Tab 3 8 LTE probs with CFW - Galaxy Tab 3 Q&A, Help & Troubleshooting

Sup guys,
I'm facing a problem when I try to install a CFW. Today I recieved the Tab 3 8.0 LTE (shows model number SM-T315).
I installed TWRP successfully, root also worked fine but when installing the unofficial CM (4.4.2) or MOKEE (4.4.2) FW it shows an error like "this is a "tab8wifi"".
What's wrong? Anyone else experienced that error or knows how to solve it?
Thx in advance
Peace

Anon0511 said:
Sup guys,
I'm facing a problem when I try to install a CFW. Today I recieved the Tab 3 8.0 LTE (shows model number SM-T315).
I installed TWRP successfully, root also worked fine but when installing the unofficial CM (4.4.2) or MOKEE (4.4.2) FW it shows an error like "this is a "tab8wifi"".
What's wrong? Anyone else experienced that error or knows how to solve it?
Thx in advance
Peace
Click to expand...
Click to collapse
Where did you get that TWRP?
It has the wrong default.prop in the ramdisk.
Sent from my SCH-I605

gr8nole said:
Where did you get that TWRP?
It has the wrong default.prop in the ramdisk.
Sent from my SCH-I605
Click to expand...
Click to collapse
Hey,
thx for your respond. I used this one:http://forum.xda-developers.com/showthread.php?t=2525630
I'll be back in a few h and will retry with another TWRP! I would appreciate it if you could link me to one.
Peace
EDIT: just flashed the correct PHILZ recov. Will try later.

Here is the correct TWRP (obviously pick the T315 version) - http://forum.xda-developers.com/showthread.php?t=2619518

Gilly10 said:
Here is the correct TWRP (obviously pick the T315 version) - http://forum.xda-developers.com/showthread.php?t=2619518
Click to expand...
Click to collapse
Hey thx, but I already installed the correct PHILZ one. CM installation worked fine! Thx

Anon0511 said:
Hey thx, but I already installed the correct PHILZ one. CM installation worked fine! Thx
Click to expand...
Click to collapse
I got a T-315 too..
Can you please post a link to the correct Philz recovery??
And the CM that you used.?
Thanks... and good job with yours.

jimmbomb said:
I got a T-315 too..
Can you please post a link to the correct Philz recovery??
And the CM that you used.?
Thanks... and good job with yours.
Click to expand...
Click to collapse
Hey, thx.
Ofc I can.
I used this PHILZ flashed via Odin: http://forum.xda-developers.com/showthread.php?t=2598976
And this CM: http://forum.xda-developers.com/showthread.php?t=2557573
Good luck m8!

Related

[GT-i9500] CWM 6.0.3.1 RECOVERY & ROOT (Big Update on NEW VERSION! )

