Just wanted to do a review of some cases I bought and tried recently for my LGOG, hoping the info would be useful to other people. There are some other good and cheap options available online, but these are the ones I tried first-hand. I am really happy with all three of them, so here's the proof that sometimes you get more than you pay for...
First, a generic sleeve picked up at a local dollar store while I was waiting for my Amazon order to arrive. For just $2, it's pretty much as good as free. Simple, but ingenious: two pieces of synthetic leather (it's high quality, smooth, soft, and doesn't stink) stitched together, but with an added pullout ribbon that is surprisingly convenient, and works wonderfully to get the phone out. My wife was quite amused by the way it worked (as was I ). Sized perfectly for my phone, and looks pretty nice and elegant, too. Excellent basic protection sleeve, considering the price. Highly recommended, if you prefer your phone naked, but still want reasonable protection carrying it around. Five stars from me!
Next comes the Diztronic case, ordered from Amazon. It's a low-profile TPU wrap-around skin that looks and works much better than it costs. Very nice soft touch finish, clean design with precise cutouts, sharp looks and enough protection for daily use. The fit is perfect, feels like this phone was born in it. Some people on Amazon complain that it peels the screen protector at the edges due to a tight fit, but I don't use screen protectors, so I don't care. Adds very little bulk, but gives a nice protection around the bezel, so you can safely lay your phone face down. It also levels the protruding camera lens cover on the back, so it doesn't get scratched easily. One thing that seems weird at first is that the design around the volume and power buttons is very different. But then I realized how much it actually helps -- the power is recessed deeply in the cutout, making it much less prone to accidental presses, while still easily reachable with a fingertip. Very convenient. It would be nice to have a better grip on the sides (like a diamond pattern or something), but even as is, this case still makes the phone much less slippery than naked. And I didn't like the prominent logo on the back, as I prefer all my things with as little branding as possible (ideally, none, but that's just wishful thinking). Four stars (minus one for the grip and the logo).
The last one is a cheap dual-layer case pretending to be an OtterBox, also from Amazon. I saw this case there under different brands; mine was Aimo. I used OtterBox cases in the past, and to be honest, this one is quite impressive in comparison. Pretty much the same design features (except the port covers), build quality and the level of protection as Commuter series, but for just a small fraction of a price. And it has a handy folding stand on the back, which works in both portrait and landscape. If you are reeeally nitpicky, you might find the fit between the inner silicone layer and the outer hard shell a tiny bit loose along the top and bottom edges, but hey, it's not exactly an OtterBox, OK? Again, you really have to look hard and close to notice this. All the cutouts are precise, and the buttons are nice and light to the touch. Note that this case is quite bulky, and doesn't match the design style of the phone itself, so some people may not like it for its aesthetics. But as far as protection goes, this is probably the best option for this kind of money. This case is available in different colour combinations. Nothing beats black for me, but you can get yours in neon pink, if you want. Five stars, hands down!
Thanks for these suggestions and pics.
My first case for OG was Nilkins hard plastic case - at first it may look good, but actually is a piece of you know what. The rubber layer on the case started to peel off after 2 weeks first on the corners then the rest, due to this the phone looked ugly. After a while corners just broke off completely. All this happened with regular use without any extremes.
The next one I bought was a bit cheaper also from China - TPU X Type soft silicon I guess. I've been using it for many months now and it havent changed a bit. Good protection, looks nice and I guess it wont change forever unless you cut it with scissors
So yes, cheap can be good, but buyer beware as some cheap cases will be a headache.
I have this one:
aliexpress: /item/Genuine-Brand-New-IMAK-Crystal-series-PC-Ultra-thin-Hard-Skin-Case-Cover-Back-For-LG/1027800082.html
Phone looks nice in it. The plastic is sturdy, but it scratches easily. However it's a cheap one so no risk in trying it.
And the classic one gel case:
aliexpress: /item/Hot-Sale-8Colors-S-Curve-Line-Shape-High-Quality-Soft-TPU-Rubber-Wave-Gel-Soft-Skin/1310173671.html[/url]
This offers complete protection, but it's ugly.
PS: Just copy rest of URL after aliexpress.com to see it. I'm not allowed to post links.
First case I got was this: http://www.ebay.com.au/itm/QuickSan...lePhoneAccessories&hash=item3f25597db6&_uhb=1
It still works great to this day, but peeled the screen protector off.
I have had many E975 cases, flip ones, rubber and hard ones.
Currently I am using the LgOg official bumper and it is a dream, sometimes the holes are tight but I simply file them and they work fine
The bumper: http://www.ebay.com.au/itm/181246366449?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I'm what they call a casaholic, so I tend to accumulate a plethora of cases. I will post reviews of my cases below (some of you may have seen my other OP's in the S7 Edge and Nexus 6P forums). I will keep this OP updated with plenty of details over time.
