Related
Hey guys, complete newbie to the Android scene. I have a Samsung Galaxy Tab 3 8.0 SM-T310, and I have it rooted. I installed the Kernel(http://forum.xda-developers.com/showthread.php?t=2455058) and Rom(http://forum.xda-developers.com/showthread.php?t=2471642) that Arshull made but don't really see any specific changes. My OS looks the same and I don't see any changes.
When I go to About Device I see that the Kernel version is "3.0.31GalaTab3_8.0_Kernel_v13.10.14-3-gd541fc6-dirty [email protected] #9 Mon Oct 14 23:04:24 EDT 2013"
When I go to About Device I see that the Build number is "GalaTab3_MH2-4.2.2_v13.10.4"
I rebooted into TWRP, did a backup, deleted delvik cache and cache, installed the zips that I downloaded for the OS and Kernel. Do I need other apps or am I doing something wrong?
scorpion1288 said:
Hey guys, complete newbie to the Android scene. I have a Samsung Galaxy Tab 3 8.0 SM-T310, and I have it rooted. I installed the Kernel(http://forum.xda-developers.com/showthread.php?t=2455058) and Rom(http://forum.xda-developers.com/showthread.php?t=2471642) that Arshull made but don't really see any specific changes. My OS looks the same and I don't see any changes.
When I go to About Device I see that the Kernel version is "3.0.31GalaTab3_8.0_Kernel_v13.10.14-3-gd541fc6-dirty [email protected] #9 Mon Oct 14 23:04:24 EDT 2013"
When I go to About Device I see that the Build number is "GalaTab3_MH2-4.2.2_v13.10.4"
I rebooted into TWRP, did a backup, deleted delvik cache and cache, installed the zips that I downloaded for the OS and Kernel. Do I need other apps or am I doing something wrong?
Click to expand...
Click to collapse
What exactly did you expect to see? The Rom you installed is a minimally changed stock-based Rom, so it will look the same.
Sent from my DROID RAZR MAXX HD
I expected to see changes, but it makes sense if it is based off the stock rom. However, I thought the Kernel was going to allow me to set power/performance settings?
You need to install a cpu control app.
Sent from my DROID RAZR MAXX HD
hi guys, i 've installed kernel for different type of my device and it was made my device can't read sim card, i used to be install for type sm-t310 (wifi only) and my device was sm-t311 (3g+wifi), can you guys help me to find stock kernel for my device (SM-T311) :crying:
Thank you and a few questions
gr8nole said:
You need to install a cpu control app.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Hi... I wanted to thank you very much for the work you and ketut.kumajaya put in on the blackhawk kernel 1.8. It is very much appreciated.
I take it that the 1.8 kernel allows frequency scaling... correct?
Is there any specific CPU control app you would recommend? I'm using the Galaxy Tab 3 7.0.
Does installing the 'disable Powerdeamon constraint' zip (thatnk you for that as well) allow changes made with a CPU controller to stick?
I guess I am trying to locate the governers and wonder if I'll have access to them via the CPU control app?
Sorry for the noob questions. I hope this is a better place to ask rather than in the development threads.
Thanks again
rdorje1 said:
Hi... I wanted to thank you very much for the work you and ketut.kumajaya put in on the blackhawk kernel 1.8. It is very much appreciated.
I take it that the 1.8 kernel allows frequency scaling... correct?
Is there any specific CPU control app you would recommend? I'm using the Galaxy Tab 3 7.0.
Does installing the 'disable Powerdeamon constraint' zip (thatnk you for that as well) allow changes made with a CPU controller to stick?
I guess I am trying to locate the governers and wonder if I'll have access to them via the CPU control app?
Sorry for the noob questions. I hope this is a better place to ask rather than in the development threads.
Thanks again
Click to expand...
Click to collapse
Trickster Mod cpu control app seems to work well. It will allow you to choose which governor you want to run and adjust min/max frequencies.
The settings will not stick unless you use the powerdaemon.disable mod.
Sent from my DROID RAZR MAXX HD
Thanks again. Trickster mod shows me all of the governors. Now to just decipher the parameters they use to control the CPU. In the past I've just used trial and error... But this is off topic... I just appreciate the advice
Regards
Ulfssar said:
hi guys, i 've installed kernel for different type of my device and it was made my device can't read sim card, i used to be install for type sm-t310 (wifi only) and my device was sm-t311 (3g+wifi), can you guys help me to find stock kernel for my device (SM-T311) :crying:
Click to expand...
