New ballistic case for the nexus 5
Full transparent case with the famous Ballistic corners
https://www.youtube.com/watch?v=qINSwLI4vY0
I had a similar (but opaque) ballistic case for my S3 that I really liked. Does anyone have this case a know if:
- it's compatible with Qi charging?
- it's compatible with any tempered glass screen protector?
Thanks.
tmagritte said:
I had a similar (but opaque) ballistic case for my S3 that I really liked. Does anyone have this case a know if:
- it's compatible with Qi charging?
- it's compatible with any tempered glass screen protector?
Thanks.
Click to expand...
Click to collapse
I have the clear version of this case. It absolutely does not interfere with qi charging. It does cause bubbles at the corners of my Spigen glas.tr nano, but I was able to solve this by shaving away a very small amount of material at the inside lip of the corners of the case with a sharp pocket knife.
This is my daily case and my favorite case that I own. I also own the SG maxx (renamed the tough jacket Maxx), the Spigen slim armor, Spigen neo hybrid, tudia wave, and the ringke fusion. By far, the jewel is the best of these cases - it feels best of all the cases above: very soft touch, smooth and grippy at the same time; the button feel is by far the nicest and most responsive.
I have heard that many clear tpu cases tend to take on a yellow tint over time, and with exposure to sunlight. I have had my jewel for about 3 months, and it has not gone yellow at all, and I often keep it mounted in my qi car mount attached to my windshield, so it is exposed to plenty of sunlight. Maybe they are using better quality tpu than other manufacturers, or maybe it is not tpu at all. I just assume that it is, although there is no mention of the material on the web site.
This is also a very protective case. The only way to get more impact protection is to use a multi layer silicone/polycarbinate case, like the SG Maxx, Trident aegis or seidio convert. I definitely think it is more protective than the Spigen, ringke and tudia cases. I have intentionally dropped the phone from 7 feet +, and thrown it against walls, without causing the slightest damage.
Finally, the thing just looks fantastic. It makes my nexus look like it is encased in clear crystal.
Sent from my Nexus 5 using Tapatalk
Is the back frosted on the inside? Or is it perfectly clear? I'm looking for a good car for a red nexus that won't make it look pink... Thanks!
Sent from my SGH-T999L using xda app-developers app
ijkl said:
Is the back frosted on the inside? Or is it perfectly clear? I'm looking for a good car for a red nexus that won't make it look pink... Thanks!
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
It is not frosted, but it does have a grid of dimples covering the whole back, that gives it visual depth. I'd guess that it would look pretty slick with a red nexus 5. These dimples are on the inside of the case, so they don't cause tactile bumps, the whole vase is very smooth.
Sent from my Nexus 5 using Tapatalk
sorry but that is one fugly looking case
Bleys43 said:
I have the clear version of this case. It absolutely does not interfere with qi charging. It does cause bubbles at the corners of my Spigen glas.tr nano, but I was able to solve this by shaving away a very small amount of material at the inside lip of the corners of the case with a sharp pocket knife.
This is my daily case and my favorite case that I own. I also own the SG maxx (renamed the tough jacket Maxx), the Spigen slim armor, Spigen neo hybrid, tudia wave, and the ringke fusion. By far, the jewel is the best of these cases - it feels best of all the cases above: very soft touch, smooth and grippy at the same time; the button feel is by far the nicest and most responsive.
I have heard that many clear tpu cases tend to take on a yellow tint over time, and with exposure to sunlight. I have had my jewel for about 3 months, and it has not gone yellow at all, and I often keep it mounted in my qi car mount attached to my windshield, so it is exposed to plenty of sunlight. Maybe they are using better quality tpu than other manufacturers, or maybe it is not tpu at all. I just assume that it is, although there is no mention of the material on the web site.
This is also a very protective case. The only way to get more impact protection is to use a multi layer silicone/polycarbinate case, like the SG Maxx, Trident aegis or seidio convert. I definitely think it is more protective than the Spigen, ringke and tudia cases. I have intentionally dropped the phone from 7 feet +, and thrown it against walls, without causing the slightest damage.
Finally, the thing just looks fantastic. It makes my nexus look like it is encased in clear crystal.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Great reply!
Huey85 said:
sorry but that is one fugly looking case
Click to expand...
Click to collapse
There is no accounting for taste.
Sent from my Nexus 5 using Tapatalk
How does this case compare to the Urbanite case in terms of size/bulk? I'd prefer an opaque case but not at the cost of too much extra bulk.
Thanks.
tmagritte said:
How does this case compare to the Urbanite case in terms of size/bulk? I'd prefer an opaque case but not at the cost of too much extra bulk.
Thanks.
Click to expand...
Click to collapse
Less bulky. The jewel is a single piece tpu case, the urbanite is a two layer case.
Sent from my Nexus 5 using Tapatalk
Huey85 said:
sorry but that is one fugly looking case
Click to expand...
Click to collapse
I absolutely agree. That case is hideous!
Maybe but i have to say I like this case more than the trident aiges and the ballistic maxx...
Bleys43 said:
It does cause bubbles at the corners of my Spigen glas.tr nano, but I was able to solve this by shaving away a very small amount of material at the inside lip of the corners of the case with a sharp pocket knife.
Click to expand...
Click to collapse
My case just arrived and it does cause bubbles at the corners of my Spigen glas-t nano. What exactly did you shave off? Any chance of getting some photos?