Diztronic TPU:
I am a long time Diztronic fan dating back to my LG G3. I always enjoyed Diztronic’s simple, yet appealing design that never tried to be anything other than a great case. For starters, Diztronic cases are made from TPU and feature a plain back without any visible logo which is a big plus considering how some companies use the Verizon branding standard plastering them everywhere. On this case you will only find the logo along the side discretely hiding in plain site; I’ve noticed Spigen starting to do the same, except some of their cases still sport a back logo as well. Inside the case Diztronic decided to put their main logo in a rather large in your face way. The placement of the interior logo is fine because you will never see it unless you take your phone out of the case.
Along the back of the case, the camera cutout is larger than the ones you will find on my Spigen cases. I can appreciate this design given how TPU flexes as you place your phone in it. For example if someone puts their phone in sideways and the TPU is unevenly tensioned, a more precise cutout might not be perfectly aligned (this happens all of the time if you look at the alignment while installing the case various ways). One thing I don’t particularly like is how the camera almost sits flush with the case given its width.
Now, as for the case’s feel you will find a nice soft-touch like TPU. I think Diztronic has one of the best feeling TPU’s out there with Spigen coming in second. Since Diztronic only makes a TPU case, and their Voyeur Hybrid for some phones, they do an excellent job making what’s arguably the best TPU case out there.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports:
The stock cable does fit, but it will push the TPU upward slightly due to the connectors size. I haven’t found any issues fitting the stock cable, or any of my other Type-C cables that I use for my Nexus 6P, so don’t let that discourage you. If you have large ‘studio’ style headphones with a massive aux cable you shouldn’t have any issues given the relatively large cutout on this case. It works fine with my Bose QC 20’s, Freestyles, OE’s, Samsung headphones, and some others I’ve tried. All microphone cutouts are also present.
Volume/Power buttons:
All of the buttons click exceptionally well as I would expect from a Diztronic case.
Overall: 9/10
Diztronic makes excellent TPU cases that are my personal favorite. I appreciate the work that goes into the simple, yet elegant design along with their excellent feel. My one issue with this case is how the camera sits almost flush with the TPU, other than that small personal nitpick you won’t find a better TPU case out there.
Diztronic TPU
Incipio Octane:
Incipio has a rather slim offering for the HTC 10, but they are making some of their best cases for it. I’m bringing back a favorite from my S7 Edge: the Incipio Octane. This case is a hybrid with a harder TPU bumper and what I believe to be an acrylic frosted back.
First lets talk about the build of this case; I think Incipio has a nice unique design given the tire tread styled bumper region that contrasts the frosted clear back. The frame doesn’t provide a whole lot of grip, but it doesn’t need to because unlike the Spigen Ultra Hybrid this case is not slippery, nor does it attract fingerprints. Incipio paid particular attention to detail by having a black border around the camera/flash cutouts which will prevent the ghosting issues seen on other cases. One thing I wish they changed was their logo placement; I think it interferes with the nice look of the HTC 10 with not only it’s size, but also the depth, and sheer in your face look it has once you see it.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports: All of the ports are aligned properly, and Incipio didn’t use the seemingly dumb cutout that Spigen has on their cases. Up top the headphone cutout isn’t large, but it will get the job done nonetheless. I haven’t experienced any issues fitting the stock cable, or any of my other USB-C ones that I have.
Volume/Power buttons: Incipio never has issues with their buttons, so I was happy to feel the ones on this case. All of the buttons are slightly raised giving them a easy to find feel. I don’t think anyone will have any issues with the buttons on this case.
Overall: 9/10 I love every part of this case with the exception of Incipio’s logo placement. It features great buttons, a nice frosted back section, and a unique style that makes it worth the ~$20-25 you will pay for it online or direct from Incipio.
Incipio Octane
Incipio NGP:
Given the lack of cases available for the HTC 10, I opted for another Incipio based on their track record. Even though Incipio’s selection isn’t great for this phone I wanted to try a different case from them this time: The Incipio NGP
There isn’t anything really special per say about this case other than it being my favorite TPU case (dethroning the Diztronic). Incipio opted for a harder TPU than what Diztronic or Spigen normally use; now, before you think to yourself how that might suck or be bad it’s a good move on their part. The TPU seems more scratch resistant so far, and honestly feels very similar to what Tech 21 uses in their EVO Frame case that I have for my S7 Edge. With that being said it resists scratches, fingerprints, and other dirt a whole lot better than the other two. I particularly like how there is a very subtle texture to the TPU giving it that more dare I say “premium” (even though I really don’t like how often that word is overused). I now wish I bought this case for my S7 Edge given how nice it feels in your hand followed by the good price for what it is. I know there are cheaper options out there, some of which are also great (Diztronic), but I doubt you will be disappointed with this case. There is also no dumb/obnoxious antenna cutout that Spigen seems to love putting on their cases. If I had to pick one thing I didn’t like it would be their logo placement on the back of the case. I would personally prefer a less invasive logo on the side, or a smaller one.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports: All of the ports are aligned properly, and Incipio didn’t use the seemingly dumb cutout that Spigen has on their cases. Up top the headphone cutout isn’t large, but it will get the job done nonetheless. I haven’t experienced any issues fitting the stock cable, or any of my other USB-C ones that I have given how large it is.
Volume/Power buttons: Excellent buttons overall on par with the Incipio Octane, Diztronic and Spigen cases. All of them are tactile, easy to find and smooth (for better or worse).
