Develop Bugs

Resolved - [email protected] get PIT for mapping

Ive searched the forums and googled this to death and am having trouble finding an answer. I am trying to root my s iii, i have drivers installed. i have all other drivers from all other phones uninstalled. do not have kies installed and odin recognizes my phone just fine. i have odin properly setup, with my cwm tar in the pda but everytime i try to flash it gets stuck at the Get PIT for mapping. after a few mins it fails. ive tried several times, using several different usb ports, keeping all other usb ports free, and using the factory cable. Any help here would be greatly appreciated. thank you in advance:beer:
Sent from my SPH-L710 using xda premium

I had this happen to me as well.The way I fixed it is after it stalled, I unplugged the USB cable from the USB port and plugged it into another port on my PC. It installed the driver again and the process resumed and completed.
Best of luck.

Thank you for the reply. didnt work for me but ill keep trying:thumbup:
Sent from my SPH-L710 using xda premium

18th.abn said:
Thank you for the reply. didnt work for me but ill keep trying:thumbup:
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
use another cord if you have one. and/or try the odin in my attachment.http://db.tt/PVsnbLIM
older version but it works on the s3's just fine

thanks for the help guys. Thinking it is the cable and i didnt have a spare to test with. I rooted using the vzw no odin root and flashed recovery in rom manager so im up and running. Thanks again for the help!
Sent from my SPH-L710 using xda premium

have the exact problem but with sprint
Hey do you know if that process works with sprint i have the same model but with sprint , android version 4.3

odin no funciona
como todo idiota mi telefono estava muy bn y lei en internet que abia una nueva vercion ollipo 5.1.1 y la mia era la 5.1.0 lo sierto es que cuando descargue esa vercion era un rom personalisado que abia que flachearlo por el recovery seme vino a la mente aser un bakup pero nolo ise cuando fui flachear esa vercion no servia para mi gt i9500 bueno en tonses ai estava jodido sin mi rom ni la que descargue bueno desidi flachearlo con el odin yo tenia el archico I9500UBUHOE3_I9500DORHOE2_I9500UBUHOE1_HOME.tar.md5 ya descargado en mi pc por que ya selo abia echo anterior mente
bueno cuando cargo el archivo del rom ofisiar en el odin y conecto el galaxy muy bn en la lapto con wuindos 7 prosigo adarle a estar luego comenso el proseso y pan ni muy bn en pesando me tidise get pit for mapping no pasa de ai lo cavo de llevar a donde un ternico y le ase lo mismo que ocion me pueden fasilitar para revivir mi cel

Hi all
i have a trouble if someone can help me please , i want to reboot my galaxy s3 but in odin it says '' Get PIT for mappin'' and it doesnt want to poursuying the flash
what have i to do ?
thanks

Still Data issues on your phone? I got your fix!

I'm not on sprint thats why data has been an issue for me since the first day I flashed my phone to Tricom(Dominican Republic). I tried so many roms but the only 2 where I get data working where Stock and EOS 4. I wanted to be on the latest version of android so I flashed Carbon and data wasnt working so I decide to figured it out. This is what I did:
1.MAKE A FULL BACKUP OF YOUR CURRENT WORKING SYSTEM.(If it doesnt work for you, you still can go back)
2.Get the zip file of the rom you have data working.(I tried with EOS, Not shure if stock works)
3.Extract the /system/etc/ folder and place it on your sdcard.
4.Now, on your rom with no working data, get a file explorer with root permitions.
5.Copy the "etc" folder on your sdcard and paste it in /system/
6.Set permitions to 0755
7.Reboot
That worked for me, Hope this help someone else.

Help / Ayuda
andriusic said:
I'm not on sprint thats why data has been an issue for me since the first day I flashed my phone to Tricom(Dominican Republic). I tried so many roms but the only 2 where I get data working where Stock and EOS 4. I wanted to be on the latest version of android so I flashed Carbon and data wasnt working so I decide to figured it out. This is what I did:
1.MAKE A FULL BACKUP OF YOUR CURRENT WORKING SYSTEM.(If it doesnt work for you, you still can go back)
2.Get the zip file of the rom you have data working.(I tried with EOS, Not shure if stock works)
3.Extract the /system/etc/ folder and place it on your sdcard.
4.Now, on your rom with no working data, get a file explorer with root permitions.
5.Copy the "etc" folder on your sdcard and paste it in /system/
6.Set permitions to 0755
7.Reboot
That worked for me, Hope this help someone else.
Click to expand...
Click to collapse
Hola, soy de DR y tengo un LGOG tambien, como le configuraste la data?, solo tengo activa la red celular pero no tengo internet. si podrias darme una mano con eso te lo agradeceria
Hi, I'm from DR too and also have a LGOG, How did you configure the data service? I just have configure the phone service without internet, If you could give me a hand of how configure the internet i would appreciate it. thanks

