I'm a newbie. I hope build some roms for my Ascend P6.
I using the kitchen tools at github.com/dsixda/Android-Kitchen
But, this tool is too old.
1. When I using it to unpack the P6's UPDATE.APP, it cloud not working.
I find a newer script, replace the split_updata.pl .
2. At last, I pack the rom to *.zip, send it to my phone, when I install it at TWRP recovery, TWRP can not read the zip. The error message is: "Error executing updater binary in zip."
My TWRP version is 2.6.3.3.
Hi, guys, what tools you using for build roms for Ascend P6? Tell me?
I want to port AOSP for my p6-u06. And I also dont know how to Port for it.
Sent from my P6-U06 using XDA Premium 4 mobile app
up.
Gentle push up, really anxious to know.
Related
Hello,
i want to try cynagenmod on my phone on which i read stuff on developers column.
There was a post by free xperia project. Im following there steps , but cant get past :Step 2 - flash new kernel (always use the kernel provided in CM7 / it is incompatible with stock ROM)
ON PC - run flash_kernel.cmd (an black window will open and will stay open untill kernel is flashed)".
Can somebody please explain me how do i run flash_kernel.cmd? i only got boot.img and CM7 firmware in the package. Please tell me proper commands.. noob here
I flashed it through fastboot..
Sent from my R800x using Tapatalk
But how....wits the correct procedure ??
Sent from my R800i using XDA App
DISCLAIMER: I ACCEPT NO RESPONSIBILITY WHATSOEVER IF YOU BRICK YOUR PHONE USING THIS METHOD. THE INFORMATION SHARED FOR HELPING THOSE HELP THEMSELVES. MADE ONLY FOR THE XDA PRINCIPLE OF "SHARING KNOWLEDGE"
Everyone is requested not to post unnecessary questions. I am making the OP very clear so you need no further assitance. Critics will be ignored and use of foul language and ungrateful words will be reported.
I am making this thread so as to save all the troublesome steps in making a flashable ROM and risk of bricking due to mistakes.The ROM is made following the instructions from @somboons thread I have made this ROM by myself using G2 kdz extractor which is also available in a thread in xda. The Kernel and the Baseband is made by @savoca and our dear @Cloudyfa for that we must thank them and give credit to them for that fine work.
Thanks to @Jeevandon92 for uploading the flashable 20b zip file
UPDATE -20B KK ROM FOR 802-32GB AND 16GB VERSIONS.
This is the latest Kitkat updated 20B ROM flashable on G2 802.
Rom(20B):
https://mega.co.nz/#!ts40zQyD!RdUSXCK3IMfKdpDriWh9kVX3aENsrxiMu5UQge7FacM
Baseband:
https://mega.co.nz/#!oURgCIha!-YJrFCqrLcGNILJjMUpWdcN1HnMrA2l9KvSEDtcIohM
Kernel:
https://mega.co.nz/#!9RBHGbIT!lHCCYGNB6EhLC0EOrweD4L395_f50gyIUJ4Up9VhI3s
IMP: YOU MUST FLASH THE FOLLOWING KERNEL FOR THIS ROM TO GET THE KNOCK CODE FULLY WORKING [thanks @Cloudyfa again for this]
Supersu:
https://mega.co.nz/#!MdQWBKIa!_xbY0diZfHEX3o4V3p_r-bDQbHrCoBAlF6jTNVONCEI
IMPORTANT: Install Busybox from Playstore so that you have a completly working root.