Click to collapse
The kernel for device (sm-t311) can be found on this link (http://forum.xda-developers.com/showthread.php?t=2522091). Be sure to choose the kernel for your device (i.e. sm-t311 or sm-t31x). This is not a stock kernel but is better than the stock version.
Hello,
I done everything. Installed BUSYBOX Pro . Tried DSPLOIT, ZANTI, WI.CAP. Any sniffers do not work on my device .
It is ROOTED 4.4.2 kitkat flashed wtih werewolf custom rom.
Can anyone help me to run apps like this?
Gradz,
Head16
Head16 said:
Hello,
I done everything. Installed BUSYBOX Pro . Tried DSPLOIT, ZANTI, WI.CAP. Any sniffers do not work on my device .
It is ROOTED 4.4.2 kitkat flashed wtih werewolf custom rom.
Can anyone help me to run apps like this?
Gradz,
Head16
Click to expand...
Click to collapse
Dude, seriously? If you don't see what's wrong with your question then you shouldn't be playing
with those things. Lot's of reading and learning must you do, hmmm?
Yoda
okay, slightly dickish answer sorry.
you need certain abilities enabled at the kernel/driver level for some of the things you want
to do. which maybe be as relatively simple as patching kernel source and rebuilding or may require
rev-eng'ing proprietary drivers/binaries additionally.
you may be better served to researched a device more naturally endowed with these capabilities,
alternately a device with usb-otg support so you can use a dongle device proven to be
capable of these tasks.
ommmm
So because i used custom rom, this apps does not working?
Head16 said:
So because i used custom rom, this apps does not working?
Click to expand...
Click to collapse
sort of yes/no because the custom rom contains the software and the kernel is a custom build
it does not necessarily mean that your hardware is capable [meaning the device's capability, the kernel
having the necessary code and if there are proprietary/prebuilt source code unavailable/ binaries and firmware
support files which need to be hacked/engineered.
find out the device id of your wifi hardware and search it's id/name along with the function you are trying to perform.
for example
bcm4334 monitor mode
use the search engine that works for you, read carefully and fully and get yourself trained to follow trails of related/seemingly related
information, no matter how obscure.
good luck, may the schwartz be with you ! :silly:
m
Hi Guys,
I have a T705Y. Was wondering whether I have to flash stuff specific to the Y version (of which there doesn't appear to be much) or whether I can flash T705 stuff to it as well.
I did a quick search and couldn't find anything. Any help would be appreciated.
Thanks
D.S
Where did you get this one from? I'm not sure about flashing stuff on it because most roms and kernels are for the 705. Not sure if the 705 is compatible to the 700y. Is this also a Snapdragon or exynos?
Sent from SMT800 using Tapatalk.
-Helper around Tab S forums√
Active Everyday√
A carrier in Australia are giving them out in a bundle at the moment, my Nexus 7 just happened to break so it seemed to work out.
No idea if it's Exynos or Snapdragon, haven't looked that far into it yet. Was simply asking the question in the hopes that somebody had a quick answer.
It's not a big deal. Some more searching suggests that CF-AutoRoot works, which would probably be enough for me to be able to uninstall / freeze a lot of the chaff on the device.
Thanks
D.S
shaboogen said:
A carrier in Australia are giving them out in a bundle at the moment, my Nexus 7 just happened to break so it seemed to work out.
No idea if it's Exynos or Snapdragon, haven't looked that far into it yet. Was simply asking the question in the hopes that somebody had a quick answer.
It's not a big deal. Some more searching suggests that CF-AutoRoot works, which would probably be enough for me to be able to uninstall / freeze a lot of the chaff on the device.
Thanks
D.S
Click to expand...
Click to collapse
NZ and AU has same which is a Y and it's exynos...
