Presenting OmniMetal rom for the Galaxy nexus where speed is king
This will be a semi nightly build and a work in progress
OmniMetal
Standard disclaimer-
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits and thanks to-
Mwisbest for all his source with linaro fixes
MBQ_ for help with github
Amperific for his awesome ASKP kernel
Linaro for thier optimizated toolchains and code
Sabermod also for their optimized toolchains and code
Omni Rom for the awesome base
Vanir Aosp for all their code fixes and enhancements
And of course thanks to everyone that downloads and uses my roms
Current Modifications by me
-O3 optimizations
Switch to linaro 4.8 toolchain
Added a little more gcc optimizations
Change animation scale in developer settings to .5 (helps with graphics some and gives an overall snappier feel)
Various tweaks and modifications for performance
Switch to ASKP kernel
To-do List
Suggestions?
Downloads
OmniMetal-toroplus
Suggested PA gapps
*Suggested BaNkS gapps (please use these if you plan to use ART runtime)*
Other BaNkS gapps packages
Suggested kernels-
Mpokang_kernel-v10_1080p
Mpokang_kernel-v10_CM-4.4
Mpokang_kernel-v10_SuperRAM-4.4
Installation
Use only the latest cwm (6.0.4.3) or latest TWRP (2.6.3.1)
Backup current rom in recovery
Wipe cache and data (I suggest wiping system as well but its optional)
Flash rom
Flash Gapps
Reboot
Enjoy someOMNI goodness
Known Issues
Data may not work (trying to fix now, logcats appreciated)
I am focusing on OmniMetal now but for those that prefer cMetal 11 there will be one cm 11 build per week and builds can be found here
Deprecated cMetal 11.0 Rom
Like my rom or work?
Donate to me
XDA:DevDB Information
OmniMetal, a ROM for the Samsung Galaxy Nexus
Contributors
metalspring
ROM OS Version: 4.4.x KitKat
Based On: Omni Rom
Version Information
Status: Alpha
Created 2013-11-30
Last Updated 2014-02-23
User Input and Issues or Bug Reports
User Input-
Although my coding knowledge is limited I am still open to try to add in any feature suggested here
However, please try to limit it to features found in other kitkat roms since it's most likely beyond my ability to forward port things lol
If you have any other feature requests please post them in the thread or at this link
Issues/ Bug reports-
If you have any issues with this rom, please provide details so I can troubleshoot them
details should include-
version of the rom you are using
kernel you are using (if not stock kernel)
any modifications you are using (ART, supersu, etc)
what the issue was and what were you doing when it happened
And also logcats/dmesg/last_kmesg logs are appreciated (even with known issues)
I will do my best to fix any issues that might arise to the best of my ability
Suggested Apps, Settings and Various Other Goodies
My personal settings for maximum performance
Mpokang v10 superram kernel (link in op)
TCP Congestion Control: Westwood
Read Ahead Buffer Size: 2048
I/O Scheduler: SioPlus
Frequencies-
192000 Min
1536000 Max
729600 Max Screen Off
384000 Min Screen on
Governor: Interactive
Dynamic Fsync: On (Please turn this off while adjusting settings to avoid issues if these settings dont work with your phone)
Temperature Limit: 80
GPU OC: 512 MHz
ZRam: Off
SmartReflex: Core, IVA MPU All On
Optimal Display Settings-
Content Adaptive Brightness- Off
Contrast: -14
Gamma Adjustment: 6
Gamma Offsets-
Red: - 6
Green: 0
Blue: 8
Color Multipliers-
Red: 200
Green: 200
Blue: 265
Other Settings for Performance-
Force GPU Rendering: On
ART Runtime
16 Bit Transparency: On
Allow Purging of Assets: On
Window Animation Scale: .5
Transition Animation Scale: .5
Animator Duration Scale: .5
NEPHILIMS CUSTOM KERNEL SETTINGS (For balance of performance and battery life)
Useful Apps/Addons
SuperSU
Xposed Framework (Not compatible with ART runtime)
For Music Lovers- VIPER4Android (Please follow instructions in thread op and use SuperSu)
Google Dialer with nearby places and search
Photosphere Addon
Anything you think should be here? Just tell me and it will be added
Thank you for the new rom!.. Going to give this a go in a bit
how do I download this ROM? I don't see a link.
Same.. Been waiting on the link but nothing as of yet. Is this just a placeholder??
Sent from my Galaxy Nexus using xda app-developers app
Sorry about that, had issues with uploading and then had to go to a Thanksgiving party with family lol
Uploading now, should be 25-30 minutes
Finally got it uploaded
A couple known issues-
Texts appear as being sent twice (dont worry they are really only sent once, you can blame koush for making a bad merge on this one lol)
I HIGHLY advise using the banks gapps listed in the op if you plan on using ART, PA gapps tend to cause waves of force closes when used with ART
This includes a cherry pick that is supposed to help with data issues on the toro, however I do not know if it will help toroplus or even break mobile data completely, if so then I'll get right on doing a build without it to see if that helps
This also has lots of cherry picks from other roms aimed at increasing performance and market restore should also work
I don't see the link still. maybe I'm missing something.
I See the link now. THanks!
apeh2000 said:
I don't see the link still. maybe I'm missing something.
Click to expand...
Click to collapse
Its in the op now under downloads for those on tapatalk
or under the downloads tab at the very top if you are on the desktop version of xda since its a DevDB type thread so I can keep track of downloads, have separate tabs for reviews, bug reports, and feature requests, etc
Great ROM. I've had it up and running for about an hour now. Still setting things up the way I like it, but so far very smooth and definitely a daily driver. Great work!
Doors going from 4.3 to 4.4 Chang the file system like going from 4.1 to 4.2 did?
Sent from my Galaxy Nexus using xda app-developers app
bigblue4life said:
Doors going from 4.3 to 4.4 Chang the file system like going from 4.1 to 4.2 did?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Nope
Sent from my XT1056 using Tapatalk
Nope, the only issues are the stock browser might lag slightly compared to everything else (due to outdated drivers on the gnex)
For the most part the browser lag is extremely slight, you might only notice when trying to fling through a webpage with tons of pictures and videos
Also the new optional ART runtime isnt compatible with a few different apps and is temperamental when it comes to gapps packages (please use the ones in op that say to use with ART if you plan on testing it out)
Other than that, everything should work fine
metalspring said:
Nope, the only issues are the stock browser might lag slightly compared to everything else (due to outdated drivers on the gnex)
For the most part the browser lag is extremely slight, you might only notice when trying to fling through a webpage with tons of pictures and videos
Also the new optional ART runtime isnt compatible with a few different apps and is temperamental when it comes to gapps packages (please use the ones in op that say to use with ART if you plan on testing it out)
Other than that, everything should work fine
Click to expand...
