O3 optimisation level
- lots of other internal changes
AsylumCore V2.01 - source on github now - github.com/antiochasylum/note2core_asylumcore_note2kernel
- version with *733* in file name is the 733 GPU @ 1150mV
- based off new source code 7100T
- compiled using latest linaro tool chain
- tweaked gpu scaling
- ro.secure=0 - I was tired of typing mount -o remount,rw -t /dev/block/mmcblk0p13 /system everytime to push a modified APK
- voltage bug still present
AsylumCore 1.339
- 1.920 CPU over clock
- 640 GPU clock
- other optimizations
v1.05
- Fixed Voltages
- Other minor changes
- Source is now on github - github.com/glewarne
v1.02
- Fixed video recording
- Added custom boot animation support, to use place desired boot animation in /system/media under *bootanimation.zip*
v1.01
- Fixed video playback for some users.
v1.00
- Initial release
Source Code
Click here
Credits and Thanks
sswagonman for being the bravest of souls, and a good friend
g.lewarne for his encouragement, help and support and friendship
phjz for coding help
Some parts of my code changes can be attributed to the following - Entropy512, franciscofranco, hardcore, gokhanmoral, AnderiLux
If I have forgotten anyone, let me know and ill add you to the list!
Please make sure to only download the 7105 variant of the kernel!!
Nice another kernel! Will test this baby out!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
In testing right. I went straight to extreme and so far lovin it!
sent using gNote II.
Hmm I flashed the OC version on my note 2 seems to be running great but the phone does not see my external sd card :/ just says external card removed safe to remove now even when trying to remount it, my card is formated to exFat not sure if that is the problem
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Love seeing the development...can't wait till my 14 day grace period is up...I got to be good for at least that long:angel::angel::angel:
Mac
turilo said:
Hmm I flashed the OC version on my note 2 seems to be running great but the phone does not see my external sd card :/ just says external card removed safe to remove now even when trying to remount it, my card is formated to exFat not sure if that is the problem
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Yes, exFAT is not supported, we just found out. A fix is coming soon. Also videos in games such as zombie wood don't play. Fixes coming soon.
Nice to see another kernel here.
Can you please update the OP with a link to the original n7100/n7105 kernel thread? (It might make it easier for users to pop over there and see current discussion, etc.)
Also, I'm kind of curious what kind of difference people have noticed by blocking the majority of kernel logging. In theory, it shouldn't make make a significant difference, but I never got around to testing it, so I'm not sure how well the theory applies. (kernel logs aren't backed by persistent storage, so there's no real I/O overhead to it.)
Take care
Gary
turilo said:
Hmm I flashed the OC version on my note 2 seems to be running great but the phone does not see my external sd card :/ just says external card removed safe to remove now even when trying to remount it, my card is formated to exFat not sure if that is the problem
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
So I checked the extfat on extreme and I have access to all files. Also checked the storage under settings and everything looks to be mounted.
sent using gNote II.
garyd9 said:
Nice to see another kernel here.
Can you please update the OP with a link to the original n7100/n7105 kernel thread? (It might make it easier for users to pop over there and see current discussion, etc.)
Also, I'm kind of curious what kind of difference people have noticed by blocking the majority of kernel logging. In theory, it shouldn't make make a significant difference, but I never got around to testing it, so I'm not sure how well the theory applies. (kernel logs aren't backed by persistent storage, so there's no real I/O overhead to it.)
Take care
Gary
Click to expand...
Click to collapse
Its there. Very top where I said I was posting here to help him maintain
Mac11700 said:
Love seeing the development...can't wait till my 14 day grace period is up...I got to be good for at least that long:angel::angel::angel:
Mac
Click to expand...
Click to collapse
+1
Was trying to do the same thing but, already stated custRomizing. Tethering working perfectly. So now on the the kernel for some speed!
Sent from my SAMSUNG-SGH-I317 using xda premium
antiochasylum said:
Please make sure to only download the 7105 variant of the kernel!!
Click to expand...
Click to collapse
Just curious what governor and schedulerare you using....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
blkghost22 said:
Just curious what governor and schedulerare you using....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Using the extreme version, pegasusq and noop.
If you guys try and play a movie in game, of won't work. There is a fox already and I'm running it on my phone. However he is trying to figure out ex fat before another version.
I just flashed this , cleared all my cache prior and after to installing it but for some reason I can't watch a video. ( I know you stated you can't in a game, but I can't in just my gallery)
I installed the OC one.. I will reflash to std one and report back
EDIT: flashed the STD one cleared all caches again and nothing.
Using the ex kernal without oc on dagr8 rom. Getting quadrant of 6700 if it matters to anyone.
Sent from the TermiNOTEr 2!
redrider54 said:
I just flashed this , cleared all my cache prior and after to installing it but for some reason I can't watch a video. ( I know you stated you can't in a game, but I can't in just my gallery)
I installed the OC one.. I will reflash to std one and report back
Click to expand...
Click to collapse
Watch a video in what? The gallery works, you tube works, the only thing that should not is video through a game. Which has been fixed, and uploaded. download the new version 1.01
antiochasylum said:
Watch a video in what? The gallery works, you tube works, the only thing that should not is video through a game. Which has been fixed, and uploaded. download the new version 1.01
Click to expand...
Click to collapse
Yeah I wasn't able to watch a video in my gallery, I just reflashed to the Perseus kernel after another cache wipe and it works again.
I tried both the OC and STD ones you had linked but both would not allow me to watch a video. ( Just gave me an error)
I will download the new version and try thanks!
---------- Post added at 03:21 PM ---------- Previous post was at 03:12 PM ----------
I can CONFIRM V1.01 Has fixed my gallery video playback issues thanks!!!!!!!
