Related
I've noticed that the connection using the micro usb cable is not snug, if I apply slight leverage to it the charge/connection is lost.
Im a bit dissapointed because I have certainly not pulled on the lead/dropped the device while attached or anything else that might have buggered the plug.
Is there any way I can make the connection snug again, or is this typical for all other devices too.
If this does turn into someting more problematic what are my steps to get it fixed, I brought this phone as an orange locked unwanted upgrade from ebay. fully boxed and sealed. (i.e. new)
Im a bit annoyed because the micro-usb plug is supposed to be more robust than the mini-usb. but to my eyes that not the case, and has proven to be not true either.
I have this issue too. Interested to see if it's a common flaw.
Sent from my HTC Desire using XDA App
Same problem here. Just got it yesterday. The loose connection is very annoying in that you cannot be sure you left in a charging state unless you unlock it and check the screen. I wonder if it supposed to be that way?
After having posted this, I realize that the thread is not for my phone, a Samsung Captivate. I trusted Google search a little too much I guess. Interesting that the problem is the same.
Same here.
Xperia X10 with a loose connection that got much worse with time. I don't expect a fix for a hardware issue, but I am taking it back to the store for a replacement. The problem is that it has gotten so bad that I can't maintain a connection long enough to get my data!! Not pleased
Jamescousins said:
I have this issue too. Interested to see if it's a common flaw.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
me 3. another thread here t=689367 and here t=692242 (wont let me post full url as noob)
May have to return to T-mobile as its really annoying
I have the Captivate, and I had to exchange mine for one that did not do this.
Yep I started getting this problem a few days ago. Pissing me right off.
can someone tell me if the Samsung captivate and Xperia X10 both have micro-B USB ports also ?
Micro USB Sucks
I have the HTC Incredible and whenever its plugged into my PC you can tell by the audibles (and by HTC Sync failing 1/2 the time) that it keeps disconnecting and reconnecting - especially if you lift the phone or move the cable. So I was just as surprised to hear the MicroUSB was supposed to fix some of the wear and tear issues of MiniUSB - which is just untrue!!!
My HD2 has a loose connection
http://app1.appserver.dk:8080/RepairPictures/servlet/getPic?id=51371
<-- This is the chip. And HTC wont repair it. They say it's my own fault? :S
I've got this problem too with my desire and realised it's the cable. I got my desire on the release date (had it preordered) and the plug on the cable is smooth on all sides so it slips in and outu the phone easily. However, my girlfriend got a desire 2 weeks ago, and the micro-USB plug on her cable has two little spring loaded bumps on it, which gives it a positive "click" when it's plugged into the phone and it takes a lot more force to remove it.
Hence I stole her cable
My cappy too
This problem is happening, albeit not as seriously as some of yours, to my cappy now. I have had it for just under a year now. Looking back I could have been a little gentler with it...
Running Teamhacksung's ICS Build 9.
I've got the same issue - turns out that it's the cable more than anything, as when I plug the in-car charger one (a different cable) in, everything worked perfectly.
terrible design
Every device I or my wife has that is micro USB has charging issues. The design in a laboratory is supposed to get 10,000 cycles. But our experience is that a device after 6 months starts to have issues. Finally after a year about every device must be replace as the charging port is so loose that not even the highest quality cables will stay seated well enough to guarantee a charge or data connectivity. Very disappointed that EVERY phone uses this. Well other than Apple, which I may just have to go to since I cannot afford new phones constantly. The wireless companies KNOW it is a flaw in the design of the port also. Not a one of them will warranty the phone if the issue is the charging port. I am talking clean ports here also. No lint or anything.
Down with micro USB
lukester01 said:
Every device I or my wife has that is micro USB has charging issues. The design in a laboratory is supposed to get 10,000 cycles. But our experience is that a device after 6 months starts to have issues. Finally after a year about every device must be replace as the charging port is so loose that not even the highest quality cables will stay seated well enough to guarantee a charge or data connectivity. Very disappointed that EVERY phone uses this. Well other than Apple, which I may just have to go to since I cannot afford new phones constantly. The wireless companies KNOW it is a flaw in the design of the port also. Not a one of them will warranty the phone if the issue is the charging port. I am talking clean ports here also. No lint or anything.
