[7.0][29/3/2017][v3] khongloi-nougat rom | aod | edge... - Galaxy S6 Edge+ General

amazing and perfect rom. orjinal forum therad : https://forum.xda-developers.com/note5/development/7-0-khongloi-nougat-rom-aod-edge-t3580620

Not for S6edge+

daxiaamu said:
Not for S6edge+
Click to expand...
Click to collapse
"Support for various devices: N920x (N920T/W8, N920CIG, N920CD, N9208), G928x (G928CIGF, G928T/W8, G9287C)".

any news for the fix of 4G?

Hi
daxiaamu said:
Not for S6edge+
Click to expand...
Click to collapse
Lte network has been corrected. It works perfectly on my 928C phone

sefa06 said:
Lte network has been corrected. It works perfectly on my 928C phone
Click to expand...
Click to collapse
did you use s7e port? lte still not working on my 928c. thanks

hi
jinooooooo said:
did you use s7e port? lte still not working on my 928c. thanks
Click to expand...
Click to collapse
Yes I used the s7 rum. Recommend clean installation. No need to install kernel just enough to do rum installation

My G928F boots only if I choose supersu root in aroma, but no signal.
Inviato dal mio SM-N920C utilizzando Tapatalk

sefa06 said:
Yes I used the s7 rum. Recommend clean installation. No need to install kernel just enough to do rum installation
Click to expand...
Click to collapse
okay i will try doing a clean install. i came from infinity rom nougat v4. hopefully this works. everything works fine. just the lte signal not working and some random reboots. thanks sir!

lte fix
S7ePort-V3-Network ve LTE Fix.zip
Restarts will be fixed shortly. Thx

Lte fix
blackbravo said:
any news for the fix of 4G?
Click to expand...
Click to collapse
S7ePort-V3-Network ve LTE Fix.zip

sefa06 said:
S7ePort-V3-Network ve LTE Fix.zip
Click to expand...
Click to collapse
Its working fine?

hi
blackbravo said:
Its working fine?
Click to expand...
Click to collapse
yes perfect

sefa06 said:
yes perfect
Click to expand...
Click to collapse
thanks man going to try

Could you please add G9280 support?

S7e port v3. In aroma there is no option for g928c. Does this support it or not? Pls tell

Ali Naqi said:
S7e port v3. In aroma there is no option for g928c. Does this support it or not? Pls tell
Click to expand...
Click to collapse
Set the 928f variant. Compatible with the 928c. All s6 edge support

Good morning all. I would like to ask you about installation this Rom on 928f. If it's possible someone can write step by step how do this correctly? It's what I do and didn't work.
I have custom Recovery TWRP official for 928f. I copy the rom on the fone after installation, in aroma I choice my model. Installation complete press restart system and its bootlop only I see samsung s6 edge plus logo. After I put on the pendrive kernel v15 for 928f I installed this but it's problem when I see " create patch" on this is stoped for few hours and nothing happen. Please someone can help me. Best regards all

DomiHD said:
Good morning all. I would like to ask you about installation this Rom on 928f. If it's possible someone can write step by step how do this correctly? It's what I do and didn't work.
I have custom Recovery TWRP official for 928f. I copy the rom on the fone after installation, in aroma I choice my model. Installation complete press restart system and its bootlop only I see samsung s6 edge plus logo. After I put on the pendrive kernel v15 for 928f I installed this but it's problem when I see " create patch" on this is stoped for few hours and nothing happen. Please someone can help me. Best regards all
Click to expand...
Click to collapse
Kernel v15 is for MM rom. If you want to flash Nougat v3 rom on g928f choose supersu root in aroma (with Magisk or no root my device boot in recovery) if doesn't boot yet reflash khongloi kernel v3. These steps work for me

I installed the ROM and it's not booting. After showing the boot logo the screen goes blank It isn't booting into twrp.
But boots into download mode. I selected root with magisk and the first option when modem selection.
I was on Mm ambassdi port of Note 7.
Also. It shows kernerl not seandroid enforcing
Pls help