Click to collapse
Is it possible for you to use a different sight for your upload? Download is showing an hour.. From PC and from phone... just curious
deucedimetexas said:
Is it possible for you to use a different sight for your upload? Download is showing an hour.. From PC and from phone... just curious
Click to expand...
Click to collapse
Odd, it shows it would take less than 5 minutes for me, maybe there is an issue with your data connection?
metalspring said:
Odd, it shows it would take less than 5 minutes for me, maybe there is an issue with your data connection?
Click to expand...
Click to collapse
Checked that.. just downloaded 174 MB MBQ ROM in less than a minute. Is anyone else experiencing long download times?
Downloaded mine in 2 min on LTE.
Sent from my Galaxy Nexus using xda app-developers app
deucedimetexas said:
Is it possible for you to use a different sight for your upload? Download is showing an hour.. From PC and from phone... just curious
Click to expand...
Click to collapse
If you still need a mirror, here is one
http://www.mediafire.com/download/kbrn8lyju7ysou3/cMetal-11-20131130-Linaro-toroplus.zip
metalspring said:
If you still need a mirror, here is one
http://www.mediafire.com/download/kbrn8lyju7ysou3/cMetal-11-20131130-Linaro-toroplus.zip
Click to expand...
Click to collapse
thank you.. worked like a charm w/ mirror
Related
franco.Kernel features:
* I have 1 version for ICS(4.0.3/4.0.4) and one version for JB(4.1/4.1.1/4.1.2). If you ask if it works on older roms I will kick your ass
* Overclockable by tons of frequencies
* Custom Voltage Control from Ezekeel
* Sound Control from Ezekeel/Greg White
* OMAP Gamma interface
* Trinity's Contrast control
* Wifi_PM toggle
* Fsync toggle
* Thermal Throttle toggle
* Debug **** removed
* BFQ v5 IO scheduler by default
* Ramdisk tweaks
* Performance/battery carefully picked tweaks
* Lots more **** - flash and see for yourself
Changelog:
Milestone 6:
* Merged all patches related to 4.1.2
* Fixed the famous data drops by tricking Smartreflex to not overly calibrate certain hardware parts
* Added custom changes to lowmemorykiller driver to force the device to have a certain amount of free RAM to sustain smoothness over the time
* Made the launcher unkillable by the lowmemorykiller driver to prevent redraws or widget crapping itselfs
* Added a new governor called dyninteractive - this is similar to interactive in 99% but instead this new governor dynamically adapts its own tunables and settings depending on the system load.
* Increased Interactive governor kernel priority thread for the frequency change task - more smoothness
* Added a new tuneable for Interactive governor called input_boost_freq. Path is here: /sys/devices/system/cpu/cpufreq/interactive/input_boost_freq
* Added all TCP Congestion algorithms presents in the kernel. To check all algorithms run this command on the Terminal/ADB Shell: sysctl net.ipv4.tcp_available_congestion_control
To change the algorithm: sysctl -w net.ipv4.tcp_congestion_control=NAME_OF_THE_ALGORITHM
* BFQ IO scheduler updated from v4 to v5
* Added other smaller but still relevant changes available on my github repository
F.A.Q:
1. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg or logcat.
2. Battery sucks, my device is not entering deep sleep. FIX PLOX!
A: Fix it yourself, it's an app waking your device up not the kernel's problem
3. Signal is dropping since I flashed the kernel, amg u sucks!
A: The kernel has nothing to do with gsm/cmda signal. Make sure you have the latest radios
4. Do I need to wipe anything when flashing this kernel?
A: No.
5. Does this kernel has X or Y mod?
A: Learn to read, everything you need to know is in the features list, changelog or public repo.
6. GTA3, FIFA2012 or any game of the type isn't opening?
A: Flash this on CWM http://forum.xda-developers.com/showpost.php?p=27515966&postcount=20011
Downloads:
Jelly Bean kernel for 4.1/4.1.1 only:
Nightlies: http://minooch.com/franciscofranco/Galaxy Nexus/JB/Jelly Bean/
Milestone 6: http://minooch.com/franciscofranco/... Bean/milestones/franco.Kernel-Milestone6.zip
Ice Cream Sandwich only:
Milestone 4: http://minooch.com/franciscofranco/Galaxy Nexus/
Nightlies 384Mhz GPU: http://minooch.com/franciscofranco/Galaxy Nexus/nightlies/gpu_384mhz/
Nightlies 512Mhz GPU: http://minooch.com/franciscofranco/Galaxy Nexus/nightlies/
franco.Kernel updater app features:
* Downloads the kernel directly from the ftp
* Checks for updates directly from the ftp
* Checks and downloads Imoseyon's kernel (new feature)
* Kernel auto-flash
* Cpu frequencies changer
* Governor changer
* Voltage control interface
* Kernel settings:
* Hotplug enabler
* Color Control - You're able to change GAMMA values and Color Multipliers to achieve the best color profile
* Sound Control - Increase the max volume of your device
* Download special franco.Kernel boot animation
* Wi-fi special mode to boost signal during streaming while on screen off
* Custom download path
* Live calibrated voltages panel
* Disable logger
* SQlite defrag on boot
* Dedicated milestone and nightly kernels changelogs
My apps list: https://play.google.com/store/apps/...nVsbCxudWxsLDEwMiwic2ltcGxlLnJlYm9vdC5jb20iXQ
Source: https://bitbucket.org/franciscofranco/android-tuna-omap/
Jelly Bean kernel source: https://github.com/franciscofranco/Tuna_JB_pre1/tree/4.1
Have fun.
I'll give it a whirl and report back with my findings. I have been reading some reviews on your kernels for the other phones and they have been all positive, looking forward to some great battery life.
Sent from my Galaxy Nexus using XDA App
what is the recommended governor for best battery? Should a screen off profile be necessary
Sent from my Galaxy Nexus using XDA App
bradm23 said:
what is the recommended governor for best battery? Should a screen off profile be necessary
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Use the default. No, don't use profiles, they do more harm than good.
I got 2% drain for 10 hours last night! Pretty darn good if you ask me. I'm also running juice defender ultimate on aggressive setting to help out more. So far so good with this kernel thanks!
Sent from my Galaxy Nexus using xda premium
This looks promising. You ought to post this on rootzwiki as well.
Guys .. please stop promoting other forums here ... please.
Who is interested in posting/reading in other places will do so. So, again, please stop promoting rootzwiki here.
Can I flash using CWM? I didn't see that anywhere. Must I wipe data or cache as well? I would love to test it out. Im looking for any battery life improvement I can get.
And did I read this only works with a 4.0.3 ROM?
Sent from my Galaxy Nexus using Tapatalk
derrickonline said:
Can I flash using CWM? I didn't see that anywhere. Must I wipe data or cache as well? I would love to test it out. Im looking for any battery life improvement I can get.