Down with micro USB
Click to expand...
Click to collapse
I agree, micro USB is horribly unreliable across all brands. Too bad I absolutely loathe iOS, because I would consider getting an iPhone if I could run Android on it. Hopefully USB Type-C will be better.
5 data points and a question
First, additioanal data points:
I've had 2 different devices with micro usb connectors and both failed within 3 days of beginning to use them. I can't swear it was the female socket that was damaged but that was my impression. The prongs on the male connector were NOT flattened. I looked for that.
I had another device, a Nook Color I believe it was called, that had a usb charging/data connector that was their own slightly modified design of one of the usb standards. I can't swear whether it was a modified mini or a modified micro but I think it was a modified micro. Anyway the socket was a little deeper than the standard. The idea was that if you plugged in a standard male connector it worked the same way as a standard socket but if you plugged in the longer Nook male connector it went in deeper (I'm straining to refrain from low humor here), additional contacts came into play and it would charge faster. In the Nook case it was definitely the male connector that would break. I replaced the charger twice before the Nook failed for other reasons (I suspect a cat baptised it). If you search the net you'll find a lot of people had the same problem.
So in my case micro-usb is either 2 for 0 if you don't count the Nook, 3 for 0 if you count the Nook once, or maybe 5 for 1 if you count the Nook replacement chargers and charitably assume the last one would have worked for a while if the cat hadn't scented it.
I've NEVER had a problem with large, plain, standard, type A rectangular connectors. I think the idea that the mini is too big is one only Madison Avenue types could come up with. Even the standard type A isn't really too big. After all, how big is a thumb drive? I suspect it has more to do with making it a wee bit cheaper than making it smaller.
So yeah, micro-usb just plain sucks. Assuming Frank's posts in this thread at stack exchange:
electronics.stackexchange dotcom /questions/18552/why-was-mini-usb-deprecated-in-favor-of-micro-usb
aren't fraudulent, Nokia pressured the USB Implementers Forum to accept the micro standard, implicitly against the better judgement of some people involved. I'm therefore inclined to never buy a Nokia anything.
So much for the problem. I'm thinking about workarounds because there is a tablet I'd really like to use that charges through a female micro usb port. If I can't charge the battery it's useless. So I'd appreciate comments regarding the feasbility of these alternatives:
WORKAROUND # 1:
Carefully insert a male-micro-usb-X-female-standard-type-A adaptor into the device and glue them both to a piece of waterproofed luon (very light plywood) and then connect with a cable that has male standard full size rectangular type A connectors at BOTH ends. I've never had any problem with the standard full sized type A and they are easy to replace if I do. Though both adaptors and cables as described, are readily available, it is said that the maleXmale cables can damage equipment in some cases and I'm don't know enough to be sure this is not one of those cases.
WORKAROUND #2:
Alternately I could just glue the micro end of the kind of cable that comes with such devices to the luon and leave the rest of the cable dangling. Downside: Messy dangling cable. Upside: I KNOW it is safe.
Any thoughts on these workarounds would be appreciated.
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
All you need is a standard MicroUSB to USB cable. Make sure it's a standard cable, and not a "charge only" cable though.
A bit of advise, generally if you buy a cable that isn't a Samsung USB cable, you're going to have to take a razor blade to your new cable and cut away some of the rubber around the MicroUSB plug. You'll see that untrimmed, you might have a hard time getting the cable secured in the phone's port.
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
All it takes is a razor blade or something similar, and a few seconds. I use a bunch of generic USB cables which all have fat plug heads. Trimming a little of the rubber off and they all work perfect.
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
i bought a blackberry cable from best buy... data and charging... 16 bucks. but when ever your puppy ate your data cable in the middle of the night and you're phone is at 30% battery, ya tend to pay for it...
