can we activate social hub without flashing ?? in wave 1 with bada 1.2
i mean form stune or TkFileExplorer without flashing a new softwear
plzzzzz help me
Yes you can but you have to install your region code after... that will make a reset of your phone, like if you flash a firmware.
thx for reply
could you plzzz explane in steps what i do
my cod is (XSG)
THX AGAIN
some one tell me the steps plzzzzzzzzzzzzzzzzzzzzz
dude,
1. Speak Proper english
2. Use google. It is mentioned on sites how to do it.
my brother changed my bada v1.2 into 2.0...and i didn't like the surprise...i downloaded S8500XXJL2 but i have a gt s8530...it gives me dblk write error without the fota, and dbl erase when i include the fota...someone please help me...i need to revert this today please...T_T
Dude, is it so difficult to use a S8530 ROM? S8500-S8530 do you know the difference?
I hope your phone is not bricked yet.
Try this:
http://hotfile.com/dl/118911503/3ebf648/S8530XXKC1_OXAKC1.rar.html
This is Bada 1.2 Open Europe for Wave II
Otherwise: Happy JointTestActionGrouping
Good afternoon! I have a problem with my phone. I'm from Argentina and I am new to this. the problem I have is I can not move from Bada bada 2.0 to 1.2. The problem is that I have no signal bada 2.0. but when wanting to pass me da bada 1.2 ERROR ERASE: in BOOTLOADER, APPS - Rsrc1 and CSC. attempt to install over 10 firmware and could not always gives me this error. please if anyone knows help me thank you with all my heart! thank you! Greetings from Argentina!
Hello,
First of all check that if your phone is locked to your network Because if your phone is locked to your operator than you will not be able to use open region firmwares and you will not get any signal.So check and then update here so we can help you better.
If you bought your phone from Argentina, most likely it is s8500L.
So may be the problem is in the proper firmware.
If I'm right, you can get the right one from sammobile website:
http://www.sammobile.com/firmware/?page=3&t=1&o=2&m=GT-S8500L&r=6#regiona
Best Regards,
Nasko
The phone is released. I can put any firmware 1.2 and it takes me the signal. the problem is now 2.0, and bada got no signal I take what I want to do is re-bada 1.2 but will not let me, I get ERROR ERASE at the boot, apps, Rsrc1 and FOTA. and will not let me install any firmware Argentina (L) because it gives me this error. and more than 10 firmwares probe and 3 different computers and I get the same error .. you would know that this error or to fix it?. Thank you very much for your help!
Multiloader Version?
5.67 ?
Windows Version?
XP?
Win 7 ?
32 or 64...
Help us what you use, then we can maybe help you better.
Best Regards
Adfree good afternoon! thank you very much for your interest! I'm very glad that someone like you care and that help you much apresio his great knowledge.
and with this probe to flash with
Multiloader Version: 5.65 / 5.62
Windows Version: XP (SP1, SP2 and SP3) / Windows 7.
Since I tested with it and always says the same ... the only firmware that lets me flash is the bada 2.0 of "Fosamobi2012_S8500" of badadownload.
With this firmware does not take me CLEAR signal with the company.
I would again bada 1.2 but I get ERROR ERASE and will not let me go more. You've tried many firmwares and I do not install dea or FULL mode or in LOW mode.
AdFree please help! I trust you! From already thank you very much for your interest!
Sorry for my bad English, but I'm using a web translator.
elkpojlb said:
Adfree good afternoon! thank you very much for your interest! I'm very glad that someone like you care and that help you much apresio his great knowledge.
and with this probe to flash with
Multiloader Version: 5.65 / 5.62
Windows Version: XP (SP1, SP2 and SP3) / Windows 7.
Since I tested with it and always says the same ... the only firmware that lets me flash is the bada 2.0 of "Fosamobi2012_S8500" of badadownload.
With this firmware does not take me CLEAR signal with the company.
I would again bada 1.2 but I get ERROR ERASE and will not let me go more. You've tried many firmwares and I do not install dea or FULL mode or in LOW mode.
AdFree please help! I trust you! From already thank you very much for your interest!