Overall: 9.25/10 Incipio nailed it with their NGP case for the HTC 10. The build, buttons, and feel are all top notch for this type of case only adding to how great it is. You don’t find this one scratching either, so that is another nice ‘feature’ to have if you would call it that. The buttons can be a little on the smooth side despite being easy to find, and the giant logo isn’t something I’m personally too fond of. Given how nice the case is I would definitely buy it again for any phone I own from here on out.
Incipio NGP
Spigen Ultra Hybrid:
There aren’t a whole lot of good clear cases on the market for phones lately. I’ve search for a long time to find one from a good manufacturer for each of my current phones (Nexus 6P, S7 Edge, HTC10), yet I always found the Ultra Hybrid to be one of the better ones out there. (The S7 Edge model had some issues). Spigen made the HTC10 version better than their previous ones, which is good news especially after how tightly the one for the S7 Edge fit causing it to interfere with the buttons functionality. Since I like using skins/wraps (SlickWraps/dbrand), I usually get a few clear cases to show off the phone in a unique way.
The Ultra Hybrid (UH) holds up to scratches well even though it will get small ones over time. There is a scratch resistant coating on the back, but not one on the inside. I would be careful wiping dirt out of the inside for this reason because I’ve scratched a few cases this way unfortunately. Spigen decided to make individual cutouts for the bottom firing speaker unlike Diztronic which just had one large cutout. I can’t say that I have a particular preference for either method, but I thought it would be useful to note the differences in these cases.
One thing that I will say for all 3 of my Spigen cases is that there is a very obscure large cutout along the top. I don’t know what purpose it serves, why they decided to include it, or if they will revise their case lineup and remove it. I emailed Spigen about the cutout earlier; as of writing this review I have not heard back from them. I think this HUGE cutout really detracts from otherwise good/great cases therefore making it very hard to recommend the cases until Spigen addresses this issue, or explains why it’s there.
Update: as @klarthur mentioned, the UH has a ghosting issue when the flash is used. I should have expected this given how close the cutout is to the flash coupled with a lack of black border around the cutout.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports:
The stock fits perfectly, without displacing the TPU like some other cases. I haven’t found any issues fitting the stock cable, or any of my other Type-C cables that I use for my Nexus 6P, so don’t let that discourage you. If you have large ‘studio’ style headphones with a massive aux cable you shouldn’t have any issues given the relatively large cutout on this case. It works fine with my Bose QC 20’s, Freestyles, OE’s, Samsung headphones, and some others I’ve tried. All microphone cutouts are also present.
Volume/Power buttons:
I was expecting better tactile feedback than I found on the Ultra Hybrid. The case makes the buttons feel slightly “mushy” compared to my other TPU cases. I really can’t stand when cases cause the button to no longer feel tactile because it ruins the overall experience of the phone. Buttons should always retain a tactile feel so they don’t further detract from how the phone should feel if it wasn’t in a case. I will update this section if the buttons beak in overtime, so let’s hope that happens.
Overall: 7/10
There are a few discrepancies with Spigen’s Ultra Hybrid case that will hopefully get fixed if they revise it. First, there’s the gigantic cutout along the top that serves no purpose that I could find as of writing this review. Secondly, the buttons lost their tactile feel in this case making the experience poor. I still like the look of this clear case despite it’s issues and will likely use it from time to time until a better clear one gets released. (Incipio Octane is enroute!) For right now I wouldn’t buy Spigen’s cases even with their sale given the odd cutout on them (thinfit is the exception).
Spigen Ultra Hybrid
Spigen Rugged Armor:
The Spigen Rugged Armor (RA) has been a staple case for each of my phones alongside some others since it first came out. The case has a nice look to it, but the size of carbon fiber on each case varies, as does their overall look. For example, my Nexus 6P version has a much smaller CF area, while my S7 Edge one has a huge one in comparison. Spigen decided to make the one on the HTC 10 version small, but I feel that a larger region would look better here. That’s my personal preference, and it doesn’t affect the quality of the case.
As far as the TPU goes, you will find a high quality near matte finish that wears off overtime as I’ve come to find out. I will post a picture below showing the case on all 3 of my phones. The Nexus 6P version is the oldest (bought it back in October), followed by my S7 Edge one. This should provide a good visual for what to expect overtime as you use the case. My Nexus 6P RA had the buttons wear overtime so they are no longer as tactile as they used to be using that case. I’m not sure if that will be a continued trend, but if my S7 Edge version gets the same issue, I will add a note here (that would imply the HTC 10 version would also have that issue).
I mentioned a rather odd issue in my Ultra Hybrid review, so here it is again:
There is a HUGE cutout along the top of the case that seems to serve no real purpose. I reached out to Spigen for comments, or clarification as to its purpose. I will add an update if I hear anything from Spigen, or elsewhere online.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports: The stock fits perfectly, without displacing the TPU like some other cases. I haven’t found any issues fitting the stock cable, or any of my other Type-C cables that I use for my Nexus 6P, so don’t let that discourage you. If you have large ‘studio’ style headphones with a massive aux cable you shouldn’t have any issues given the relatively large cutout on this case. It works fine with my Bose QC 20’s, Freestyles, OE’s, Samsung headphones, and some others I’ve tried. All microphone cutouts are also present.