Inexpensive replacement OEM Charger + USB Cable for Captivate SGH-i897!
4got2g0 said:
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
Check out www all4cellular DOT com
They have the OEM Samsung Captivate (U.S./Edison) Wall Charger and USB Charging+Data Cable for $6.95 + $2 Shipping.
The item number is "eta0u60jbe". But this item # includes BOTH the USB Wall Charger (# ETA0U60JBE) AND the USB-to-Micro USB data/charging Cable (# ECC1DU2BBE)!
I bought two of these and they are EXACTLY like the original Charger and ~5ft. USB Cable that comes with the Captivate. They are OEM/Samsung-branded and labeled and are not Chinese-made knock-offs. I am in SoCal and received them within a few days of ordering.
Here's a direct link:
www DOT all4cellular DOT com / samsung-eta0u60jbe-wall-charger DOT html
Hope this helps!
Billy B.
^^^ spam!!!
monoprice .com is better!
foofiebeast said:
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
Click to expand...
Click to collapse
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
I second the Monoprice.com recommendation. I buy ALL my cables there. The heads on their micro USB cables are too large to plug into the Captivate unmodified, but I used a Dremel to fix that.
Both of my Monoprice cables are going strong, in contrast with my OEM cable, which started out excellent, but is now so loose as to not maintain a connection unless the phone and cable are precisely arranged.
Sent from my SAMSUNG-SGH-I897 using XDA App
4got2g0 said:
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
cant hyperlink yet. I ordered 2 of these, they are good and from samsung. on sale at the moment
amazon.com/Samsung-Replacement-Charging-SPH-M330-SCH-R100/dp/B001XXUOQI/ref=sr_1_1?ie=UTF8&qid=1293013918&sr=8-1
USB cables always wear out eventually especially as much as we use them. i just accidentally bought the crappy charge only one now i need to go get a data one
Samsung Captivate Data Cable
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
lee_bruice said:
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
Click to expand...
Click to collapse
That is indeed the one he needs.
I Am Grad That Is Useful.
Happy New Year!!!
tchan012 said:
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
Click to expand...
Click to collapse
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Jmurph3 said:
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Click to expand...
Click to collapse
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
jayrod88 said:
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
Click to expand...
Click to collapse
I have a 1009 model. Assuming that means it was manufactured Sept,2010. Now to find a microUSB
We have some micro USB 5' Cables coming in Monday. If they are like the sample they not only fit the Captivate properly, but when plugged into our new Car Plug ->USB (2100mA) adapter, my Captivate shows "Charging (AC) ".
We originally brought in the Hi-Power USB car adapter so iPad & Tablet customers could both run & charge at the same time. We have had enough request from customers looking to use it with Smart Phones, that I had to find the best matching cable.
Sent from my Samsung Captivate with Perception 10.2, Firebird2 v0.4 #49 Kernel, Firmware 2.2.1, Modem T959TLJL3 using XDA App
Monoprice...ALWAYS!!
As mentioned, get your cables from monoprice. I mean, you just can't beat a usb cable for $2. If it needs trimmed, I usually just use a razor knife/box cutter to remove the bulk, and it works perfectly. I actually had to order a 25ft. VGA cable from them a couple of days ago...$8. Seriously. Definitely the cheapest place I've seen to buy cables.
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
I'm also having this issue. I wonder why...
foofiebeast said:
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
Click to expand...
Click to collapse
Yes, this is exactly what I have to do for mine to charge. So I guess I'll have to just start looking for one that will work for me. It seems just any other standard micro USB cable will do the trick. Thanks a lot my friend.
jayrod88 said:
I'm also having this issue. I wonder why...
Click to expand...
Click to collapse
Well upon further inspection, you can see how the top of the phone is curved and if you look at with the USB door open from the top and tilted slightly back you can see how the jack actually looks crooked inside the phone. I'm quite sure that this is because of the curved top parallel to the circuit board that has the jack is too tall. And I think for some reason I might need to trim down the micro end a bit on the front side..it looks like its hitting the front side of the phone.
