http://www.droid-life.com/2014/02/26/asus-releases-two-official-nexus-7-docks-priced-at-50-and-90/
Both are on Amazon. The wired goes for $50, and the wireless goes for $70 (contrary to what the article states). It shows $90, but that's from a third party seller. You have to choose Amazon as the seller under "More Buying Options" if you want it for $70. Ships in 2-4 weeks.
Seems to be US only for now, despite the fact that it's an international device. I'll just stick with my Nokia Qi charger.
AlderCass said:
Seems to be US only for now, despite the fact that it's an international device. I'll just stick with my Nokia Qi charger.
Click to expand...
Click to collapse
Agreed, while I like the idea of docks they are just always over priced and never work if you have a case. I have a nokia qi charger on my nightstand for my nexus 5, might as well just pick up another one for around $25 for my desk. So nice not having to plug in the charger anymore.
I have both the docks, they are available in the UK through the Asus Shop.
The wireless dock is a lot smaller than you might expect. It comes with a charger which has a very big suppression core at one end. It will charge the Nexus 7 with a case fitted or even with the case open (doubled up) to expose the screen. It only works with the Nexus 7 in landscape mode and does not have any magnets to hold the Nexus 7 in place. It is far less fussy than the Google official Qi charger which requires almost millimeter precise positioning and barely works with most cases.
The wired dock is made of a semi transparent grey plastic that attracts grease marks like a neodymium magnet. You need to remove the case from your Nexus 7 for it to connect, it is a very snug fit. The base has a micro HDMI connector and a micro USB for charging. Unlike an MHL adaptor it does not need power to work. This is really most suitable for semi permanent use, if you use a case to protect your Nexus 7 you would probably be better off buying a slim port display lead instead.
MobileBritain said:
I have both the docks, they are available in the UK through the Asus Shop.
The wireless dock is a lot smaller than you might expect. It comes with a charger which has a very big suppression core at one end. It will charge the Nexus 7 with a case fitted or even with the case open (doubled up) to expose the screen. It only works with the Nexus 7 in landscape mode and does not have any magnets to hold the Nexus 7 in place. It is far less fussy than the Google official Qi charger which requires almost millimeter precise positioning and barely works with most cases.
The wired dock is made of a semi transparent grey plastic that attracts grease marks like a neodymium magnet. You need to remove the case from your Nexus 7 for it to connect, it is a very snug fit. The base has a micro HDMI connector and a micro USB for charging. Unlike an MHL adaptor it does not need power to work. This is really most suitable for semi permanent use, if you use a case to protect your Nexus 7 you would probably be better off buying a slim port display lead instead.
Click to expand...
Click to collapse
Cool. I ordered the wireless one from Amazon (for $70) after I made this thread. Even though it said "2 to 4 weeks" to ship, I actually just got the notification that it shipped today. Should be getting it by Tuesday. I was looking for a second standing Qi Charger (for work) since I use my Nexus 4 Orb at home. I'll see how it works with my N7 2013 as well as my N5. Do you have any experience using the wireless one with a N5?
Sent from my Nexus 5 using xda app-developers app
I don't have a Nexus 5 around to try it but recently read a review that said it worked well with the N5.
Sent from my Nexus 7 using xda app-developers app
I just ordered the corded one and it said I'll get it between march 25th and April 1st. Looking forward to it.
charesa39 said:
Cool. I ordered the wireless one from Amazon (for $70) after I made this thread. Even though it said "2 to 4 weeks" to ship, I actually just got the notification that it shipped today. Should be getting it by Tuesday. I was looking for a second standing Qi Charger (for work) since I use my Nexus 4 Orb at home. I'll see how it works with my N7 2013 as well as my N5. Do you have any experience using the wireless one with a N5?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Welp... Just received the wireless charger. First off, let me say, it works wonderfully with the N7 2013, which one would hope considering this Qi charger was made specifically for it. It does look pretty slick and is A LOT smaller than I was anticipating. However, I'm sad to say that it's going back to Amazon. The main reason is that it doesn't work with my Nexus 5 like I was hoping it would. I have my N5 in a Diztronic TPU case, and the bottom lip of the case apparently raises it just high enough to be out of range of the charging coils. It will charge without a case, but I'm not about to commit to taking it out of the case every single time I want to use this charger for my N5. The only reason I could justify paying this price was if I would be able to use it on my N7 AND N5. I guess I'll just wait for the Tylt Vu to go back on sale again and pick that up instead. Pretty disappointed.