Volume/Power buttons: All of the buttons have a nice tactile response to them that anyone could appreciate. One thing that makes this case stand out is how Spigen textured the power button to match what HTC did with the phone. This gives the case a unique feel more in line with what a good case should have.
Overall: 7/10
Given all of the nice attributes of the case, I’m questioning its longevity after experiencing other issues with my Nexus 6P one. I expect this one to encounter a similar issue with the buttons as it gets used more, although nothing is definitive yet. My other grievance is the large cutout along the top of the case. I think it impacts the cases ability to protect your HTC 10 in the even of a drop.
Spigen Rugged Armor
Spigen Thin Fit:
I appreciate the minimalist nature of thin fit cases, especially for bulkier phones like the HTC 10. The case features a metallic finish given the “gunmetal” color of this particular one. It feels like Spigen made this one slightly thicker than their other thin fit cases that I have for my Nexus 6P and S7 Edge, although I would need to measure it to confirm that. All of the cutouts are present, but I would have liked a little more room around the flash module given the cases reflective nature in this color scheme.
While the case is plastic, the back feels almost “rubbery” at times which is good. The last thing I want to happen is having my brand new HTC 10 fall on the ground. This case should have enough grip (not a lot, but enough for what it is) to prevent something that like for most people. On the top/bottom you will see a lip covering a very small amount of the otherwise open regions. This should also help out in the event of a fall, although I wouldn’t expect it to handle big drops well.
Spigen seems to have a very inconsistent way of making their thin fit cases in general. My S7 Edge one covers the top/bottom of the phone just like the one I had for my Nexus 6. Now, my Nexus 6P one is open at the top/bottom just like the HTC 10 is. I don’t know why they seem to have it open then covered more like the Ringke slim depending on the phone. I wish Spigen would just have it covered to give you more of a 360 degree side coverage in a slim package.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports: There should be absolutely no issues accessing the ports given how both the top and bottom of the case are completely open.
Volume/Power buttons: Spigen has large cutouts that are rounded at the edge to give you easy access to the buttons. I didn’t experience any issues using/finding the buttons.
Overall: 7/10
Spigen has been too inconsistent with their thin fit line to make it as appealing as it could be. The open top/bottom are not something I’ve particularly a fan of given the choice. I also did not like how Spigen had their cutouts on this particular case because it slightly distorts the flash unlike in an all-black one like the Rugged Armor. This is still one of the few slim cases out there, so if you can deal with the open top/bottom and potential flash issue depending on the color, than disregard what I said above.
Spigen Thin Fit
Supcase Beetle Pro:
Generally I'm not a huge fan of these "rugged" cases, but with the limited selection of HTC case I figured it wouldn't hurt to try out. First I wanted to say that I'm rather impressed with the build of this case which is on par with the slimmer version Supcase makes (not for the HTC 10 unfortunately). With the added heft you get a sense of comfort knowing that there's a very high chance your phone will survive most if not all large drops, falls, impacts etc. I didn't find the case too big personally, and the added holster is certainly a nice touch. One thing that I really don't like about this case is the build in screen protector. It has one of those awful dot matrix patterns to assist with touching the display given how there's an air gap between it and the screen. The fingerprint scanner cutout is also on the smaller side which caused some misreads for me compared to other cases. I also found that dust, hair, and other particulates loved making their way under the screen protector no matter how hard I tried to blow them out with a can of air before placing my phone in the case. Lastly, the bottom lip of the case makes it awkward to use the fingerprint scanner or buttons in general given how low HTC decided to place them.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports: There should be absolutely no issues accessing the ports given how both the top and bottom of the case are completely open. I've tested multiple cables without any issues; also my Shure SE215's, Bose QC20's, Bose Freestyle and all aux cables fit just fine despite the port covers/small port.
Volume/Power buttons: These are surprisingly tactile, even more so than a few of my other cases. I have absolutely no issue at all with them, plus they are raised ever so slightly to help you find them in a pinch.
Overall: 8.5/10 I am impressed with this case despite its few small drawbacks given how much protection you are getting out of it. The holster is also a nice addition that really completes the whole package and offers something different to your conventional "rugged" style case.
Supcase Beetle Pro
Mods: I'm reserving a few posts for pictures due to the large amount I plan to include for each case review. Please don't delete any of them because it makes life harder when things are scattered. Thank you in advance!
TUDIA:
I’ve owned many TUDIA cases dating back to my Nexus 6 a few years ago. All of those cases have been great, simple, and durable. I honestly think they fell short of their previous feel with this case. The case at first feels and looks nice, but don’t be fooled by the signature TUDIA styling, and nice look because this case has some serious flaws. My case has a ton of mold lines throughout that I somewhat reduced with an X-Acto knife before snapping the pictures. It shouldn’t be shipped looking like a factory second, yet it still was. Now, lets talk about their TPU; TUDIA went with the same material they have always used in my experience which is fine. The TPU is on the slicker side and seems to resist scratching better than Spigen’s Rugged Armor. Around the camera cutout there is a very sharp edge that is nearly translucent (about a 0.5mm section of it) that seems like it wasn’t supposed to be that thin.