Is the 1.01 ok with extFat? Thank you for another great kernel and your work.
borijess said:
Using the ex kernal without oc on dagr8 rom. Getting quadrant of 6700 if it matters to anyone.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
My antutu score was 1000 less than on the perseus Rom. I really don't notice any differences between the two kernels do far though
Sent from my SAMSUNG-SGH-I317 using xda premium
theraker007 said:
My antutu score was 1000 less than on the perseus Rom. I really don't notice any differences between the two kernels do far though
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Mine is 1000 more than persaus. Is any one having issuse with the screen turning off. Mine just stays on and is set to 1 minute. I am running the ex kernal on dagr8 rom.
Sent from the TermiNOTEr 2!
[KERNEL][TW] Note2Core v1.06 -Standard, OC, Extreme,AsylumCore
Note2Core Kernel for Galaxy Note II N7100 / N7105 (LTE)
I am posting this here because it works on our LTE notes, since they all use a Qualcomm modem. I am running on my TMO T889 note with no issues. All credit goes to g.lewarne,antiochasylum - I am just posting here to so he doesn't have to maintain 2 threads. See their original post
Note2core http://forum.xda-developers.com/showthread.php?t=2001838
AsylumCorehttp://forum.xda-developers.com/showthread.php?t=2001936
About this kernel
This kernel is built from pure Samsung GT-N7100 source, with modifications and tweaks to provide the best user experience in reliability, performance and stability. Built upon my experience firstly with NoteCore and then HydraCore for the original Note, as many of you know, I strive for the best
There are 3 versions of each kernel, for the International LTE model GT-N7105.
This kernel has all debuging removed - logcat, android log, kernel log, schedular log, etc etc all disabled. This is for performance reasons, so if you are a developer this kernel is probably not for you
For the moment, exFAT formatted SDCards are not supported
Kernel Versions
There are three variants of the kernel for each device
STANDARD (STD) - 1.6ghz FSync() enabled
OVERCLOCK (OC) - 1.8ghz FSync() enabled
EXTREME (EX) - 1.8ghz FSync() disabled
The standard version, has no modifications to the processor clocks or voltages and can be considered a direct replacement for the stock kernel, and with FSync() enabled is completely stable
The OC kernel automatically scales up to 1.8ghz, with the proven voltages and stability from the perseus kernel (the same frequency table is used), and with FSync() enabled is completely stable
The EX kernel also scales to 1.8ghz, and has FSync() disabled. It offers by far the best possible performance. In rare circumstances you must be aware that this can lead to data corruption and the need to wipe / reflash a rom back to the phone. 99% of people will have no issues with this, as it has been extensively tested and proven on my previous kernel, but the risk is there. Dont go moaning to me if you lose your data and haven't got a nandroid backup!
Kernel Features
- Built from official GT-N7100 sources
- 1.6 / 1.8ghz auto scaling
- Optimised VM memory settings, and global readahead
- Auto-rooting of any rom when flashed, even stock
- init.d script support
- CPU Voltage support through 3rd party apps
- Modified GPU DVFS utilisation steps for maximum GPU performance, far better than stock (this is NOT overclocking!)
- No logging / debugging of any kind for higher performance
- Decreased CPU frequency transition latency
- CRC32 slicing-by-8 algorithm
- SLUB allocator
- PEGASUSQ governor (default, others available)
- NOOP schedular, (default, others available)
- +50mb more free ram compared to all other kernels
- lots of other minor tweaks and changes
- ODIN TAR and CWM ZIPS available for all versions
- TouchWiz roms only
Download -
For N7105 (LTE) phones - http://www.hecubus.com/filelist.php?dir=xda/note2core/7105
AsylumCore can be found http://goo.im/devs/antiochasylum/t0lteatt
Changelog
Asylum V 2.11
-fixed 640 gpu clock(it works now!)
-switched to google 4.7 toolchain
-Note2Core STD, OC remain unchanged. AsylumCore EX and AS versions updated with 640 GPU clocks.
AsylumCore V2.01 - source on github now - github.com/antiochasylum/note2core_asylumcore_note2kernel
- version with *733* in file name is the 733 GPU @ 1150mV
- based off new source code 7100T
- compiled using latest linaro tool chain
- tweaked gpu scaling
- ro.secure=0 - I was tired of typing mount -o remount,rw -t /dev/block/mmcblk0p13 /system everytime to push a modified APK
- voltage bug still present
AsylumCore 1.339
- 1.920 CPU over clock
- 640 GPU clock
- other optimizations
Changelog
V2.10
- Rebuilt from new N7100T source, released Dec 3rd
- All rotation issues in 4.1.2 fixed
- GPU steps reworked for better speed and responsiveness
- Built with linaro 12.11 GCC toolchain, with -O3 optimisation level
- lots of other internal changes
v1.06
-Fixed Triangle Away
- Maybe fixed rotation / sensor issues on some of the new 4.1.2 roms
1.05
- Fixed all voltage setting and reporting problems (you may need to clear app data in your chosen voltage app)
- Swapped to arm-eabi- 4.4.3 google toolchain rather than arm-linux-androideabi- 4.4.3
- Some minor bigfixes
- Decreased bus frequency increase threshold
v1.02
- Fixed video recording
- Added custom boot animation support, to use place desired boot animation in /system/media under *bootanimation.zip*
v1.01
- Fixed video playback for some users.
v1.00
- Initial release
GPL and Source
I dont use GitHub, so I make my entire kernel source, kitchen, build scripts, ramdisks and build tools available in one complete tarball. Also included in the TAR is a standard .patch which anyone can use to apply my changes against their own source tree. Almost everything you need to make your own version of a Note2Core kernel is included in the download - the only exceptions are the required linux packages.
You can download the latest source here - http://www.hecubus.com/filelist.php?...2core/source
Credits and Thanks
sswagonman for being the bravest of souls, and a good friend
antiochasylum for his encouragement, help and support and friendship
phjz for coding help
Some parts of my code changes can be attributed to the following - Entropy512, franciscofranco, hardcore, gokhanmoral, AnderiLux
If I have forgotten anyone, let me know and ill add you to the list!
Make sure download and flash N7015 kennel only and For the moment, exFAT formatted SDCards are not supported.