It is surprisingly smaller than you expect, whoever took the promo pictures should give Tom Cruise a call.
Shame it's not compatible with your N5 in it's case, that is a little surprising as this is the most unfussy Qi charger I have used to date.
Sent from my Nexus 7 using xda app-developers app
Asus UK website currently offering 50% off wireless or wired docks for all new Nexus 7 2013 bought in March. Off also includes a free travel case.
Sent from my C6903 using xda app-developers app
The cord is kinda short on this thing... Any suggestions on what longer cable may work?
Sent from my Nexus 5 using Tapatalk
Bummer :/
charesa39 said:
Welp... Just received the wireless charger. First off, let me say, it works wonderfully with the N7 2013, which one would hope considering this Qi charger was made specifically for it. It does look pretty slick and is A LOT smaller than I was anticipating. However, I'm sad to say that it's going back to Amazon. The main reason is that it doesn't work with my Nexus 5 like I was hoping it would. I have my N5 in a Diztronic TPU case, and the bottom lip of the case apparently raises it just high enough to be out of range of the charging coils. It will charge without a case, but I'm not about to commit to taking it out of the case every single time I want to use this charger for my N5. The only reason I could justify paying this price was if I would be able to use it on my N7 AND N5. I guess I'll just wait for the Tylt Vu to go back on sale again and pick that up instead. Pretty disappointed.
Click to expand...
Click to collapse
Yeah I just got mine last week and I think I might be sending it back as well. The bottom lip isn't big enough to secure the N7 2013 while its in my poetic case so it doesn't really work as the "plot-and-charge-grab-and-go" solution that I hoped it would.
Bummer :crying:
Related
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
i purchased the Original from Samsung only $40, and it comes with extra 1850 mAh original battery with NFC
AllGamer said:
i purchased the Original from Samsung only $40, and it comes with extra 1850 mAh original battery with NFC
Click to expand...
Click to collapse
Any pictures? How long did it take for you to receive it?
Sent from my SGH-T989 using xda premium
Ok, but that is $29 more than $11 and most people don't need a $29 battery and NFC is useless for the most part. Plus it doesn't work with a case. Other than that, GOOD DEAL!!
Sent from my SGH-T989 using xda premium
OuncE718 said:
Any pictures? How long did it take for you to receive it?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Picture is in the OP as was the approx delivery time.
Sent from my SGH-T989 using xda premium
MisterEdF said:
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
Click to expand...
Click to collapse
Nice going order me a couple of them. Thanks
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
x6369x said:
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
Click to expand...
Click to collapse
from the pictures it seems way too tight to fit in with a case
however the original one from Samsung will work just fine with cases, pictures here
http://forum.xda-developers.com/showthread.php?t=1349656
Thanks. Looks good.
MisterEdF said:
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
Click to expand...
Click to collapse
Can you post pics of your T-989 w/ TPU case in the dock?
Do you know if the USB transmits audio and if it has a back 3.55mm jack?
I ordered two of the Sinjimoru Sync stands. They're cool looking and lightweight. I removed the two lock tabs on the cable that make the cable stick in tighter. I'm planning on mounting them to something that won't lift up easily when I try to remove the phone. Overall, worth the $22.
Sinjimoru Sync & Charge Dock
Looks awesome but does it tip over easily? looks unstable
AllGamer said:
from the pictures it seems way too tight to fit in with a case
however the original one from Samsung will work just fine with cases, pictures here
http://forum.xda-developers.com/showthread.php?t=1349656
Click to expand...
Click to collapse
The stand you are linking to doesn't charge or sync. That stand is just a holder with no connection directly to the phone. 2 totally different things with totally different purposes.
x6369x said:
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
Click to expand...
Click to collapse
It fits my T989 with the Diztronics case no problem and will fit any similar "thinness" case. Snug, but no problem. I looked at the D30 case the other day and put them up against each other and while the left to right size are identical the front to back on the D30 is a bit more and my guess is it wouldn't fit. I was surprised when my Diztronic case fit but it did NOT need to be forced, just a slight push. For $11 you really can't go too wrong.
talltexan said:
Do you know if the USB transmits audio and if it has a back 3.55mm jack?
Click to expand...
Click to collapse
No audio capability, just charge and sync.
thanks I ordered one
They are still tight on the base, and would tip over if you pushed them. They're fairly stable, but it is kind of a pain to use one hand to hold the base grab the phone.