update 3-5-2013: the developer Cofface himself is now in XDA and posted a new verison of recovery HERE!
* All credit goes to Chinese developer Cofface *
GOOD NEWS!
This should be the easiest way to root the i9500 (yes, the so called 8-core one) by now.
Tested on FW I9500ZCUAMDG and should be working on others.
Recovery Feature:
1. Based on CWM 6.0.3.1 (Thanks CM Team!)
2. ROOT your phone
Just download the recovery and unzip it, flash the cofface_I9500_cwm_recovery_en_new.tar as PDA in Odin.
Then turn off the phone and enter recovery by pressing Vol Up+Home+Power keys, and select ROOT YOUR PHONE, reboot, DONE.
Download: Hotfile Dropbox
update: Some Russian FW users reported this will not work, i've inform the developer Cofface and will update later if he fixed this. And here is a way to root Russian FW.
update2: I've talked to Cofface and he is on vacation now but if you need further helps, feel free to contact with him via Gtalk: [email protected]
update3: Here is a video tutorial by ashwin123, thanks!
https://www.youtube.com/watch?v=SajfKZBjvuQ
Thanks
Sent from my GT-I9300 with a BIG
jaidev.s said:
Thanks
Sent from my GT-I9300 with a BIG
Click to expand...
Click to collapse
You're welcome, hope it helps.:fingers-crossed:
Works on my I9500!
Tutsumi said:
Works on my I9500!
Click to expand...
Click to collapse
So are you able to get titanium backup to work now? This root is full root right? No catch anywhere?
Hi !!!
Good news...
But i tried, and it doesn't work.
After reboot, i see that SuperSU is installed, but it is not working. Impossible to update the binaries, and no "root applications" working.
Was a good try
fsw23 said:
Hi !!!
Good news...
But i tried, and it doesn't work.
After reboot, i see that SuperSU is installed, but it is not working. Impossible to update the binaries, and no "root applications" working.
Was a good try
Click to expand...
Click to collapse
You, good sir, probably did something wrong. Mine's working just fine with Titanium Backup Pro, rooted.
twisted_mind said:
So are you able to get titanium backup to work now? This root is full root right? No catch anywhere?
Click to expand...
Click to collapse
Working just fine for me right now, see my above post.
fsw23 said:
Hi !!!
Good news...
But i tried, and it doesn't work.
After reboot, i see that SuperSU is installed, but it is not working. Impossible to update the binaries, and no "root applications" working.
Was a good try
Click to expand...
Click to collapse
Thanks bro for clarifying this. Hope chainfire gets his magic working on the I9500 soon.
---------- Post added at 09:34 AM ---------- Previous post was at 09:32 AM ----------
Tutsumi said:
You, good sir, probably did something wrong. Mine's working just fine with Titanium Backup Pro, rooted.
Click to expand...
Click to collapse
Ah cool. Sweet. Thanks mate for clearing it out.
Gotta try it now. Will post back the results.
Tutsumi said:
You, good sir, probably did something wrong. Mine's working just fine with Titanium Backup Pro, rooted.
Click to expand...
Click to collapse
twisted_mind said:
Thanks bro for clarifying this. Hope chainfire gets his magic working on the I9500 soon.
---------- Post added at 09:34 AM ---------- Previous post was at 09:32 AM ----------
Ah cool. Sweet. Thanks mate for clearing it out.
Gotta try it now. Will post back the results.
Click to expand...
Click to collapse
About mine, i pushed CWM with odin, then did a reboot, clicked the "root" option, and did a reboot.That's it
BUT, my i9500 has the russian firmware, wich is : Russia - 2013 April - 4.2.2 - I9500XXUAMDK - I9500SERAMDK
It may be the "problem"..!?
Yeah just did the process..... Unable to get my root apps to work... i have a feeling it has to do with the firmware. Mine is also the russian fw.... Gotta flash the chinese one and then see..
fsw23 said:
About mine, i pushed CWM with odin, then did a reboot, clicked the "root" option, and did a reboot.That's it
BUT, my i9500 has the russian firmware, wich is : Russia - 2013 April - 4.2.2 - I9500XXUAMDK - I9500SERAMDK
It may be the "problem"..!?
Click to expand...
Click to collapse
Perhaps? Perhaps give it another shot using Odin which is in the ZIP, be USB debugged, and set not as a camera?
fsw23 said:
Hi !!!
Good news...
But i tried, and it doesn't work.
After reboot, i see that SuperSU is installed, but it is not working. Impossible to update the binaries, and no "root applications" working.
Was a good try
Click to expand...
Click to collapse
try flash again? We've tested this in China on say 7 i9500s, and it all worked.:laugh:
Tutsumi said:
Works on my I9500!
Click to expand...
Click to collapse
thanks~~:victory:
GSeeker said:
try flash again? We've tested this in China on say 7 i9500s, and it all worked.:laugh:
Click to expand...
Click to collapse
Nice. Downloading the chinese firmware now... Hopefully i turn out to be as lucky as the 7 that you tested
twisted_mind said:
Nice. Downloading the chinese firmware now... Hopefully i turn out to be as lucky as the 7 that you tested
Click to expand...
Click to collapse
thanks for trying this out mate~ good luck~:fingers-crossed:
Tutsumi said:
Perhaps? Perhaps give it another shot using Odin which is in the ZIP, be USB debugged, and set not as a camera?
Click to expand...
Click to collapse
It didn't help !
people who got it rooted pls do post the firmware version, will be useful for others
GSeeker said:
try flash again? We've tested this in China on say 7 i9500s, and it all worked.:laugh:
Click to expand...
Click to collapse
Thanks Gseeker... I'm in China, and bought mine here too, but i flashed the russian firmware to get the european languages (the chinese firmware has got only chinese, english, and corean languages).
And unfortunately, i didn't get your CWM method working on it...
Baseband Version: I9500UBUAMDE
Build Number: JDQ39.I9500UBUAMDE
Mine worked.
Bought it from in the Bahamas, uploading the system dump (non-root) as we speak.