And did I read this only works with a 4.0.3 ROM?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Flash in recovery, yes, 4.0.3 only
I opened and closed the camera app and used CPU spy and the majority of the time it spent was deep sleep. Then I rebooted this morning and didn't open and close the camera app. And I got the same results, doesn't look like that bug is present on my phone at least. So far I am getting good battery life using this kernel and juice defender.
sent from my new love, the Sexy Nexus.
franciscofranco said:
Use the default. No, don't use profiles, they do more harm than good.
Click to expand...
Click to collapse
I'd like to see some evidence to back up this claim. Granted that now the newer governors give you a decent enough screen-off profile built in that THAT profile may not be so much worthwhile, but for things like overheating profiles are damn sure worth the "good".
I'm a little curious to why there isn't a kernel dev who has implemented smartassv2 yet. I used this with my Inc and battery life was very solid
My phone ran on nightly 7 for 3 days without needing charge. Go support this guy in the market if you agree that is incredible. That is the longest battery life I have ever had with any of my droid phones, and this is the most resource hungry of them yet.
Thanks Franco
bradm23 said:
I'm a little curious to why there isn't a kernel dev who has implemented smartassv2 yet. I used this with my Inc and battery life was very solid
Click to expand...
Click to collapse
There is one out there. Don't wanna promote another kernel in this thread though
So I am a total idiot... I rerooted and went back to stock. Flashed this but forgot that when I went back to stock I was in 4.0.2...
now my phone is stuck on boot screen... how do I get back to the old kernel. When I press volume down power up I get to ODIN Mode?
bradm23 said:
I'm a little curious to why there isn't a kernel dev who has implemented smartassv2 yet. I used this with my Inc and battery life was very solid
Click to expand...
Click to collapse
Matr1x has it lol always switching between these two
drtchocky said:
So I am a total idiot... I rerooted and went back to stock. Flashed this but forgot that when I went back to stock I was in 4.0.2...
now my phone is stuck on boot screen... how do I get back to the old kernel. When I press volume down power up I get to ODIN Mode?
Click to expand...
Click to collapse
Press volume up, volume down, and power and hold them until you get the little wee android with an open tummy. That's fastboot mode. Here's a nifty little post about using fastboot mode to repush the stock everything on:
http://forum.xda-developers.com/showthread.php?t=1399210
---------- Post added at 12:21 AM ---------- Previous post was at 12:20 AM ----------
ghost_o said:
My phone ran on nightly 7 for 3 days without needing charge. Go support this guy in the market if you agree that is incredible. That is the longest battery life I have ever had with any of my droid phones, and this is the most resource hungry of them yet.
Thanks Franco
Click to expand...
Click to collapse
I've been asking on the GSM thread (originally where this was) to no avail, but now I'm simply shocked to see an LTE phone do that? WTF did you do to get such incredible battery life out of this phone? Were your radios on?
Just installed Axiom's ROM on Rootzwiki but when I went to the market it said your kernel is not compatible and wouldn't allow me a download.
Running well on GummyNex 0.3.8. Thanks
Picked up from the market.....very nice!!!! Thank you for ur work!
Sent from my Galaxy Nexus using Xparent Blue Tapatalk
Tweaked CM10.1+PA3.0+AOPKmr1=ParanoidKangDroid V2.03 JB 4.2.2 ROM(03.01.13)
This really isn't ParanoidAndroid, AOKP, or CyanogenMod anymore. When you put them all together you have something totally new. With this ROM you can do interesting things like having new rows of toggles and many other things that you'll have to find on your own. However keep in mind that on some occasions different settings can cause conflicts with others considering they're not supposed to be together in the first place, so just be smart about what you do.
the customization is endless to create the L00K you like!
3/01
Serious tweaking for battery stability and performance
signal and data tweaks
build.prop Modifications
custom kernel is included, it contains the following:
Linux 3.0.66
Compiled with GCC 4.7
O3 optimization flags
Overclocking to 1.836 Ghz
Underclocking to 96 Mhz
Voltage Control
Fast Charge
Plenty of performance tweaks for optimal speed and battery life
added PIMP MY ROM app for some more tweaking that will make you phone MORE STABLE!
info below about app
Pimp my Rom is an app for rooted users that will allow you to choose between a plethora of tweaks, mods, hacks, apps and features to your current ROM.
This app has been proven to improve the performance of your device on many points.
Pimp my Rom can be used on ANY Android Device, running ANY Rom
Some of the features include :
>> Build.prop Tweaks <<
- Better jpg image quality
- Better camera recording quality
- Lock launcher in memory
- Battery savings
- Disable kernel error checking
- Dalvik VM tweaks
- Faster scrolling
- Better touch responsiveness
- Faster browsing and download speed
- Allow purgeable assets
- Reduce dialing time
- Misc 3G tweaks
- Deeper sleep
- Reduce black-screen time of the proximity sensor after a call
- Smoother video streaming
- Faster wifi connect/disconnect
- Overall smoothness improvements
- Increase the size of VM heap
>> Enable/Disable Android Features <<
- Enable hardware video acceleration
- Disable Android logger
- Enable Android logger
- Enable gpu UI rendering
- Enable HSUPA
- Enable JIT (Just In Time) Compiler for Dalvik vm
- Disable Normalized Sleeper
- Disable Gentle Fair Sleepers
- Disable New Fair Sleepers
- Enable surface dithering
- Disable Boot-Animation (doesn't work on ics and +)
- Disable usage-data sending
- Disable volume buttons wake
- Disable adb notification icon
- Buttons backlight always enabled when screen on
- 16bit Transparency
>> Multitasking <<
- Choose between 4 levels of OOM (Out Of Memory) Groupings : Low/Mid/High/Very High
- Choose between 4 levels of Minfree Low Memory Killer settings : Low/Mid/High/Very High
- Choose between 2 levels of ZRAM Compression : 64mb/128mb
- Tweak your kernel to be adapted and stable on high multitasking conditions
- Tweak your Dalvik Virtual Machine to be adapted and stable on high multitasking conditions
>> Add Features & Mods <<
- Add support for OpenVPN connections
- Install Beats Audio binaries & dsp manager for a greater sound experience
- Install Adrenaline Boost Script
- Install Sony Walkman suite : Music Player & Visualizer, Clearbass soundfx and Image Gallery & Editor
- Install Bravia Engine
- Install xLoud
- Install Touchwiz Launcher
>> GPS Configuration <<
- Choose between 79 countries + 5 continents of gps.conf files
(Having the right gps.conf file for your country is esssential for the accuracy and lock-speed of your GPS)
>> Internet Security & Stability <<
Security :
- Protect yourself against SYN attacks and the DoS (Denial of Service) they cause by reinforcing your tcp/ip stacks