mrgaret87 said:
Hola, soy de DR y tengo un LGOG tambien, como le configuraste la data?, solo tengo activa la red celular pero no tengo internet. si podrias darme una mano con eso te lo agradeceria
Hi, I'm from DR too and also have a LGOG, How did you configure the data service? I just have configure the phone service without internet, If you could give me a hand of how configure the internet i would appreciate it. thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2460552

andriusic said:
http://forum.xda-developers.com/showthread.php?t=2460552
Click to expand...
Click to collapse
Tienes los datos de Tricom? y como consigo el MIN?

mrgaret87 said:
Tienes los datos de Tricom? y como consigo el MIN?
Click to expand...
Click to collapse
Tu MIN es tu numero de teléfono, si ya hiciste lo que te indique en el otro post, ve a un dealer de tricom para que te terminen de programar el celular

andriusic said:
Tu MIN es tu numero de teléfono, si ya hiciste lo que te indique en el otro post, ve a un dealer de tricom para que te terminen de programar el celular
Click to expand...
Click to collapse
Lo he llevado a varios y me dicen que no pueden, a donde lo llevaste especificamente? trate de hacer yo la configuracion pero no me ha funcionado. Hice el paso que me enviaste.

?? ∆_∆
Sent from my Nexus 4 using xda app-developers app

Ha password de tricom
Any of you know the HA Password from tricom, il apriciate it, and please dont bring the ****y amd lame option: go to a dealer. You know they are abusing on the data configuration charging people like 30.00$ (( 900-1000.00$ RD ))

Its this work with CM11 Rom?
Edit: I tried on CM11 and not working, I'm from Indonesia, Carbon/PSX and Vanir Rom have data but CM11 doesn't
Sent from my Optimus G using Tapatalk

dwiedunia said:
Its this work with CM11 Rom?
Edit: I tried on CM11 and not working, I'm from Indonesia, Carbon/PSX and Vanir Rom have data but CM11 doesn't
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
try this one
first, flash cm 10.2 and reboot until data shows up:fingers-crossed:
then reboot to recovery and dirty flash cm11+gapps
voila!
semoga berhasil!

CM10.2 doesn't have data too : (
Sent from my Optimus G using Tapatalk

dwiedunia said:
CM10.2 doesn't have data too : (
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
1.backup your EFS using FreeGee on data-works ROM.
2.flash cm 10.2 unofficial with linaro http://forum.xda-developers.com/showthread.php?t=2435029&page=42+gapps.
3. leave it for 5-15 minutes
4. restore your EFS using FreeGee
5. let it breath for about 5-10 minutes or until data shows up
i'm using smartfren and it works pretty good for me

I'll get a try, thanks mate
* edited
I've got failed message when try to install that ROM, I used latest twrp & cwm
Any suggestion?
Sent from my Optimus G using Tapatalk

dwiedunia said:
I'll get a try, thanks mate
* edited
I've got failed message when try to install that ROM, I used latest twrp & cwm
Any suggestion?
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
Wipe all except storage..if its still wont flash,re-download the rom and try again.

Install 4.4.4 on ZL C6506

Maybe is there other fastest method but here is mine. hope it works to you.
To get 4.4.4 update via OTA, i had to flash .ftf file from this link (http://forum.xda-developers.com/showthread.php?t=2759110)
I flashed it with Flashtool, download it in their webpage (http://www.flashtool.net/downloads.php
---Install the tool and then when you installed it, open the program folder and click on Drivers, and install Flashtool drivers, (I selected Flashmode drivers, Fastboot drivers and Common drivers Lagan Fusion3 board).
----Install drivers and then you just have to copy the FTF file from your download directory to the Firmware directory of the flashtool folder.
-----Open flashtool and select the icon of a Ray and select Flashmode.
-----Select the firmware of your devide (C6506) generic us .230
-----It will says "Preparing files for flashing" Wait until a screen appears telling you what to do, here you will shut down your device (disconnected from usb cable) and when it shut it off, Click in Volume down and connect the usb cable (keep your finger in volume down). The computer will detect the phone and do it stuff, you just have to wait and when the 4.4.2 update is installed to your phone and it starts correctly, go to Settings, about phone and Updates, 4.4.4 will appear by ota.
-Good luck! Feel free to ask me via pm or comment here
(if you have a better method ,good, this is mine and i'm newbie )
Srry for bad spelling, i'm from mexico and i'm learning english x)

