[UPDATE] PROBLEM SOLVED! I FINALLY GOT ODIN TO PROCESS SUCCESSFUL!!!
I'm using ODIN v1.85 to restore my Sprint Samsung Galaxy (SPH-L700) to stock before returning it to Sprint.
I've had a lot of trouble getting to this point after experiencing problems and ending up soft-bricked or stuck in DOWNLOAD mode following the use of the Nexus Root Toolkit by WugFresh.
I'm still connected to ODIN, and the Message section reads:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialization..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img..
<ID:0/005> NAND Write Start!!
<ID:0/005> system.img
<ID:0/005> userdata.img
And that's it. ODIN has been stalled at the userdata.img for about 20 minutes.
Is this normal or is there a problem?
What happens if I disconnect or pull the battery?
I've noticed that my message box lacks a few message that others are seeing like "DO NOT TURN OFF TARGET" and "bootloader.img".
Related
Please be gentle; I'm new.
See the following:
THIS IS WHAT I GOT WHEN I FLASHED THE STOCK KERNEL<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
THIS IS WHAT I GET EVERY FREAKIN TIME I TRY TO GO BACK TO STOCK USING
SPH-D700-DG27-8Gb-REL.tar<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> boot.bin
<ID:0/005> recovery.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do anymore :-( I'm at a loss. I've read all the posts; I've read all the tricks; and nada. I can't even access the recovery module in my phone. The only thing I can access is the download screen (1 + power button). The (volume down + camera + power button) stopped working. All I get when I press the power button is the Samsung Logo and that's it. I've changed usb ports, I've restarted the computer and phone, I've tried using different odin versions and in different windows settings (ie XP SP 2, Admin etc).
Is there anyone out there who can help me save a $100 bucks?
Thanks
-CNT
FYI: I use to have the Viperrom Trinity v3.0.3 and even the ViperROM [TRiNiTY v2.0] EXT4-RFS Dual DK28 4.0.4 at one point. <sigh>
This is a question, so it should go int the q&a section, not development.
As long as you can get into download mode you should still be able to recover the phone.
I think there's an official sprint updater somewhere you can try using instead of ODIN that might help...
You might try a different computer. Install the Galaxy S drivers, and use Odin there...
Moved to Q&A.
I would try Odin'ing to EB13 prerooted with CWM3 so you can put on any ROM after that from the link here:
http://forum.xda-developers.com/showthread.php?t=853209
Use the second one down for CWM3.
its stuck here
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.rfs
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> datafs.rfs
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> factoryfs.rfs
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
what do i do?
What are you flashing? I would say use another cable, but your past the point of a cable not working. I would suggest hitting repartition, set the pit with the victory pit file, Odin EC05, see if that works, if so go from there.
Can u still get into download mode. I had that issue earlier tonight. All I did was close Odin then unplug then took the battery and SD card out plugged my phone in with no battery and SD card hit 1 and power button at the same time and download mode came up. So I flashed back to stock ec05 and reroot and back on cm7.
Sent from my SPH-D700 using XDA Premium App
was doing EG22 and it just now failed now i cant boot
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.rfs
<ID:0/005> datafs.rfs
<ID:0/005> Removed!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
got it now
wj0t said:
got it now
Click to expand...
Click to collapse
Ok good. Glad it worked
Sent from my SPH-D700 using XDA Premium App
Hello, I'm a Noob to phone recovery and I think I've bitten off more than I can chew.
So I usually use a T mobile Galaxy S II but I wanted to upgrade to a Note II. My Flash -addicted friend gave me one that he believed he had "Bricked" beyond repair, but after reading around the forums I found that where there is Odin there is a way, I said I would try to recover it.
Well I'm not getting anywhere:crying: . on the Note II it shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
And on Odin 3.7 I keep getting:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I rebooted and retried and I got:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping...
and it hung there for the better par of the day.
I have a pit file I got from http://forum.xda-developers.com/showthread.php?t=2071403 and I have used multiple roms. I have tried clicking and unclicking re partition. I Have only Odin Mode, no recovery, and when I boot it on, it does not move pass the Samsung Galaxy Note II screen; no Android,no anything. I am also working on a Windows 7 Home Edition Laptop. I have a totally unrooted , straight from T mo Galaxy 2 that works perfectly at hand I can use to "copy" (It's my roommates) but I just needs some direction as to how.