Thank Gavin and Antiochasylum .All credit go to them
Who the battery life on new kernels
Sent from my SGH-T889 using xda premium
jpeps3 said:
Who the battery life on new kernels
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
so far so good.
simplelife said:
Built upon my experience firstly with NoteCore and then HydraCore for the original Note, as many of you know, I strive for the best
Click to expand...
Click to collapse
For anyone who might not know, HydraCore for the Original Note was by far the fastest & smoothest kernel available. It also gave enhanced battery life compared to stock. I know that sounds improbable to get higher performance even at a higher clock and with better battery life, but it's true!
Unfortunately, I have not had much time to research the implications of swapping kernels (especially since there seems to be added modification detections in place compared to the Note 1) on this phone since I've only had it for a few days now, but when I do this will be my first attempt. Currently I'm just rooted w/o custom recovery but I'm dying to further enhance my phone. :victory:
Best setting for the kernels for best battery
Thanks
Sent from my SGH-T889 using xda premium
k1ng617 said:
For anyone who might not know, HydraCore for the Original Note was by far the fastest & smoothest kernel available. It also gave enhanced battery life compared to stock. I know that sounds improbable to get higher performance even at a higher clock and with better battery life, but it's true!
Unfortunately, I have not had much time to research the implications of swapping kernels (especially since there seems to be added modification detections in place compared to the Note 1) on this phone since I've only had it for a few days now, but when I do this will be my first attempt. Currently I'm just rooted w/o custom recovery but I'm dying to further enhance my phone. :victory:
Click to expand...
Click to collapse
Kennel had both version : Tar file for Odin and CWM for Custom Recovery.
This kernel is insane fast! +8000 on quadrant for those that care
Sent from my SGH-T889 using xda premium
I won't be able to make the jump because I'm leaving for vacation tomorrow and really don't want to kill my phone before hand, but when I get back I'm taking the dive.
A couple questions, if I'm rooted but without custom recovery can I just use mobile Odin or Pc Odin to flash the kernel? Will this give me a custom recovery? Also by doing this will it increase my flash counter?
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 09:29 AM ---------- Previous post was at 09:19 AM ----------
I care lol! I still get some occasional choppiness while using ADW. Does your note run smoother now? Also does it improve the wake up delay/lag?
Sent from my SGH-T889 using xda app-developers app
I don't know anything about Kernels but I always love trying new stuff. I was just wanting to see if anyone could comment on what the author of the perseus kernel said about using this kernel on one of the American variants of the Galaxy Note 2? He said,
"The author completely disregards that the US versions have some hardware changes to them and using the 7105 kernel image on this device can be potentially dangerous as the GPIO pins between the US versions and the international version are different and things like battery charging can break. There are several power and charging differences between the two. It's lucky that this is only the AT&T version as on other carriers it would also break sound and volume. Use at your own choice but it's not something to be recommended."
I'm not trying to stir things up I just want to make sure it's safe to use this long term and I don't know enough about Kernels to know the difference. Thanks.
Sent from my SGH-T889 using Tapatalk 2
Tiffany84 said:
I don't know anything about Kernels but I always love trying new stuff. I was just wanting to see if anyone could comment on what the author of the perseus kernel said about using this kernel on one of the American variants of the Galaxy Note 2? He said,
"The author completely disregards that the US versions have some hardware changes to them and using the 7105 kernel image on this device can be potentially dangerous as the GPIO pins between the US versions and the international version are different and things like battery charging can break. There are several power and charging differences between the two. It's lucky that this is only the AT&T version as on other carriers it would also break sound and volume. Use at your own choice but it's not something to be recommended."
I'm not trying to stir things up I just want to make sure it's safe to use this long term and I don't know enough about Kernels to know the difference. Thanks.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
I flashed it and it seems to be running awesome. No problems yet and its very very smooth.
Sent from my SGH-T889 using xda app-developers app
Flashed it this morning. Seems to be fine
Sent from my SGH-T889 using xda app-developers app
shotchacokov said:
Flashed it this morning. Seems to be fine
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Anyone plugged in some headphones and adjusted volume yet?
Not sure if this is warranted or not (OP I'll delete if you request), but I ran a 7105 kernel on my SGH-T889 and within 24 hours my screen died. Phone still worked, touchscreen worked too, but it didn't light up anymore. Maybe it's a completely unrelated coincidence, just saying what happened to my phone when I was running the wrong kernel.
k1ng617 said:
I won't be able to make the jump because I'm leaving for vacation tomorrow and really don't want to kill my phone before hand, but when I get back I'm taking the dive.
A couple questions, if I'm rooted but without custom recovery can I just use mobile Odin or Pc Odin to flash the kernel? Will this give me a custom recovery? Also by doing this will it increase my flash counter?
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 09:29 AM ---------- Previous post was at 09:19 AM ----------
I care lol! I still get some occasional choppiness while using ADW. Does your note run smoother now? Also does it improve the wake up delay/lag?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Kennel dont do anything with Recovery.
I been test this kennel 2 days to make sure everything work fine ( except cant see 64g EXCARD)before share this great kennel in our forum.
For what i know if you flash via Odin will not raise counter
Tiffany84 said:
I don't know anything about Kernels but I always love trying new stuff. I was just wanting to see if anyone could comment on what the author of the perseus kernel said about using this kernel on one of the American variants of the Galaxy Note 2? He said,
"The author completely disregards that the US versions have some hardware changes to them and using the 7105 kernel image on this device can be potentially dangerous as the GPIO pins between the US versions and the international version are different and things like battery charging can break. There are several power and charging differences between the two. It's lucky that this is only the AT&T version as on other carriers it would also break sound and volume. Use at your own choice but it's not something to be recommended."
I'm not trying to stir things up I just want to make sure it's safe to use this long term and I don't know enough about Kernels to know the difference. Thanks.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
As I said with the otheruser , included today are day 3 with OC kennel and just flash EX version this morning on my note without any issue but you have a choice.
cmenard said:
Anyone plugged in some headphones and adjusted volume yet?
Click to expand...