I just got a new australian model sm- t705y. Has anyone flashed the taiwanese lollipop rom to it yet? Does it run good? Should i root before or after? I'm a newbie, thanks, Pet
Edit
I flashed the taiwanese lollipop rom with odin 3.09, it works beautiful, didn't need factory reset after, but it is specifically for the "y"-version of the sm-705. I am facing the same problem, don't know what the "y" means, except that it adds a certain bandwith for Australian 4G. I don't know if i can use stuff for normal sm- 705 or if that would cause problems. I will repost after trying, might take a while as i want to do a full backup first. If anyone has any clues regarding this issue i too would be very happy and
I too would be very very very interested in knowing this. Can't find any info on it other than a "maybe" from the Iron ROM creator.
The main reason I want it is because the Xposed framework doesn't work with current stock Samsung ROMs, yet there are no custom ROMs for the T705Y..
Has anyone taken the plunge and tried a custom T705 ROM on a T705Y??
FYI the T705Y is the Australian variant with 4G 700MHz band 28 for Aussie 4G. It has the Exynos 5 Octa 5420 (Adonis?)
..tempted to buy one with a broken screen just to try it but I don't have the money at the moment.
Sorry if double posting isn't allowed but just an update - I've tried deodexing so I can install Xposed but no luck - have gone through all the walkthroughs and troubleshooting I can find and after about 8 hrs total I've given up. I'll post back here if I get the balls to flash a T705 ROM or if I find a T705Y ROM that will allow Xposed.
crunt said:
Sorry if double posting isn't allowed but just an update - I've tried deodexing so I can install Xposed but no luck - have gone through all the walkthroughs and troubleshooting I can find and after about 8 hrs total I've given up. I'll post back here if I get the balls to flash a T705 ROM or if I find a T705Y ROM that will allow Xposed.
Click to expand...
Click to collapse
Why do you need balls? It's a simple case of making a backup with twrp first which is reiterated on this forum about a million times then just flash away.
As I understand it there is still a risk of a hard brick which means you can't get back into TWRP, unless I'm mistaken?
crunt said:
As I understand it there is still a risk of a hard brick which means you can't get back into TWRP, unless I'm mistaken?
Click to expand...
Click to collapse
Nope. I don't know of anyone that has hard bricked flashing stock firmware.
Just got a T705Y today....
crunt said:
I too would be very very very interested in knowing this. Can't find any info on it other than a "maybe" from the Iron ROM creator.
The main reason I want it is because the Xposed framework doesn't work with current stock Samsung ROMs, yet there are no custom ROMs for the T705Y..
Has anyone taken the plunge and tried a custom T705 ROM on a T705Y??
FYI the T705Y is the Australian variant with 4G 700MHz band 28 for Aussie 4G. It has the Exynos 5 Octa 5420 (Adonis?)
..tempted to buy one with a broken screen just to try it but I don't have the money at the moment.
Click to expand...
Click to collapse
used to have the T705 a long time back...went to the S2 T715...left that...got a great deal on T705Y practically new was sealed but sometimes wonder about those seals...anyway manufactured just in June this year...runs much better than T705 used to and guessing it is all software (has to be)..has 5.0.2 now (back then like a year back 4Q 2014 was kitkat and a horrible keyboard back then)...
checked that there is a s/w update of 212MB available not sure what that is for
in terms of the Y version...see the Sm-T235...I have that too (and had the Y version of that briefly...the Y version (also Taiwan) for the T235 there is identical to the non-Y version except for some LTE bands...same roms, recovery etc...can check the xda board tab 4 7.0..this is the LTE 235 I am referring to (now 230/231/237 differ) but Sm-t235 and 235y are basically identical. So here too, I think some frequencies are different (enabled bands but otherwise same)
by analogy I am pretty certain the 705 and 705Y have similar degree of similarity and differences like the 235 and 235y...if one can say that..just some bands on lte (235 has the 850, the 235Y has the 700 frequency for example)
ashyx said:
Nope. I don't know of anyone that has hard bricked flashing stock firmware.
Click to expand...
Click to collapse
Thanks ashyx but I am wanting to flash a custom ROM not stock, and for a slightly different model number. FWIW among other reasons I'm needing Xposed to turn off the magnet screen off feature which is sometimes triggered by my magnetic car cradle.
I think mac has answered my question will and confirmed what I suspected.
Thank you mac for sharing your experience :good:
crunt said:
Thanks ashyx but I am wanting to flash a custom ROM not stock, and for a slightly different model number. FWIW among other reasons I'm needing Xposed to turn off the magnet screen off feature which is sometimes triggered by my magnetic car cradle.