I think this is what you need to do to get root (if you don't want to use the firmware for other models).
1. Obtain xperifirm and download both the 4.4.2 and 4.4.4 firmwares. Build ftfs with flashtool.
2. Flash 4.4.2 with flashtool and root (towelroot).
3. Save 4.4.2 kernel
4. Flash 4.4.4 with flashtool
5. Flash 4.4.2 kernel to get root
6. Flash 4.4.4 kernel to have 4.4.4 rooted
I'm going to give it a shot, unless someone else wants to post an easy guide.

go45cvi said:
I think this is what you need to do to get root (if you don't want to use the firmware for other models).
Click to expand...
Click to collapse
Nope, easier than that. Just flash 4.4.2 if you don't have it, root with towelroot and do the OTA. Root remains.

Como hago root? sorry for my spanish :c

Kratoswow said:
Como hago root? sorry for my spanish :c
Click to expand...
Click to collapse
I did read that been in 4.4.4, you had to install the .230 kernel, root it*, and then install the .283 kernel. (It is in a post in this same section)
go45cvi in this post, says that been in 4.4.2 rooted*, and then updating to 4.4.4 via OTA, will mantain the root access. Idk actually. In fact, i haven't updated to 4.4.4 yet, but anyway, i'd recommend you to try this first, you shouldn't lose nothing trying
Leí que estando en 4.4.4, tenías que instalar el kernel .230, rootearlo*, y luego instalar el kernel .283. (Está en un post en esta misma sección)
go45cvi en este post, dice que estando rooteado en 4.4.2, y actualizando a 4.4.4 via OTA, se va a mantener el acceso a root. No se en verdad. De hecho, aún no he actualizado a la 4.4.4, pero de todas maneras te recomiendo que trates esto primero, no debieras perder nada intentándolo
*To root it, the method that worked until 4.4.2, was the geohot's "towelroot" one. Search it in google or here in xda
Para rootearlo, el método que funcionaba hasta la 4.4.2, era el "towelroot" de geohot. Búscalo en google o por aquí en xda
EDIT: http://forum.xda-developers.com/showthread.php?t=2783157

Dannysbkn said:
I did read that been in 4.4.4, you had to install the .230 kernel, root it*, and then install the .283 kernel. (It is in a post in this same section)
go45cvi in this post, says that been in 4.4.2 rooted*, and then updating to 4.4.4 via OTA, will mantain the root access. Idk actually. In fact, i haven't updated to 4.4.4 yet, but anyway, i'd recommend you to try this first, you shouldn't lose nothing trying
Leí que estando en 4.4.4, tenías que instalar el kernel .230, rootearlo*, y luego instalar el kernel .283. (Está en un post en esta misma sección)
go45cvi en este post, dice que estando rooteado en 4.4.2, y actualizando a 4.4.4 via OTA, se va a mantener el acceso a root. No se en verdad. De hecho, aún no he actualizado a la 4.4.4, pero de todas maneras te recomiendo que trates esto primero, no debieras perder nada intentándolo
*To root it, the method that worked until 4.4.2, was the geohot's "towelroot" one. Search it in google or here in xda
Para rootearlo, el método que funcionaba hasta la 4.4.2, era el "towelroot" de geohot. Búscalo en google o por aquí en xda
EDIT: http://forum.xda-developers.com/showthread.php?t=2783157
Click to expand...
Click to collapse
I worked thank you very much!

N920A full Odin package *N920AUCS4CPK1* with Nov security patch

Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.

Muchas gracias desde México, gran ayuda.

smxwang said:
Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.
Click to expand...
Click to collapse
Thanks, man. I did not use your particular link, but you're doing The Good Man's Work.
My only question is... is there a way to know that the full image has not been tempered with? I ended up using the one from The Android Soul that I linked to in my thread. Part of me wonders if they could've been modified or not.