I did fix that today. I went out into the alley behind the loft and grabbed a brick. A few minutes after meeting the dremel and a little bit of epoxy, they're stable.
http://farm7.staticflickr.com/6233/6366960059_565143ef63_b.jpg
That's what the stands look like mounted to the brick, and in the Body Glove Diamond cases. I did play a little with some LEDs and lighting the bases up, since they're clear/black acrylic and the light travels through them. I'm going to hold off on that for now, but maybe soon.
to choking am a bit confuse on ur pic is that just a stand whit out the option of charging or a stand whit charger?
There is a cable that comes up behind the stand, and snaps into the stand. It charges, and I bet you could use the stand for other phones, but I can't guarantee that. I know it works fine with the T989.
Well thx for ur response ill see if i get my hands on one this on up coming week
Sent from my SGH-T989 using xda premium
I bought this dock http://www.ebay.com/itm/Desktop-Doc...293200?pt=PDA_Accessories&hash=item27c97f6250
I think it a generic dock designed to fit as many devices as possible. The shape of the dock doesn't match the phone. Without the case the phone is held just by the USB connector. With a case it is supported only from the back. The slot in the dock would work for a device at least 1/2" (12mm) thick. The bed of the slot is flat and GSIII bottom is curved, so the phone is wobbly. Basically, this dock is a ripped USB port waiting to happen. The rear connector for an USB cable is so deep in the case that cable falls off.
The dock is very cheap, now you know why.
Well its cheap for a reason.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I have bought a lot of amazingly cheap electronics and accessories from China. Some of them do work as well as those you can buy in stores for x10 price. But others are crap. I wanted to share my experience so people wouldn't waste their time and $4.
probably wouldn't have bought, now definitely won't. Thanks for the heads up!
jkish1752 said:
Well its cheap for a reason.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
+1, all you have to do is make a back support for the phone with some 1/16" aluminum sheet or something. I've done that to a number of iPhone docks in the past and it works perfectly.
I went to Seidio's site today to see what their progress on cases for the Nexus 5 look like and found that they have their holder page up with all of the usual cases there. Everything is showing as "Under Development" but the prices are up at least.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm
You can go to another phone's section and get an idea of what the cases look like. I am personally looking for a ruggedized case with a holster and a kickstand, so far it looks like the absence of Otterbox (just like the Nexus 4) means that Seidio might be the only option.
no battery case
hmm i wonder if that damn metal kickstand (which uses magnets) will interfere with wireless charging
indianajonze said:
hmm i wonder if that damn metal kickstand (which uses magnets) will interfere with wireless charging
Click to expand...
Click to collapse
Doubtful, the official charger that is due to hit the play store sometime utilizes magnets to hold the N5 in place with the metal discs in the N5. Magnets can impact the compass and such, but not wireless charging.
Sent from my Nexus 5 using Tapatalk
A battery case would be sick and I'll wouldn't mind paying a premium price for it
Sent from my Nexus 5 using XDA Premium 4 mobile app
duckied said:
A battery case would be sick and I'll wouldn't mind paying a premium price for it
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
A battery or an Obex case are the only things I would consider frrom Seidio.
Gah! Where's the Convert?
well after doing a bit of research it seems that the N5 cases under development are very similar to their Nexus 4 cases, and their N4 cases work perfectly with wireless charging. so all there is to do now is wait patiently...
well i guess there's no chance of a november release at this point...
You can still click the links even though there is no product picture up and they state whether the phone can use NFC and or wireless charging on each product. Also the convert is there, a couple of them. I have an email in asking when they might release but no answer yet.
I'm not sure if alot of you know this - but this company has a partnership with bestBuy where they sell the exact same cases under the "platinum series" brand. The fine print on the packaging even says seidio on it and they are roughly HALF the price.
So be on the lookout for these new cases at BestBuy for less cash :laugh:
one troubling thing i noticed is that on their site they still list LG G2 cases as "under development". The G2 was released ~50 days BEFORE the Nexus 5. if THAT's still under development, i'd say the odds of us seeing the N5 cases before 2014 are not great. seems like seidio really screwed up with the timing of this release...
They now have the cases on the website, sent them an enquiry about them working with the wireless chargers and they said that they don't
I wonder if its because of the metal kickstand.
slowpok22 said:
They now have the cases on the website, sent them an enquiry about them working with the wireless chargers and they said that they don't
I wonder if its because of the metal kickstand.
Click to expand...