I'm looking for a replacement cable as well...even OEM is fine. The case around mine cracked off one night when I feel asleep playing on my phone. Mine was always kind of loose compared to the att charging cable which is nice and tight. Does radio shack carry cables like this?
Sent from my SAMSUNG-SGH-I897 using XDA App
i called AT&T about this with my cappy and they said that the charging port was bad and sent me a new phone , thats been 3 mo ago and the problem hasnt recurred.
(just a thought)
Search Amazon for "blackberry usb cable micro usb". The first result should be it, it's a very high quality, shielded cable. To get a solid, snug fit I suggest a razor or a knife to easily cut back some of the rubber around the micro tip. Works amazingly well. I could even make it work before I trimmed it.
just to elaborate, the specific micro end is called a "micro b " usb connection.
not to be confused with mini or micro a
of course the other end is just standard.
The place I work has a 5' nice quality cable that fits my Captivate tight. They got them to go with the 2100mA USB Car Charger we sell. Cost on the cable is $ 4.99 plus shipping (about $2.99 first class parcel).
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I'm not sure if its quality, or just chance, but I've found that only some 3rd-party cables will work. I've tried a blackberry one that didn't work, and a really cheap one that did.
I would suggest keeping the one you got from samsung, just in case.
I'd like to know if anyone else had issues with cables not working?
I got a Samsung cable designed for the galaxy S on Amazon for like $6 with free shipping.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jmurph3 said:
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem.
I used some tools(hammer,knife, etc) to fix the cable.
Now my cable works fine!!
Sent from my phone
I just used a razor blade to trim the rubber back, works great.
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
bluemoon1221 said:
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
Click to expand...
Click to collapse
You should saved me from buying 3 more cables. I distroyed my OEM cable to make a jig because I bricked my phone. I ordered 3 sets of cables and they all had the same problem.... Usb kept popping off. So I was just about to go out and order 3 more sets if cables, this time OEM untill I decided to read this tread. It never occured to me that it was fitting in well because of the extra rubber on the connector. I trimmed it down and now the cable snapped in perfectly like it was supposed to. Thanks for the fix!
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm afraid of buying the wrong cable off Amazon. There is so much out there. Can anyone post a link?
[email protected] said:
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
Click to expand...
Click to collapse
I know this is getting old, but it took me about 2 hours to find an answer that WASN'T recommending to just make sure the slider was all the way open. For no reason at all, my phone cable just wouldn't hold a real connection this morning... your answer saved the day
For cables that are good quality and cheap, go to www.meritline.com ....... I have never gotten a bad cable from them, typically I use their HDMI cables but the USB cables are less complex and work just as well. My last usb cable was one of theirs.
As we all know, the new Zenfone 2 is missing wireless charging capabilities, however there are multiple solutions to enable wireless charging on basically any phone.
Example is http://www.amazon.com/BEZALEL®-Wire..._1_4?s=wireless&ie=UTF8&qid=1432149451&sr=1-4
It is a cover with a Qi receiver built in, which connects to the charging port and it also provides an independent micro usb port as a part of the case.
The absence of wireless charging in Zenfone 2 is a deal breaker for me ( don't judge) and as soon as an appropriate case is available, I'll get it and the phone as well.
Please post your findings here.
Would love to use wireless charging but using a cover like the one posted is out of question.
I love the slim form and feel of this phone. so i will have to live without QI and other solutions.
This will occupy the mUSB port but would probably be the best current solution.
hkdmjack said:
This will occupy the mUSB port but would probably be the best current solution.
Click to expand...
Click to collapse
That's pretty cool. I like wireless charging because I'd rather not wear out my micro usb...but that setup kinda marries you to wireless charging all the time. I'd have to rig up wireless charging in the car and at work...not just at home. You use something like that?
nathan118 said:
That's pretty cool. I like wireless charging because I'd rather not wear out my micro usb...but that setup kinda marries you to wireless charging all the time. I'd have to rig up wireless charging in the car and at work...not just at home. You use something like that?