Thanks!
tmagritte said:
My case just arrived and it does cause bubbles at the corners of my Spigen glas-t nano. What exactly did you shave off? Any chance of getting some photos?
Thanks!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's hard to see, but I have shaved the inner lip of the corner in this picture.
Hope this helps.
Sent from my Nexus 5 using Tapatalk
I ordered one of these yesterday it should be here tomorrow according to tracking.
Sent from my Nexus 5 using xda app-developers app
Bleys43 said:
View attachment 2615722
It's hard to see, but I have shaved the inner lip of the corner in this picture.
Hope this helps.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks!
I'll give it a try on mine tonight.
I got the Diztronic, and I love it because you hardly notice it's on. People have said it's very protective, but it doesn't look like it, so I'm a little nervous. I saw the Ballistic Jewel, and what I like is that it doesn't look too bulky...except for the corners. I'm not sure how I feel about the clear, if I get it, I might have to go with the turquoise.
Does this case look better in person?
Do we have this case in matte black color, transparent seems awful ?
anyone else who has the clear version notice that its very purplish/blueish at times in different light
Sent from my Nexus 5 using xda app-developers app
edisepic said:
anyone else who has the clear version notice that its very purplish/blueish at times in different light
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yes, I've noticed that but only in some lighting conditions. I'm hoping it means the plastic formulated to prevent yellowing over time.
I've also noticed that despite ample room around the LED flash when it's turned out the base lights up. I guess that LED has quite a wide angle. When there is light behind the phone it tends to light up the frame, which is a little annoying. I'd love a hybrid version of this case with opaque black or white around the frame and a clear back, or even all opaque.
I'm rather liking this case. I was able to shave away the corners as suggested to make it fit with my spigen glass screen protector and overall it worked okay without too much visible damage due to my clumsiness...
What I have noticed, though, is the temperature of the phone (both by feel and battery temperature sensor) seems to be rather high. This is especially true when using a Qi charger. Even after the charge is finished when it should just be using occasional maintenance charging it temperature remains above 30 deg C. I'm a little worried this will affect the longevity of the battery.
Has anyone else noticed their phone warmer with this case than other cases? I'm wondering if it's too heat insulating. I'm kind of thinking about cutting out the whole back of the case and turning it into a true bumper but I have a feeling I'll completely ruin it in the attempt...
Related
Hello guys, so I recently bought a AT&T i747 SGS3 and knowing how picky I am with my electronics I started to look right away for a case.
The case must not add bulk, must offer great protection against scratches as well as the case not scratching the phone in any way, must offer camera protection and must have at least a small lip on the front.
So far I have come across these 3 which are:
Otterbox Commuter
SGP Neo Hybrid
Urban Armor Gear Case for the SGS3
As far as the otterbox commuter, I had it on my atrix 4g and loved the protection it offered but a few months later it just gets old, attracts lint on the borders and overall takes the beauty and slickness of the phone but I must mention protection was great and that is the most important feature for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The SGP Neo looks very promising offering a good quality screen protector and overall a great case all around but what has me worried is the direct contact of the TPU with the phone, specially the camera area and bezel as opposed to the otterbox which has a rubber sleeve, I had a blackberry about a year ago and the phone scratched badly on the bezel from dust getting under speck TPU case and acting as sand paper.
The Urban Armor Case seems like a very well rounded case, offering some type of rubber/soft TPU inner lining on the inside and a very tough poly-carbonate shield on the outside. What I like is that both pieces are bonded together offering a seamless design but what worries me a little is the X pattern on the inside which seems to be part of the outer hard layer which goes all the way to the top of the camera/flash/mic opening which could potentially scratch those components down the line.
Which case would you recommend and why?
Other case recommendations are welcome.
I wouldn't recommend the SGP Neo Hybrid due to the issues regarding sensitive buttons which many/most people are experiencing.
To make things harder for you, I'd also recommend looking at either the Incipio Silicrylic or the Acase Superleggera.
Edit: I also hope you realize you're in the wrong device forum (but accessories are all the same so doesn't matter)
Sent from my GT-I9300 using Tapatalk 2
I have the urban armor case and I really like it. It gives the phone a great feel in the hand and good protection from drops
Sent from my SGH-T999 using xda app-developers app
UAG, with out a doubt.
Sent from my BAKED SIII
Otterbox commuter. Feels better, looks better and UAG has horrible customer service
Sent from my SPH-L710 using xda app-developers app
Otterbox no longer attracts lint.
Otterbox is the biggest and has the most sturdy feel to it.
UAG feels really good in the hand. Less slippery than otterbox.
SGP still has button issues. It is super thin but feels as sturdy as a gel case.
The speck case is nice.
Sent from my SAMSUNG-SGH-I747 using xda premium
How about
how about using the original from Samsung called flip cover that comes especially for protecting front and back side, see the pic:
I have the same color as the pic, your SGS3 will look very nice, I promise!!!!
Dont forget the Trident Aegis
Acase Superleggera
Currently not being productive on my S3.
.
I have the UAG & Neo Hybrid, both are going back.
UAG isn't bad at all, but I'm not a fan of the stiff buttons...that being said, the Neo Hybrid buttons are atrocious. I can't believe they even released this case with all the issues I've been having.
Will probably try the commuter case next, as people seem to be having less issues with the power button.