I’m going to repeat some things here because there is only so much you can say about the port/headphone cutouts
Ports: All of the ports are aligned properly, and Incipio didn’t use the seemingly dumb cutout that Spigen has on their cases. Up top the headphone cutout isn’t large, but it will get the job done nonetheless. I haven’t experienced any issues fitting the stock cable, or any of my other USB-C ones that I have.
Volume/Power buttons: This is one of the areas where the case falls apart for me. The buttons are absolutely unusable and do not even budge even with a lot of effort. These are by far the worst buttons I’ve encountered in a while which says a lot. They are molded into the case in such a way as to not provide any movement (i.e. poorly designed). TUDIA did mark them so you can visible see what button is what not that it matters because you can’t press them with this case on. The HTC 10 has firmer buttons as it stands, so that added to the molded TUDIA buttons with no thinner section to allow them to slightly move kills this case. There’s a good reason many case manufactures always post about having responsible buttons (the good case manufactures that is) because it can make or break an otherwise decent/great case.
Overall: 5 /10 TUDIA fell short for me here in many ways: The first was the amount of mold marks, mold lines etc that were present on the case. Secondly their horrible excuse for buttons was the final nail in the coffin here because it renders the case unusable. I rarely rate a case at a 5 (or below), but it is well deserved in this instance.
TUDIA
Case Dimensions Table
Reserved 2
Reserved 3
Pilz said:
I'm what they call a casaholic, so I tend to accumulate a plethora of cases. I will post reviews of my cases below (some of you may have seen my other OP's in the S7 Edge and Nexus 6P forums). I will keep this OP updated with plenty of details over time.
So far my first batch of case reviews will include: Spigen Rugged Armor, Spigen Thin Fit, Spigen Ultra Hybrid, Diztronic TPU, and the Incipio Octane
My HTC10 isn't arriving until Tuesday, but I have all of the cases except the Incipio on hand right now. I will post the reviews promptly upon getting my phone so stay tuned!
Just a quick update: If anyone has any case suggestions, or reviews they would like to see, leave a comment below. I will have a look at each recommendation and decide if I will add a review for that particular case as I have done with my other phones.
Mods: I'm reserving a few posts for pictures due to the large amount I plan to include for each case review. Please don't delete any of them because it makes life harder when things are scattered. Thank you in advance!
Click to expand...
Click to collapse
I ordered the Ringke Oynx case from Amazon, but won't come til June sometime. Any experience of these cases on other phones?
Sent from my HTC 10 using XDA-Developers mobile app
c4llum said:
I ordered the Ringke Oynx case from Amazon, but won't come til June sometime. Any experience of these cases on other phones?
Click to expand...
Click to collapse
I had one for my S7 Edge but it arrived bent like a bananas. You can read my review if it via the S7 Edge case OP in my signature. I won't be buying another Oynx case from them, although u would like a Ringke Slim if they decide to make one.
Pilz said:
I had one for my S7 Edge but it arrived bent like a bananas. You can read my review if it via the S7 Edge case OP in my signature. I won't be buying another Oynx case from them, although u would like a Ringke Slim if they decide to make one.
Click to expand...
Click to collapse
surely the fact that it was bent was an accident not a standard feature! doesn't mean the case is bad necessarily...
Sent from my HTC 10 using XDA-Developers mobile app
c4llum said:
surely the fact that it was bent was an accident not a standard feature! doesn't mean the case is bad necessarily...
Click to expand...
Click to collapse
Well, the case wasn't exactly great if you read the review I wrote. I liked some aspects of it, but compared to some other ones I had it wasn't as good as it could be given Ringke's other products I own. I respect your opinion on the case, however, I just found the edges to be very sharp among the things I disliked. I own a lot of cases, and if one doesn't fit the bill or check all of the right boxes I will let people know. I try to be as unbiased as I can he to help people make choosing a case easier. I understand that sometimes I will write a review (rhino Shield bumper for the 6P) that a lot of people really disagreed with, yet thats the nature of different perspectives. I still hope to provide the best reviews that I can given the circumstances, so with that being said I will consider trying one for my HTC 10 when they eventually get released. I have 5 cases so far with many more planned to come once I get my phone. I was trying to see what Ringke had planned, but their website is down (product pages are showing an error message), so I'll just have to wait and see what gets released from other companies that I can add to my review OP.
HTC let me know today that my order won't ship until late June so I cancelled it in favor of waiting for T-Mobile assuming they will release it before then. I will wait until Friday before finding another place to buy one online so I can post the reviews.
If you have any questions, or suggestions that I could help with your welcome to ask away. I am still slighlty confused as to why Spigen has such large cutouts on the top of their cases, and I'm still awaiting their response to that question.
Stay tuned for some reviews tonight! My HTC10 is out for delivery, so I will post a few of my case reviews for everyone.
Out of these 4 cases that I have on hand which ones does everyone want to see first?