Click to expand...
Click to collapse
Not sure if I'm going to stick with the ZF2, so I haven't gone out and done all that yet but qi adapters are pretty cheap now for both home and car. How effective some of the car ones are though are another story. iOttie has two models out now that look promising for the car.
There may also be the possibility of placing those adapters into a separate case just meant for wireless charging... remove the case if you need the mUSB port.]
Or... if they do release new back covers... get one that you install the qi adapter in and then one that you won't have the qi adapter in.
WHYYYYYYYYY
Why did Asus decide not to include the qi pins in the back ((((((((((((((((((((((((((((((((((((((((((((
>_<
what to do :'(
Here's a teardown: http://www.myfixguide.com/manual/asus-zenfone-2-teardown/
You could solder the DigiYes posted earlier (http://www.amazon.com/gp/product/B00HI8JYFE) onto the usb board. Or you could probably just jam the wires into the connector for a non-permanent solution. The pictures of the DigiYes are a little conflicting, but if it does have leads for the data pins, you'd be best off omitting them (you'll be limited to 500ma qi charging).
This is of course assuming there's enough space to wedge the DigiYes between the back cover and phone.
ziddey said:
Here's a teardown: http://www.myfixguide.com/manual/asus-zenfone-2-teardown/
You could solder the DigiYes posted earlier (http://www.amazon.com/gp/product/B00HI8JYFE) onto the usb board. Or you could probably just jam the wires into the connector for a non-permanent solution. The pictures of the DigiYes are a little conflicting, but if it does have leads for the data pins, you'd be best off omitting them (you'll be limited to 500ma qi charging).
This is of course assuming there's enough space to wedge the DigiYes between the back cover and phone.
Click to expand...
Click to collapse
Which goes back to my point. Why did Asus purposdely omit to include QI/wireless charging pins on the back? It would had cost them hardly anything extra at all, and users could just have changed back cover to get wireless charging...
That one http://www.amazon.com/BLUBOON-Unive...2630&sr=8-2&keywords=qi+wireless+charger+1000 is 1000mA, if it does make a difference. But a case integrated receiver would be much better solution, if ever.
olegy said:
That one http://www.amazon.com/BLUBOON-Unive...2630&sr=8-2&keywords=qi+wireless+charger+1000 is 1000mA, if it does make a difference. But a case integrated receiver would be much better solution, if ever.
Click to expand...
Click to collapse
I bought that model. I have a Qi charger (used with a Nexus 5) hooked up to a 2A USB Adapter, and it barely charges the Zenfone. I do not recommend. Maybe a 2A receiver would work better.
It's ridiculous.... why did asus decide not to offer a wireless charging solution similar to the previous samsung galaxies/lg.
Have the pins for charging on the back, and let the user change the case to a qi receiver case or add a qi receiver pad inside. this is honestly the only thing that disappoints on this phone (((((((((((((
ziddey said:
Here's a teardown: http://www.myfixguide.com/manual/asus-zenfone-2-teardown/
You could solder the DigiYes posted earlier (http://www.amazon.com/gp/product/B00HI8JYFE) onto the usb board. Or you could probably just jam the wires into the connector for a non-permanent solution. The pictures of the DigiYes are a little conflicting, but if it does have leads for the data pins, you'd be best off omitting them (you'll be limited to 500ma qi charging).
This is of course assuming there's enough space to wedge the DigiYes between the back cover and phone.
Click to expand...
Click to collapse
I just received mine and there is enough space in the back cover for the receiver to fit in, albeit with a small bulge. It does show my phone as charging even when just held up to my Moto 360 cradle; whether or not it's charging, however, I have no idea.
raynan said:
I just received mine and there is enough space in the back cover for the receiver to fit in, albeit with a small bulge. It does show my phone as charging even when just held up to my Moto 360 cradle; whether or not it's charging, however, I have no idea.
Click to expand...