Click to collapse
Im listening music with headset now work fine.
farfromovin said:
Not sure if this is warranted or not (OP I'll delete if you request), but I ran a 7105 kernel on my SGH-T889 and within 24 hours my screen died. Phone still worked, touchscreen worked too, but it didn't light up anymore. Maybe it's a completely unrelated coincidence, just saying what happened to my phone when I was running the wrong kernel.
Click to expand...
Click to collapse
Boot back CWM , wipe cache / davik, Reboot.Or you can flash back stock kennel to see if still have problem , can get from here
http://forum.xda-developers.com/showthread.php?t=1957380 ( Thank Cmenard )
simplelife said:
Kennel dont do anything with Recovery.
I been test this kennel 2 days to make sure everything work fine ( except cant see 64g EXCARD)before share this great kennel in our forum.
For what i know if you flash via Odin will not raise counter
Click to expand...
Click to collapse
I thought kernels included the recovery, because I've swapped kernels before and it changes my CMW version or just change my recovery entirely.
k1ng617 said:
I thought kernels included the recovery, because I've swapped kernels before and it changes my CMW version or just change my recovery entirely.
Click to expand...
Click to collapse
" No form of recovery I included with the kernel or any custom roms. If you flash cwm recovery it will stay on the phone unless you odin flash a stock rom " This is what Origin Dev said.
Cerux Kernel for TW JB 4.1.2 ROMs:
For Samsung Stock = TouchWiz 4.1.2 ROMs
Features:
Updated kernel to 3.0.66 (will continue updating it as build continues)
OC up 1836 Mhz
GPU OC: 2D 160-266, 3D 266-320 MHz
Kernel msm_thermal control
Force min/max frequency changes for both cores when changes are applied to one core, this is useful for those using built-in performance settings or using a cpu app that changes only core0 while keeping core1 intact. (enabled by default)
Modified ondemand governor with touch boost to have a snappier scrolling/typing, and with a second phase which will go first to configured frequency 1242 MHz before reaching max.
Kernel based mpdecision. This will control CPU secondary core (core 1) hot-plugging and unplugging depending on CPU load
Frandom support
Fixed a bug where phone hard reboot after trying to make a call before device is ready.
Added BadAss governor
Added SmartAssV2 governor
Added Wheatley governor
Added Intellidemand governor
Added V/R scheduler
Added SIO scheduler
Added BFQv6 release 1 (read second post)
Added BLN support (you need software/rom support)
Ondemand is the default governor
BFQ is the default scheduler
Other things I might forgot and will add later
List of commits in 3rd post
Click to expand...
Click to collapse
Download link: http://goo.im/devs/elbermu/cerux_kernel_tw_v1.02_signed.zip
Recommend using this ROM and if coming from a different kernel wipe.
ROM: http://forum.xda-developers.com/showthread.php?t=2249770
Go thanks: @Rushing
Please don't report problems without wiping.
If you get on splash screen after a reboot on any rom try this in recovery:
Code:
adb shell
e2fsck -yfDC0 /dev/block/mmcblk0p25
then reboot.
TricksterMod recommended for the tweaks
Few notes:
To other devs:
Lets play fair, if you are going to use any source of this kernel, make a pull request and/or PM me any findings you have.
To user: don't compare this kernel to other ones, I consider it rude. If you like other, you are free to use them.
No ETAs
No Sweep2Wake... I will look into it later
Don't Hi-Jack my thread...
Source: https://github.com/elbermu/cerux_kernel-touchwiz
Enjoy the kernel.
Since version v1.02 BFQv6r1 has been added and set as default scheduler. Advantages of BFQ:
Low latency for interactive applications - Whatever the background load is, the disk is virtually as responsive as if it was idle. Normally applications experience high latencies or become unresponsive until the workload terminates (especially SSDs)
Low latency for soft real-time applications - soft real-time applications, such as audio and video players or audio and video-streaming applications. These applications do not suffer from almost any glitch due to the background workload.
See a demo here: http://youtu.be/J-e7LnJblm8
Reading and others features of BFQ here: http://algo.ing.unimo.it/people/paolo/disk_sched/description.php
Change log for v1.02: https://github.com/elbermu/cerux_kernel-touchwiz/compare/a337aa0...HEAD
Holy sh*t. INSTALLING NAOH AJSVZIANAHSH16283638
Sent from my SGH-T989 using xda app-developers app
Thanks... So funny.. I just switched back from embryo to update my carbon nanandroid... gon back to embryo to try... Thanks again
OMG ....GRACIAS ELBERMU...
Sent fr
Thanks cerux for tw
Phone freeze when trying to pickup
Call then reboot by itself.
Im using badass gov, default freq, and sio.
I have to hard reset to get passed the boot screen.
The kernel back to the default setting (Ondemand gov)
Sent from my SGH-T989 using xda app-developers app
Love this kernel want to ask does it have fast charge and would love if it come with sweep to wake one day
winga45 said:
Love this kernel want to ask does it have fast charge and would love if it come with sweep to wake one day
Click to expand...
Click to collapse
Yes:
https://github.com/elbermu/cerux_kernel-touchwiz/commit/93c2ee845ce21a04de771867cfff52f1986f7f41
Use trickstermod to enable it...
Edit:S2W will come... and maybe screen sweep, not just the keypad
elbermu said:
Yes:
https://github.com/elbermu/cerux_kernel-touchwiz/commit/93c2ee845ce21a04de771867cfff52f1986f7f41
Use trickstermod to enable it...
Edit:S2W will come... and maybe screen sweep, just not the keypad
Click to expand...
Click to collapse
Thanks elbermu u rock
usb storage
when connected to computer it doesnt show up but when i flash a diffrent kernel it shows up need to fix usb storage
winga45 said:
when connected to computer it doesnt show up but when i flash a diffrent kernel it shows up need to fix usb storage
Click to expand...
Click to collapse
Probably you have fast charge enabled... It works excelent for me.
Check with:
cat /sys/kernel/fast_charge/force_fast_charge
elbermu said:
Probably you have fast charge enabled... It works excelent for me.