USE TWRP 2.7.0.0 FOR BEST RESULTS....OTHER FLASHING INSTRUCTIONS REMAIN THE SAME AS MENTIONED HEREIN BELOW
THIS ROM HAS FOLLOWING ADVANTAGES:
---KNOCK CODE FULLY WORKING(NEEDS KERNEL AS PROVIDED IN LINK ABOVE)
---TERRIFIC BATTERY BACKUP( I GET 2 FULL DAYS WITH 15% REMAINING)
--- NO MORE BLUETOOTH DRAINING BATTERY (FIXED FOR GOOD)
----AMAZING RAM MANAGEMENT(NOTICABLY 40-50% BETTER RAM MANAGEMENT- I HAVE ALMOST 1GB RAM FREE AT ALL TIMES AFTER DEBLOATING) [/I][/B][/COLOR][/FONT]
PREVIOUS RELEASE
Rom(20A):
https://mega.co.nz/#!TVJV0ajT!fnc1Kfjc7lgBn3jZZ2ukUHFE62EuW9-kgrCECwc1RJk
Baseband:
https://mega.co.nz/#!SBgnRaBT!TnRG7vvk9D7rLZfMatHDZX0zcyivtCo1vAbUoZFFHtQ
Kernel:
https://mega.co.nz/#!2YxVHRJJ!mKFBFJOEZofn-cAjX90RIa5IQOfsi9EUKT05GQmyIK8
Supersu:
https://mega.co.nz/#!SJx0VKbK!Nt3c1XxSzPCmZjijpTnGXPdJExzEfDZ6tSLCf3VQsVc
Requirements:
-A rooted G2 on JB 4.2.2 stock rom.
-Recovery installed : atleast TWRP 2.6.3.3 installed.http://forum.xda-developers.com/showthread.php?t=2472223
-PATIENCE
Please follow the instructions as below for a perfectly rooted Stock Kitkat with Recovery. If you do not follow the instructions, things will go wrong and you may have bricked your G2. Then you would have to flash kdz to restore back your phone.
FOLLOW THE STEPS AND YOU ARE FINE WITH A PERFECT ROOTED KK ROM WITH RECOVERY:-
> DOWNLOAD THE FILES FROM MY FOLDER ON MEGA.
> BACKUP ALL DATA AND INFORMATION, PREFERABLY A NANDROID BACKUP, JUST IN CASE.
1. Copy all the files downloaded from my Mega account to your SD card.
2. Reboot into TWRP recovery.
3. Perform an Advance wipe to wipe: Dalvik,Cache,Data & System. Do not wipe Internal Storage under any circumstances.
4. Flash in following Order one after another, dont boot or wipe in between:
ROM---- BaseBand---- Kernel----SuperSU
5. Wipe Cache/Dalvik (This option is displayed on TWRP after successful flashing)
6. Reboot and,
7. Enjoy KK stock rooted with recovery.
IMPORTANT: Install Busybox from Playstore so that you have a completly working root.
I have tried to give credit to all I am aware of. If you feel you deserve credit for any of your contributions PM me and I will acknowledge. Thank you.
I hope this thread helps everyone looking for rooted kitkat....It takes a negligible effort to press Thanks if this thread helped you or educated you.:good:
Use twrp 2.7.0.0. FOR BEST RESULTS
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
Use twrp 2.6.3.3 only. Other recovery may not work
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hate to ask but Can we have one for the d803 and i will test it. Its been released a few days ago
If we flash this, does it allow for OTA updates from LG (if/when there are some) or does this 'disqualify' the ROM? Just interested in seeing stock again some day, I get lots of different wants, side effect from the mass dosage of pain meds for severe chronic pain hah.
Thanks for any questions answered.
Sent from my Nexus 7 using Tapatalk
You will get OTA BUT since you would be rooted with custom recovery it will bootloop. I suggest flash and wait. Xda will surely have someone posting any updates. I will make flash able zip rhen which you can use later
Sent from my LG-D802 using XDA Premium 4 mobile app
malek777 said:
Hate to ask but Can we have one for the d803 and i will test it. Its been released a few days ago
Click to expand...
Click to collapse
If i get the kdz file i will make one for you. I don't have the 803
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
If i get the kdz file i will make one for you. I don't have the 803
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW057495432109876543213/D803R20D_00.kdz
---------- Post added at 06:13 AM ---------- Previous post was at 05:41 AM ----------
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW697495432109876543213/D803B20E_00.kdz
Or this one for bell I got it from bigboys thread
OP updated
OP updated with links to the files individually, as requested by few members here
Would I be able to flash this through that method from CM11?
arkain123 said:
Would I be able to flash this through that method from CM11?