Razielspiritblue said:
Muchas gracias desde México, gran ayuda.
Click to expand...
Click to collapse
Amigo desde que version lo subiste ?

Jairconnor said:
Amigo desde que version lo subiste ?
Click to expand...
Click to collapse
I did it from aucu2bpe6, yo lo hice desde la aucu2bpe6 y flasheo perfecto

Perfecto ...
Tengo un ligero problema las descargas no las completa y siempre tengo que estar dentro de la app donde estoy descargando si me salgo se cancela todo, probe regresar a lollipop pero creo que esta version tiene algun bloque no me deja hacer downgrade .
---------- Post added at 02:56 AM ---------- Previous post was at 02:55 AM ----------
smxwang said:
Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.
Click to expand...
Click to collapse
Esta version no deja hacer downgrade :/

Jairconnor said:
Perfecto ...
Tengo un ligero problema las descargas no las completa y siempre tengo que estar dentro de la app donde estoy descargando si me salgo se cancela todo, probe regresar a lollipop pero creo que esta version tiene algun bloque no me deja hacer downgrade .
---------- Post added at 02:56 AM ---------- Previous post was at 02:55 AM ----------
Esta version no deja hacer downgrade :/
Click to expand...
Click to collapse
Try to doit a full wipe & cache in recovery, im in this update and works fine for me, actually, is better Idle battery, with my other version lost 20%! of battery when i sleep, with this path i only lost 6% during night. Try to write first in english, then you can explain better in spanish.
Trataste ya de hacerle el full wipe y cache desde el recovery? yo tengo esta versión que postearon y me trabaja bien sin ningún detalle incluso la batería mejoro bastante, durante la noche antes perdía 20% de pila, ahora solo pierdo el 6%. Lo del downgrade que yo sepa siempre que brincas desde una versión a otra KK-ll-mm se bloquea el bootloader, por eso no puedes hacer el dowgrade a lollipop, algunas veces es posible hacer downgrade pero dentro del mismo sistema a una version anterior de patch (una version antes pero dentro de las mismas de mm o kk o ll dependiendo de donde estes) pero ya no puedes brincar a una version de andriod anterior, hay manera de instalar versiones pasadas pero ocupas el twrp y una rom de preferencia stock recovery odex o deodex, ademas del kernel de la version de android donde te quedaste, trata de escribir en ingles primero y ya después puedes escribir en español, si no te pueden castigar, ya que es un foro en ingles, te lo digo porque a mi ya me mandaron una ves un correo advirtiendome sobre ban si posteaba primero en español.
---------- Post added at 05:39 PM ---------- Previous post was at 05:34 PM ----------
smxwang said:
Cut a long story short, AT&T push the N920AUCS4CPK1 at Dec 1, this is the full package. People outside the US can download an flash it by Odin.
https://mega.nz/#!4ZhTWQha!WhM0CNQ0FJ-ouH1vRwMo-I8XCZtzK-nKGcZ4OurFwy4
Hope to help everyone, and waiting Android N..... I'm afraid that I couldn't upload the new firmware before it, download them is more expensive.
Click to expand...
Click to collapse
Ty bro, i dont know why but my battery is better with this patch, before when i slept lost 20% of battery by idle, but now, i only lost 6%!! maybe not all patch is for security, can be for system too, well i hope android N come soon, ty for this patch bro!

tanks
thanks for the firmware a live question in Italy once installed have problems with the network or the language?

did u find out any difference of it?