[C6903]Pre-rooted 14.5.A.0.242_R4D_O2 Germany+XZDualRecovery 2.8.7 Flashable.zip

Here is the latest lollipop 14.5.A.0.242_R4D BRANDED German O2, pre-rooted with the latest XZDualRecovery 2.8.7 and ROOT (latest SuperSu 2.48)!
Thank you guys @zxz0O0 @[NUT]
Requirement:
rooted C6903 LB or UB with working recovery
Instalation:
Download the flashable zip.
Copy to external storage.
Reboot to recovery.
do a backup in case.
Wipe data cache/dalvik cache.
Flash zip from recovery.
enjoy
Downoad here
If my help was useful just click thanks!
Reserved
Excited noob
Just flash the zip in recovery? Will the kernel for kitkat work for lollipop?
If this zip contains the lollipop kernel, how can it be flashed over recovery? Wouldn't it need to be flashed from flashtool?
firdyRAY said:
Just flash the zip in recovery? Will the kernel for kitkat work for lollipop?
If this zip contains the lollipop kernel, how can it be flashed over recovery? Wouldn't it need to be flashed from flashtool?
Click to expand...
Click to collapse
The kernel will be automatically flashed via recovery,don't need flashtool
Sun_ said:
The kernel will be automatically flashed via recovery,don't need flashtool
Click to expand...
Click to collapse
Odex or deodex?
firdyRAY said:
Odex or deodex?
Click to expand...
Click to collapse
Odex
Can I flash this using Philz recovery?
Whats difference between this and previous rooted one?
nalab1 said:
Can I flash this using Philz recovery?
Click to expand...
Click to collapse
Yes
shingers5 said:
Whats difference between this and previous rooted one?
Click to expand...
Click to collapse
Wich one?
Sun_ said:
Yes
Click to expand...
Click to collapse
Cool!
Please make deodex
shingers5 said:
Whats difference between this and previous rooted one?
Click to expand...
Click to collapse
Sun_ said:
Wich one?
Click to expand...
Click to collapse
Well I think the base is different, isn't it? German O2?
Flashed with MultiROM TWRP, just to test as a secondary ROM, bad luck I guess. It installs as it should, but does not boot. Something about MultiROM error. I guess maybe because of the size of the zip file.
Does this rom is only for Germany brand? Or it's already debranded?
adamkx7xdesire said:
Does this rom is only for Germany brand? Or it's already debranded?
Click to expand...
Click to collapse
There are only some o2 sys Apps...
trahzebuck said:
Well I think the base is different, isn't it? German O2?
Click to expand...
Click to collapse
yes it's the German O2 , first post....
Sun_ said:
yes it's the German O2 , first post....
Click to expand...
Click to collapse
This was not question and I think you know it. :laugh::highfive:
I have installed this version meanwhile and it look really good!
As it's stock I had to debloat it heavily before I installed my apps. But now it's running fine.
One question: Why do you add Recovery 2.8.7? Latest is 2.8.10. Just curious...
btw. I hate the new structure of Lollipop Zips with /system in one image. I loved to debloat roms before flashing. Sigh...
Thanks for sharing this!
trahzebuck said:
This was not question and I think you know it. :laugh::highfive:
I have installed this version meanwhile and it look really good!
As it's stock I had to debloat it heavily before I installed my apps. But now it's running fine.
One question: Why do you add Recovery 2.8.7? Latest is 2.8.10. Just curious...
btw. I hate the new structure of Lollipop Zips with /system in one image. I loved to debloat roms before flashing. Sigh...
Thanks for sharing this!
Click to expand...
Click to collapse
Thanks also for your positive feedback
I put the recovery 2.8.7 because, in my opinion, the latest version for Z1 running L is still buggy, I had problems with the Internal SD,not with root but I think the folder structure...
And at the moment I'm really busy, I don't have time to build a bebloated rom / deodexed, maybe in a few weeks.....
Bootloop & can't enter Recovery
see title.. was on liquidsmooth 5.0.2 .. flashed via TWRP .. made Factory Reset etc. Now Bootloop and cant enter Recovery.. Yay
I tried every button combination .. it always tries to boot.. and reboots..
I also tried flashing the FTF - C6903_5.0.2_C6903.ftf -- Also Bootloop .. anyone an idea what the problem could be?