-Spigen Ultra Hybrid
-Spigen Rugged Armor
-Spigen thin fit
Diztronic TPU
Pilz said:
Stay tuned for some reviews tonight! My HTC10 is out for delivery, so I will post a few of my case reviews for everyone.
Out of these 4 cases that I have on hand which ones does everyone want to see first?
-Spigen Ultra Hybrid
-Spigen Rugged Armor
-Spigen thin fit
Diztronic TPU
Click to expand...
Click to collapse
They have all been reviewed for almost a week now. You may be a little late to the party......
Sent from my HTC6545LVW using Tapatalk
thegrants82 said:
They have all been reviewed for almost a week now. You may be a little late to the party......
Click to expand...
Click to collapse
I do things a little differently than most people. You can view my previous work (some of it at least) via my signature. I've been doing case reviews for the past few phones which are very popular, so I wanted to continue my detailed reviews to help members out.
Pilz said:
I do things a little differently than most people. You can view my previous work (some of it at least) via my signature. I've been doing case reviews for the past few phones which are very popular, so I wanted to continue my detailed reviews to help members out.
Click to expand...
Click to collapse
I have seen your reviews. Not too many different ways or styles to discuss a 10 dollar piece of plastic. Either way, have it at.
Sent from my HTC6545LVW using Tapatalk
thegrants82 said:
I have seen your reviews. Not too many different ways or styles to discuss a 10 dollar piece of plastic. Either way, have it at.
Click to expand...
Click to collapse
I'm always open to criticism, or comments so you can be the judge when I post them. If you don't like them it's okay with me
OP Updated
Reviews added:
-Diztronic TPU
-Spigen Ultra Hybrid
-Dimensions Table in post #2
Saw your reviews with the S7 Edge.
Some people might not be able to speak into detail about a $10 piece of plastic like you.
Really good man. So far I have all three Spigen cases. They are all lovely and can be used for different occasions.
How you liking the 10 compared to the S7E?
Sent from my HTC 10 using XDA-Developers mobile app
Jooosty said:
Saw your reviews with the S7 Edge.
Some people might not be able to speak into detail about a $10 piece of plastic like you.
Really good man. So far I have all three Spigen cases. They are all lovely and can be used for different occasions.
How you liking the 10 compared to the S7E?
Click to expand...
Click to collapse
Thank you, there is a lot that can be said if someone wants to
I like my Spigen cases too aside from the weird top cutout. I'll post the other two reviews tomorrow, and hopefully my other cases will start to trickle in.
I like the software better, but the camera is lacking a lot. My battery life has been mediocre too so far, but this is only day 1. I'm going to unlock my phone then root it before I decide on the performance and battery life. I hope HTC fixes the camera since that last update didn't help that much.
What kind of screen protector are you using for your phone?
napkun said:
What kind of screen protector are you using for your phone?
Click to expand...
Click to collapse
Spigen crystal film since I've heard a TGSP won't fit properly due to these 2.5D edge
I have seen reviews of the Spigen Ultra Hybrid that report ghosting when taking pictures with flash on, due to the clear case. Did you test that out by chance? If not, would you be able to? That would be a deal-breaker for me. Thank you for doing these!
klarthur said:
I have seen reviews of the Spigen Ultra Hybrid that report ghosting when taking pictures with flash on, due to the clear case. Did you test that out by chance? If not, would you be able to? That would be a deal-breaker for me. Thank you for doing these!
Click to expand...
Click to collapse
I have not tested it, but I will check for you. I might wait until it gets a little darker outside (or take one in a dark room) before checking to confirm that. I completely agree which is why I like how Incipio has a black border around their camera cutout. I will post a review of the Octane case when it arrives (should be great based on my S7 Edge version). If you have any other questions feel free to let me know. I enjoy helping people out, especially when it comes to accessories!
The kind people at Poetic have given me the opportunity to write a review for two of their cases. I must say, I’m pretty impressed. But if you know Poetic and the quality of their products then you know that’s not anything new. Let’s start with the Revolution Series, shall we?
Amazon Link - My Pics will be up this weekend
The front piece is made of plastic and has a built in screen protector. It sort of snaps onto the front of the phone and leaves the back exposed. And then there is the back piece that brings it all together. This piece is a TPU rubber that actually overlaps the front piece on the side of the phone. This brings the whole thing together in a nice protective package that is actually pretty easy on the eyes. The closest point of reference for this would be an Otterbox style case, but this is not… it’s Poetic. And it’s beautiful.
The quality of this case is pretty stellar to be honest. It’s not cheaply made by any means and I didn’t fear for my phone while this case was on it. While I did not do a drop test, I’m pretty confident this case would protect the phone for nearly any everyday drop. Obviously no one WANTS to drop their phone, but this case could take it if you did.
Opinion: The only improvement that I could see this case needing is the built in screen protector. Due to the type of plastic used on it, it gives a weird rainbow effect on parts of the screen. For most this won’t be a bother. Especially since you can’t see it while the screen is on. If you need an inexpensive, yet quality built rugged case, this will do the trick. It looks great on the phone and it feels great in the hand. Additionally, you can be confident your investment is protected, should you accidentally drop your phone.
And now the Affinity Series case… I am a little biased about this case, and you’ll see why in the photos attached.