bto001 said:
Try to doit a full wipe & cache in recovery, im in this update and works fine for me, actually, is better Idle battery, with my other version lost 20%! of battery when i sleep, with this path i only lost 6% during night. Try to write first in english, then you can explain better in spanish.
Trataste ya de hacerle el full wipe y cache desde el recovery? yo tengo esta versi�n que postearon y me trabaja bien sin ning�n detalle incluso la bater�a mejoro bastante, durante la noche antes perd�a 20% de pila, ahora solo pierdo el 6%. Lo del downgrade que yo sepa siempre que brincas desde una versi�n a otra KK-ll-mm se bloquea el bootloader, por eso no puedes hacer el dowgrade a lollipop, algunas veces es posible hacer downgrade pero dentro del mismo sistema a una version anterior de patch (una version antes pero dentro de las mismas de mm o kk o ll dependiendo de donde estes) pero ya no puedes brincar a una version de andriod anterior, hay manera de instalar versiones pasadas pero ocupas el twrp y una rom de preferencia stock recovery odex o deodex, ademas del kernel de la version de android donde te quedaste, trata de escribir en ingles primero y ya despu�s puedes escribir en español, si no te pueden castigar, ya que es un foro en ingles, te lo digo porque a mi ya me mandaron una ves un correo advirtiendome sobre ban si posteaba primero en español.
I'll try everything, reboot in recovery modo, full wipes, etc.. in one version past of mm 6.0 did a downgrade to 5.1 but in this version i cant, but my problems are in the downloads i dont know what happend to my phone :/
Eh intentado de todo, hice los wipes corresppnidentes en una version pasada de marsh pude regresar a lollipop pero con esta revision no puedo me gustaria quedarme en marsh pero mi problema esta con las descargas es una falla en el soft imaginó pero no se corrige no se que pasa
Click to expand...
Click to collapse

I'll try everything, reboot in recovery modo, full wipes, etc.. in one version past of mm 6.0 did a downgrade to 5.1 but in this version i cant, but my problems are in the downloads i dont know what happend to my phone :/
Eh intentado de todo, hice los wipes corresppnidentes en una version pasada de marsh pude regresar a lollipop pero con esta revision no puedo me gustaria quedarme en marsh pero mi problema esta con las descargas es una falla en el soft imaginó pero no se corrige no se que pasa[/QUOTE]
Send me a PM, do you repartitione with PIT?, Manda mensaje privado, hiciste la reparticion con el archivo pit o solo pusiste los 4 archivos?

My last update was september patch cph1, let's say i skip the october patch, can i go directly to this last patch update? I'm using odin as i live outside US region..

Hi All,
I have a Note 5 N920A running Android 5.1.1 and build number N920AUCU2AO16. I want to upgrade tyo the latest software which i believe i can from the links posted above (*N920AUCS4CPK1*).
I, however haev one question as this is the first time I am doing anything other than an auto OTA update. Mine was an At&T phone which i purchased in the US on ebay and it was an unlocked one adn i currently use it in the UK with no issues. By upgrading to the latest stock firmware, will i lose the unlocking or has the update nothing to do with unlocking ? Please help.

redklaver said:
My last update was september patch cph1, let's say i skip the october patch, can i go directly to this last patch update? I'm using odin as i live outside US region..
Click to expand...
Click to collapse
Hi, you can install whatever version if you use Odin, can skip from lollipop to MM if you want, no problems with that, but some peoples said to this version blocks the bootloader (cant rollback to LL), in my case i had the boodloader blocker after and dont care for me, you can check if you have the bootloader block in the screen of upgrade (odin mode) if said secure download enable your bootloader is block. For me, this version help me to save battery xD so, its geat for me xD.
Bogus79 said:
Hi All,
I have a Note 5 N920A running Android 5.1.1 and build number N920AUCU2AO16. I want to upgrade tyo the latest software which i believe i can from the links posted above (*N920AUCS4CPK1*).
I, however haev one question as this is the first time I am doing anything other than an auto OTA update. Mine was an At&T phone which i purchased in the US on ebay and it was an unlocked one adn i currently use it in the UK with no issues. By upgrading to the latest stock firmware, will i lose the unlocking or has the update nothing to do with unlocking ? Please help.
Click to expand...
Click to collapse
If you have a factory or IMEI unlock dont worry for lose it, change system not affect unlock, however if you have a home unlock you will lose it, The most certain is that your phone is factory or imei unlock cause i never seen a home unlock for this model, you sould doit whitout afraid.

bto001 said:
Hi, you can install whatever version if you use Odin, can skip from lollipop to MM if you want, no problems with that, but some peoples said to this version blocks the bootloader (cant rollback to LL), in my case i had the boodloader blocker after and dont care for me, you can check if you have the bootloader block in the screen of upgrade (odin mode) if said secure download enable your bootloader is block. For me, this version help me to save battery xD so, its geat for me xD.
If you have a factory or IMEI unlock dont worry for lose it, change system not affect unlock, however if you have a home unlock you will lose it, The most certain is that your phone is factory or imei unlock cause i never seen a home unlock for this model, you sould doit whitout afraid.
Click to expand...
Click to collapse
How do i know if it is home unlock or IMEI/Factory unlock ?