Click to collapse
Thanks for trying. Did you actually solder or just plug it in the usb port? If you plugged it in the usb port, does the cover close without damaging the cable?
I'm asking because if that works, we could potentially design a slightly thicker but hollow back case that could hold NFC and the wireless receive without unnatural bulges.
ameel said:
Thanks for trying. Did you actually solder or just plug it in the usb port? If you plugged it in the usb port, does the cover close without damaging the cable?
I'm asking because if that works, we could potentially design a slightly thicker but hollow back case that could hold NFC and the wireless receive without unnatural bulges.
Click to expand...
Click to collapse
It closes fine but there is a bulge and the cover is left slightly open.
Here's my solution. Doesn't look good but functional.
don't judge
Click to expand...
Click to collapse
Yeah I judge, wireless charging its just another feature. A small battery, a slow processor or low memory now that's a real deal-breaker since your phone wont last a day, apps will run like hell and you will always have to micromanage just for things to run properly.
I'm way more pissed off at this phone not having a removable battery, not just because its a real deal-breaker during travel where I will be forced to lug around one of those brickish power banks but because Li-ION batteries have the lifespan of a mosquito. I already had 2 phones like that and the result was always a massive pain in the ass to deal with.
I rather buy a case with an extra battery than this thing
Three pins USB Board?
Hi there
Maybe some one knows, what are those three pins on the USB board, that are accessible without disassembly phone?? That should be connectors to charging instead of usb socket?
I have a qi charger built into my car. I do not like aftermarket charger added to the phone. So this is a deal breaker for me and will not consider any phones without buildin qi charger.
Looking to buy this phone and own a quick charging card like this. Is it possible to slip the card under the back cover (without a case) or will it cause it to bulge in too unsightly a manner?
dud89 said:
It closes fine but there is a bulge and the cover is left slightly open.
Here's my solution. Doesn't look good but functional.
Click to expand...
Click to collapse
Slooop said:
Looking to buy this phone and own a quick charging card like this. Is it possible to slip the card under the back cover (without a case) or will it cause it to bulge in too unsightly a manner?
Click to expand...
Click to collapse
It can but causes a gap near the usb port that I could not close. I would've run it inside if it didn't do that.
dud89 said:
It closes fine but there is a bulge and the cover is left slightly open.
Here's my solution. Doesn't look good but functional.
Click to expand...
Click to collapse
Great Idea.
The speed of charge is 350 MAH ?? Is to slowly (USB PC charge normally 550 MAH)
Hi,
After going through all possible options of connecting a wireless receiver to a magnetic charging port, and having no luck, I come up with something even more simpler.
Any soldering was not an option, as I wanted to keep my phone waterproof when I need it.
So I got these three things:
- Case. I was looking for something slim, preferably with covered magnetic port, since I'm not going to use it anymore. (this case I bought from aliexpress)
- MicroSD cover, didn't wanna ruin original. Cover has to be there, without it microsd will get lost.
- Wireless receiver itself. Any should do, but the longer is the cable the better.
After being using it for a month, even magnetic charging now feels like too time consuming to me )
Here's how it looks.
You cut the cover of the USB port and sd card slot? How could it be waterproof anymore?
gyuszi02 said:
You cut the cover of the USB port and sd card slot? How could it be waterproof anymore?
Click to expand...
Click to collapse
That's why I got a spare one, so I can replace it when I need it.
zhekazheka said:
After being using it for a month, even magnetic charging now feels like too time consuming to me )
.
Click to expand...
Click to collapse
Huh ? How so ?
It's only 800mA charging current on your wireless charger...that's like half of the original charger used with a magnetic cable(1.5A)
I see. I meant that it takes time, especially at night, to to align magnetic connector. As far as charging time, it takes about 4hrs.
I like this a lot. Thanks for posting. Where did you get the spare cover?
For me this would be most useful in the car. I'd still like to use the magnetic dock on my desk so now I'm off to find a dock-friendly case.
Do you have links to the stuff you bought for that?
How did you create such a small micro usb connector?