Hi everyone..i just wanna ask if you having trouble with mtp in kitkat.my phone seems not recognize by my pc even if what rom i used..i tried all the best solution out there..plzz help me..thx..
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
joesalve said:
Hi everyone..i just wanna ask if you having trouble with mtp in kitkat.my phone seems not recognize by my pc even if what rom i used..i tried all the best solution out there..plzz help me..thx..
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Check your drivers in windows. Also make sure you are NOT using fast charge.
I bet it is the cable. I had the same issue. Go to device manager and enable "show hidden devices". Then delete every driver that has something to do with your phone. Then plug your phone in with a diffrent cable. Worked for me. Also you can try to enable or disable usb debugging.
Sent from my Galaxy Nexus using XDA Premium HD app
I have the same issue. Gonna try deleting drivers
Sent from my Galaxy Nexus using Tapatalk
Brad92 said:
I have the same issue. Gonna try deleting drivers
Same issues, having been at it for days, still no solution!
Click to expand...
Click to collapse
I had a similar issue. I couldn't get the phone to be recognized on my work PC (using a cable that has always worked) or at home on Mac using Android file transfer and a different cable. What I think happened in my case is that I was connected to my PC in MTP mode then I unselected MTP so that neither MTP nor PTP was selected. That is what was aiming for (I only wanted to charge not connect). Though then when I went to plug in later as described above nothing came up. I looked all over for the USB settings to change it back to MTP but couldn't find it. I am sure it is there somewhere.
Anyways, after rebooting several times with no luck, I went nuclear (factory reset) which did the trick. I am running Shiny 4.4.2 and have had a pretty buggy go of it. I am likely switching ROMs, not that this necessarily has anything to do with it.
Good luck!
Related
Hi, I'm new to the galaxy nexus. I used to use the rezound.
So far everything seems fine except usb connect to the computer.
The usb works fine when charging, but when I connect to my computer for storage or unlocking, I get "USB device not recognized" problem.
The samsung driver has been installed and debugging has been turned on as well.
Also, when I was using the rezound, there were no usb problems.
Am I missing something or having a defect device?
Guess you are on windows xp?
Sent from my Galaxy Nexus using xda premium
msedek said:
Guess you are on windows xp?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No, win 7 home premium 64bit.
qudwis said:
No, win 7 home premium 64bit.
Click to expand...
Click to collapse
So this : (took from jubakuba thread)
Get the drivers:
Uninstall any previously attempted drivers if they don't work and move to the next.
Samsung's website has a download here under "Manuals & Downloads > Software."
Option Two: Try this one as well.
PDAnet's drivers may work if the above options don't. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
While that is downloading, on your Galaxy Nexus: turn USB debugging on.
This can be found in Settings>Developer Options>USB Debugging
Sent from my Galaxy Nexus using xda premium
Thank you, I'll try the third option
Whoops nevermind.
GN Sent
My Pc just stopped recognizing my phone when i connect it. How can i fix this problem?
Try the troubleshooter in Kies to reinstall the drivers
Sent from my GT-N7100 using xda premium
Pc running Windows or Linux???
gula187 said:
My Pc just stopped recognizing my phone when i connect it. How can i fix this problem?
Click to expand...
Click to collapse
If you running Windows i cant help you but if you running Linux especially Ubuntu heres a quick video o guide on your quest to find a connection https://www.youtube.com/watch?v=3ehnoJn6CEk he has a nifty script.
I'm running Windows 7
Sent from my SPH-L900 using Tapatalk 2
Currently there are known issues between the Samsung and Windows. Refer to this thread: http://forum.xda-developers.com/showthread.php?t=1837434
You can try the solution there. Works for most people. For me it doesn't and I'm just waiting for Samsung and Windows to sort things out.
Has a solution been found yet to enable UMS on the Sprint GS3 ?
Does CM10 have this enabled and does it work on the Sprint GS3?
markdb77 said:
Has a solution been found yet to enable UMS on the Sprint GS3 ?
Does CM10 have this enabled and does it work on the Sprint GS3?
Click to expand...
Click to collapse
I personally went into the market for this same reason and haven't found a viable app or for that matter, solution to this problem.