Hey guys,
I have all three cases. Hands down the feel and the buttons go to UAG. what r u guys talking about the UAG buttons feel crappy?'honestly they feel better then any case I have ever tried for the gs3. The protection , otterbox wins this by a hair. Look goes to sgp but its very thin, buttons feel like crap and you can't buy the plastic bands seperate.. plus customer support is crappy. I love sgp ultra clear screen protectors though..
I'm just giving my honest opinion and in very anal on cases.. the gf gives me verbal treatment for buying all these cases
Thank you guys for your sincere opinions, so far I am leaning towards the UAG in white. I never drop my phones or anything and they are always over some layer of rubber or cloth when out of my pocket but I know accidents happened and that is why I need a case to at least cover it from getting scratched or dinged.
DBA Ultra Complete
wceoscar said:
Thank you guys for your sincere opinions, so far I am leaning towards the UAG in white. I never drop my phones or anything and they are always over some layer of rubber or cloth when out of my pocket but I know accidents happened and that is why I need a case to at least cover it from getting scratched or dinged.
Click to expand...
Click to collapse
I own, use, and recommend the DBA Cases Complete Ultra. It is both thin and protective. The inner piece is made of TPU, no scratching your phone. The outer piece is a flexible polycarbonate. The fit and finish are first-rate. Both sides of the phone are protected when resting on a flat surface.
RebDovid said:
I own, use, and recommend the DBA Cases Complete Ultra. It is both thin and protective. The inner piece is made of TPU, no scratching your phone. The outer piece is a flexible polycarbonate. The fit and finish are first-rate. Both sides of the phone are protected when resting on a flat surface.
Click to expand...
Click to collapse
I've been thinking about getting one of those cases but I was wondering what kind of drop protection this case offers
Sent from my SGH-T999 using xda app-developers app
Look at some reviews for the Incipio SILICRYLIC DualPro. I don't own it yet but it looks promising.
Sent from my GT-I9300
lolhard123 said:
Look at some reviews for the Incipio SILICRYLIC DualPro. I don't own it yet but it looks promising.
Sent from my GT-I9300
Click to expand...
Click to collapse
The Acase one is pretty nice for a dual layer one. It's what I use.
Godwarrior1 said:
how about using the original from Samsung called flip cover that comes especially for protecting front and back side, see the pic:
I have the same color as the pic, your SGS3 will look very nice, I promise!!!!
Click to expand...
Click to collapse
i have this case and the otter box (defender and commuter)
i like the defender because it has a protective screen the protects the entire front screen... the bad, obviously the size.
I like the commuter because it doesn't bulk up the phone that much, a bit slipper though at the back.
the original front flip case looks the best... but offers the least protection
Get the Commuter case! It's add a little bit bulky but the protection was MAX! I did few drop test in front of my friends to show off. It's drop from about 1.2 meter height and the case and phone survive it. I would recommend UAG case due to special design..^^
Commuter = Max protection + Keep the round shape of the phone
UAG = Less protection than Commuter + Makes your phone a bit square + nice design & less slippery.
Final decision still yours. Both case almost at the same price(UAG at Amazon.com, now only 21.99!!). Grab one of this and you will not regret for it. If not, grab both cases..xD
---------- Post added at 02:25 PM ---------- Previous post was at 02:20 PM ----------
Godwarrior1 said:
how about using the original from Samsung called flip cover that comes especially for protecting front and back side, see the pic:
I have the same color as the pic, your SGS3 will look very nice, I promise!!!!
Click to expand...
Click to collapse
My sister grab this case also. :laugh: Nice looking in the begining but after few months of use, the side of the flip cover start peeling off. Now she is using Non-Genuine SGP Neo Hybrid case only $6.
falcons2 said:
I've been thinking about getting one of those cases but I was wondering what kind of drop protection this case offers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'm waiting for mine to get here, just ordered one myself. As for drop protection, I would assume it offers as much protection as the spg or uag cases, if not more. There's a DBA thread where there is a picture of the outer plastic part of the case being bent almost in half and it still doesn't break so it's got to be pretty tough. The otterbox is pretty much max protection as far as drops go but it is also bulkier than any of the others mentioned.
This is a review of Cruzerlite TPU cases designed for N2: http://www.cruzerlite.com/cases/samsung/galaxy-note-ii?limit=30
Cruzerlite is probably one of those case companies that doesn't need much introduction. Although being around for a few years, they already established themselves with a series of unique TPU cases and a fanbase of loyal customers. For me this was the first time I got a chance to test these cases. One might say what so special about another TPU case? When it comes to Cruzerlite it's their Personality. These cases have unique design, often centered around Andy the Android character. But looks will only take you so far without actual quality behind it. So here is how it stacks up.
First case I looked at is called Andy Circuit Persona. It has a very unique printed design of Android character surrounded by electronic circuit traces. The print itself looks very durable and embedded into the case coating which feels scratch resistant, something you can count on staying bold and visible for a long time throughout wear and tear. The case itself, surprisingly, made out of a very durable thick TPU material which actually feels like it will be able to absorb a noticeable shock if dropped. Sides of the case snugly wrap around the phone and provide a nice lip to keep your display off the surface if placed screen down. Outside the case has a very smooth texture with a nice grip that feels secure in your hand. All the cutouts are precise and perfectly aligned. Also, power/volume buttons are exposed through a cutout and easily accessible. Typically I would not recommend TPU case as something that can give you a piece of mind if you drop the phone, but this one is an exception and I feel like it will give you a little more confidence if dropped.