Click to expand...
Click to collapse
I'm pretty sure.
Sent from my VS980 4G using Tapatalk
Enter The Nexus said:
I'm pretty sure.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I'm wondering 'cause it does say a 4.2.2 rom is needed and CM11 is 4.4, right? Can I just sideload these files from CWM?
Yes you can, but root and twrp 2.6.3.3 is must needed
Sent from my LG-D802 using XDA Premium 4 mobile app
What Rom version is this ? I mean open Europe or something else... Thanks for your work..
Its a universal Rom, for all g2 802.supports all areas. Try it, enjoy
Sent from my LG-D802 using XDA Premium 4 mobile app
@rastigo thanks for this ROM!
Just wanted to report that the process works flawlessly with CWM custom recovery, too; I had it installed because was using Cloudyfa's ROM before.
I like this because is more stock-perfect than others.
Cheers!
Since this ROM have recovery, if we want go back to JB, can it be by flashing nandroid backup via recovery or should flash kdz file?
No you would be required to flash Know unless you have jb baseband
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
Yes you can, but root and twrp 2.6.3.3 is must needed
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't access twrp from my device (it's a d805 with a d802 rom), is there no way to flash it through CWM? Would downgrading the installed twrp work?
arkain123 said:
I can't access twrp from my device (it's a d805 with a d802 rom), is there no way to flash it through CWM? Would downgrading the installed twrp work?
Click to expand...
Click to collapse
As I wrote a couple of posts above, I went through the installation process starting from CWM, precisely this version modded by Cloudyfa.
I have TWRP 2.6.3.4 installed. Can I do it? if not how can I downgrade it to 2.6.3.3? thanks and does it matter if the phone 16gb or 32gb
Hi
Im new to this forum and i flashed my first custom ROM yesterday ... Im happy with the ROM. Actually the developer has given a new OTA zip file for flashing ... He requested to update to new version of ROM using OTA zip. But i dont know how to flash a OTA zip file to my micromax canvas 4 A210 ... Please someone help me how to flash ...
Thanks
Sent from my A210 using XDA Free mobile app
Just place the ota zip file into u r memory card.... Goto cwm recovery then update zip option....
Press thanks if I helped u...... ?
Sent from my A210 using Tapatalk
Hi ceaser thanks for your reply... I did the same as you said but i'm getting an error saying "installation aborted" ... Donno wat to do now ...
Sent from my A210 using XDA Free mobile app
vickys1038 said:
Hi ceaser thanks for your reply... I did the same as you said but i'm getting an error saying "installation aborted" ... Donno wat to do now ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
use this recovery http://forum.xda-developers.com/canvas-4/development/recovery-clockworkmod-6-0-4-8-t2739053
possible OTA file is corrupt
vickys1038 said:
Hi ceaser thanks for your reply... I did the same as you said but i'm getting an error saying "installation aborted" ... Donno wat to do now ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
it can be possible tha OTA file you are flashing might be corrupt
try asking on the ROM forum itself or tell us the name ROM NAME OR DEELOPER NAME
Im using pranjal's canvas 4 ROM ... I flashed the ver 1.1 of his ROM using SP Tools ... Im interested to upgrade to ver 3 ... But when trying to flash OTA zip file in CWM from my internal SD it says 'installation aborted'... Please help me yogesh ...
Sent from my A210 using XDA Free mobile app
vickys1038 said:
Im using pranjal's canvas 4 ROM ... I flashed the ver 1.1 of his ROM using SP Tools ... Im interested to upgrade to ver 3 ... But when trying to flash OTA zip file in CWM from my internal SD it says 'installation aborted'... Please help me yogesh ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
After 1.1 go for ota.... Or flash simultaneously the latest builds...... Got it.... ?