Sent from the Wicked!
I'm pretty sure XDA featured an app on the front page a while ago.
CM10 does have UMS, and it works. The only problem I had was that it would mount the phone as a CD-ROM until I toggled USB debugging (on if it was off or off if it was on), but after toggling, it worked perfectly.
Internatonal GS3 can use the EASY UMS app, but I understand that this does not work on the Sprint variant.
Thanks for posting your experience with CM10.
Sent from my SPH-L710 using xda app-developers app
markdb77 said:
Internatonal GS3 can use the EASY UMS app, but I understand that this does not work on the Sprint variant.
Thanks for posting your experience with CM10.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Try the latest version. I sent a fix to the developer cause he was taking his sweet arse time with maintaining the thread so I got sick of waiting. You may like to try my app it's self but I modded mine for the I9305 International LTE S3, so it may not even work?
Here it is worth a shot
https://dl.dropbox.com/u/43088692/SGS3Easy UMS_1.7-LTE.apk
If it doesn't work then I posted a 'How to' in the EasyUMS thread. Although the dev may have had it removed? Anyway check the main thread out. try his 1.8, try my hacked 1.7 and then if you luck out try the instructions I posted in the thread.
if worse comes to worse and they were removed then I will dig it up and post it up here for you. I can't do it for you guys cause I don't have your device and requires digging around a little bit in the root level to discover for your selves.
James
People have also been using samba file sharing and/or ftp servers. Both are options if you have time to wait for slower read/wrote speeds
Sent from my SPH-L710 using xda app-developers app
I know for a fact that this is built into TWRP if you use that recovery. just go to mount > mount usb while the device is connected to the computer and bam faster transfers
When requiring UMS several times daily, the minor inconvenience of going into bootloader becomes a hassle.
Sent from my SPH-L710 using xda app-developers app
Has anyone had success with getting USB MASS STORAGE working on the Sprint S3 ???
I just tried flashing CM10 (Stable and 10.1 M) No dice..
CM10 Stable has the option in Settings to change from MTP TO UMS, but after checking the box, it immediately unchecks and checks the MTP box.
Perhaps using a different kernel than stock would allow UMS ???
Anyone? .......Bueller??
Not sure if this is what you all are talking about but here is what I did.
Using Apex launcher, press/hold on homescreen, choose shortcut. Choose Activities. Scroll all the way down to USB settings. Click on it. It will expand to show USB settings com.sec.android.Kies.kies. Click that. What this does is put an icon on your homescreen that when you click allows you to choose between Samsung Kies or Mass Storage. Is this what you all are wanting is quick access to Mass Storage mode? Whats the difference between this and MTP? Either way, your internal and external storage shows in the PC right?
I'm on The People's ROM 3.14 BTW.
el6006 said:
Either way, your internal and external storage shows in the PC right?
Click to expand...
Click to collapse
Nope. I have yet to get any Linux MTP programs to work with an Android device. Therefore, UMS is necessary to connect my phone to my computer.
Putting the ILLA in KILLA since 1985
EndlessDissent said:
Nope. I have yet to get any Linux MTP programs to work with an Android device. Therefore, UMS is necessary to connect my phone to my computer.
Putting the ILLA in KILLA since 1985
Click to expand...
Click to collapse
I have had some success with gMTP on Lubuntu... Still slow as hell, so I don't consider it a victory...
Sent from my SPH-L710 using xda app-developers app
I've gotten that ums app to work for my s3 a number of times. It worked fine for me.
Sent from my SPH-L710 using Tapatalk 2
Okay i'm trying to root my phone using the galaxy note tool kit and your phone has to be in debugging mode. Well when i turn debugging mode on nothing happens. it has attempted to install the drivers like 3 times (it doesn't try every time i plug my phone in only once in awhile) but all 3 times it has failed to install the android_samsung driver. can anyone help?
I have heard people say to install pdanet on your pc. The Samsung drivers in it seem to work on our Notes.
Sent from my SPH-L900 using xda premium
KB112 said:
I have heard people say to install pdanet on your pc. The Samsung drivers in it seem to work on our Notes.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I already have that installed
Then uninstall both and only install one. If not try other ports.