- Block redirects
- Block source-routing : source-routing allows one to fully trace the packets he sends, thus it can be used by blackhats to hack into your device
Stability and Speed :
-Increase queue and buffer size of all tcp sockets to make it more stable in high broadband consumption conditions
- Avoid TIME-WAIT state by re-using the Sockets in time-wait state. Reduces network memory-loading
- Various IPv4 speed improvements
- DNS tweaks for faster name resolution, thus faster connection to websites
- ppp0 interface speed tweaks
2/22
Changed "System"to"Interface"Removed duplicate Notification Drawer settingsNow compiled with GCC 4.7 toolchainAdded 96 Mhz clock speedAdded voltage controlAdded fast charge
To enable fast charge or to undervolt, just go into Performance Control
2/21
Updated to Android 4.2.2
Updated to CM 10.1
Updated to ParanoidAndroid 3.00
Updated to AOKP mr1.1 build 1
Added Update Center under Settings
Updated bootanimation
I added my own custom kernel that contains the following:
Overclocking to 1.836 Ghz
Underclocking to 192 Mhz
Plenty of performance tweaks
Linux 3.0.65
11 /27 Changelog
Merged CM10 Stable
Merged AOKP Milestone 1
Merged ParanoidAndroid 2.55
Kernel is default clocked at 1.512 Ghz (overclockable to 1.836 Ghz)
Added Animation Manager
Reorganized some stuff in Settings
Updated 4.2 Keyboard
Updated MMS app
Added more AOKP toggles
Fix volume rocker when screen off
New AOKP circle mod battery
Add alpha settings to circles lockscreen
Added Circles unlock screen (Under CM+ Settings)
Updated SuperSU
Updated CM File Manager
Fixed bootloop when changing UI
Added Sound tab under Advanced Device Settings
please check out screenies http://forum.xda-developers.com/showthread.php?t=1944523
Donations to Romcrazguy
Big thanks to thebz1
Instructions:
CWM: Install Rom: Download Mirrorhttps://www.dropbox.com/s/fa7n22vl1g7fuqd/PK-2.03-TWEAKEDd2tmo.zip Thanks to Lokichim!!
MD5: 68e6c3561a6d2b4c78ad4ced36c84a91
PLEASE DO FULL WIPE & Make sure the file you download is
CWM: Install Zip: please flash 12/12 this was confirmed to work[/B]:http://goo.im/gapps/
CWM: Wipe Data/Factory Reset
CWM: Advanced/Wipe Dalvik Cache
Reboot and edit your Apps Dpi & Layout under Settings/Paranoid Settings
If you want to explore the various phone modes, tap "Configuration," chose an option, wait for it to finish, then do a manual reboot
ParanoidAndroid's webpage: http://www.paranoid-rom.com/
AOKP's webpage: aokp.co/
Themes and other goodies you can find here: http://forum.xda-developers.com/show....php?t=1646034
Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen
If you have an issue and you want to call my attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread, Cyanogenmod's, ParanoidAndroid's, and AOKP's as well for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Pebble Blue Samsung Galaxy S III running THE BEST JellyBean ParanoidKANGdroid!
Reserved
Reserved ..sorry
first...
This is what I have been waiting for!
I love both AOKP and PA. I can't wait to give this ROM a spin
Are there any videos showing off all the features and settings?
Sent from my SGH-T999 using xda app-developers app
No not the yet because its still a pretty new ROM if you have questions feel free to ask anytime I will try to help you as much as I could
My ParanoidKang Android Tmo S3
Rock and Roll... I'll give it a run this afternoon and she rolls! Thanks man!
Ive tried flashing the AT&T version numerous times with no luck. I asked for it over on the other thread and my wish has been granted. Thank you kind sirs. :thumbup:
Sent from my SGH-T999 using xda premium
Im currently playing with I love the customization on this rom. Though ive had couple of random reboots.
Fresh installed it ffrom PA, do you think my backed up nandroid from original PA here the data can be advanced restored to this rom?
Sent from my SAMSUNG-SGH-t999 using xda app-developers app
---------- Post added at 08:03 AM ---------- Previous post was at 08:02 AM ----------
jhenderson81 said:
Ive tried flashing the AT&T version numerous times with no luck. I asked for it over on the other thread and my wish has been granted. Thank you kind sirs. :thumbup:
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Well it was for ATT. LOL
Sent from my SAMSUNG-SGH-t999 using xda app-developers app
No I tried doing that as well however restoring data from your backup will end you up in a bootloop . In terms of reboots I have experienced none try downloading lean kernel the latest and you should be good to go!!
My ParanoidKang Android Tmo S3
I installed it myself to give it a go, but IMO, it seems to be capable of a lot, but the UI just doesn't feel as good as the PA one. I've only played around with it in Tablet UI, but a few things I've noticed is that the navigation bar buttons are too far apart and that the app switcher UI isn't as refined. It is nice having all the toggles work, though. I'll be switching back to PA once the next release comes out.
The recent task manager actually is more advanced than you think (layout is a lil off but if you play with it im sure it could be fixed) what i like about it though is that it actually identifies know much ram your using (see screenshot)Anyhow When you setup tablet mode did you set it up via pa settings or ROM control because it does make a difference
My ParanoidKang Android Tmo S3
Guys here are a few screenshots of My ParanoidKang Android Tmo S3
I'm getting a lot of fc's...example:Google search...gallery...settings...And the stock browser isn't even working...it won't open...
Sent from my SGH-T999 using xda premium
did you wipe fully? make sure you clear cache and dalvik as well as fixing permission. if that doesn't work try reflashing again could be a bad flash .
phordych05 said:
I'm getting a lot of fc's...example:Google search...gallery...settings...And the stock browser isn't even working...it won't open...
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Romcrazguy said:
The recent task manager actually is more advanced than you think (layout is a lil off but if you play with it im sure it could be fixed) what i like about it though is that it actually identifies know much ram your using (see screenshot)Anyhow When you setup tablet mode did you set it up via pa settings or ROM control because it does make a difference
My ParanoidKang Android Tmo S3
Click to expand...
Click to collapse
I set it up through PAPrefs. I don't really care much for the total free RAM since I'm pretty sure we never run out of RAM lol.
FRIGGEN AWESOME! Downloading now.
Guys, for some reason my home button doesn't work anymore... any ideas why? It stopped working right after I flashed this rom, I was on PA before. I can get into recovery tho while the phone is off, so I know its not psychically broken. Any help is appreciated
Note2Core Kernel for Galaxy Note II N7100 / N7105 (LTE)
I am posting this here because it works on our LTE notes, since they all use a Qualcomm modem. I am running I on my AT&T note with no issues. All credit goes to g.lewarne - I am just posting here to so he doesn't have to maintain 2 threads. See his original post here
For the moment, exFAT formatted SD cards are NOT supported.