I think mac has answered my question will and confirmed what I suspected.
Thank you mac for sharing your experience :good:
Click to expand...
Click to collapse
Well just to let you know I have flashed countless custom roms on my t805. For quite a while I was using a custom t805y rom which ran very well with no issues. I also think there is a t705y version
http://forum.xda-developers.com/showthread.php?t=3127127
I now use PhoeniX ROM.
Pretty much any rom can run on these devices regardless of region.
The only thing is you may need to restore or flash the boot.img and modem for your particular device if you encounter issues.
I have only ever had to restore the modem.
Well i flashed t705 recovery yesterday and chaimsaw
Latest su2.62 that also works on t235 5.1.1...xposed running too
Sent from my SM-T705Y using XDA Free mobile app
Awesome thank you guys!
shaboogen said:
Hi Guys,
I have a T705Y. Was wondering whether I have to flash stuff specific to the Y version (of which there doesn't appear to be much) or whether I can flash T705 stuff to it as well.
I did a quick search and couldn't find anything. Any help would be appreciated.
Thanks
D.S
Click to expand...
Click to collapse
I have tried flashing SM-T705 rom onto my 705y model and it seems to work just fine. I used Odin to flash twrp then used twrp to install Lineage os 14.1 and the gapps ARM 7.1 FULL (a thread said only full version seems to work without errors I have not checked it).
ROM: [ROM][7.1.1][UNOFFICIAL] LineageOS 14.1 - SM-T705
you will find the link to the rom there
OK, hardware are very similar despite of the screen differences that can be adjust 12.2 instead of 10.1.
Resolution Is the same, processor is the same so I am trying to understand where are the blocks on the road. I am downloading the firmware but I don't know where to start. What are the real differences that make the firmware incompatible. The goal here is to have LL on the 10.1 2014 edition wifi. Am I loosing my free time?
Any ideas?
That would be great and highly appreciated. :good:
kornelius1982 said:
That would be great and highly appreciated. :good:
Click to expand...
Click to collapse
start from
http://forum.xda-developers.com/sit...pub-2900107662879704:4763122713&ie=ISO-8859-1
ask help from sktjdgns1189 and arter97
enotar said:
OK, hardware are very similar despite of the screen differences that can be adjust 12.2 instead of 10.1.
Resolution Is the same, processor is the same so I am trying to understand where are the blocks on the road. I am downloading the firmware but I don't know where to start. What are the real differences that make the firmware incompatible. The goal here is to have LL on the 10.1 2014 edition wifi. Am I loosing my free time?
Any ideas?
Click to expand...
Click to collapse
Maby you only need a Touchwiz 5.0.2 Kernel for SM-P600. I also tried to port such a ROM, but I failed with normal Methods. Black screen and a reeboot if I try to flash a rom from GalaxyTab S, if I flash another ROM for SM-P600 same issue. But with flashing the right Kernel, it works...
"Steps for android 4.4 and newer
Open dsixda's Android Kitchen
Decompile both boot.img/kernel
Open both init.environ.rc files
In CM/AOSP kernel replace BOOTCLASSPATH by the one from PORT boot.img ROM
In CM/AOSP kernel do these changes:
--> ro.secure=1 to ro.secure=0
--> ro.debuggable=0 to ro.debuggable=1
--> persist.sys.usb.config=mtp to persist.sys.usb.config=mtp,adb
--> ro.adb.secure=1 to ro.adb.secure=0
Save and recompile kernel
Use CM/AOSP modified kernel in your rom."
Compile a kernel almost all the effort (95)% to port a room.
Here´s the first thing we need to do.
http://forum.xda-developers.com/android/software/ultimate-guide-compile-android-kernel-t2871276
I´m downloading kernel source of sm-p901.
Here is the index sm-p900´s kernel sources:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SM-P90
wulkanat said:
Maby you only need a Touchwiz 5.0.2 Kernel for SM-P600. I also tried to port such a ROM, but I failed with normal Methods. Black screen and a reeboot if I try to flash a rom from GalaxyTab S, if I flash another ROM for SM-P600 same issue. But with flashing the right Kernel, it works...