Related

[MOD][5.0.X] Single Sim rom to Dual Sim

This mod turns your SINGLE SIM rom ( so for XT1064/3 devices ) into a DUAL SIM rom ( so for XT1068/9 devices )
This mod work with stock lollipop roms
Don't try with kitkat
Intructions :
Flash XT1064/3 rom
Flash my mod
Reboot
Download : https://www.androidfilehost.com/?fid=95897840722644577
Thanks
anyone tried?
Thanks btw
Sent from my XT1068
Works great! flashed Titan Prime 1.0.5 and then the mod
Perfcect DUAL SIM working after patch ?
Voice and DATA for Sim1 and Sim2 ?
For me perfect DUAL-Sim handling is very very important !!
Now i am on original 4.4.4 and i want to
1) open bootloader
2) install TWRP
3) install the best 5.02 for XT1068 "on market"
for the first time !!
Well i tried on stock 5.0.2 andere it did not work. I get multisimsetting is stopt
patvdzwan said:
Well i tried on stock 5.0.2 andere it did not work. I get multisimsetting is stopt
Click to expand...
Click to collapse
It worked in the latest XT1064 release
Wipre cache and dalvik
Did that and still not working. Going to trie on shawns rom 1.0.5 now
Sent from my XT1063 using XDA Free mobile app
patvdzwan said:
Did that and still not working. Going to trie on shawns rom 1.0.5 now
Sent from my XT1063 using XDA Free mobile app
Click to expand...
Click to collapse
I just found a bug
I'll update the mod immidiately
https://www.androidfilehost.com/?fid=95897840722642701
luca020400 said:
It worked in the latest XT1064 release
Wipre cache and dalvik
Click to expand...
Click to collapse
I tied it on shawns rom to and I get the same error. Multisimsettings has stopped. I do exactly what I supposed to do. I wiped dalviccase after rom install and after your mod. What can be the problem. I trie to re-download the mod maybe that will help.
patvdzwan said:
I tied it on shawns rom to and I get the same error. Multisimsettings has stopped. I do exactly what I supposed to do. I wiped dalviccase after rom install and after your mod. What can be the problem. I trie to re-download the mod maybe that will help.
Click to expand...
Click to collapse
Try the new version in op
luca020400 said:
Try the new version in op
Click to expand...
Click to collapse
Still doesn't work. I did a clean install and i get the same massege, multisimsettings stopped
Want to convert my dual sim version to single sim any help?
Am I the only one with this problem? Or is It realy a bug?
patvdzwan said:
Am I the only one with this problem? Or is It realy a bug?
Click to expand...
Click to collapse
I will try it now.
djekan said:
I will try it now.
Click to expand...
Click to collapse
The same problem with me...
i flashed it
it is not working
i did a clean install
1st i flashed titan prime v1.0.6
then your latest mod
geting a FC when i open multisim settings
sonic254 said:
i flashed it
it is not working
i did a clean install
1st i flashed titan prime v1.0.6
then your latest mod
geting a FC when i open multisim settings
Click to expand...
Click to collapse
Hmm OK
Today i'm going to flash the titan prime 1.0.6 and fix it
Thanks works perfect :good::good:
Would be great if its compatible with Titan Prime 1.0.6