Bogus79 said:
How do i know if it is home unlock or IMEI/Factory unlock ?
Click to expand...
Click to collapse
Not have a way to know it, but for now, note 5 doesnt have a home unlock (except maybe Sprint variant), so your phone is most probably factory or imei unlock, you can actualizate without afraid.

bto001 said:
Hi, you can install whatever version if you use Odin, can skip from lollipop to MM if you want, no problems with that, but some peoples said to this version blocks the bootloader (cant rollback to LL), in my case i had the boodloader blocker after and dont care for me, you can check if you have the bootloader block in the screen of upgrade (odin mode) if said secure download enable your bootloader is block. For me, this version help me to save battery xD so, its geat for me xD.
Even when using adb sideload?
If you have a factory or IMEI unlock dont worry for lose it, change system not affect unlock, however if you have a home unlock you will lose it, The most certain is that your phone is factory or imei unlock cause i never seen a home unlock for this model, you sould doit whitout afraid.
Click to expand...
Click to collapse
How about using adb sideload? Can i just skip from september update to this last december update, or i have to sideloaded the october first?

redklaver said:
How about using adb sideload? Can i just skip from september update to this last december update, or i have to sideloaded the october first?
Click to expand...
Click to collapse
Hi bro, you have donwload this uptade? the files on this post are made for odin (have 4 parts+pit) is not a flashable OTA (flashable zip), this is a complete rom if you want to flash it by adb maybe first you need to convert this on a flashable zip, so, this is a complete rom you can flash from wherever patch you want, adb is most used for some ota's patch (in this case is not only a patch, is a complete rom w/patch), you need use odin this time.

bto001 said:
Hi bro, you have donwload this uptade? the files on this post are made for odin (have 4 parts+pit) is not a flashable OTA (flashable zip), this is a complete rom if you want to flash it by adb maybe first you need to convert this on a flashable zip, so, this is a complete rom you can flash from wherever patch you want, adb is most used for some ota's patch (in this case is not only a patch, is a complete rom w/patch), you need use odin this time.
Click to expand...
Click to collapse
I already download from other source and that is zip file, so it has to be sideloaded..
---------- Post added at 04:03 PM ---------- Previous post was at 03:54 PM ----------
redklaver said:
I already download from other source and that is zip file, so it has to be sideloaded..
Click to expand...
Click to collapse
Oh yeah, i forgot, and it was only 24MB .. so, do i have to sideloaded the patch before this, or can i go straight to this new one?

[/COLOR]
Oh yeah, i forgot, and it was only 24MB .. so, do i have to sideloaded the patch before this, or can i go straight to this new one?[/QUOTE]
If you have only a patch of 24 mb you can sent it by sideload like ota, but you need to install first the other patch ( need to install all patch from your version of SO to this cpk1) this is in case to you want use adb sideload for actualizate to cpk1 you need install every patch from your version until this (install each patch released from your version to cpk1 in order), but if you dont wanna install any patch you can donwload the files from smxwang (this post) it is a complete rom with all patch. Sorry for my english xD im learning it.
Resume:
ADB sideload used to install OTA actualization, in this case you need to install in release order each one.
Odin ROM used to install a complete system, in this case you can install no matter in which system version you are.
If you want use a sideload you need search all patch released from september to december and install in order, otherwise if you dont have all patch you can use this files to install a complete system no metter if you have your sistem in january, march, july, september, doesnt metter.

mexican carrier convert multi csc

Hi, was to much since I don't modify a Samsung device so I need help please.
Want to convert to multi csc to have clean rom(no carrier apps and logos on boot) and then root with twrp.
With the s9 I remember only download firmware desire and flash with Odin, but with note 10 it's the same?
Do you recommend first unlock bootloader and then convert?

Look in the roms, recovery and kernels section, Dr Ketan posted all you need for the exynos note10+ there, y pues que tengas suerte mi buen! Nomas haz todo con cuidado al pie de la letra, preparate bien, bien cargado el cel, cable original, usa de preferencia una laptop bien cargada en vez de una de una de escritorio, por si se va la luz o algo así

Thanks, I read that already but i need to know if it's possible to install multi csc rom without modify anything and then install root and twrp