"Steps for android 4.4 and newer
Open dsixda's Android Kitchen
Decompile both boot.img/kernel
Open both init.environ.rc files
In CM/AOSP kernel replace BOOTCLASSPATH by the one from PORT boot.img ROM
In CM/AOSP kernel do these changes:
--> ro.secure=1 to ro.secure=0
--> ro.debuggable=0 to ro.debuggable=1
--> persist.sys.usb.config=mtp to persist.sys.usb.config=mtp,adb
--> ro.adb.secure=1 to ro.adb.secure=0
Save and recompile kernel
Use CM/AOSP modified kernel in your rom."
Click to expand...
Click to collapse
Just dowloaded the P900 Rom and created the zip. I will take a look at kernel tomorrow. I didnt tweak the tom at all for now. Why matter and loose time before boot.
Edit: I am thinking of switching to T900 5.1.1 Rom just out to try this....
http://forum.xda-developers.com/gal.../t900xxuboh4-galaxy-tabpro-12-2-wifi-t3192933
Maybe with an existing P600 kernel, not sure.....
Sent from my SM-G920I using Tapatalk
If I may chime in; Is there a detailed list available of the hardware (sensor chips and stuff) in the p900 and p600. The kernel should be mostly identical except for some different kernel modules and perhaps the memory mapping towards the flash memory. Not sure about a needed bootloader change? Did anyone try booting with the p900 kernel yet? How would you go about testing it without a lollipop ROM the start on.. I have extensive knowledge on Linux on embedded platforms but nothing on android.. Mostly because there's no information available like datasheets and things like proprietary bootloaders and the lack of JTAG. Don't want to brick my device
enotar said:
Just dowloaded the P900 Rom and created the zip. I will take a look at kernel tomorrow. I didnt tweak the tom at all for now. Why matter and loose time before boot.
Edit: I am thinking of switching to T900 5.1.1 Rom just out to try this....
http://forum.xda-developers.com/gal.../t900xxuboh4-galaxy-tabpro-12-2-wifi-t3192933
Maybe with an existing P600 kernel, not sure.....
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
would be better to use the T900 Version with a existing Kernel (don't know if it works ). Just to have it more simple. If it does not work... we can use the P900 Version
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
Wbdsgnr said:
If I may chime in; Is there a detailed list available of the hardware (sensor chips and stuff) in the p900 and p600. The kernel should be mostly identical except for some different kernel modules and perhaps the memory mapping towards the flash memory. Not sure about a needed bootloader change? Did anyone try booting with the p900 kernel yet? How would you go about testing it without a lollipop ROM the start on.. I have extensive knowledge on Linux on embedded platforms but nothing on android.. Mostly because there's no information available like datasheets and things like proprietary bootloaders and the lack of JTAG. Don't want to brick my device
Click to expand...
Click to collapse
good idea, I will try to boot with T900 Kernel first (Firmware is downloading right now ), but I will also give the P900 Kernel a try, if the T900 Kernel does not work
Found this in a ROM in SM-P900 Forum:
"If you are on KitKat•Make a EFS backup
•Make a Nandroidbackup.
•Download rom and place on your ExternalSD.
•Flash the Lollipop bootloader before installing the rom ar it won't boot.
Here you find the Lollipop Bootloader and Odin package that you need to install it on your device when in download mode.
If you want to revert back to KitKat rom you need to install the kitkat bootloader! You find it here and you flash it with Odin.
•Full wipe is needed and now you can install the rom."
Maby the Bootloader is the Reason why it does not boot?
I don't think this is a good idea to flash T900 unchanged kernel, I am not sure you can come back to 4.4.2 or any okf the AOSP ROM or CM12.
enotar said:
I don't think this is a good idea to flash T900 unchanged kernel, I am not sure you can come back to 4.4.2 or any okf the AOSP ROM or CM12.
Click to expand...
Click to collapse
already tried it out with a Tab S ROM . And for now, (~10 sec left) i'm on KitKat back.
Did not work. But it was a try... so, black screen, and reboot. Kernel or bootloader? It does not Boot with ValexKernel too, but this is a AOSP kernel. (and yes, I'm back on Kitkat)
Good! So we need to modify kernel.
Sent from my SM-P600 using Tapatalk
enotar said:
Good! So we need to modify kernel.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
I have already a Ubuntu iso, so I will try to install it in VMware Which Kernel? from P900 or T900? I will try the P900, if there is no a reason why not.