[APP] Xposed Framework Experimental for S6/S6 Edge

Hi Friends!
I was looking for some mods to my galaxy S6 Edge and I found new Xposed for S6/S6 Edge. As i read on the thread, only works on 5.1.1 rooted roms and logically, trip knox..
Follow the link: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Enjoy! :silly: [emoji23] :victory:
That is good news!
I tried everything works beautifully on CarHDRom V 7 +UniKernel v6
viki-bg said:
That is good news!
I tried everything works beautifully on CarHDRom V 7 +UniKernel v6
Click to expand...
Click to collapse
Awesome buddy! I didn't try this method because i'm trying to keep my knox not triped, but sharing information is always good! :good: :good:
on T-Mobile S6-Edge stuck on bootloop
i tried to install it on my device. i stuck in bootloop...
:crying:
raman21raman said:
i tried to install it on my device. i stuck in bootloop...
:crying:
Click to expand...
Click to collapse
change phone
lol already fixed my device working...fine again...
Installed Yesterday after seeing this post, all working fine it was the only thing missing from my S6 Edge glad its finally here
hlhmark said:
Installed Yesterday after seeing this post, all working fine it was the only thing missing from my S6 Edge glad its finally here
Click to expand...
Click to collapse
I'm glad you did it.. awesome mate!!
Enviado de meu SM-G925I usando Tapatalk
I tried it but does not work
How can i install it step by step (G925i) ??????
Thanks a lot.
Hi I try on my G925F it works see my feeback
I do a backup before...
I had some problem after enabling some modules
My experience is any change of Android Market(as luckypatcher) will generate bootloop
In case of bootloop , two solution , just reinstall through TWRP the Xposed framework again, or Restore only system part...
It takes time to recompile all apps , but it works..
Thanks
Same thing happened in my G920T. I had to re flash firmware & I'm still without exposed, how did u fix?
MadLinx said:
Same thing happened in my G920T. I had to re flash firmware & I'm still without exposed, how did u fix?
Click to expand...
Click to collapse
Are you talking about boot loop?? There was an update for the xposed framework!

[RECOVERY][SM-E500] TeamWin Recovery Project (TWRP) 2.8.1.0

Hey everyone. This is TWRP recovery that I compiled for the Galaxy E5 lte version (SM-E500F.)
It has been tested in F and M variant
curently tested on :
1.SM-E500F
2.SM-E500M
you can test it on your phone and report here if its working for you.I will then add it to the list.
Disclaimer:
If you have decided to install this recovery on your device, I cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences you may experience (bricks,.). By installing this custom ROM you lose your phone's warranty.
By installing this, you accept this disclaimer.
Click to expand...
Click to collapse
>>HOW TO FLASH VIA ODIN:
1)Boot into download mode by pressing volume down,home button and power on button
2)start odin and connect phone with the usb cable
3)put the recovery package in AP or PDA tab.
4)check that only F.reset time and Auto reboot are checked
5)Flash and enjoy.:angel:
ISSUES:
-brightness is not yet working
-reboot to recovery boots back to system.
'
DOWNLOAD:
For SM-E500F
SM-E500F TWRP
Click to expand...
Click to collapse
For SM-E500M
SM-E500M twrp
Click to expand...
Click to collapse
Credits:
TWRP: for creating the awesome recovery
@eabz2000 : for help and testing
 @Bin.g dallie
Press thanks if it was useful to you
Device tree
Kernel source
Tested on variant SM-E500M.
- Brightness not working.
- But reboot to system is working perfect.
only for e5? nothing for e7?
Chaninoza said:
only for e5? nothing for e7?
Click to expand...
Click to collapse
Dont worry @Chaninoza. I have both E5 and E7 . I will compile for E7 after Its stable enough. It will be in couple of weeks.
Make a CWM for galaxy E5-E500H 5.1.1
Sent from my SM-E500H using Tapatalk
Sabbir. said:
Make a CWM for galaxy E5-E500H 5.1.1
Sent from my SM-E500H using Tapatalk
Click to expand...
Click to collapse
Sabbir. TWRP for SM-E500H already exists. Here is link: http://forum.xda-developers.com/galaxy-e-series/orig-development/recovery-twrp-galaxy-e5-t3209865
Help
Sabbir. said:
Help
Click to expand...
Click to collapse
Qhat help do you need?
Can't ifnd file
My Odin isn't recognizing the .img file
iPepita said:
My Odin isn't recognizing the .img file
Click to expand...
Click to collapse
Use flashify for flashing the img file
nepalbiraj said:
Dont worry @Chaninoza. I have both E5 and E7 . I will compile for E7 after Its stable enough. It will be in couple of weeks.
Click to expand...
Click to collapse
the rom E500M works in E700M ? 5.1.1
LudwigFerdinand18 said:
the rom E500M works in E700M ? 5.1.1
Click to expand...
Click to collapse
no E500M rom doesnot work on E700M
nepalbiraj said:
no E500M rom doesnot work on E700M
Click to expand...
Click to collapse
for example I pick up a rom from another cell by TWRP backup and modify the build.prop ... work just changing the partition / system?
LudwigFerdinand18 said:
for example I pick up a rom from another cell by TWRP backup and modify the build.prop ... work just changing the partition / system?
Click to expand...
Click to collapse
You can try and see if it boots.
It's working on 4.4.4 and 5.1.1 you don't need to worry about it
Without using odin
You can install it from your phone ? Without using odin