About this kernel
This kernel is built from pure Samsung GT-N7100 source, with modifications and tweaks to provide the best user experience in reliability, performance and stability. Built upon my experience firstly with NoteCore and then HydraCore for the original Note, as many of you know, I strive for the best
There are 4 versions of each kernel, for the International LTE model GT-N7105.
This kernel has all debuging removed - logcat, android log, kernel log, schedular log, etc etc all disabled. This is for performance reasons, so if you are a developer this kernel is probably not for you
Kernel Versions
There are three variants of the kernel for each device
STANDARD (STD) - 1.6ghz FSync() enabled
OVERCLOCK (OC) - 1.8ghz FSync() enabled
EXTREME (EX) - 1.8ghz FSync() disabled
ASYLUM (AS) - 1.920ghz FSync() disabled
The standard version, has no modifications to the processor clocks or voltages and can be considered a direct replacement for the stock kernel, and with FSync() enabled is completely stable
The OC kernel automatically scales up to 1.8ghz, with the proven voltages and stability from the perseus kernel (the same frequency table is used), and with FSync() enabled is completely stable
The EX kernel also scales to 1.8ghz, and has FSync() disabled. It offers by far the best possible performance. In rare circumstances you must be aware that this can lead to data corruption and the need to wipe / reflash a rom back to the phone. 99% of people will have no issues with this, as it has been extensively tested and proven on my previous kernel, but the risk is there. Dont go moaning to me if you lose your data and haven't got a nandroid backup!
The AS kernel is meant for the crazy ones. People who come from an asylum, those from the Note 1 know I am crazy, so this was meant for them. If there is a demand for the 7100 I will build that as well. I am not responsible if you are able to cook bacon on your device after running. It features up to a 1.920ghz over clock, and 640ghz on the GPU, it will go up, however for the moment we will run with 640. The phantom bug is that voltages cannot be set with SetCPU. Neither myself nor gavin know why. The code is spot on. So we don't get it. Lol. The source code is on github.com/glewarne
Kernel Features
- Built from official GT-N7100 sources
- 1.6 / 1.8ghz auto scaling
- Optimised VM memory settings, and global readahead
- Auto-rooting of any rom when flashed, even stock
- init.d script support
- CPU Voltage support through 3rd party apps
- Modified GPU DVFS utilisation steps for maximum GPU performance, far better than stock (this is NOT overclocking!)
- No logging / debugging of any kind for higher performance
- Decreased CPU frequency transition latency
- CRC32 slicing-by-8 algorithm
- SLUB allocator
- PEGASUSQ governor (default, others available)
- NOOP schedular, (default, others available)
- +50mb more free ram compared to all other kernels
- lots of other minor tweaks and changes
- ODIN TAR and CWM ZIPS available for all versions
- TouchWiz roms only
Download - Current Version v1.00
For N7105 (LTE) phones - Links pulled
The latest AsylumCore versions can be found - link pulled
Changelog
Asylum 2.11
-fixed 640 gpu clock(it works now!)
-switched to google 4.7 toolchain
-Note2Core STD, OC remain unchanged. AsylumCore EX and AS versions updated with 640 GPU clocks.
2.10
- Rebuilt from new N7100T source, released Dec 3rd
- All rotation issues in 4.1.2 fixed
- GPU steps reworked for better speed and responsiveness
- Built with linaro 12.11 GCC toolchain, with -O3 optimisation level
- lots of other internal changes
AsylumCore V2.01 - source on github now - github.com/antiochasylum/note2core_asylumcore_note2kernel
- version with *733* in file name is the 733 GPU @ 1150mV
- based off new source code 7100T
- compiled using latest linaro tool chain
- tweaked gpu scaling
- ro.secure=0 - I was tired of typing mount -o remount,rw -t /dev/block/mmcblk0p13 /system everytime to push a modified APK
- voltage bug still present
AsylumCore 1.339
- 1.920 CPU over clock
- 640 GPU clock
- other optimizations
v1.05
- Fixed Voltages
- Other minor changes
- Source is now on github - github.com/glewarne
v1.02
- Fixed video recording
- Added custom boot animation support, to use place desired boot animation in /system/media under *bootanimation.zip*
v1.01
- Fixed video playback for some users.
v1.00
- Initial release
Source Code
Click here
Credits and Thanks
sswagonman for being the bravest of souls, and a good friend
g.lewarne for his encouragement, help and support and friendship
phjz for coding help
Some parts of my code changes can be attributed to the following - Entropy512, franciscofranco, hardcore, gokhanmoral, AnderiLux
If I have forgotten anyone, let me know and ill add you to the list!
Please make sure to only download the 7105 variant of the kernel!!
Nice another kernel! Will test this baby out!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
In testing right. I went straight to extreme and so far lovin it!
sent using gNote II.
Hmm I flashed the OC version on my note 2 seems to be running great but the phone does not see my external sd card :/ just says external card removed safe to remove now even when trying to remount it, my card is formated to exFat not sure if that is the problem
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Love seeing the development...can't wait till my 14 day grace period is up...I got to be good for at least that long:angel::angel::angel:
Mac
turilo said:
Hmm I flashed the OC version on my note 2 seems to be running great but the phone does not see my external sd card :/ just says external card removed safe to remove now even when trying to remount it, my card is formated to exFat not sure if that is the problem
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Yes, exFAT is not supported, we just found out. A fix is coming soon. Also videos in games such as zombie wood don't play. Fixes coming soon.
Nice to see another kernel here.
Can you please update the OP with a link to the original n7100/n7105 kernel thread? (It might make it easier for users to pop over there and see current discussion, etc.)
Also, I'm kind of curious what kind of difference people have noticed by blocking the majority of kernel logging. In theory, it shouldn't make make a significant difference, but I never got around to testing it, so I'm not sure how well the theory applies. (kernel logs aren't backed by persistent storage, so there's no real I/O overhead to it.)
Take care
Gary
turilo said:
Hmm I flashed the OC version on my note 2 seems to be running great but the phone does not see my external sd card :/ just says external card removed safe to remove now even when trying to remount it, my card is formated to exFat not sure if that is the problem
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
So I checked the extfat on extreme and I have access to all files. Also checked the storage under settings and everything looks to be mounted.
sent using gNote II.
garyd9 said:
Nice to see another kernel here.
Can you please update the OP with a link to the original n7100/n7105 kernel thread? (It might make it easier for users to pop over there and see current discussion, etc.)
Also, I'm kind of curious what kind of difference people have noticed by blocking the majority of kernel logging. In theory, it shouldn't make make a significant difference, but I never got around to testing it, so I'm not sure how well the theory applies. (kernel logs aren't backed by persistent storage, so there's no real I/O overhead to it.)