Click to collapse
i dont believe thats accurate. looks like the same case as the nexus 4 one, and that one most definitely did work with wireless charging
http://www.seidioonline.com/lg-nexus-4-surface-metal-kickstand-case-black-p/csr3lgn4k-bk.htm
The SURFACE™ with Metal Kickstand is tested to be compatible with official Google Nexus 4 Wireless Charger. This product does not interfere with NFC.
indianajonze said:
i dont believe thats accurate. looks like the same case as the nexus 4 one, and that one most definitely did work with wireless charging
http://www.seidioonline.com/lg-nexus-4-surface-metal-kickstand-case-black-p/csr3lgn4k-bk.htm
The SURFACE™ with Metal Kickstand is tested to be compatible with official Google Nexus 4 Wireless Charger. This product does not interfere with NFC.
Click to expand...
Click to collapse
keeping my fingers crossed, I have the i Blason but unfortunately the fit and finish just isn't very good.
Seidio is really pushing for the kickstand.
Dilex and Surface NOW SHIPPING!
I just went to the Seidio web site and the Nexus 5 Surface and Dilex cases/holsters are listed as NOW SHIPPING. I absolutely LOVE Seidio's Convert case for my Galaxy Nexus - it was a big step up from the Otterbox Defender. I'm certainly going to try either the Dilex or Convert (when it's available), but I'm not liking the idea of a kick stand adding to the bulk of the case.
just got my surface combo. the kickstand adds zero bulk. the case is super thin and super light. makes the i-blason i was using kind of brick-like. and wireless charging works just fine, as i suspected
indianajonze said:
just got my surface combo. the kickstand adds zero bulk. the case is super thin and super light. makes the i-blason i was using kind of brick-like. and wireless charging works just fine, as i suspected
Click to expand...
Click to collapse
Could you post some pictures? I was really thinking about getting this case. Thanks.
Sent from my Nexus 5 using Tapatalk
They make my favorite cases but I won't get one till some colors come in. Saying that the kickstand at snowball, they must have changed the design, as every version I've ever had with a kickstand adds about a millimeter
Has anyone seen and\or used car dock with built-in QI charger?
I like this idea: http://www2.robpol86.com/guides/Wireless-Charging-Car-Dock/
Magnetic + wireless charging
Will it work on our devices?
Dragon31337 said:
Has anyone seen and\or used car dock with built-in QI charger?
Click to expand...
Click to collapse
Check out this IndieGoGo project for a wireless (QI) car charger, Air Dock. Sounds like that's what you are looking for. Funding ends in 29 days...
I used an old Samsung qi pad, a cheap universal mount, and a standard micro usb charging cable and made my own.
Dragon31337 said:
Has anyone seen and\or used car dock with built-in QI charger?
Click to expand...
Click to collapse
I found out the hard way that this will NOT work with our devices, for some reason. The new Nexus wireless charger seems to only work with Nexus devices. My Nexus 7 works fine with it, but my Maxx doesn't respond to it at all.
I use the LG Smart Fit 2, it works awesome waiting for iBolt to release theirs to try it out.
Sent from my XT1060 using Tapatalk
opt05 said:
Check out this IndieGoGo project for a wireless (QI) car charger, Air Dock. Sounds like that's what you are looking for. Funding ends in 29 days...
Click to expand...
Click to collapse
I pledged a couple days ago. Hopefully it works with the Maxx. I'm a little concerned that it might not be a free-positioning Qi charger. My Maxx is pretty fussy about how it is placed on cheap Qi chargers.
that Airdock looks awesome, let us know how it turns out.
reggie14 said:
I pledged a couple days ago. Hopefully it works with the Maxx. I'm a little concerned that it might not be a free-positioning Qi charger. My Maxx is pretty fussy about how it is placed on cheap Qi chargers.
Click to expand...
Click to collapse
it's even fussy about positioning on my Energizer 3 position charger
WinDroidGuy said:
it's even fussy about positioning on my Energizer 3 position charger
Click to expand...
Click to collapse
I don't think that's a free-positioning Qi-charger, so that's largely to be expected. I have a couple TYLT Vu chargers. They work pretty well, although I need to center it on the charging dock within about a centimeter. That's not hard to hit, but that's supposed to be one of the most forgiving Qi chargers in terms of positioning.
I'm an early bird on Air Dock. I'll let you know how it works as soon as I get in February.
It said the Air Dock requires a glossy back to work, not sure how the Maxx's kevlar backing will go, but thats the only thing stopping me from ordering one right now.
There is a Nexus 5 version with magnetic field for better grip. I hope it will work all together.
Dragon31337 said:
There is a Nexus 5 version with magnetic field for better grip. I hope it will work all together.