The second case is from their Androidified Case series which is a specific Bugdroid Circuit model. This one features Andy the Android in the middle surrounded by etched out traces of electric circuit. This is a very unique design because you can actually feel etched out traces both outside and inside of this TPU case. The case itself is semi-transparent and feels great in your hand with an extra grip due to the etched out lines. Just like Andy Circuit Persona, it wraps around the phone, providing an acceptable lip to protect the screen from touching the surface when placed display down, and has all the precisely aligned port openings. Power and Volume buttons have cutouts for easy access. I would say Andy Circuit Persona will offer a better shock protection, but this one is still not bad and should provide you with a decent grip to avoid dropping your phone and some protection in case if you drop it. Also, both cases are smooth enough to get in and out of the pocket easily without pulling on any material.
Overall these are very nice looking TPU cases for everyday basic use. Of course what makes them stand out is the original design with its friendly Andy the Android in the middle. Also, cases have a very reasonable price without sacrificing the quality. For those who like to change their N2 cases on a regular basis and looking for a unique design, Cruzerlite line of TPU cases is definitely something to consider.
Now, here are the pictures for your enjoyment:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OK, so this was totally unexpected. Cruzerlite is well known for their cool TPU cases with Persona of Andy "the android" character. But do you guys know they have a line of plushies, the collectible Andy plushy toys?!? http://www.amazon.com/s/ref=nb_sb_s...rlite+plushies&sprefix=cruzerlite+plu,aps,168
I just got one for review, and this thing is super cute. At first I thought to give it to my kids, but then I realized I want to keep it for myself. This one is Persona of Andy with a clear belly to put your Jelly Beans (get it?) in there http://www.amazon.com/Cruzelite-Personas-Andy-Jelly-Collectible/dp/B008GQ1OCI/
Here are some pictures of this cool Cruzerlite collectible toy:
Those cases look pretty cool. Green one would be my choice. Wow didnt know they made plush Andy character. I must order some now. Thanks for the awesome review as always.
Sent from my SPH-L900 using Tapatalk 4 Beta
I forgot to mention it's actually of a decent quality, not some cheap toy you get in a dollar store.
vectron said:
I forgot to mention it's actually of a decent quality, not some cheap toy you get in a dollar store.
Click to expand...
Click to collapse
Even better!
Sent from my SPH-L900 using Tapatalk 4 Beta
I have one of these cases minimal protection. But decent. Doesn't add bulk.
Sent from my SAMSUNG-SGH-I317
I order this one off there site XDA developer case...
Sent from my SPH-L900 using xda premium
Thats cool do they have it in black?
Sent from my SAMSUNG-SGH-I317
I was thinking about getting one of these. I always switch between my cases but the only I have that is really thin on the sides is the seidio surface and it's boring looking.
Are these cases smooth? Do they grab at your pocket when you take them out?
And are they super thin on the sides? The only time I can actually reach each side of the screen with my thumb is if I have my phone in the surface or naked.
Sent from my SCH-I605 using xda premium
Very nice slim tpu case.... but I couldn't use mine (Androdified) becaise it lifts the corners of my screen protector. So if you have a flush to the edge type of screen protector and you are not willing to cut or change it go with body glove tpu. Alnost the same thin design but the corner has more room to fit with sp. Of course its a boring solid color
joshm.1219 said:
I was thinking about getting one of these. I always switch between my cases but the only I have that is really thin on the sides is the seidio surface and it's boring looking.
Are these cases smooth? Do they grab at your pocket when you take them out?
And are they super thin on the sides? The only time I can actually reach each side of the screen with my thumb is if I have my phone in the surface or naked.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
They are smooth, not sticky, and relatively thin on the side.
Thanks for the review and pictures!! I've got 3 of their Androidified TPU Cases for my Evo LTEs. The smoke color looks really nice, the red color looks awesome (looks good on my black one, but really stellar on my white one!), and the clear was great for about 1 month. Around that 1 month mark though, the clear started yellowing and will NOT come clean no matter how I try to clean it!! It's so bad I won't even use it on either my black or white Evo LTE! I think I'm gonna go ahead an try one of their TPU cases for my Note 2. I always buy WAY too many cases for every phone I get, and always say I'm not going to for my next phone but always do, lol. Anyways, thanks again for the review and pictures!!
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
Thanks
vectron said:
This is a review of Cruzerlite TPU cases designed for N2:
Cruzerlite is probably one of those case companies that doesn't need much introduction. Although being around for a few years, they already established themselves with a series of unique TPU cases and a fanbase of loyal customers. For me this was the first time I got a chance to test these cases. One might say what so special about another TPU case? When it comes to Cruzerlite it's their Personality. These cases have unique design, often centered around Andy the Android character. But looks will only take you so far without actual quality behind it. So here is how it stacks up.
Thanks for the great review.
Click to expand...
Click to collapse
I have this case on my Note 2 (a red version) and I have some observations:
The cutouts are large -- meaning I can use my Samsung MHL-HDMI adapter without taking the case off. This is the only case so far I have tried that can do this. (Also used a Diztronic and stock Samsung case.)
The cutout on the headphone jack is a good size too and most cables plug in without issue.