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
ceasar47 said:
After 1.1 go for ota.... Or flash simultaneously the latest builds...... Got it.... ?
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
Click to expand...
Click to collapse
Hi actually pranjal released an OTA update which allows user to directly update to ver 3 from any prev versions ...
Sent from my A210 using XDA Free mobile app
I am ising the same... I hav flashed step by step
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
ceasar47 said:
I am ising the same... I hav flashed step by step
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
Click to expand...
Click to collapse
From his page i followed all the steps
HIGHLY RECOMMENDED PROCEDURE FOR ENSURING SPEED AND PERFORMANCE!!
CAN BE FLASHED DIRECTLY OVER ANY ROM!
1. Backup your device data. Turn off your device.
2. Download Pranjal's ROM v1.1 and SP Tools.
3. Extract both the files in separate folders.
4. Run "Flash_tool.exe"
5. Click "Scatter-loading" and select the "MT6589_Android_scatter_emmc.txt".
6. Click "Download"
7. While your device is turned off, connect it via USB and SP tools will download the rom to your Canvas 4.
8. Wait for a green circle, after which turn on your device and format via settings.
9. Run "xposed installer" and click "framework" > "Install" > "ok" > "back" > "modules" > check gravity box and xuimod > reboot
10. ENJOY
11. Post your feedback!
12. FLASH THIS TOO AND RECEIVE ALL FUTURE UPDATES VIA OTA
And when i click on the 12th step it goes to a link and i downloaded the zip file with File size: 271.7 KB
Uploaded: 2014-03-24 05:14:52 ...
No need just download manual updates flushable zips... Place them in card and flash it
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
ceasar47 said:
I am ising the same... I hav flashed step by step
Don't forget to press thanks...... Cause a thanks means a lot.......
Regards
ceasar47
From Canvas 4..........
Click to expand...
Click to collapse
Further the Ver 3 shows as follows
VERSION 3.0(30 June 2014)
DOWNLOAD HERE OR VIA OTA FROM YOUR APP DRAWER
DIRECT UPGRADE FROM ANY VERSION OF PRANJAL'S ROM TO V3 HERE :fingers-crossed:
yogesh.kalyana said:
it can be possible tha OTA file you are flashing might be corrupt
try asking on the ROM forum itself or tell us the name ROM NAME OR DEELOPER NAME
Click to expand...
Click to collapse
Im using pranjal's canvas 4 ROM ... I flashed the ver 1.1 of his ROM using SP Tools ... Im interested to upgrade to ver 3 ... But when trying to flash OTA zip file in CWM from my internal SD it says 'installation aborted'... Please help me yogesh ...
Sent from my A210 using XDA Free mobile app :fingers-crossed:
vickys1038 said:
From his page i followed all the steps
HIGHLY RECOMMENDED PROCEDURE FOR ENSURING SPEED AND PERFORMANCE!!
And when i click on the 12th step it goes to a link and i downloaded the zip file with File size: 271.7 KB
Uploaded: 2014-03-24 05:14:52 ...
Click to expand...
Click to collapse
just simply go to the second post by pranjal where he allows you to update directly to v3 fom any versions before ,and yes his ROMS are not flashable via CWM properly use sp flash tools only
yogesh.kalyana said:
just simply go to the second post by pranjal where he allows you to update directly to v3 fom any versions before ,and yes his ROMS are not flashable via CWM properly use sp flash tools only
Click to expand...
Click to collapse
Can you guide me how to update OTG file using SP flash tool ... Any procedure in detail ...
Sent from my A210 using XDA Free mobile app
or try this first
vickys1038 said:
Can you guide me how to update OTG file using SP flash tool ... Any procedure in detail ...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
in your app drawer there must be an app saying OTA tap on that and try for an upgrade while your wifi or data is on
if it upgrades it is good if it does not
then here is sp tools procedure
http://forum.xda-developers.com/showthread.php?t=2466694:angel:
yogesh.kalyana said:
in your app drawer there must be an app saying OTA tap on that and try for an upgrade while your wifi or data is on
if it upgrades it is good if it does not
then here is sp tools procedure
http://forum.xda-developers.com/showthread.php?t=2466694:angel:
Click to expand...