Sent from my SPH-L900 using xda premium
With my note is plugged in if i try to connect PDA it tells me to make sure my phones connected and that usb debugging is on well its on in my phone but still my computer wont detect that it is... this is pissing me off
Every time i try re installing the driver it always fails on the Samsung_android i have tried several times now unistalled everything tired different ports nothings working
Can anyone help me?
Try a different usb cable.
Sent from my SPH-L900 using xda app-developers app
RTC88 said:
Try a different usb cable.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I have ive tried 3 different cables
Maybe try a different pc then? I know I had a hell of a time using Revolutionary to root my Evo 3D. It just would not work on my HP Lappy running windows 7 64bit. I had to use my wife's little Acer Netbook. Worked like a charm. so try to use another pc in the mean time.
Sent from my SPH-L900 using xda premium
KB112 said:
Maybe try a different pc then? I know I had a hell of a time using Revolutionary to root my Evo 3D. It just would not work on my HP Lappy running windows 7 64bit. I had to use my wife's little Acer Netbook. Worked like a charm. so try to use another pc in the mean time.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I'll try it.
I tried a different computer 2 others actually different cables and i even tried it on my computer again but through linux i ran the tool kit in wine. Nothing i have tried will get my phone into usb debug mode. i have had no issues before this is a replacement phone from sprint. well its new but not my original and i had no problems rooting my original
Come on someone has to know something :/
I saw you tried different cables... Did you try the cable that came with the phone?
Sent from my SPH-L900 using XDA Premium HD app
Hello, I've been trying to get my phone to connect to my mac via USB but have had no luck. I've tried Kies, AFT but nothing has worked out. I'm just trying to transfer my music and bluetooth takes way to long. I've searched other threads but it seams like no one has come up with a solution to the problem, is there anyone who can point me in the right direction or have a simple fix? I'm running CM Nightly 10.1 20130222 and my Mac is running Lion 10.7.5. Any help will be appreciated, thank you.
Reinstalled samsung drivers?
xBeerdroiDx said:
Reinstalled samsung drivers?
Click to expand...
Click to collapse
yep, all of my drivers have been reinstalled. phone has been connected, disconnected, restarted etc. with no luck.
Reaper_OneZero said:
yep, all of my drivers have been reinstalled. phone has been connected, disconnected, restarted etc. with no luck.
Click to expand...
Click to collapse
Is that the factory cable included with the phone? Different (even rear) usb ports? Sorry for the small questions. Starting at the bottom
xBeerdroiDx said:
Is that the factory cable included with the phone? Different (even rear) usb ports? Sorry for the small questions. Starting at the bottom
Click to expand...
Click to collapse
yes it is the factory cable, I have tried other cables as well. Tried both of my USB ports. Is there any other program other than AFT and Kies that I could use? Im using Wifi File Explorer Pro right now to transfer files but I would like the speed of USB if I could get it
Reaper_OneZero said:
yes it is the factory cable, I have tried other cables as well. Tried both of my USB ports. Is there any other program other than AFT and Kies that I could use? Im using Wifi File Explorer Pro right now to transfer files but I would like the speed of USB if I could get it
Click to expand...
Click to collapse
you likely wont get the speed of usb on an "air" transfer app. do you have usb debug mode on? i use airdroid to transfer files
For Windows you can use drivers in my Sig fixed hardware I'd . For Mac find old drivers
Sent from my SGH-I747 using xda premium
Yeah USB debug is on, alright well thanks for the help. Ill just use airdroid and look through other threads to see if other are having the ssame problem
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
xxsicknessxx said:
For Windows you can use drivers in my Sig fixed hardware I'd . For Mac find old drivers
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Reaper_OneZero said:
Yeah USB debug is on, alright well thanks for the help. Ill just use airdroid and look through other threads to see if other are having the ssame problem
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
/\/\/\/\/\/\/\xxsicknessxx just posted this. not sure if you saw it
Awesome thanks I'll have to see if I can find some
Sent from my SAMSUNG-SGH-I747 using xda app-developers app