The lip around the screen is quite large ..... this is good and bad. Good in that is will offer a lot of protection for face down drops.It is stiff and won't push off the screen easily. It also goes above the glass over 1mm I would say. (I had the Samsung case on my phone and it fell screen down, smashing the screen. The Samsung case has a very thin lip around the screen.) The bad is that it makes it slightly hard to swipe in from the left of right ... or get your finger to the far edge of the screen while cropping pictures.
You can feel the seams in the TPU from the manufacturing process...... it goes around the outside edge of the phone. The Diztronic TPU case is much better in this respect.... but the Diztronic offers less front glass protection .. and the cutouts aren't as big so you have to take the case off to use the MHL-HDMI adapter.
Just buy it. You will get the great case and support for the xda team.
Sent from my GT-N7100 using xda app-developers app
The cases with Andy on the back are slightly thicker and more protective.
Ridin' a Note 2 blast
Looks awesome. Just need one to fit my ZL battery!
Sent from my SAMSUNG-SGH-I317 using xda premium
Does anyone has the cyan/light blue one?
Does it looks good on grey Note 2?
I'm sooo interested in that color!
This is a review of UAG case for S4: http://www.urbanarmorgear.com/collections/samsung-galaxy-s4/
I hope other vendors received the memo: UAG finally shipping their S4 cases. Competition is over. Go home! Yes, it's true, just received my Navigator (white) and Scout (black) S4 cases, while Aero (blue) and Outland (rustic) colors are also available. For the last 6 months using it on my Note 2, this has been my go-to case whenever I'm using stock battery. I do have a lot of great cases in my collection, but this case has always been at the top of the food chain for me when it comes to overall protection, durability, and functionality while still being slim and sexy with it's unique industrial design. It also withstand test of time still looking like brand new after a lot of abuse, and that's considering my Note 2 UAG case is white Navigator.
With S4 case, UAG went back to their original design from S3 rather than new "vent" design introduced with larger cases of Note 2 and iPad Mini. This makes perfect sense since we are talking about a smaller footprint phone in comparison to other phablet and tablet. The design is still high quality feather-lite composite construction made out of single piece thermo-plastic material used for inner lining and edge protection and also polycarbonate shell for a tough exterior protection. The combination of honeycomb pattern partial inner lining of the back and unique raised shaped of pc shell in the middle works as a perfect shock absorption if you drop the phone. The edge protection with a thicker bumper around top/bottom of the phone wraps the screen with a nice lip around the front of the phone keeping it save off the surface if you place it screen down or if you drop it by accident. The phone will not slide on any surface, either if you place it face up or down. As I mentioned, front bumper will protect it from sliding face down, while the top/bottom bumper has small standoff skid pads on the back to keep the friction when you place the phone face up. The back of the phone is complimented with industrial design grooves accompanied by fake rubbery torx screw accents. The case itself has a very secure and comfortable grip, and still very easy to slide in/out of the pocket or purse.
Every cutout is precise and generous. You can especially see it in micro-usb and headphone port openings that will accommodate any reasonably over sized connector. Camera and flash openings are partitioned to make sure you photos come out glare free. Special attention was given to power and volume buttons that cover original phone buttons. Those look and feel very hardware like and because of small slit on a side, they are easy to press and very responsive. In addition to the case, you also get a bonus screen protector and microfiber cleaning cloth. I can't comment on the quality of screen protector since I didn't install it (I have a display model of S4), but in my hand it felt thicker than cheap ebay screen protectors.
Dimensions of UAG S4 case per my measurements:
Weight: 1.1oz -> 30g
Length: 5.5in -> 138.7mm
Width: 2.9in -> 72.8mm
Thickness: 0.48in -> 12.3mm
Overall, I would consider this one of the top contenders if you are looking for a slim and lightweight case with a really good drop protection, convincing lip bumper, and unique eye catching design. Now, let the pictures do the rest of the talking:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the pics! Nice case
Sent from my SGH-M919 using xda premium
so tell me;
how pocketable is this case ?
that black rubber looks
1) like it can pull off easily
2) stretch easily
3) has a sort of.. 'stickiness' to it (lint magnet)
wavrunrx said:
so tell me;
how pocketable is this case ?
that black rubber looks
1) like it can pull off easily
2) stretch easily
3) has a sort of.. 'stickiness' to it (lint magnet)
Click to expand...
Click to collapse
NO pull (just a bit around volume button and usb/speaker ports because its thinner rubber), NO stretch, NO stickiness. This is not silicone rubber typical for Seidio and other cases. This is more in line with smooth TPU material. This S4 case is identical to S3 case. You don't have to take my word for it, go to Amazon and see 4.75 star rating (for S3) out of 1,831 reviews. This is simply the top case!
How thick is the phone with case? in mm or inches.
Gah stuck between this and the neo hybrid now Haha. I love the look of the outland one.
Sent from my SGH-I337M using xda app-developers app
wow and the case addiction starts lol ordered!! that's gorgeous
Sent from my iPad using Tapatalk HD
If it drop face down will screen broke
Sent from my SGH-M919 using Tapatalk 2
Nice review....and awesome pics...
Although I must say that this case looks like itll protect a tank...its way too ugly ...this is just my opinion, I'll think ill still stick between slimcase and otterbox
ugly really? I think it's a sexy biatch
Sent from my iPad using Tapatalk HD
Beauty is in the eye of the beholder Telling this from a personal experience, it's 100% guarantee people will ask you about and will compliment you on your UAG case.