Check with:
cat /sys/kernel/fast_charge/force_fast_charge
Click to expand...
Click to collapse
Thanks elbermu but what should I do with that sys/kernel/fast_charge/force_fast_charge should I delete it or no
winga45 said:
Thanks elbermu but what should I do with that sys/kernel/fast_charge/force_fast_charge should I delete it or no
Click to expand...
Click to collapse
Don't delete it. Just change it to "no".
Sent from my Nexus 4 using Tapatalk 2
android88 said:
Don't delete it. Just change it to "no".
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks android88 but it says 0 should I change it or leave it
winga45 said:
Thanks android88 but it says 0 should I change it or leave it
Click to expand...
Click to collapse
0 means it is disabled. Are you testing in windows? I always use Linux, windows just in the office but I will try with it.
Sent from my Nexus 4 using Tapatalk 2
elbermu said:
0 means it is disabled. Are you testing in windows? I always use Linux, windows just in the office but I will try with it.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I use windows
winga45 said:
I use windows
Click to expand...
Click to collapse
Ok, I am out but I will check later when I get home...
Sent from my Nexus 4 using Tapatalk 2
elbermu said:
reserved
Click to expand...
Click to collapse
Did u got my pm message elbermu
Presenting OmniMetal rom for the Galaxy nexus where speed is king
This will be a semi nightly build and a work in progress
OmniMetal
Standard disclaimer-
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits and thanks to-
Mwisbest for all his source with linaro fixes
MBQ_ for help with github
Amperific for his awesome ASKP kernel
Linaro for thier optimizated toolchains and code
Sabermod also for their optimized toolchains and code
Omni Rom for the awesome base
Vanir Aosp for all their code fixes and enhancements
And of course thanks to everyone that downloads and uses my roms
Current Modifications by me
-O3 optimizations
Switch to linaro 4.8 toolchain
Added a little more gcc optimizations
Change animation scale in developer settings to .5 (helps with graphics some and gives an overall snappier feel)
Various tweaks and modifications for performance
Switch to ASKP kernel
To-do List
Suggestions?
Downloads
OmniMetal-toroplus
Suggested PA gapps
*Suggested BaNkS gapps (please use these if you plan to use ART runtime)*
Other BaNkS gapps packages
Suggested kernels-
Mpokang_kernel-v10_1080p
Mpokang_kernel-v10_CM-4.4
Mpokang_kernel-v10_SuperRAM-4.4
Installation
Use only the latest cwm (6.0.4.3) or latest TWRP (2.6.3.1)
Backup current rom in recovery
Wipe cache and data (I suggest wiping system as well but its optional)
Flash rom
Flash Gapps
Reboot
Enjoy someOMNI goodness
Known Issues
Data may not work (trying to fix now, logcats appreciated)
I am focusing on OmniMetal now but for those that prefer cMetal 11 there will be one cm 11 build per week and builds can be found here
Deprecated cMetal 11.0 Rom
Like my rom or work?
Donate to me
XDA:DevDB Information
OmniMetal, a ROM for the Samsung Galaxy Nexus
Contributors
metalspring
ROM OS Version: 4.4.x KitKat
Based On: Omni Rom
Version Information
Status: Alpha
Created 2013-11-30
Last Updated 2014-02-23
User Input and Issues or Bug Reports
User Input-
Although my coding knowledge is limited I am still open to try to add in any feature suggested here
However, please try to limit it to features found in other kitkat roms since it's most likely beyond my ability to forward port things lol
If you have any other feature requests please post them in the thread or at this link
Issues/ Bug reports-
If you have any issues with this rom, please provide details so I can troubleshoot them
details should include-
version of the rom you are using
kernel you are using (if not stock kernel)
any modifications you are using (ART, supersu, etc)
what the issue was and what were you doing when it happened
And also logcats/dmesg/last_kmesg logs are appreciated (even with known issues)
I will do my best to fix any issues that might arise to the best of my ability
Suggested Apps, Settings and Various Other Goodies
My personal settings for maximum performance
Mpokang v10 superram kernel (link in op)
TCP Congestion Control: Westwood
Read Ahead Buffer Size: 2048
I/O Scheduler: SioPlus
Frequencies-
192000 Min
1536000 Max
729600 Max Screen Off
384000 Min Screen on
Governor: Interactive
Dynamic Fsync: On (Please turn this off while adjusting settings to avoid issues if these settings dont work with your phone)
Temperature Limit: 80
GPU OC: 512 MHz
ZRam: Off
SmartReflex: Core, IVA MPU All On
Optimal Display Settings-
Content Adaptive Brightness- Off
Contrast: -14
Gamma Adjustment: 6
Gamma Offsets-
Red: - 6
Green: 0
Blue: 8
Color Multipliers-
Red: 200
Green: 200
Blue: 265
Other Settings for Performance-
Force GPU Rendering: On
ART Runtime
16 Bit Transparency: On
Allow Purging of Assets: On
Window Animation Scale: .5
Transition Animation Scale: .5
Animator Duration Scale: .5
NEPHILIMS CUSTOM KERNEL SETTINGS (For balance of performance and battery life)
Useful Apps/Addons
SuperSU
Xposed Framework (Not compatible with ART runtime)
For Music Lovers- VIPER4Android (Please follow instructions in thread op and use SuperSu)
Google Dialer with nearby places and search
Photosphere Addon
Anything you think should be here? Just tell me and it will be added
Thank you for the new rom!.. Going to give this a go in a bit
how do I download this ROM? I don't see a link.
Same.. Been waiting on the link but nothing as of yet. Is this just a placeholder??
Sent from my Galaxy Nexus using xda app-developers app
Sorry about that, had issues with uploading and then had to go to a Thanksgiving party with family lol
Uploading now, should be 25-30 minutes
Finally got it uploaded
A couple known issues-
Texts appear as being sent twice (dont worry they are really only sent once, you can blame koush for making a bad merge on this one lol)
I HIGHLY advise using the banks gapps listed in the op if you plan on using ART, PA gapps tend to cause waves of force closes when used with ART
This includes a cherry pick that is supposed to help with data issues on the toro, however I do not know if it will help toroplus or even break mobile data completely, if so then I'll get right on doing a build without it to see if that helps
This also has lots of cherry picks from other roms aimed at increasing performance and market restore should also work
I don't see the link still. maybe I'm missing something.