TWRP 3.0.0-0 for 4.4.4

The development team TeamWin - TWRP has created a new version of TWRP 3.0.0-0 Released for a variety of smart phones, including our .tak how many smartphones, not all all works correctly. With regard to our Samsung GT-I9300I Galaxy S III Duos, incorrectly stated the date created backup-a, since its establishment, it is better to change the date on the real, not to get confused later. In the setting of the TWRP, you need to set the time zone UTC +12 for the proper display time of your zone.
For flashing TWRP 3.0.0-0 use Flashify program: Flashify (for root users) or Rashr: ®Rashr - Flash Tool. Remove from the archive file using any file manager.
Added file to Flash via recovery
In to TWRP 2.8.7.0 , too - the same bug.
You can do a zip installed by recovery?
example:
package_extract_file("recovery.img", "/dev/block/platform/msm_sdcc.1/by-name/recovery");
It is not possible?
Renix63 said:
You can do a zip installed by recovery?
example:
package_extract_file("recovery.img", "/dev/block/platform/msm_sdcc.1/by-name/recovery");
It is not possible?
Click to expand...
Click to collapse
It may be . Now do
simple use this: https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
MAXSIMUS96 said:
It may be . Now do
Click to expand...
Click to collapse
Thanks :good:
kingroot to root my Mobile S3 neo Dual GT-i9300i
is risk method ya No Risk
Bootloop any Demege
plzz suggest
Install twrp with odin. Then supersu via recovery
Inviato dal mio GT-I9301I utilizzando Tapatalk
Will this work on an i9301i? Might be helpful to clarify that.
aelfinn said:
Will this work on an i9301i? Might be helpful to clarify that.
Click to expand...
Click to collapse
this for i9300i only
MAXSIMUS96 said:
this for i9300i only
Click to expand...
Click to collapse
I have it on I9301I and works good.
Fact - I downloaded file from TWRP site.
Gt-I9300i Not Working your TWRP .My mobile root
kingroot app this root My Mobile
Ali Asgar said:
Gt-I9300i Not Working your TWRP .My mobile root
kingroot app this root My Mobile
Click to expand...
Click to collapse
Install twrp with odin!!!!
Inviato dal mio GT-I9301I utilizzando Tapatalk
after flashing with Flashify, my phone reboot and go to download mode, try to remove the batter and restart, still at the download mode, can't get in, any clue ????
*My phone is i9300I, android 4.3, Recovery: TWRP 2.7.1.0
One suggestion I have just tried out that people here might appreciate: Install official TWRP 3.0 via TWRP Manager (install from Google Play). Seems to work without a problem on my i9301i.
aelfinn said:
Will this work on an i9301i? Might be helpful to clarify that.
Click to expand...
Click to collapse
badboyblue said:
after flashing with Flashify, my phone reboot and go to download mode, try to remove the batter and restart, still at the download mode, can't get in, any clue ????
*My phone is i9300I, android 4.3, Recovery: TWRP 2.7.1.0
Click to expand...
Click to collapse
It's for 4.4.4
if I have 5.5.9 RR lollipop .....
I can update the TWRP that I have
I'm using 2.8.4.0 without fear of some brick ??????
frank1980 said:
if I have 5.5.9 RR lollipop .....
I can update the TWRP that I have
I'm using 2.8.4.0 without fear of some brick ??????
Click to expand...
Click to collapse
I had RR 5.5.8 and I flashed this version but from TWRP site - in this thread meybe is only for KK 4.4.4..
Check THIS and instal img file in TWRP is an option "flash img file" on the right bottom in menu Instal.
nalas said:
I had RR 5.5.8 and I flashed this version but from TWRP site - in this thread meybe is only for KK 4.4.4..
Check THIS and instal img file in TWRP is an option "flash img file" on the right bottom in menu Instal.
Click to expand...
Click to collapse
:good:thanks man but i have a GT I9300I neo dual sim
no have some problem??? sorry my bad english thanks
frank1980 said:
:good:thanks man but i have a GT I9300I neo dual sim
no have some problem??? sorry my bad english thanks
Click to expand...
Click to collapse
I think TWRP 3.0.0.0 works great even on I9300I .