Take care
Gary
Click to expand...
Click to collapse
Its there. Very top where I said I was posting here to help him maintain
Mac11700 said:
Love seeing the development...can't wait till my 14 day grace period is up...I got to be good for at least that long:angel::angel::angel:
Mac
Click to expand...
Click to collapse
+1
Was trying to do the same thing but, already stated custRomizing. Tethering working perfectly. So now on the the kernel for some speed!
Sent from my SAMSUNG-SGH-I317 using xda premium
antiochasylum said:
Please make sure to only download the 7105 variant of the kernel!!
Click to expand...
Click to collapse
Just curious what governor and schedulerare you using....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
blkghost22 said:
Just curious what governor and schedulerare you using....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Using the extreme version, pegasusq and noop.
If you guys try and play a movie in game, of won't work. There is a fox already and I'm running it on my phone. However he is trying to figure out ex fat before another version.
I just flashed this , cleared all my cache prior and after to installing it but for some reason I can't watch a video. ( I know you stated you can't in a game, but I can't in just my gallery)
I installed the OC one.. I will reflash to std one and report back
EDIT: flashed the STD one cleared all caches again and nothing.
Using the ex kernal without oc on dagr8 rom. Getting quadrant of 6700 if it matters to anyone.
Sent from the TermiNOTEr 2!
redrider54 said:
I just flashed this , cleared all my cache prior and after to installing it but for some reason I can't watch a video. ( I know you stated you can't in a game, but I can't in just my gallery)
I installed the OC one.. I will reflash to std one and report back
Click to expand...
Click to collapse
Watch a video in what? The gallery works, you tube works, the only thing that should not is video through a game. Which has been fixed, and uploaded. download the new version 1.01
antiochasylum said:
Watch a video in what? The gallery works, you tube works, the only thing that should not is video through a game. Which has been fixed, and uploaded. download the new version 1.01
Click to expand...
Click to collapse
Yeah I wasn't able to watch a video in my gallery, I just reflashed to the Perseus kernel after another cache wipe and it works again.
I tried both the OC and STD ones you had linked but both would not allow me to watch a video. ( Just gave me an error)
I will download the new version and try thanks!
---------- Post added at 03:21 PM ---------- Previous post was at 03:12 PM ----------
I can CONFIRM V1.01 Has fixed my gallery video playback issues thanks!!!!!!!
Is the 1.01 ok with extFat? Thank you for another great kernel and your work.
borijess said:
Using the ex kernal without oc on dagr8 rom. Getting quadrant of 6700 if it matters to anyone.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
My antutu score was 1000 less than on the perseus Rom. I really don't notice any differences between the two kernels do far though
Sent from my SAMSUNG-SGH-I317 using xda premium
theraker007 said:
My antutu score was 1000 less than on the perseus Rom. I really don't notice any differences between the two kernels do far though
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Mine is 1000 more than persaus. Is any one having issuse with the screen turning off. Mine just stays on and is set to 1 minute. I am running the ex kernal on dagr8 rom.
Sent from the TermiNOTEr 2!
Hello XDA peoples, Today, 11/19/13, I update the OP with my _ICED_KERNEL_ vs. MeltDown
ther are two kernel both are samw except one is OCd to 2.2GHz and the other 1.89GHz
the 2.2ghz is labeled as meltdown. Enjoy them both test them both and report back benches bugs or other wise, peace ~Rushing
here are current changes to stock kernel
################
# CHANGE LOG: #
###############
Tested and Safe =]
1. Added =3 levels of OC @ 540MHz overclock to Faux's overclocking to 1890MHz =] YES!!!
the "YES!!!" indicates that I am proud to have contributed to the kernel as I knew I would.
was going to do this along time ago but I was discouraged by the depths of geekdom involved.. haha
2. Added the following SCHEDs in addition to stock
SIO
ZEN
fifo
vr
row
##############################################
Added the following GOVERNORS in addition to stock
badass
pegasusq
savagedzen
brazillianwax
intellidemand
interactiveX
lazy
lionheart
ondemandx
samsung
smartass
wheatley
lagfree
lazy
lulzactiveV2
smartassV2
scary
interactive
################################
3. Added fast charge so device charges faster while on USB like it does on AC = nice
The zip contains the modules needed in /system/lib/modules .
flash only over a UVMC6 build
make a nandroid
just flash and wipe caches in TWRP
full spare-time kernel building lover now,, expect more features to kernel every now and then
ICED_KERNEL.zip
thanks to XDA for all the useful guides I have found
thanks to Cl3Kener for keeping me interested in kernel
thanks to Jamison904
thanks to Faux
thanks to thewadegeek and his good tutorial on kernel building http://forum.xda-developers.com/showthread.php?t=1748297
thanks to eagleeyetom finally found his guide for git. http://forum.xda-developers.com/showthread.php?t=1877040
Check out my Git pages @ hallovveen31 and check the changes I made to the stock kernel at your leisure.
_to kernel devs or beginning kernel devs, click here_
I am still fixing my git hub right now looks like I switched repositories and made a few commits the wrong way like didnt show records quite right because of the mix. however I am going to fix that later I just realized this after looking to see if I made the kernel go to 1.89 ghz while booting up for a faster boot =] so no worries to you up and coming kernel devs I will show you how I did it on git the right way. to regular users this means nothing special to you. git is just a record of the files and text code in those files to share with others, which I def want to do since I couldn't find the coding for oc up to 1890mhz and would love to share that.
https://github.com/hallovveen31
DOWNLOAD NEW KERNEL WITH NEW RLE IMAGE ie no star but a "SHADOW" graffiti .rle
https://sourceforge.net/projects/beastmade/files/ICED_COLD_SHADOW_KERNEL.1.89.new.rle.zip/download
ICED_COLD with new bootup splash- image a.k.a. initlogo.rle
MELTDOWN
get your windows MD5 checker here
http://winmd5.com/
Linux users.. get gtk hash
Enjoy the meltdown..
Thanks to Kl3kener again for giving me some tips ]
WARNING: nothing ever is my fault, period. if this kernel harms your phone because you overclock your device @ 2268MHz for three months, its your fault, duh. Anyway, the device would sleep and cool down.. So you would have to try pretty hard to cause damages...
Mine
Sent from my SGH-M919 using XDA Premium 4 mobile app
DOWNLOAD latest kernel:
ICED_COLD_1890MHz
take it away rushing
Waiting for it!