I don't think this is a good idea to flash T900 unchanged kernel, I am not sure you can come back to 4.4.2 or any okf the AOSP ROM or CM12.
Click to expand...
Click to collapse
I think it's possible to just boot the kernel without flashing it, using fastboot. This would avoid the risk of getting stuck in some weird brick. The real problem here is the boot loader. I'm not sure wether the one from p900 is suitable.
P900 is 5.0.2 and T900 is 5.1.1 I am working on T900 myself but no succes so far.
Sent from my SM-G920I using Tapatalk
enotar said:
P900 is 5.0.2 and T900 is 5.1.1 I am working on T900 myself but no succes so far.
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
Nice!
Wbdsgnr said:
I think it's possible to just boot the kernel without flashing it, using fastboot. This would avoid the risk of getting stuck in some weird brick. The real problem here is the boot loader. I'm not sure wether the one from p900 is suitable.
Click to expand...
Click to collapse
The one who made the TW 5.0.2 ROM for SM-P605 just get it too...
I'm hoping the same that someone will port p900 to p600 as both are 99% identical. @enotar, I think T900 not a Note series Tab and doesn't have S-pen functionality. So, you might wanna try P900 rom.
T900 not a Note series !!!! doesn't have S-pen functionality
alex22280 said:
T900 not a Note series !!!! doesn't have S-pen functionality
Click to expand...
Click to collapse
Right but this is the least of our problem.
If we could boot something, we could star fixing things.
Sent from my SM-P600 using Tapatalk
enotar said:
Right but this is the least of our problem.
If we could boot something, we could star fixing things.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
ask for help from sktjdgns1189 ,Alan-B and arter97 (I am use a port 5.0.2 for my P605 from Alan - B)
for kernel ....arter97
Good day XDA!! This is my first ever post or thread on XDA, for about 5 years I have been a spectator to this site, and it has been an essential source for all things us android foondies want and need. But for the past month I have hit a blank when it comes to my new tab3 ve 7.0 sm-t116nq (goyave3g).
It started when I wanted to root it, little to no support for this model was available (at least through the search function) I managed to root through Kingo root on a pc. But now my dilemma is finding/porting rooms for this model. I have no problem with all my Mediatek androids, but I'm in the dark when it comes to samsung. I don't even know where to begin, for other popular Samsung's it's not a problem, obviously because they're popular.
SO, I need some help. I hate this abomination they call touchwiz, I want a vanilla aosp rom for this model, or even better CM or PAC-MAN rom!! I am prepaid to put a lot of time and effort into this. I have extremely limited experience, most of my past successes was actually the success of other xda members (you guys are awesome BTW.) Any info would be apriciated.
So let's revive this tablet and let's start a revolution for budget tablets.
Dudzzz576 said:
Good day XDA!! This is my first ever post or thread on XDA, for about 5 years I have been a spectator to this site, and it has been an essential source for all things us android foondies want and need. But for the past month I have hit a blank when it comes to my new tab3 ve 7.0 sm-t116nq (goyave3g).
It started when I wanted to root it, little to no support for this model was available (at least through the search function) I managed to root through Kingo root on a pc. But now my dilemma is finding/porting rooms for this model. I have no problem with all my Mediatek androids, but I'm in the dark when it comes to samsung. I don't even know where to begin, for other popular Samsung's it's not a problem, obviously because they're popular.
SO, I need some help. I hate this abomination they call touchwiz, I want a vanilla aosp rom for this model, or even better CM or PAC-MAN rom!! I am prepaid to put a lot of time and effort into this. I have extremely limited experience, most of my past successes was actually the success of other xda members (you guys are awesome BTW.) Any info would be apriciated.
So let's revive this tablet and let's start a revolution for budget tablets.
Click to expand...
Click to collapse
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Thunderoar said:
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Click to expand...
Click to collapse
Oh, such a good news, but tell me, will your cm support sm-t113 too bro?
x3m_zion said:
Oh, such a good news, but tell me, will your cm support sm-t113 too bro?
Click to expand...
Click to collapse
dont know, still testing
Thunderoar said:
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Click to expand...
Click to collapse
How is it going? Any news for us?
danny02 said:
How is it going? Any news for us?
Click to expand...