[ROM]LeEco S2/S3 5.8.021S factory image.

Got my hands again on the stock factory image Will be providing link for it soon for people to customize it, and hopefully @codeworkx can take the camera improvements for these and put it to the LineageOS 13 to improve camera function.
https://www.mediafire.com/?6almos553oh0xg6
Enjoy.
Chinese ROM right?
Sent from my X526 using Tapatalk
This is the for the American x522 but I have it installed on my X527 and it works perfectly.
Wow!!! Eagerly waiting to try something bugfree n stockish...:silly:
Waiting for the link
Akhil16 said:
Wow!!! Eagerly waiting to try something bugfree n stockish...:silly:
Click to expand...
Click to collapse
Stockish no, it's the official stock ROM.
Waiting for the full tom link. And how to update/Flash it?
I stucked on 5.8.15s. No OTA update
Gingernut78 said:
Stockish no, it's the official stock ROM.
Click to expand...
Click to collapse
Thanku so muchh sir... I didnt knew it ws stock
N where is the link op???
How much more time for posting the link???
He wrote 'soon'
Could have been some hours, or can be months.....
Since there is no Rom is uploaded, it should be moved to general discussion.
JamBax said:
He wrote 'soon'
Could have been some hours, or can be months.....
Click to expand...
Click to collapse
LOL... Apologize for the delay but it's now up!
But now I know what the other devs feels when people keep asking for ETA :\
Will it work on x526?
Ashish Banka said:
Will it work on x526?
Click to expand...
Click to collapse
Yes
Can you please post some screenshot of the changes and also please confirm if VoLTE and jio are working fine on indian version x526 also please confirm as in the latest update of american version the app drawer button is added so is it there in this update or not. Are there any Chinese or any other bloatware in it???
hey so i downloaded it
but while installing thru twrp 3.0.2 official one its is showing error :7
this zip is for le_s2_na and your device is s2... i m installing it on my x526 le 2 indian version... so whats wrong ??
Akhil16 said:
hey so i downloaded it
but while installing thru twrp 3.0.2 official one its is showing error :7
this zip is for le_s2_na and your device is s2... i m installing it on my x526 le 2 indian version... so whats wrong ??
Click to expand...
Click to collapse
Flash it via stock recovery
shivam321998 said:
Flash it via stock recovery
Click to expand...
Click to collapse
tried to upgrade from stock recovery:
Upgrade failed!
Electric Blue said:
tried to upgrade from stock recovery:
Upgrade failed!
Click to expand...
Click to collapse
Let's go for the hardway
open the zip on your PC send me the screenshot of updater-script, open it by notepad++(ROMzip>>>meta-inf/com/google/android)
shivam321998 said:
Let's go for the hardway
open the zip on your PC send me the screenshot of updater-script, open it by notepad++(ROMzip>>>meta-inf/com/google/android)
Click to expand...
Click to collapse
here is the screenshot u needed