Sorry for my bad English, but I'm using a web translator.
Click to expand...
Click to collapse
Try one of the indian firmware its a old firmware try ddjk3 from asian version. Use v5.65 of multiloader. And after a successfull flash just flash again the version u want. Please check boot change and full download. Don not tick master rom. See if this helps you this is tested by me as once the same problem happened to me.
Thanx
Thank you very much for your help but I can not fix the problem. try and feel the same. I can not go to 1.2 or 1.0 bada no longer do: (
I forgot to tell you that when I get the ERROR ERASE, cel look at the screen and says:
! ABNORMAL SW DETECTED!
UPGRADE ONLY!. "
That's a must or I have to do to fix it?.
Is it S8530 ?
if so - you can try this firmware
S8530XXJL2 ## 1.2 2010 December S8530OXAJK7 Open Europe Download
it's old one but great ... she helped me alot
if it still doesn't help - flash only the boot files - separately
let the device do restart and only reEnter download mode
and flash the other files ....
P.s very important - full download & LIS in multiloader
try to use ver 5.65 not the 5.67
make sure that your pc is not busy and that you have sufficient battery
Good Luck
This is S8500. and is loaded to the maximum (which is left over when flash bada 2.0) but I can not flash bada 1.2 and 1.0.
You've tried all the files separately by a full flash and low but the same thing. I always throw the same error. Multiolader already tested with 6.62 and 5.65 and the pc without aplicasiones open.
Probe with more than 10 firmwares and none let me.
adfree a question. is possible to merge the bada ams.bin 1.2 with 2.0?
Since doing that I think I may have a sign. I saw many users in Argentina had the problem of not having signal bada 2.0.
They are very different both AMS.bin?. merge is too complicated to operate the signal?
Thank you very much from now! Greetings friend!
I'm using only Multiloader 5.67 if I play with bada 2.0...
XP 32 bit
Also for downgrade from 2.0 to 1.x I use only 5.67 to prevent "funny" phenomenons...
Best Regards
I use multiloader v5.65 and it works flawlessly when i do upgrading or downgrading on bada 2.0. I am having windows 7 32 x86-32 bits.
So adfree i think its not mandatory to use only v5.67 infact v5.65 works better and error free. But may be different person have different choices
I had simmilar isue (exept signal problem) while tried to downgrade S8500OXAKK7 2.0 to original Croatian 1.2 S8500XXKF3_S8500OXFKA1_TRA.
1st I had to flash Arabic S8500JPJG2. Worked fine for me! All done with MultiLoader v.5.65
Maybe ...
Try to flash to original beta rom of bada 2.0
but an earlier ver like :
S8500XPKH1 ## 2.0 2011 August S8500OXAKH1 Open Europe
and than try to downgrade
hope it will work
i want to go back 2.0 to 1.2 !! that 2.0 version is my battery too much draining and heating it's'n't enough battery ..
i want to go back to 1.2 version
i'm trying to download hotfile server but it's server down
anyone have pls share :crying:
that file name is
CSC_S8530_India_ODD.csc
Need urgently .......waiting
S8530ddkb2
On badaforums.net your file is called:
S8530DDKB2 ## 1.2 CSC_S8530_India_ODD.csc 2011 February
Can be found here:
zip on 4shared
or here:
rar on depositfiles
I want samsung official firmware for GT-S8600
Hello Guys,
Can i get Samsung Firmware for Wave 3 S8600 for INDIA.
I have tried many links but cannot find a working link to download.
Thanks...
sammobile firmware
The downloads on sammobile.com are working for S8600, Indian too.
You have to sign up to get download links.
Thanks... now works Perfect
2nd link have password
but 1st link is fine
thanks a lot !!
password
Sorry, forgot to mention
The password for second link (dpositfiles) is samfirmware.com
So, this must be a sammobile file reupload :good:
hello, please i need a link to the firmware bada 1.2 XXJL2 / DBTJL2, if someone had, I would be very grateful, because now this firmware where you download it closed its pages(, 6 through him who leave me a link of the rom said previously
regards!!!!