I See the link now. THanks!
apeh2000 said:
I don't see the link still. maybe I'm missing something.
Click to expand...
Click to collapse
Its in the op now under downloads for those on tapatalk
or under the downloads tab at the very top if you are on the desktop version of xda since its a DevDB type thread so I can keep track of downloads, have separate tabs for reviews, bug reports, and feature requests, etc
Great ROM. I've had it up and running for about an hour now. Still setting things up the way I like it, but so far very smooth and definitely a daily driver. Great work!
Doors going from 4.3 to 4.4 Chang the file system like going from 4.1 to 4.2 did?
Sent from my Galaxy Nexus using xda app-developers app
bigblue4life said:
Doors going from 4.3 to 4.4 Chang the file system like going from 4.1 to 4.2 did?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Nope
Sent from my XT1056 using Tapatalk
Nope, the only issues are the stock browser might lag slightly compared to everything else (due to outdated drivers on the gnex)
For the most part the browser lag is extremely slight, you might only notice when trying to fling through a webpage with tons of pictures and videos
Also the new optional ART runtime isnt compatible with a few different apps and is temperamental when it comes to gapps packages (please use the ones in op that say to use with ART if you plan on testing it out)
Other than that, everything should work fine
metalspring said:
Nope, the only issues are the stock browser might lag slightly compared to everything else (due to outdated drivers on the gnex)
For the most part the browser lag is extremely slight, you might only notice when trying to fling through a webpage with tons of pictures and videos
Also the new optional ART runtime isnt compatible with a few different apps and is temperamental when it comes to gapps packages (please use the ones in op that say to use with ART if you plan on testing it out)
Other than that, everything should work fine
Click to expand...
Click to collapse
Is it possible for you to use a different sight for your upload? Download is showing an hour.. From PC and from phone... just curious
deucedimetexas said:
Is it possible for you to use a different sight for your upload? Download is showing an hour.. From PC and from phone... just curious
Click to expand...
Click to collapse
Odd, it shows it would take less than 5 minutes for me, maybe there is an issue with your data connection?
metalspring said:
Odd, it shows it would take less than 5 minutes for me, maybe there is an issue with your data connection?
Click to expand...
Click to collapse
Checked that.. just downloaded 174 MB MBQ ROM in less than a minute. Is anyone else experiencing long download times?
Downloaded mine in 2 min on LTE.
Sent from my Galaxy Nexus using xda app-developers app
deucedimetexas said:
Is it possible for you to use a different sight for your upload? Download is showing an hour.. From PC and from phone... just curious
Click to expand...
Click to collapse
If you still need a mirror, here is one
http://www.mediafire.com/download/kbrn8lyju7ysou3/cMetal-11-20131130-Linaro-toroplus.zip
metalspring said:
If you still need a mirror, here is one
http://www.mediafire.com/download/kbrn8lyju7ysou3/cMetal-11-20131130-Linaro-toroplus.zip
Click to expand...
Click to collapse
thank you.. worked like a charm w/ mirror
This is not my work. Do not expect answers from me, everything I know will be in the OP. Use at your own risk, all credits go to mcaserg and anybody he has already credited!
[ALPHA] KK Version 18 found here, some bugs seem to be present. For a stable release, use the attached files at the bottom of the page for
I have been using this for a while and have not faced any problems (I am using the last January build of BAM and Trickster from the market to modify) - I am now sharing with you today, a custom kernel for our device. I have permission by the developer to share this now, it was not intended to be shared at first as the developer has changed handsets and has removed links and source from the Russian Forum it originated. This was last updated in December 2013, so it might not be perfect with current CM sources as I know there were a lot of changes in the kernel and ramdisk! - This kernel might not be perfect, might not work at all for you but it sounds like the best kernel we have access to right now.
I have permission to use the source by my good friend mcaserg and share it with you all. Anybody who knows what they are doing, please update this in line with the latest changes from CM, and feel free to keep using it for every further release but give appropriate credits to mcaserg and if you really want to, me for finding it
READ EVERYTHING BELOW AS THERE ARE A LOT OF FEATURES AND OPTIONS, SOME OF WHICH HAS BEEN TRANSLATED TO ENGLISH AND MIGHT LOOK A BIT ODD, SO BE CAREFUL!
UPDATE - 12/02/13 kernels patched to version 3.4.71. Added GPU Voltage Control. Added power scheme GPU Conservative. Fixed jamb stuttering sound when playing music with the screen turned off. Many small improvements and bug fixes, including by S2W/DT2W. Now decided to spread both the kernel version:
last Linaro 4.8.2 (from 31.10) C-O3 optimization, XZ compression
-kernel patched to the latest version of Linux 3.4.71
-Multiple patches and optimizations for Cortex A15
-Multiple patches and optimization to improve performance, system responsiveness / interface
-Sweep2Wake / Sweep2Sleep and DoubleTap2Wake (Knock_ON both LG G2)
-Adjust CPU frequency from 81 MHz to 2295 MHz
-added GPU overclocking up to 600 MHz by the new method (the default when running exhibited 450 MHz)
- 10% increases prizvoditelnosti compared with nuclei GPU acceleration with a classic at the same frequencies. tire-overclocked to 633 MHz -added CPU Voltage Control (voltage can be adjusted from 600 mV to 1400 mV) , added GPU Voltage Control (voltage can be adjusted from 900 mV to 1200 mV)
-Added management thermocontrol (now available complete setting 3 - x reset frequency step when overheated, setting temperature and frequency reset and shutdown in case of overheating)
-Added volume control via the kernel Faux Sound Control 3 (configured through either through TricksterMod Faux Sound)
-added Governor for simple GPU
-module Snake Charmer (CPUFREQ_Limiter) built into the kernel - for improved stability at high frequencies CPU
-CPU GOVERNORS :
smartmax
intellidemand
wheatley
savagedzen
Lazy
dancedance
smartassV2
smartassH3
lagfree
interactive
interactiveX2
badass
Lionheart
adaptive
abyssplugv2
asswax
conservative
OnDemand
ondemandplus
userspace
PowerSave
performance
-SCHEDULERS (planners):
noop
Deadline
row
CFQ
SiO
sioplus
fiops
BFQ
zen
VR
FIFO
-management algorithms TCP: bic, westwood, reno, cubic, highspeed , Hybla, htcp, Vegas, Veno, scalable, LP, yeah, Illinois
-fast charging (fastcharge)
-DynamicFSync
-support exFat, CIFS, patched to version 3.4.72. Stable version. Collected on the new Linaro 4.8.3 (from 12.13).