Click to collapse
i decided to suspend the project because of school though
Estamos presos no Android 4.4.4 =/
Maldito SM-T116BU
But is not there anyone interested in developing a rom with Lollipop for the SM t116? Hardware the device has, a Galaxy J1 mini has almost the same processed and less than 1gb of ram and it runs the Lollipop well
mmacedoc7 said:
But is not there anyone interested in developing a rom with Lollipop for the SM t116? Hardware the device has, a Galaxy J1 mini has almost the same processed and less than 1gb of ram and it runs the Lollipop well
Click to expand...
Click to collapse
hi! you can read here https://forum.xda-developers.com/galaxy-tab-3/development-7/rom-tab-3-lite-sm-t116-goyave-t3537793
pit file
Can anyone help me find pit file for galaxy sm-t116NU??????
OMG, Im also stuck here with SM-T116BU which was officially upgraded to Tab E (somehow) how it happened, i don't know since this was my son's Tab 3v originally.
lately. i have rooted tru inception (nice job for the rooting guys) then tried TWRP 3.1.1.0 but couldnt boot, down ver to TWRP 2.8.7.0 bcos the others are either not TAR for odin or files are missing to boot TWRP recovery.
so far, i have tried CM-13 but failed miserably, perhaps those files are corrupted as well
I enjoyed loading with my "Note3 with touchwiz" DO NOT TRY THIS UNLESS YOU KNOW HOW TO RECOVER, so i tried using the same ROM N9005_TouchWizMM_V4_16-04-2016. installation smoothly with TWRP into TAB E but could NOT make it BOOT.
I guess some files are missing while downloading those as well or those files have been corrupted thru the years.
N9005_TouchWizMM_V4_16-04-2016 not difficult to find but NEED an expert to cook a SM-116 version since this is best "complete" ROM (need kernel) in my Note3 now
I'll keep trying ROM N9005_TouchWizMM_V4_16-04-2016 into THIS TAB E and mixed with SM_116 kernels n I KNOW I MIGHT BRICK THIS SM-116 Tab E, what the HACK so let it be, NO VENTURE NO GAIN hahahaaa
deranche said:
OMG, Im also stuck here with SM-T116BU which was officially upgraded to Tab E (somehow) how it happened, i don't know since this was my son's Tab 3v originally.
lately. i have rooted tru inception (nice job for the rooting guys) then tried TWRP 3.1.1.0 but couldnt boot, down ver to TWRP 2.8.7.0 bcos the others are either not TAR for odin or files are missing to boot TWRP recovery.
so far, i have tried CM-13 but failed miserably, perhaps those files are corrupted as well
I enjoyed loading with my "Note3 with touchwiz" DO NOT TRY THIS UNLESS YOU KNOW HOW TO RECOVER, so i tried using the same ROM N9005_TouchWizMM_V4_16-04-2016. installation smoothly with TWRP into TAB E but could NOT make it BOOT.
I guess some files are missing while downloading those as well or those files have been corrupted thru the years.
N9005_TouchWizMM_V4_16-04-2016 not difficult to find but NEED an expert to cook a SM-116 version since this is best "complete" ROM (need kernel) in my Note3 now
I'll keep trying ROM N9005_TouchWizMM_V4_16-04-2016 into THIS TAB E and mixed with SM_116 kernels n I KNOW I MIGHT BRICK THIS SM-116 Tab E, what the HACK so let it be, NO VENTURE NO GAIN hahahaaa
Click to expand...
Click to collapse
What exactly are you trying to do?
Well. The TouchWiz works perfectly on my note3 so I'll try to cook a TouchWiz for Sm-t116 from the note3 platform. If u have ready ROM, do send them. Tks in advance !
Ps. Out of town next few days ??
deranche said:
Well. The TouchWiz works perfectly on my note3 so I'll try to cook a TouchWiz for Sm-t116 from the note3 platform. If u have ready ROM, do send them. Tks in advance !
Ps. Out of town next few days
Click to expand...
Click to collapse
Guys please give the firmware rom for TVRP on the TAB-3 Lite SM-T116 ! Cause when I for some reason flashed TVPP I realized that there are no custom firmwares for this device , But I need 100% working FI-WI, and cyanogen mod does not fit, cause Wi-Fi doesn't work there!