TWRP 3.0.0-0 for 4.4.4

The development team TeamWin - TWRP has created a new version of TWRP 3.0.0-0 Released for a variety of smart phones, including our .tak how many smartphones, not all all works correctly. With regard to our Samsung GT-I9300I Galaxy S III Duos, incorrectly stated the date created backup-a, since its establishment, it is better to change the date on the real, not to get confused later. In the setting of the TWRP, you need to set the time zone UTC +12 for the proper display time of your zone.
For flashing TWRP 3.0.0-0 use Flashify program: Flashify (for root users) or Rashr: ®Rashr - Flash Tool. Remove from the archive file using any file manager.
Added file to Flash via recovery
In to TWRP 2.8.7.0 , too - the same bug.
You can do a zip installed by recovery?
example:
package_extract_file("recovery.img", "/dev/block/platform/msm_sdcc.1/by-name/recovery");
It is not possible?
Renix63 said:
You can do a zip installed by recovery?
example:
package_extract_file("recovery.img", "/dev/block/platform/msm_sdcc.1/by-name/recovery");
It is not possible?
Click to expand...
Click to collapse
It may be . Now do
simple use this: https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
MAXSIMUS96 said:
It may be . Now do
Click to expand...
Click to collapse
Thanks :good:
kingroot to root my Mobile S3 neo Dual GT-i9300i
is risk method ya No Risk
Bootloop any Demege
plzz suggest
Install twrp with odin. Then supersu via recovery
Inviato dal mio GT-I9301I utilizzando Tapatalk
Will this work on an i9301i? Might be helpful to clarify that.
aelfinn said:
Will this work on an i9301i? Might be helpful to clarify that.
Click to expand...
Click to collapse
this for i9300i only
MAXSIMUS96 said:
this for i9300i only
Click to expand...
Click to collapse
I have it on I9301I and works good.
Fact - I downloaded file from TWRP site.
Gt-I9300i Not Working your TWRP .My mobile root
kingroot app this root My Mobile
Ali Asgar said:
Gt-I9300i Not Working your TWRP .My mobile root
kingroot app this root My Mobile
Click to expand...
Click to collapse
Install twrp with odin!!!!
Inviato dal mio GT-I9301I utilizzando Tapatalk
after flashing with Flashify, my phone reboot and go to download mode, try to remove the batter and restart, still at the download mode, can't get in, any clue ????
*My phone is i9300I, android 4.3, Recovery: TWRP 2.7.1.0
One suggestion I have just tried out that people here might appreciate: Install official TWRP 3.0 via TWRP Manager (install from Google Play). Seems to work without a problem on my i9301i.
aelfinn said:
Will this work on an i9301i? Might be helpful to clarify that.
Click to expand...
Click to collapse
badboyblue said:
after flashing with Flashify, my phone reboot and go to download mode, try to remove the batter and restart, still at the download mode, can't get in, any clue ????
*My phone is i9300I, android 4.3, Recovery: TWRP 2.7.1.0
Click to expand...
Click to collapse
It's for 4.4.4
if I have 5.5.9 RR lollipop .....
I can update the TWRP that I have
I'm using 2.8.4.0 without fear of some brick ??????
frank1980 said:
if I have 5.5.9 RR lollipop .....
I can update the TWRP that I have
I'm using 2.8.4.0 without fear of some brick ??????
Click to expand...
Click to collapse
I had RR 5.5.8 and I flashed this version but from TWRP site - in this thread meybe is only for KK 4.4.4..
Check THIS and instal img file in TWRP is an option "flash img file" on the right bottom in menu Instal.
nalas said:
I had RR 5.5.8 and I flashed this version but from TWRP site - in this thread meybe is only for KK 4.4.4..
Check THIS and instal img file in TWRP is an option "flash img file" on the right bottom in menu Instal.
Click to expand...
Click to collapse
:good:thanks man but i have a GT I9300I neo dual sim
no have some problem??? sorry my bad english thanks
frank1980 said:
:good:thanks man but i have a GT I9300I neo dual sim
no have some problem??? sorry my bad english thanks
Click to expand...
Click to collapse
I think TWRP 3.0.0.0 works great even on I9300I .