New sound FauxSound Updated to the latest version 3.1, updated firmware audio chip Audience_ES325 binaries with Galaxy Note3. S2W/DT2W
MUST BE ON ONLY ONE OF THESE OPTIONS, THE SECOND IS OFF!
-Option 1 - Intelliplug + MPDecision (modified) + input_boost -
-Option 2 - instead of Intelliplug + MPDecision, now used CPUQuiet (5 different control schemes) + Autohotplug
Please use something like Trickster or Kernel Tuner to make adjustments, a lot of the stuff is disabled by default.
[Option 1] [CM / AOSP] [08.12] [3.4.71] [v.17] [S2W/DT2W | CPU OC / UV | GPU OC / UV | FauxSound 3.1 | Intelliplug MPDecision + (modified) | Thermald (modified)] : Kernel for 4.3/4.3.1 gpro_v.17_4.3_intelliplug_mpdec_S2W_DT2W_NEW_FauxSound.zip (5.71 MB) Kernel 4.4 gpro_v.17_4.4_intelliplug_mpdec_S2W_DT2W_NEW_FauxSound.zip (5.78 MB)
[Option 2] [CM / AOSP] [08.12] [3.4.71] [V.17] [S2W/DT2W | CPU OC / UV | GPU OC / UV | FauxSound 3.1 | + CPUQuiet AutoHotplug | Thermald (modified)] : Kernel 4.3 / 4.3.1 gpro_v.17_4.3_cpuquiet_S2W_DT2W_NEW_FAUXSOUND.zip (5.72 MB) Kernel 4.4 gpro_v.17_4.4_cpuquiet_S2W_DT2W_NEW_FAUXSOUND.zip (5.8 MB)
For some screenshots and to look at the original post, CLICK HERE (please do NOT hassle the developer as he no longer monitors this, I was extremely lucky to even get what I managed to get)
Download links are attached below. This is the only version and final version I am providing, with permission. Please do not bother asking me for anything else
Moderator Edit: Links Removed
I forgot to add this one. Please see attached
Moderator Edit: Link removed
Wow lol. Awesome, man! Flashed this right when you uploaded it and all seems stable, so far. Stressed the CPU at 2.3GHz while playing with PPSSPP and no reboots! Deep sleep without any issues at 162MHz. Gonna see how 81 is later on tonight. So many features!
Sent from my LG-E980 using XDA Premium 4 mobile app
Neroga said:
Wow lol. Awesome, man! Flashed this right when you uploaded it and all seems stable, so far. Stressed the CPU at 2.3GHz while playing with PPSSPP and no reboots! Deep sleep without any issues at 162MHz. Gonna see how 81 is later on tonight. So many features!
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's definitely the best kernel I have used for our device. I have tested it pretty heavily and I don't have any issues. If I had time I would look in to updating it myself but somebody will able to use this and keep going!
Sent from my LG-E980 using Tapatalk 2
What exactly does cpuquiet do? I see that there are 2 versions and I flashed the one without.
Sent from my LG-E980 using XDA Premium 4 mobile app
Neroga said:
What exactly does cpuquiet do? I see that there are 2 versions and I flashed the one without.
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
To my understanding, (replaces hotplug control) and smooths out the way the cores work together and controls them more efficient. On paper it is supposed to be battery friendly without reducing performance by a great deal.
uppon2 said:
To my understanding, (replaces hotplug control) and smooths out the way the cores work together and controls them more efficient. On paper it is supposed to be battery friendly without reducing performance by a great deal.
Click to expand...
Click to collapse
Oh? I like the sound of that. I'll test them both heavily for a couple of days and report my findings.
--edit--
So far it seems that CPU quiet will definitely eat up more battery life than Intelliplug. It likes to kick on all 4 cores with at least 3 of them kicking at 1.7GHz with the slightest touch. This is with mpdecision on and off. Dropped 4% in the last half hour with full screen on and and just playing with the settings through trickstermod. Bad for tge 9300mAh ZL battery in which i could do the same with maybe 1% drop. Just a heads up! Switching back to the intelliplug one for awhile.
Sent from my LG-E980 using XDA Premium 4 mobile app
Oh sheeiiit... This looks interesting.
Sent from my Optimus G Pro using xda app-developers app
Neroga said:
Oh? I like the sound of that. I'll test them both heavily for a couple of days and report my findings.
--edit--
So far it seems that CPU quiet will definitely eat up more battery life than Intelliplug. It likes to kick on all 4 cores with at least 3 of them kicking at 1.7GHz with the slightest touch. This is with mpdecision on and off. Dropped 4% in the last half hour with full screen on and and just playing with the settings through trickstermod. Bad for tge 9300mAh ZL battery in which i could do the same with maybe 1% drop. Just a heads up! Switching back to the intelliplug one for awhile.
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Might be for performance only then. I swear it was for battery though. Oh well, I seem to prefer the other option myself as well. I kept accidentally double tapping my screen in my pocket and was wondering why my battery was draining, lol.
Can't wait to OC my E980
Flashing as I type...