Click to collapse
I went through the link given by you ... I would lik to know where i should place the OTG zip or what i should select ... Where to get scatter file and also how to get this OTA updated using SP tool ... Very much confused ... Please help
Sent from my A210 using XDA Free mobile app
yogesh.kalyana said:
in your app drawer there must be an app saying OTA tap on that and try for an upgrade while your wifi or data is on
if it upgrades it is good if it does not
then here is sp tools procedure
http://forum.xda-developers.com/showthread.php?t=2466694:angel:
Click to expand...
Click to collapse
Any one help me how to flash OTA file of pranjal rom using SP tool ... I flashed ver 1.1 using sp tools but now i like to know how to flash OTA zip file ... Please anyone tell where to place OTA file and what to select in scatter region...
Sent from my A210 using XDA Free mobile app
vickys1038 said:
Any one help me how to flash OTA file of pranjal rom using SP tool ... I flashed ver 1.1 using sp tools but now i like to know how to flash OTA zip file ... Please anyone tell where to place OTA file and what to select in scatter region...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
Don't worry i will ask pranjal to help you out a little
Sent from my A210 using XDA Free mobile app
vickys1038 said:
Hi
Im new to this forum and i flashed my first custom ROM yesterday ... Im happy with the ROM. Actually the developer has given a new OTA zip file for flashing ... He requested to update to new version of ROM using OTA zip. But i dont know how to flash a OTA zip file to my micromax canvas 4 A210 ... Please someone help me how to flash ...
Thanks
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
hi!
1. i think you have installed pranjals rom v1.1 with stock recovery. Please tell me the color of the text when you boot up in recovery. Is it blue or orange?
2. If you have installed with stock recovery, then it is fine, I will provide you with CWM recovery which you can flash via SP tools. It is a small file.
(please quote this text when you reply, because then I get a notification. Then I can reply faster.)
---------- Post added at 12:08 AM ---------- Previous post was at 12:03 AM ----------
For guys who are new and downloading all the updates step by step after v1.1.
1. Install pranjals rom with cwm recovery and not stock recovery. If you have stock recovery, then I will provide you with the CWM recovery. There is no need to download the full v1.1 again.
2. It is recommended to directly flash v3 direct upgrade file. You can flash it over any version of my rom. It will save a lot of data and time and confusion.
3. While doing this, do not worry about OTA. It will automatically be updated.
4. When you are fully updated, then OTA will show you some error. Do not panic, it is something I did so that the updates will be of less size.
5. If you are not fully upgraded, then OTA will show that an update is available.
---------- Post added at 12:13 AM ---------- Previous post was at 12:08 AM ----------
vickys1038 said:
Any one help me how to flash OTA file of pranjal rom using SP tool ... I flashed ver 1.1 using sp tools but now i like to know how to flash OTA zip file ... Please anyone tell where to place OTA file and what to select in scatter region...
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
the zip file (which you are referring to as OTA zip file) cannot be flashed via SP Tools. It needs to be flashed by CWM recovery.
Hey all,
I have since June a Huawei Ascend P6 with a Chinese version of Android 4.4, the phone is bought in The Netherlands but upgraded in advance to 4.4 Beta. I want to update this version to a Europe version of the software. The software version is: P6-U06V100R001C17B507, EmotionUI 2.0.
Is this possible and how can I do this?
Thnx in advance!!
If you go in general section of the forum for p6 you can find a guide for reverting back to 4.2 (jb) or 4.4 (kk) international vetsions by flashing a small unicom firmware.
Sent from my P6-U06 using xda app-developers app
Link
tileeq said:
If you go in general section of the forum for p6 you can find a guide for reverting back to 4.2 (jb) or 4.4 (kk) international vetsions by flashing a small unicom firmware.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Could you post the link?