Click to expand...
Click to collapse
Does the Maxx have magnets like the N5?
rmoney said:
Does the Maxx have magnets like the N5?
Click to expand...
Click to collapse
I'm 99.(9)% sure that it has metal body/tray for components inside. So it should stick to magnets in the dock.
rmoney said:
Does the Maxx have magnets like the N5?
Click to expand...
Click to collapse
I have the Mountek nGroove Snap car mount that was used in the DIY charger linked in this thread. The mount comes with metal plates to attach to your phone so that they can be attached to the mount magnetically. The Droid Maxx attaches to the mount without the need of the plates. So yes, either a metal frame or its own set of internal magnets.
Interesting...I might spring for the Air Dock then.
Although it looks like it exploded in popularity and now the price is $63 and delivery a month later.
Good news, Air Dock has raised 60000!
http://www.indiegogo.com/projects/the-air-dock
I can't wait when I get my early bird. I'll share my experience here once I get it.
yeah I do agree Air Dock is a faboulous item, but according to their timetable the first shipping will be on April...
Anyway do you guys think Air Dock will stick to TPU Gel skin cover?
The 'S' shaped one
I`m not quite sure about it..
I'm an early bird and I should get mine in February.
I think it should work with you case just fine. From my point of view it should grip even better comparing to Kevlar.
If you already had a qi Charger (or 2) a Spigen case, tempered glass protector, what else would you buy for your beloved N5?
idbl_fanatic said:
If you already had a qi Charger (or 2) a Spigen case, tempered glass protector, what else would you buy for your beloved N5?
Click to expand...
Click to collapse
An airdock with a cd mount.
Lokke9191 said:
An airdock with a cd mount.
Click to expand...
Click to collapse
That and depending on which spigen case, slap a dbrand skin on it.
Good earphones with build-in mic (I own Xiaomi Piston v2).
A fit bird to carry it
Sent from my Android L Nexus 5 via Tapatalk
nothing short of a 50 acre mansion for my beloved nexus 5
Znamir81 said:
Good earphones with build-in mic (I own Xiaomi Piston v2).
Click to expand...
Click to collapse
how are those earphones? I just ordered mine, I've heard some really good reviews about them.
I'm very satisfied. They look great, sound even better and work flawlessly with my Nexus 5 with all buttons and mic working just like they should. I've bought a lot of stuff for my phone but for me Pistons are one of the best buys ever.
The only downside is that while buying you have to beware of fakes, since the market is flooded with them.
Headphones (Audio Technica M50 )
Dbrand Skin
Znamir81 said:
I'm very satisfied. They look great, sound even better and work flawlessly with my Nexus 5 with all buttons and mic working just like they should. I've bought a lot of stuff for my phone but for me Pistons are one of the best buys ever.
The only downside is that while buying you have to beware of fakes, since the market is flooded with them.
Click to expand...
Click to collapse
Agreed and agreed. Love mine. Work perfect with the n5.
Buy from ibuygou or penonaudio. Both sell 100% real ones.
I have gotten for my N5: A S-Line case, retractable earphones, a dedicated MicroUSB (and USB-A) 2amp car charger (it shows as "Fast Charge" on the lock screen and Ampere reports 1300mA to about 1580 or so mA), SlimPort adapter (not for Maru OS, i'm not even rooted!) and some other things.
I would get a : a dock, a Qi charger (FoneSalesman' QiStone+ is being eyed by me), A SECOND BLACK 32GB NEXUS 5 (Daniel 5 the red N5 and Daniel 5-2, the black N5, maybe?), BlueTooth headphone adapter,etc.
I got mad catz cntlr for gaming..now planning for it controller !!
Sent from my Nexus 5 using XDA-Developers mobile app
In my experience, a Diztronic case to replace the Spigen.
Diztronic? Really? The last one I bought, didn't impress me.
My answer. A DODOcase Durables case. They put the HTC One (M7) case on sale this week, and the M7 almost perfectly matches the Nexus 5's dimensions. I can wait to start carrying it in it. (I have Durables for my Nexus 4, and just got one for my iPod Touch 5gen. they're gorgeous, particularly when you get them for < US$50. Alas, the HTC One cases sold out in a day.)
I also ordered an LG QuickCover folio from Expansys. I always like having a full, book-style case for my phones. And this case is high speed. Light, thin, fits like a glove (better actually), and has a thin plate with magnets to ensure positioning on a Nexus 2013 wireless charger. Superb.