Hey Rushing, just tried this on top of JMT8 (with super cache wipe/twrp 2.6.1) and WiFi seems to be broken! Toggle in settings will not stay in ON position. Flashed back to twrp 2.6.0 because of your instructions and tried again (no cache wipe),same result. Flashed back to Tiberious 2.1 (no cache wipe) and phone booted up with WiFi on and working again.
mad4some said:
Hey Rushing, just tried this on top of JMT8 (with super cache wipe/twrp 2.6.1) and WiFi seems to be broken! Toggle in settings will not stay in ON position. Flashed back to twrp 2.6.0 because of your instructions and tried again (no cache wipe),same result. Flashed back to Tiberious 2.1 (no cache wipe) and phone booted up with WiFi on and working again.
Click to expand...
Click to collapse
Okay, thanks for testing I likely will never have time to flash all the ROMs and test compatibility.
I will take another stab at it. this time around all the modules will be deleted and replaced
where as in the first version the modules were expected to flash over the old ones which i guess doesnt always werk as leftovers may be uncompatible.
new build 1.1 is up thanks for testing let me know of success or failure please..
the new build works for me on my own ROM.
Wi-fi working fine here but I'm also using Rushing's Shad0w ROM. (1.1 version of kernel)
Just out of curiosity, Rushing, which of your ROMs do you use as your daily on the hercules?
Just tried 1.1 and WiFi still won't turn on with JMT8, obviously compatibility issue between the 2 of some sort. Per @aahz, kernel appears compatible with your roms Rushing. To continue the test, I'm going to flash my Shadow 1.6 nandroid tomorrow and then try 1.0 and 1.1 both just to see (and confirm). Looking forward to your next Hercules rom brother, Later
Aahz Pervect said:
Wi-fi working fine here but I'm also using Rushing's Shad0w ROM. (1.1 version of kernel)
Just out of curiosity, Rushing, which of your ROMs do you use as your daily on the hercules?
Click to expand...
Click to collapse
thanks for the feedback
I flashed a ROM I made for myself the other day. it has some paid apps in it thats why its for me only and has trickster mod apk xposed installer xprivacy xthemeengineand app setting included... interested? I could remove the paid apps and let it go.. i just noticed that the [extra] toggles and battery are green and the settings_icons are regular yet greyed out rather than every color of TouchWix...
could upload it with the new kernel included. looks like I called it liquid shadow... also uploaded a ROM to SF here is before I even post it =] works good so far didnt test blue tooth hdmi out alot of thing but i suspect everything is good and improved https://sourceforge.net/projects/be...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
http://sourceforge.net/projects/bea...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
http://sourceforge.net/projects/bea...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
http://sourceforge.net/projects/bea...D_CRYSTAL_SKULLS_signed_11-12-13.zip/download
Aahz Pervect said:
Wi-fi working fine here but I'm also using Rushing's Shad0w ROM. (1.1 version of kernel)
Just out of curiosity, Rushing, which of your ROMs do you use as your daily on the hercules?
Click to expand...
Click to collapse
thanks for the feedback
I flashed a ROM I made for myself the other day. it has some paid apps in it thats why its for me only and has trickster mod apk xposed installer xprivacy xthemeengineand app setting included... interested? I could remove the paid apps and let it go.. i just noticed that the [extra] toggles and battery are green and the toggles... and the settings icons are regular tw, yet greyed out rather than every color of TouchWix... could upload it with the new kernel included. looks like I called it liquid shadow... also uploaded a ROM to SourceForge with the new kernel will post very soon... here it is https://sourceforge.net all seems good so far not tested bluetooth yet and hdmi out alot of functions are untested but I bet they all work close to perfect.
https://github.com/hallovveen31
Rushing said:
thanks for the feedback
interested?
Click to expand...
Click to collapse
Absolutely, that'd be great.:good:
Aahz Pervect said:
Absolutely, that'd be great.:good:
Click to expand...
Click to collapse
New kernel Over clockable to 1890 MHz plus more governors and schedulers fast charge
I bother you all with an updated OP and kernel
Changed the boot-up-image splashscreen, initlogo.rle, whatever you want call it. No more star rather a bit of graffiti "SHADOW" to match up with my new ROM version of SHADOW =] enjoy
Checking out the new Shadow Mastery ROM and Kernel version...awesome per usual Rushing. :good:
@Rushing bro please can u make this ROM for us I would be n heaven n I'd have ur babies but of course put that beast tweak on it
http://forum.xda-developers.com/showthread.php?t=1847600
Sent from my SAMSUNG-SGH-T989 using Tapatalk
Aahz Pervect said:
Checking out the new Shadow Mastery ROM and Kernel version...awesome per usual Rushing. :good:
Click to expand...
Click to collapse
yeah I see somebody got into the goodies already hehe ]
that was you huh, thanks you like it? no more pentagrams, all gone shadow has seen the light and trying to change for the better. yeah right ]
for everyone else that dont know where it is, here.
Rushing said:
yeah I see somebody got into the goodies already hehe ]
that was you huh, thanks you like it? no more pentagrams, all gone shadow has seen the light and trying to change for the better. yeah right].
Click to expand...
Click to collapse
I definitely dig it. I lean more towards Shadow over Crystal Skulls (theme-wise) so to have an updated version is great.:highfive: It's nice and fast with the new kernel and I like the subtle theme changes as well.
KERNEL UPDATE 2.2GHz
Updated the OP with this /
/
/
ICED_COLD vs. MeltDown 2.268 GHz
bump. this one can be on the first page for a while longer
what 2.2GHz kerenel ?!?
Presenting OmniMetal rom for the Verizon Galaxy nexus where speed is king
This will be a semi nightly build and a work in progress
OmniMetal
Standard disclaimer-
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits and thanks to-
@Mwisbest for all his source with various fixes and optimizations
@bsmitty83 for his great kernel source
MBQ_ for help with github
Linaro for thier optimizated toolchains and code
Omni Rom for the awesome base
Vanir Aosp for all their code fixes and enhancements
Anyone else that contributed to source
Google and Linux for open source goodness
And of course anyone that uses my roms
Current Modifications by me
fix for mobile network settings for toro
-O3 optimizations
Switch to linaro 4.8 toolchain
Added a little more gcc optimizations
Change animation scale in developer settings to .5 (helps with graphics some and gives an overall snappier feel)
Various tweaks and modifications for performance
Switch to Dirty_V
To-do List
Suggestions?
Downloads
OmniMetal-toro
PA gapps
Installation
Use only the latest cwm (6.0.4.3) or latest TWRP (2.6.3.1)
Backup current rom in recovery
Wipe cache and data (I suggest wiping system as well but its optional)
Flash rom
Flash Gapps
Reboot
Enjoy some OMNI goodness
Known Issues
None?
Like my rom or work?