Btw, dimensions of UAG S4 case per my measurements:
Weight: 1.1oz -> 30g
Length: 5.5in -> 138.7mm
Width: 2.9in -> 72.8mm
Thickness: 0.48in -> 12.3mm
Regarding dropping face down. Any case dropped face down on uneven surface will have a problem if screen will come in contact. I have tempered glass on my N2 and will never go without it on any of my phones. That is the best way to absorb the shock if your screen comes in direct contact with outside object. Dropping your phone on a concrete or tiles or hardwood floor face down with UAG will protect the screen because you have a bumper lip to keep it away from direct contact. I took close up in my pictures to show it, and you can compare it with other phones I have reviewed (check the link in my signature).
a buddy of mine introduced this case to me a few weeks back on his (iphone) it looked soooo sexy i am definitely getting this for my s4
thanks for the review and pics :good:
I have this case for the iPhone 5 and its AWESOME!! Im pretty sure will go with this when I get my GS4. OP Thanks for thread/review and pictures are pure sex!!
How is the grip on this? Ive always used tpu cases so I worry that it will be too slick for me with the hard outter case
Sent from my cm_tenderloin using Tapatalk 2
chaos254 said:
How is the grip on this? Ive always used tpu cases so I worry that it will be too slick for me with the hard outter case
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Between matte finish outer hard plastic PC (non-slippery textured design) and smooth TPU sides (those will NOT stick to your pockets!!!) - its a perfect grip. It's easy in and out of the pocket, don't grab your inner pocket, and yet still gives you a decent hand grip. I'm not saying this is the ONLY case to get, there are a lot of other great cases as well. But this one is definitely at the top of the selection.
Really ??? Crap...I ordered some Chinese copy since I thought uag cases Wouldn't be out until next month. ...I'm so afraid of my phone breaking.
Well. .. next month I'll order one. ..
Sent from my GT-I9505 using xda premium
I had this case for my S3 and I loved it. But for mt S4, it's Neo Hybrid all day
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
tntgdh said:
Really ??? Crap...I ordered some Chinese copy since I thought uag cases Wouldn't be out until next month. ...I'm so afraid of my phone breaking.
Well. .. next month I'll order one. ..
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
That's how it is with any new phone, you get a cheap case from ebay to hold you over while you take your time to research and to pick a better quality case. And when you will finally pick that perfect case, you will decide to get an extended double or triple capacity battery and have to use an ugly case with it or mod another another ugly case to fit it lol!!!
Oh yeah...I actually had an uag for my gs3.... simply the best case I ever had.
The peace of mind it gave is priceless. ..
so I can not think in another car but uag.
Here is the outland also known as the orange case.
Sent from my SAMSUNG-SGH-I337 using xda premium
So I just got he Diztronic Case for my new Nexus 5 today and here's my thoughts on it. I've been a Diztronic case user for sometime now; had it on previous devices such as my S3. One thing I love about Diztronic is that they are more substance than flash when it comes to their cases.
Packaging:
One thing you will notice when you get the packaging is that, well there isn't much to say as its in a plastic wrap, with a cardboard cutout placeholder for your phone. They spent the money were it needs to go; on the case itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Build Quality/Design
As expected from Diztronic, the case is a built top notch using a soft but firm flexible TPU material. It has a two tone appearance where the edge/frame is a shiny glossy black (along with the Diztronic logo on the back) where the rest of the case is a soft grippy matte black on the back and sides. A thing to point out is the nice feel the matte finish has. It almost feels like the Nexus 5 back without a case. It just feels good. One thing I like is that Diztronic did not plaster their name all over the case like some case manufacturers do. Just one simply logo at the back near the bottom.
The cutouts are all in the perfect location and aligned right. The cutouts for all ports/mics/speakers are spot on. One thing I would like to point out is the cutout for the headphone jack. It's bigger than other cases I've seen and I like that. It allows for headphone plugs off varying sizes to be used with our phone. Many times a plug will be too big to be used with certain cases and the phone would have to removed from the case to use said plug. The cutout is a large nice square cutout. So thumbs up to Diztronic for that. Also, the microusb port cutout is large also, allowing for oem and aftermarket micro usb plugs to be used. Which is really like as I have plugs and charges of all sorts of sizes around the house, bag and car.
One thing that did differ from the S3 Diztronic case is that there is no cutouts for the buttons; volume and power. I'm sure a lot of us went the super cheap route before and got a tpu case off of ebay with no cutouts and it was just plain misery trying to press the buttons. That was one of the big pluses for me on the S3 case and was doubtful and wary about no cutouts on the Nexus 5 case. Yet, Diztronic has pulled through and made pressing the buttons easy and nice even without the cutouts. The fake buttons on the case to mimic the buttons on the phone are very nicely designed and implemented. They actually look and feel like real buttons and not just some bump on the case like the cheaper tpu cases.
Another thing I liked is that the edges are raised to protect the phone if you place it face down on the table. So no scratching the screen when doing so.
Also, unlike the slim cases from Spigen and Ringke (other cases I considered) is that it has decent protection all the way around the phone. The slim cases protect the sides but not so much the top and bottom. Sure its a little bulkier and thicker but my mind is a little more at ease with the added protection.
Got the same case on my N5 as well. Had one on my EVO 4G LTE as well. Decent case all around. Nice review.
johnny15 said:
Got the same case on my N5 as well. Had one on my EVO 4G LTE as well. Decent case all around. Nice review.