I have only succumb to one bootloop... And that was pushing this baby to her max. I OC'd to the max and ran Antutu... Got about halfway and just stopped. I'm trying to get optimal speed and battery. Anyone have any good settings?
Sent from my Optimus G Pro using xda app-developers app
---------- Post added at 10:29 PM ---------- Previous post was at 10:29 PM ----------
Reboot* not bootloop my bad
Sent from my Optimus G Pro using xda app-developers app
does this kernel works on Korean version? F240L???
Nigglenuts said:
I have only succumb to one bootloop... And that was pushing this baby to her max. I OC'd to the max and ran Antutu... Got about halfway and just stopped. I'm trying to get optimal speed and battery. Anyone have any good settings?
Sent from my Optimus G Pro using xda app-developers app
---------- Post added at 10:29 PM ---------- Previous post was at 10:29 PM ----------
Reboot* not bootloop my bad
Sent from my Optimus G Pro using xda app-developers app
Click to expand...
Click to collapse
Use the terminal emulator in ROM toolbox and run: dmesg | grep PVS
This will reply with a number from 0-4. 0 being slowest binned and 4 being fastest. The lower the number, the higher the voltage you need for higher frequencies to run with stability. I learned this through my old LGOG. Not all processors are made the same so this WILL vary between different devices of the same model. If the value is between 0-2, you will need to up the voltages of frequencies higher than the stock 1.7GHz otherwise you WILL end up with boot loops and crashes. 3 and 4, probably not. With fast (3), the stock voltages for frequencies that are included with this kernel will most likely work without issue. I have a fast binned CPU and have no issues. I have a fast binned CPU and haven't had any problems. Faster (4) should actually be able to UV the frequencies above 1.7GHz without these issues. In stock ROMs with the stock kernel, this is already taken into account and will UV automatically according to your CPUs binning. This will also determine how well your device handles lower frequencies. Mine, being a 3, handles 162MHz just fine. But I end up getting SoD (Sleep of Death) meaning the screen won't turn on after turning it off for some time, at 81MHz. From my knowledge, 81MHz minimum will work on 4s which the developer of this kernel probably has. Why put in something you've had time to test and it just NOT work?
Sent from my LG-E980 using XDA Premium 4 mobile app
Neroga said:
Use the terminal emulator in ROM toolbox and run: dmesg | grep PVS
This will reply with a number from 0-4. 0 being slowest binned and 4 being fastest. The lower the number, the higher the voltage you need for higher frequencies to run with stability. I learned this through my old LGOG. Not all processors are made the same so this WILL vary between different devices of the same model. If the value is between 0-2, you will need to up the voltages of frequencies higher than the stock 1.7GHz otherwise you WILL end up with boot loops and crashes. 3 and 4, probably not. With fast (3), the stock voltages for frequencies that are included with this kernel will most likely work without issue. I have a fast binned CPU and have no issues. I have a fast binned CPU and haven't had any problems. Faster (4) should actually be able to UV the frequencies above 1.7GHz without these issues. In stock ROMs with the stock kernel, this is already taken into account and will UV automatically according to your CPUs binning. This will also determine how well your device handles lower frequencies. Mine, being a 3, handles 162MHz just fine. But I end up getting SoD (Sleep of Death) meaning the screen won't turn on after turning it off for some time, at 81MHz. From my knowledge, 81MHz minimum will work on 4s which the developer of this kernel probably has. Why put in something you've had time to test and it just NOT work?
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Code:
<6>[ 0.236267 / 01-01 00:00:00.230] acpuclk-8064 acpuclk-8064: ACPU PVS: 4
It restarts on Antutu if I overclock it a little with the default voltages...
BTW, anyone knows what app can edit the voltage for the GPU?
---------- Post added at 03:51 AM ---------- Previous post was at 03:22 AM ----------
Does it actually support exfat? I have a 64gb microsd which works just fine with the CM11 kernel but it is not recognized by any of the two variants posted here for KK.
Thanks
Daved+ said:
Code:
[ 0.236267 / 01-01 00:00:00.230] acpuclk-8064 acpuclk-8064: ACPU PVS: 4
It restarts on Antutu if I overclock it a little with the default voltages...
BTW, anyone knows what app can edit the voltage for the GPU?
---------- Post added at 03:51 AM ---------- Previous post was at 03:22 AM ----------
Does it actually support exfat? I have a 64gb microsd which works just fine with the CM11 kernel but it is not recognized by any of the two variants posted here for KK.
Thanks
Click to expand...
Click to collapse
Trickstermod is my app of choice for kernel customizations.
EXFat support has to be built directly into the ROM or can be installed by a mod. As far as I know, none exist for our device. There are a number of free programs for windows that allow you to format a 64gb sdcard to fat32 which will work on ANY ROM and ANY device running Android. I've had my 64gb class 10 SanDisk card formatted to Fat32 since my Atrix HD days and it still works on my OGP.
I posted a thread here in the general section about OC/voltages. Just waiting on someone to post the voltages on the stock kernel before I further my research into creating a list of voltages that will support up to 2.3GHz on our device.
Sent from my LG-E980 using XDA Premium 4 mobile app
mudi12 said:
does this kernel works on Korean version? F240L???
Click to expand...
Click to collapse
I don't think it will mate. However, if you read through the original forum it was posted on (found in OP at the bottom of the page) you might find someone made a modded version, as someone did get it going with MIUI and some others.
For all of you OC fans or anybody that wants the most out of the kernel, read through the original forum (found in OP at the bottom of the page) as well and you can see other people that have played with the settings and have given screenies for it. There is so many helpful tips and setups through those pages, plus it has other cool stuff so have a read
Man this is really exciting!
Thanks Uppon2 can't wait to give this a go.
This is no longer maintained by the dev right?
Which is the best kernel out of the 2 for kitkat? And how can I turn off the sweep2wake and tap2wake functions??
rjmxtech said:
Which is the best kernel out of the 2 for kitkat? And how can I turn off the sweep2wake and tap2wake functions??
Click to expand...
Click to collapse
Use Trickster's Mod from the playstore