Amazon Link - My photos attached to post
This is a one piece, hard TPU case that sort of snaps onto the phone. It’s very minimalist but still gets the job done at protecting your investment. I actually had a friend look at the phone with this case on it and he said, “Damn… This looks like it was designed to come on this phone from the factory.” Can we say OEM quality here?! The sides of the case are ribbed to prevent accidental slipping out of your hand. The case itself is 80-90% clear hard plastic with black accents. The black accents are really what pulls the design together on this case. The accents are raised ever so slightly from the clear to prevent it from becoming scratched and yes, it does an excellent job at that.
The designed quality on this case is like none other I’ve used. It is literally as if the mold is poured on the device and then peeled off. I doubt it’s done that way, but it is that snug and form fitting. That to me is quite refreshing in a world of cheaply made name brand knockoffs.
Opinion: I doubt this case will protect a device this large from a high drop. That’s not any fault of the case, but rather the large phone paired with a minimalist form fitting case. However, if you are like me and want something that will protect it from the everyday toss it on the table scenario, then this is for you. Very thin design that to me actually complements the phone’s design and the phone compliments the case design. I agree with what my friend said… It’s as if this case were designed specifically for this phone to be sold as a pair.
Final Thoughts: Both of these cases are great products. And yet again, Poetic knocks it out of the park with their innovative design and actually building a case around the phone so that they sort of meld as one unit. (That's an opinion of course) Hats off to you Poetic. I work in both Facilities and IT, and these cases are a godsend. Simply put… Poetic designs their cases with the user in mind. And to me, that’s everything. I highly recommend these cases to anyone!
If you have questions or would like better pictures, let me know. I'll answer as many as I can.
Also, I will choose someone at random and send them the Revolution case that I tried out! Free of charge of course!
*Yes it's been used. No it's not damaged in any way shape or form. Yes it will be free and I'll pay shipping.
Well I have to say that the quality of the Revolution case isn't bad, but it defiantly isn't as nice as the Supcase Unicorn Beetle Pro that I had for mu Note 7. I decided to return the Revolution, I personally didn't feel like it would survive a drop if one should occur. I ended up with a Otterbox Defender, I think that I'm one of the few that likes how much bulk it adds to the phone.
My side by sides of those two cases... As you can see, the clear TPU on the Affinity has started turning yellowish after only a few days of use. If you go with the Affinity, I recommend getting the black TPU. I ordered the clear because it was the only one that would've arrived the same day my phone did.
Sent from my LG-H910 using Tapatalk
@spydersilk has been chosen at Random. Spyder, if you want the case, it's yours. Just message me.
tribalartgod said:
The kind people at Poetic have given me the opportunity to write a review for two of their cases. I must say, I’m pretty impressed. But if you know Poetic and the quality of their products then you know that’s not anything new. Let’s start with the Revolution Series, shall we?
Amazon Link - My Pics will be up this weekend
The front piece is made of plastic and has a built in screen protector. It sort of snaps onto the front of the phone and leaves the back exposed. And then there is the back piece that brings it all together. This piece is a TPU rubber that actually overlaps the front piece on the side of the phone. This brings the whole thing together in a nice protective package that is actually pretty easy on the eyes. The closest point of reference for this would be an Otterbox style case, but this is not… it’s Poetic. And it’s beautiful.
The quality of this case is pretty stellar to be honest. It’s not cheaply made by any means and I didn’t fear for my phone while this case was on it. While I did not do a drop test, I’m pretty confident this case would protect the phone for nearly any everyday drop. Obviously no one WANTS to drop their phone, but this case could take it if you did.
Opinion: The only improvement that I could see this case needing is the built in screen protector. Due to the type of plastic used on it, it gives a weird rainbow effect on parts of the screen. For most this won’t be a bother. Especially since you can’t see it while the screen is on. If you need an inexpensive, yet quality built rugged case, this will do the trick. It looks great on the phone and it feels great in the hand. Additionally, you can be confident your investment is protected, should you accidentally drop your phone.
And now the Affinity Series case… I am a little biased about this case, and you’ll see why in the photos attached.
Amazon Link - My photos attached to post
This is a one piece, hard TPU case that sort of snaps onto the phone. It’s very minimalist but still gets the job done at protecting your investment. I actually had a friend look at the phone with this case on it and he said, “Damn… This looks like it was designed to come on this phone from the factory.” Can we say OEM quality here?! The sides of the case are ribbed to prevent accidental slipping out of your hand. The case itself is 80-90% clear hard plastic with black accents. The black accents are really what pulls the design together on this case. The accents are raised ever so slightly from the clear to prevent it from becoming scratched and yes, it does an excellent job at that.
The designed quality on this case is like none other I’ve used. It is literally as if the mold is poured on the device and then peeled off. I doubt it’s done that way, but it is that snug and form fitting. That to me is quite refreshing in a world of cheaply made name brand knockoffs.
Opinion: I doubt this case will protect a device this large from a high drop. That’s not any fault of the case, but rather the large phone paired with a minimalist form fitting case. However, if you are like me and want something that will protect it from the everyday toss it on the table scenario, then this is for you. Very thin design that to me actually complements the phone’s design and the phone compliments the case design. I agree with what my friend said… It’s as if this case were designed specifically for this phone to be sold as a pair.