ELITE ROM 7.1.1 V2 G611F Port For J7(2016)

Elite Roms Presenting Second 7.1.1 Port For J7 2016
FEEL FREE TO USE IT FOR PORTING ROMS
BUT DONT FORGET CREDITS
100% BASED ON STOCK INS NOUGAT FIRMWARE
Rom Info::
Based on Latest Stock INS Firmware
build:*G611FXXU1ARA8 firmware
Indian Firmware For*VoLte
Apps like Samsung Pay SecureFolder may not work Becuz you are Rooted now and voids Knox1
Features::
*No Additional Modifications Cuz its Stock Rom. But Some
Oreo Apps For Oreo Lovers
*VoLTE
*Odexed Faster Boot
*Zipaligned
*Tweaked
*More fast now
*Stock 7.1.1 Kernel
*Rooting Rom With SuperSU
*More Cant remember now <<
Download*
HERE
ELITE_7.1.1_V2_J7 2016
https://drive.google.com/file/d/1Iw7M7RI4jZJeP4Rix8wL_fGU6KRSn2oJ/view?usp=drivesdk
Credits::
@Oves786 to allow using his Elite Roms tm..
@Karthik1731..
Someone just tested???
Nice work buddy, some screen shots in the post would be really nice :good:
sandeepkumar0153 said:
Nice work buddy, some screen shots in the post would be really nice :good:
Click to expand...
Click to collapse
Its stock Rom So no ScreenShots
danish3311 said:
Someone just tested???
Click to expand...
Click to collapse
Already Tested
will works in a j710MN model, do the bluetooth woks fine? regards
Please port the ROM that is similar to ROM cocktail with multy languages
Any bugs?
My wi fi forget network passwords each time i turn it off...or simply disconnetting
Already flashed the wi fi fix with no results
jakkofeddo said:
My wi fi forget network passwords each time i turn it off...or simply disconnetting
Already flashed the wi fi fix with no results
Click to expand...
Click to collapse
This is kernel problem i think.
When i flas new kernal wifi network forgot
danish3311 said:
This is kernel problem i think.
When i flas new kernal wifi network forgot
Click to expand...
Click to collapse
I didn t flashed any new kernal...just reflashed the original one couse i need it to install magisk...
Anyway i solved editing the build.prop
Has it got call recording and net meter??? If it has i am gonna try it right now....???
luckylips said:
Has it got call recording and net meter??? If it has i am gonna try it right now....???
Click to expand...
Click to collapse
You cal install apps to do soo.
I suggest u port to oreo.
danish3311 said:
You cal install apps to do soo.
I suggest u port to oreo.
Click to expand...
Click to collapse
I am just asking if it has these two features, call recording and network traffic meter then i am gonna try. If u have or anyone has tried it then do report whether it has got these features or not.
Regards
jakkofeddo said:
I didn t flashed any new kernal...just reflashed the original one couse i need it to install magisk...
Anyway i solved editing the build.prop
Click to expand...
Click to collapse
Steps please?
aaryan45 said:
Steps please?
Click to expand...
Click to collapse
First...extract the boot.img from the Rom zip
Second...go on SU and click on the unroot button...it will reboot
Third...from recovery install the .img file
Wipe dalvic and cache (suggested)
Install magisk and reboot...
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
luckylips said:
I am just asking if it has these two features, call recording and network traffic meter then i am gonna try. If u have or anyone has tried it then do report whether it has got these features or not.
Regards
Click to expand...
Click to collapse
Here is the network meter...the recorder probably nope
The rom is very good and it does everything, the only problem I have is every time I connect the Smartphone to the PC, it restarts itself, what is the reason?

Categories

Resources