I can not find the thread.
http://forum.xda-developers.com/showthread.php?t=2951566
Sent from my P6-U06 using xda app-developers app
Unlock phone
I can't get my Phone to unlock. Can someone give advise or tips?
New problems
Alright I have a new problem :crying:
I have been stupid and careless.
I tried to install the rom but it didn't work, so I tried to unlock my Phone that also didn't work.
So I installed twrp 2.6.3.0 and whiped all files on the Phone.
So now I don't have any OS at all.
How can I install a Rom trough the install function on TWRP and wich rom can I use?
I hope that someone can help me.
kevin1232sn1 said:
Alright I have a new problem :crying:
I have been stupid and careless.
I tried to install the rom but it didn't work, so I tried to unlock my Phone that also didn't work.
So I installed twrp 2.6.3.0 and whiped all files on the Phone.
So now I don't have any OS at all.
How can I install a Rom trough the install function on TWRP and wich rom can I use?
I hope that someone can help me.
Click to expand...
Click to collapse
Ok so first download this http://forum.xda-developers.com/showthread.php?t=2765202
Then get an update firmware from internet (I would suggest B125) and put it on your sdcard. Then with the tool, while the phone is connected to pc, install stock jb recovery through fastboot commands (if you don't know how I can help you there too). After a successful flash of the recovery you can boot into it and install the stock firmware which will bring back your P6 to life. If anything doesn't work write here and we'll see where its stuck.
Sent from my P6-U06 using xda app-developers app
Usb drivers
Could you post a link to the huawei usb drivers? I can't get it installed on my pc at home.
Thnx for helping me out!!
If you have the hisuite it should install them.
Sent from my P6-U06 using xda app-developers app
---------- Post added at 19:46 ---------- Previous post was at 19:45 ----------
http://consumer.huawei.com/minisite/HiSuite_en/
Sent from my P6-U06 using xda app-developers app
Jb recovery
Could you explain how to install stock jb recovery?
I have downloaded b125 and connected my device.
This is the thread that explains how to switch between custom (twrp 2.6 that you have) and stock recoveries (for jb that you want to go back to). You have all the steps and links for downloading necessary files. If you still have problems write here and I'll see what is there to be done.
http://forum.xda-developers.com/showthread.php?t=2534420
Sent from my P6-U06 using xda app-developers app
as my title says i want to move from my current device firmware and ota to the newest ...
ive read and heard that there is actually a legal and official 4.4.X ota
Actually im running 4.2.2 P6-U06V100R001C00B115SP04
an Ancient Stuff
can anyone guide me through
thanks !
KingMikeLOL said:
as my title says i want to move from my current device firmware and ota to the newest ...
ive read and heard that there is actually a legal and official 4.4.X ota
Actually im running 4.2.2 P6-U06V100R001C00B115SP04
an Ancient Stuff
can anyone guide me through
thanks !
Click to expand...
Click to collapse
Well I don't think Huawei have release EMUI 3.0 update for the Europe yet. So you can't get it with OTA.. You will have to manually download it, put it on your sdcard in dload folder and update it with local update. I suggest you to go with OTA until you go to the latest version available. Currently last versions B708 international repack and B709 repack from c00. Full process should be b115>b118>b132>b512>b708 . For the b709 read instructions in the topic
Sent from my HUAWEI P6-U06 using XDA mobile app
AdnanCG said:
Well I don't think Huawei have release EMUI 3.0 update for the Europe yet. So you can't get it with OTA.. You will have to manually download it, put it on your sdcard in dload folder and update it with local update. I suggest you to go with OTA until you go to the latest version available. Currently last versions B708 international repack and B709 repack from c00. Full process should be b115>b118>b132>b512>b708 . For the b709 read instructions in the topic
Sent from my HUAWEI P6-U06 using XDA mobile app
Click to expand...
Click to collapse
I would skip the B118.
Sent from my SM-G850F
Can you guys give me thebstep by step with links ill donate some thanks
Sent from my HUAWEI P6-U06 using XDA Free mobile app