Click to expand...
Click to collapse
Thanks I appreciate it!
Yeah one of the better cases I've used on any device. Great customer support too, anytime I had an issue they always were quick and courteous.
Thanks for the review. My phone slipped out of my hand today and I was able to catch it with my foot before it fell the rest of the approx. 6 inches to a tile floor. The back cover popped open a little bit, but it was otherwise unscathed. I took that as my first and only warning from the phone Gods to put a case on it so I just bought one of these based on your review.
ComposMentis said:
Thanks for the review. My phone slipped out of my hand today and I was able to catch it with my foot before it fell the rest of the approx. 6 inches to a tile floor. The back cover popped open a little bit, but it was otherwise unscathed. I took that as my first and only warning from the phone Gods to put a case on it so I just bought one of these based on your review.
Click to expand...
Click to collapse
yeah I always recommend a case. I don't like otter boxes or tank sized cases but I do like a medium between super slim and otterbox. I'm sure you'll like the case!
How much of the screen does the edge/lip of the case cover? Any use this with a screen protector?
Covers very little of the screen. I am using with with the spigen ultra crystal with no problems. I think it's a much more functional case than the official bumper.
Sent from my Nexus 5 using Tapatalk
Yeah, if you can't tell my phone has a screen protector on it. I'm using the xtremeguard protector on it
Sent from my Nexus 5 using Tapatalk
Does anyone have any pictures of this case (either black or clear, both would be nice though) on a white Nexus 5? Looking to purchase this case just not sure in which color
funky_snowman said:
Covers very little of the screen. I am using with with the spigen ultra crystal with no problems. I think it's a much more functional case than the official bumper.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
The skinomi screen protector I got has 1mm margin to the edge of the screen so any case lip that covers more than 1mm will start to push on the protector.
Would you say the it covers 1mm or less of the screen?
Yes, I think that's accurate
Sent from my Nexus 5 using Tapatalk
Does this case feels like the soft black of the phone? How is it with fingerprints?
Sent from my Nexus 5 using Tapatalk
Momotani-Hitoshi said:
The skinomi screen protector I got has 1mm margin to the edge of the screen so any case lip that covers more than 1mm will start to push on the protector.
Would you say the it covers 1mm or less of the screen?
Click to expand...
Click to collapse
I'm curious as well about the case pushing against the screen protector. I would like to know if the case causes the screen protector to lift away from the screen. This is a problem I have with the spigen.
Thanks
Amazon has the black with prime shipping, I'll make sure to post my thoughts
Sent from my Nexus 10 using xda app-developers app
Looks like you lucked out and got the second revision, seems like a lottery at Amazon right now but good to see they started shipping them. Nice big photos and thanks for taking the time. I personally decided to pass on Diz this time due to the QC issues and covered up buttons.
FYI there's a thread a few pages long dedicated to the progression of this case including other pics and reviews: http://forum.xda-developers.com/showthread.php?t=2490294 :good:
After using a spigen neo hybrid for a few days I've gone back to the diztronic, fits like a glove. And almost feels like there's no case.
Sent from my Nexus 5 using xda app-developers app
Is it hard to take off? I've read that some people actually damaged the exterior back and edges by taking off their cases...
No its not hard to take off... I don't go side to side... I go from bottom to top. So insert the bottom of the phone first then the top. Yeah i was worried about the revisions but Diztronic emailed me that all new cases should be the revised version
Sent from my Nexus 5 using Tapatalk
Sucks that from Italy apparently there is no way to get my hands on one since no euro amazon sells it and they directly also dont mail it to Italy or other european countries....
krash183 said:
No its not hard to take off... I don't go side to side... I go from bottom to top. So insert the bottom of the phone first then the top. Yeah i was worried about the revisions but Diztronic emailed me that all new cases should be the revised version
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Have you tried eBay through the seller "post3rs" ?
Sent from my Nexus 5 using xda app-developers app
http://www.amazon.com/Diztronic-Voy...=1390682220&sr=8-6&keywords=diztronic+nexus+5
Review of the Older Diztronic Case for comparison - http://forum.xda-developers.com/showthread.php?t=2538730
Review over @ amazon http://www.amazon.com/review/R1Q1QSBFIEBWHX/ref=cm_cr_rdp_perm - Please click "yes" on the "Did you find this review helpful" at the bottom of it please! - Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Packaging:
As per Diztronic Style, the packaging is minimalistic. Simple and easy to open. It's nice to not to see money isn't going for flash of presentation but towards substance to the actual product.
Build Quality/Design
Once again, Diztronic opted for a two tone style; where the majority is this nice soft matte finish with accents of glossy black. It's designed very tastefully. The gloss accents flows well with the matte finish and is seemless in its presentation. The front bezel/frame is glossy and the rest is almost entirely matte black. One very nice touch I'd like to point out, the "buttons" are matte but are outlined with the gloss finish border. It made the buttons "pop" out more and was just very visually appealing imo. Also, the cutout for the camera is outlined in the gloss finish to breakup the dominating matte finish on the back. The biggest difference between the this case and the older one would be the back, it has a "window" showing the nexus logo. There is a plastic film protector that I didn't remove when taking the pictures but its a nice clear sturdy plastic. Last; the Diztronic logo was moved from the back to the side at the bottom right (also in the Gloss finish). Very nice job Diztronic, the style of the case flows very well that isn't too dull and boring but a nice blend of aesthetic cues and functionality.