Donate to me
XDA:DevDB Information
OmniMetal, ROM for the Samsung Galaxy Nexus
Contributors
metalspring
ROM OS Version: 4.4.x KitKat
Based On: Omni Rom
Version Information
Status: Beta
Created 2013-11-18
Last Updated 2014-06-01
User Input and Issues or Bug Reports
User Input-
Although my coding knowledge is limited I am still open to try to add in any feature suggested here
However, please try to limit it to features found in other kitkat roms since it's most likely beyond my ability to forward port things lol
If you have any other feature requests please post them in the thread or at this link
Issues/ Bug reports-
If you have any issues with this rom, please provide details so I can troubleshoot them
details should include-
version of the rom you are using
kernel you are using (if not stock kernel)
any modifications you are using (ART, supersu, etc)
what the issue was and what were you doing when it happened
And also logcats/dmesg/last_kmesg logs are appreciated (even with known issues)
I will do my best to fix any issues that might arise to the best of my ability
Suggested Apps, Settings and Various Other Goodies
My personal settings for maximum performance
DirtyV kernel (included in rom)
TCP Congestion Control: Cubic
Read Ahead Buffer Size: 1024
I/O Scheduler: FIOPS
Frequencies-
230000 Min
1500000 Max
700000 Max Screen Off
350000 Min Screen on
Governor: Ondemand
Dynamic Fsync: On (Please turn this off while adjusting settings to avoid issues if these settings dont work with your phone)
Temperature Limit: 80
GPU OC: 512 MHz
ZRam: Off
SmartReflex: Core, IVA MPU All On
Optimal Display Settings-
Content Adaptive Brightness- Off
Contrast: -14
Gamma Adjustment: 6
Gamma Offsets-
Red: - 6
Green: 0
Blue: 8
Color Multipliers-
Red: 200
Green: 200
Blue: 265
Other Settings for Performance-
Force GPU Rendering: On
ART Runtime
Window Animation Scale: .5
Transition Animation Scale: .5
Animator Duration Scale: .5
NEPHILIMS CUSTOM KERNEL SETTINGS (For balance of performance and battery life)
Useful Apps/Addons
Xposed Framework (Not compatible with ART runtime)
For Music Lovers- VIPER4Android (Please follow instructions in thread op and use SuperSu)
Google Dialer with nearby places and search
Photosphere Addon
Anything you think should be here? Just tell me and it will be added
Yeehaw!!!!
Thanks metal, dl imminent!
Ok dl'd gapps but dont see the rom link?
Damn...
I got ninja'd...
Got it now thanks again!
Sent from my Galaxy Nexus using Tapatalk 2
47th_Ronin said:
Yeehaw!!!!
Thanks metal, dl imminent!
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Link is up in op
(xda is taking forever to upload to the dev db link lol)
Ok, quick question, I've always used nexus louder mod because of low volume on my phone due to the headphone jack being a p.o.s. any one know of a way to fix volume on 4.4?
I've tried the usual, i.e. build prop edits and such but haven't been able to make anything work too well.
Sent from my Galaxy Nexus using Tapatalk 2
47th_Ronin said:
Ok, quick question, I've always used nexus louder mod because of low volume on my phone due to the headphone jack being a p.o.s. any one know of a way to fix volume on 4.4?
I've tried the usual, i.e. build prop edits and such but haven't been able to make anything work too well.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Well, you could use the viper4android app
Its more of a super feature rich dsp manager, but it also has the capability of increasing the volume of headphone audio, speaker audio and bluetooth audio
link to app thread- http://forum.xda-developers.com/showthread.php?t=2191223
Hey, just a suggestion, I would try cherry picking from Fitsnugly CM11, they have Quick Toggle Settings setup.
Thanks for this. 3G/4G handoff has been seamless. :good:
Ooooo! I love new ROMs to try! Thanks for this
t1.8matt said:
Hey, just a suggestion, I would try cherry picking from Fitsnugly CM11, they have Quick Toggle Settings setup.
Click to expand...
Click to collapse
looks like he just cherry picked them from the cm gerrit so I should be able to add that in (unless he also made local changes)
right now I'm trying to get a build with linaro 4.8 toolchain in to see if linaro or 4.8 gcc breaks anything right now
so far only had a couple of errors stopping the build but they were easily fixed (hopefully no more pointless Werror clfags hidden around lol)
Btw, any ideas on kernels?
metalspring said:
looks like he just cherry picked them from the cm gerrit so I should be able to add that in (unless he also made local changes)
right now I'm trying to get a build with linaro 4.8 toolchain in to see if linaro or 4.8 gcc breaks anything right now
so far only had a couple of errors stopping the build but they were easily fixed (hopefully no more pointless Werror clfags hidden around lol)
Btw, any ideas on kernels?
Click to expand...
Click to collapse
From what I've read, the CM kernel has stopped the random reboots. Would building with another kernel bring them back?
oh, one other thing that would be great, i don't know if it's doable, is a clear button for recents.
modernbummer said:
From what I've read, the CM kernel has stopped the random reboots. Would building with another kernel bring them back?
Click to expand...
Click to collapse
Not sure how fixing the reboots, but dhackers version of the cm kernel is supposed to at least help
I could switch to it and then see if I can add different patches to bring in more available kernel settings and overclock
t1.8matt said:
oh, one other thing that would be great, i don't know if it's doable, is a clear button for recents.
Click to expand...
Click to collapse
It may be possible, I'm sure either AOSPA, slim roms or vanir have that brought up to kitkat in their source
if not then i can at least try to port it from the 4.3.1 sources
metalspring said:
It may be possible, I'm sure either AOSPA, slim roms or vanir have that brought up to kitkat in their source
if not then i can at least try to port it from the 4.3.1 sources
Click to expand...
Click to collapse
I haven't seen it yet in any 4.4 rom, but it'd be sweet if you could do it.
So far it's the best CM11 ROM I've tried thus far! This will get me through until January when I'm going to the Nexus 5. Thanks for the hard work! Looking forward to this one getting better & better!
metalspring said:
Not sure how fixing the reboots, but dhackers version of the cm kernel is supposed to at least help
I could switch to it and then see if I can add different patches to bring in more available kernel settings and overclock
Click to expand...
Click to collapse
You should definitely switch to the dhacker kernel. I'm on his 11/18 build, I've been trying to get a screen freeze or reboot...... Its not happening.
Sent from my Galaxy Nexus using Xparent Skyblue Tapatalk 2
justen7723 said:
You should definitely switch to the dhacker kernel. I'm on his 11/18 build, I've been trying to get a screen freeze or reboot...... Its not happening.
Sent from my Galaxy Nexus using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
speaking of which, i found some an interesting post that might help even more
http://forum.xda-developers.com/showpost.php?p=47036814&postcount=170
This ROM is smooth. I'm having one issue though. I can't seem to log into my Google account in the calendar app. It just keeps saying it can't access the Google servers.
EDIT: calendar just started syncing.
Possible to add hold back to kill app???
Sent from my Galaxy Nexus using Xparent Skyblue Tapatalk 2