[7.0][29/3/2017][v3] khongloi-nougat rom | aod | edge...

amazing and perfect rom. orjinal forum therad : https://forum.xda-developers.com/note5/development/7-0-khongloi-nougat-rom-aod-edge-t3580620
Not for S6edge+
daxiaamu said:
Not for S6edge+
Click to expand...
Click to collapse
"Support for various devices: N920x (N920T/W8, N920CIG, N920CD, N9208), G928x (G928CIGF, G928T/W8, G9287C)".
any news for the fix of 4G?
Hi
daxiaamu said:
Not for S6edge+
Click to expand...
Click to collapse
Lte network has been corrected. It works perfectly on my 928C phone
sefa06 said:
Lte network has been corrected. It works perfectly on my 928C phone
Click to expand...
Click to collapse
did you use s7e port? lte still not working on my 928c. thanks
hi
jinooooooo said:
did you use s7e port? lte still not working on my 928c. thanks
Click to expand...
Click to collapse
Yes I used the s7 rum. Recommend clean installation. No need to install kernel just enough to do rum installation
My G928F boots only if I choose supersu root in aroma, but no signal.
Inviato dal mio SM-N920C utilizzando Tapatalk
sefa06 said:
Yes I used the s7 rum. Recommend clean installation. No need to install kernel just enough to do rum installation
Click to expand...
Click to collapse
okay i will try doing a clean install. i came from infinity rom nougat v4. hopefully this works. everything works fine. just the lte signal not working and some random reboots. thanks sir!
lte fix
S7ePort-V3-Network ve LTE Fix.zip
Restarts will be fixed shortly. Thx
Lte fix
blackbravo said:
any news for the fix of 4G?
Click to expand...
Click to collapse
S7ePort-V3-Network ve LTE Fix.zip
sefa06 said:
S7ePort-V3-Network ve LTE Fix.zip
Click to expand...
Click to collapse
Its working fine?
hi
blackbravo said:
Its working fine?
Click to expand...
Click to collapse
yes perfect
sefa06 said:
yes perfect
Click to expand...
Click to collapse
thanks man going to try
Could you please add G9280 support?
S7e port v3. In aroma there is no option for g928c. Does this support it or not? Pls tell
Ali Naqi said:
S7e port v3. In aroma there is no option for g928c. Does this support it or not? Pls tell
Click to expand...
Click to collapse
Set the 928f variant. Compatible with the 928c. All s6 edge support
Good morning all. I would like to ask you about installation this Rom on 928f. If it's possible someone can write step by step how do this correctly? It's what I do and didn't work.
I have custom Recovery TWRP official for 928f. I copy the rom on the fone after installation, in aroma I choice my model. Installation complete press restart system and its bootlop only I see samsung s6 edge plus logo. After I put on the pendrive kernel v15 for 928f I installed this but it's problem when I see " create patch" on this is stoped for few hours and nothing happen. Please someone can help me. Best regards all
DomiHD said:
Good morning all. I would like to ask you about installation this Rom on 928f. If it's possible someone can write step by step how do this correctly? It's what I do and didn't work.
I have custom Recovery TWRP official for 928f. I copy the rom on the fone after installation, in aroma I choice my model. Installation complete press restart system and its bootlop only I see samsung s6 edge plus logo. After I put on the pendrive kernel v15 for 928f I installed this but it's problem when I see " create patch" on this is stoped for few hours and nothing happen. Please someone can help me. Best regards all
Click to expand...
Click to collapse
Kernel v15 is for MM rom. If you want to flash Nougat v3 rom on g928f choose supersu root in aroma (with Magisk or no root my device boot in recovery) if doesn't boot yet reflash khongloi kernel v3. These steps work for me
I installed the ROM and it's not booting. After showing the boot logo the screen goes blank It isn't booting into twrp.
But boots into download mode. I selected root with magisk and the first option when modem selection.
I was on Mm ambassdi port of Note 7.
Also. It shows kernerl not seandroid enforcing
Pls help

Categories

Resources