Also, the "frame" around the edges of the phone isn't the same all the way around. The corners have more plastic to be able to endure harder drops. It's not blatantly obvious but noticeable under close inspection . See pictures to see the "bumper" corners. The back also has very small rubber feet when laying the phone down on its back. I believe its to prevent too many scratches on the clear plastic window. Like the last version, the front border is lifted so the screen isn't touching the table when placed faced down.
As like the last case, the "buttons" on the case are the nicest feeling and looking buttons I've come across on any tpu case. They looks and feel like actual buttons. Pressing them is easy and works like pressing the real buttons on the Nexus 5 itself.
All cutouts are placed/cut correctly with everything lining up just fine. The cutouts for ports are big enough for the use of mostly any usb cable or headphone plug. The fit is pretty much perfect, the plastic isn't too stiff where its impossible to the get phone in the case but not too soft where it feels cheap. When in the case the Nexus 5 seems solid in hand w/ a good weight to it. It's what I look for in the compromise between slimness and protection in a case.
Conclusion
This is my new favorite case for the Nexus 5. It's a solid performer for a good price! Diztronic has hit another homerun with this case.
nice review....
now waiting for my case to arrive,...
Very nice, detailed review.
Great case indeed.
Thanks!
Sent from my Nexus 5 using Tapatalk
Great review! Waiting for mine to arrive on Monday.
Sent from my Nexus 5 using Tapatalk
Thanks for the great review.
Mine should be here any day now.
How does it feel compared to the Neo Hybrid from Spigen?
Sent from my Nexus 5 using Tapatalk
nexicon said:
How does it feel compared to the Neo Hybrid from Spigen?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
i dont have that case
nexicon said:
How does it feel compared to the Neo Hybrid from Spigen?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It feels slimmer and more ridgid, the finish makes it easier to hold and, because of the reinforced backing, feels much sturdier. I have the Neo Hybrid and the Voyeur is better in almost every way. Diztronic really hit it out of the park with this one.
Also, while I've been a critic of the glossy lip, it's much less pronounced on the Voyeur than it is on the standard matte case, and that's a major plus for me. I will say however that my buttons, while tactile, aren't as tactile as the OP's. Granted, there is a break-in period on TPU cases (especially the buttons), so I'll report back in a few days.
Buy this case.
I see that you have both diztronic cases, between both which do you think has more button feedback? I have the original one, waiting on my Voyeur :laugh: and thanks for the review!
Hmm, I'm not sure I like the circular glass shape on the back.
The way it exposes the logo through glass isn't very appealing to me.
th3xeroeagle said:
I see that you have both diztronic cases, between both which do you think has more button feedback? I have the original one, waiting on my Voyeur :laugh: and thanks for the review!
Click to expand...
Click to collapse
I have both as well, just from my experience, the Voyeur has better buttons than the original.
Luther. said:
Hmm, I'm not sure I like the circular glass shape on the back.
The way it exposes the logo through glass isn't very appealing to me.
Click to expand...
Click to collapse
You're not the only one, Diztronic is looking into possibly removing it on its next revision or, I think its next case. Not sure.
I wonder if it's possible to make a thin case like the spigen ultra slim but with a clear black to expose the logo
Sent from my Nexus 7 using xda app-developers app
BTT8 said:
I wonder if it's possible to make a thin case like the spigen ultra slim but with a clear black to expose the logo
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
it's be easier just to have a clear slim case would it not?
Thanks for the review, I ordered one!
One quick question, is the clear plastic much more see through once the protective layer of film is removed?
Sent from my Nexus 5 using Tapatalk
krash183 said:
it's be easier just to have a clear slim case would it not?
Click to expand...
Click to collapse
The problem with that is smudges showing up with black devices.
Spigen Crystal Shell:
http://www.amazon.com/PROTECTION-Spigen-Crystal-JAPANESE-Protector/dp/B00G6SE0O2
Review:
http://www.youtube.com/watch?v=3SLhEdlGdQ8
Luther. said:
Hmm, I'm not sure I like the circular glass shape on the back.
The way it exposes the logo through glass isn't very appealing to me.
Click to expand...
Click to collapse
I bought this simply because it exposes the logo.
con4n007 said:
I bought this simply because it exposes the logo.
Click to expand...
Click to collapse
nice
Luther. said:
Hmm, I'm not sure I like the circular glass shape on the back.
The way it exposes the logo through glass isn't very appealing to me.
Click to expand...
Click to collapse
You do know there's the original matte black case that doesn't has the see through glass behind right?
The whole point of the voyeur was to show off the Nexus logo.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Deevious88 said:
The problem with that is smudges showing up with black devices.
Spigen Crystal Shell:
http://www.amazon.com/PROTECTION-Spigen-Crystal-JAPANESE-Protector/dp/B00G6SE0O2
Review:
http://www.youtube.com/watch?v=3SLhEdlGdQ8
Click to expand...
Click to collapse
i dont know what to tell you, cant please em all
spicydicy said:
Thanks for the review, I ordered one!
One quick question, is the clear plastic much more see through once the protective layer of film is removed?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
i dont know if its "much" more but its definitely clearer. It had 3 pieces of film on it, 2 on the outside and 1 inside.