Final Thoughts: Both of these cases are great products. And yet again, Poetic knocks it out of the park with their innovative design and actually building a case around the phone so that they sort of meld as one unit. (That's an opinion of course) Hats off to you Poetic. I work in both Facilities and IT, and these cases are a godsend. Simply put… Poetic designs their cases with the user in mind. And to me, that’s everything. I highly recommend these cases to anyone!
If you have questions or would like better pictures, let me know. I'll answer as many as I can.
Also, I will choose someone at random and send them the Revolution case that I tried out! Free of charge of course!
*Yes it's been used. No it's not damaged in any way shape or form. Yes it will be free and I'll pay shipping.
Click to expand...
Click to collapse
Your screen protector seems like it covers the whole screen which kind is it my I ask ...
Sent from my iPhone using Tapatalk
tribalartgod said:
The kind people at Poetic have given me the opportunity to write a review for two of their cases. I must say, I’m pretty impressed. But if you know Poetic and the quality of their products then you know that’s not anything new. Let’s start with the Revolution Series, shall we?
Amazon Link - My Pics will be up this weekend
The front piece is made of plastic and has a built in screen protector. It sort of snaps onto the front of the phone and leaves the back exposed. And then there is the back piece that brings it all together. This piece is a TPU rubber that actually overlaps the front piece on the side of the phone. This brings the whole thing together in a nice protective package that is actually pretty easy on the eyes. The closest point of reference for this would be an Otterbox style case, but this is not… it’s Poetic. And it’s beautiful.
The quality of this case is pretty stellar to be honest. It’s not cheaply made by any means and I didn’t fear for my phone while this case was on it. While I did not do a drop test, I’m pretty confident this case would protect the phone for nearly any everyday drop. Obviously no one WANTS to drop their phone, but this case could take it if you did.
Opinion: The only improvement that I could see this case needing is the built in screen protector. Due to the type of plastic used on it, it gives a weird rainbow effect on parts of the screen. For most this won’t be a bother. Especially since you can’t see it while the screen is on. If you need an inexpensive, yet quality built rugged case, this will do the trick. It looks great on the phone and it feels great in the hand. Additionally, you can be confident your investment is protected, should you accidentally drop your phone.
And now the Affinity Series case… I am a little biased about this case, and you’ll see why in the photos attached.
Amazon Link - My photos attached to post
This is a one piece, hard TPU case that sort of snaps onto the phone. It’s very minimalist but still gets the job done at protecting your investment. I actually had a friend look at the phone with this case on it and he said, “Damn… This looks like it was designed to come on this phone from the factory.” Can we say OEM quality here?! The sides of the case are ribbed to prevent accidental slipping out of your hand. The case itself is 80-90% clear hard plastic with black accents. The black accents are really what pulls the design together on this case. The accents are raised ever so slightly from the clear to prevent it from becoming scratched and yes, it does an excellent job at that.
The designed quality on this case is like none other I’ve used. It is literally as if the mold is poured on the device and then peeled off. I doubt it’s done that way, but it is that snug and form fitting. That to me is quite refreshing in a world of cheaply made name brand knockoffs.
Opinion: I doubt this case will protect a device this large from a high drop. That’s not any fault of the case, but rather the large phone paired with a minimalist form fitting case. However, if you are like me and want something that will protect it from the everyday toss it on the table scenario, then this is for you. Very thin design that to me actually complements the phone’s design and the phone compliments the case design. I agree with what my friend said… It’s as if this case were designed specifically for this phone to be sold as a pair.
Final Thoughts: Both of these cases are great products. And yet again, Poetic knocks it out of the park with their innovative design and actually building a case around the phone so that they sort of meld as one unit. (That's an opinion of course) Hats off to you Poetic. I work in both Facilities and IT, and these cases are a godsend. Simply put… Poetic designs their cases with the user in mind. And to me, that’s everything. I highly recommend these cases to anyone!
If you have questions or would like better pictures, let me know. I'll answer as many as I can.
Also, I will choose someone at random and send them the Revolution case that I tried out! Free of charge of course!
*Yes it's been used. No it's not damaged in any way shape or form. Yes it will be free and I'll pay shipping.
Click to expand...
Click to collapse
I just installed the Poetic Revolution, and I agree with your review. The thinner cases are still difficult to reliably grasp. I am hoping the case is as protective as it seems. The plastic screen protector is, well, not tempered glass- yet it offers decent protection. With the V20, there don''t appear to be any properly fitting glass protectors out yet. So plastic is the way to go. If that should change, then a lighter case with a glass protector would make sense for me.
Sent from my LG-H918 using Tapatalk
mobilecutzzfa said:
Your screen protector seems like it covers the whole screen which kind is it my I ask ...
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Sorry for the delay... I tried to use a tempered glass protector, but it had a halo effect... So what you are seeing is a naked screen. No screen protector at all. I'm only about a week in to no screen protector of any kind and I have not had any issues... If anything, the phone is actually a bit more appealing to the eye now...