Again , I am new to this and I apologize if this is a duplication. If there are answers in other forums, please link them here for me please. Thanks for all the time and direction in advance!
Cheshire_Ci86 said:
Hello, I'm a Noob to phone recovery and I think I've bitten off more than I can chew.
So I usually use a T mobile Galaxy S II but I wanted to upgrade to a Note II. My Flash -addicted friend gave me one that he believed he had "Bricked" beyond repair, but after reading around the forums I found that where there is Odin there is a way, I said I would try to recover it.
Well I'm not getting anywhere:crying: . on the Note II it shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
And on Odin 3.7 I keep getting:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I rebooted and retried and I got:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping...
and it hung there for the better par of the day.
I have a pit file I got from http://forum.xda-developers.com/showthread.php?t=2071403 and I have used multiple roms. I have tried clicking and unclicking re partition. I Have only Odin Mode, no recovery, and when I boot it on, it does not move pass the Samsung Galaxy Note II screen; no Android,no anything. I am also working on a Windows 7 Home Edition Laptop. I have a totally unrooted , straight from T mo Galaxy 2 that works perfectly at hand I can use to "copy" (It's my roommates) but I just needs some direction as to how.
Again , I am new to this and I apologize if this is a duplication. If there are answers in other forums, please link them here for me please. Thanks for all the time and direction in advance!
Click to expand...
Click to collapse
did u ever get the pit file?
I don't know if it matters or not, but I think you should use Odin ver.1.85.
If I'm wrong, somebody please correct me.
Sent from my SGH-T889 using xda premium
Hello everyone.
Recently I flashed the Note4Mini Rom available here in the forum. I really like it. Only had a couple of minor issues, however it had a huge issue for me: I couldn't play Hearthstone with it.
So I decided to flash back to the Stock Rom. I downloaded the Portuguese version for my Smartphone (SM-N7505), since I am Portuguese, but when I try to flash it via Odin this is my log file.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And I get the error saying that there was a problem flashing the software and to connect to kies and do the phone recovery thingy. That doesn't work. Kies does not detect the phone (Yes, I installed the drivers and tried both Kies2 and Kies3 and I'm running everything as admin)
Any help will be appreciated I kinda need the phone. I also had it rooted and TWRP installed. I don't know if I still have it after trying to flash the stock ROM but I can't access it anyway.
Cheers.
Quaekk said:
Hello everyone.
Recently I flashed the Note4Mini Rom available here in the forum. I really like it. Only had a couple of minor issues, however it had a huge issue for me: I couldn't play Hearthstone with it.
So I decided to flash back to the Stock Rom. I downloaded the Portuguese version for my Smartphone (SM-N7505), since I am Portuguese, but when I try to flash it via Odin this is my log file.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And I get the error saying that there was a problem flashing the software and to connect to kies and do the phone recovery thingy. That doesn't work. Kies does not detect the phone (Yes, I installed the drivers and tried both Kies2 and Kies3 and I'm running everything as admin)
Any help will be appreciated I kinda need the phone. I also had it rooted and TWRP installed. I don't know if I still have it after trying to flash the stock ROM but I can't access it anyway.
Cheers.
Click to expand...
Click to collapse
Check whether you are trying to install a downgraded firmware. It will not allow you to downgrade your firmware.
Ok I solved it. I flashed TWRP using odin and it worked and then the phone rebooted into TWRP and showed an error ( which I couldn't read because it was too fast) and then booted into a fully working android (The ROM I was trying to flash). The phone is now 100% working. Thanks for the help anyway.
Actually this issue happen from latest 10 FW, I always flash custom recovery or root to solve it.
Hope someone can assist here, feel like I have tried everything, and cannot get the issue resolved. Have spent 10+ hours, but many of the resources are outdated, or the links are no longer valid for downloads - understandable since a 6 year old device.
Took out my T320 after a while, and figured I would use it, turns out still on KitKat, so not much you can do with it. Figured I'd root, then flash Colt or Lineage on the Tab Pro.
Root was successful, TWRP recovery was successful as well, but then the flash was not working and caused a bootloop issue. Long story short, I am only able to get into Download mode, and unable to flash the stock US firmware, because I cannot find a working link anywhere.
ODIN allows me to flash BL, but get the error below when I select a tar to flash in the AP. Hope someone knows what the export below could point to as to why I cannot flash Lineage or Colt.
First part is for the BL - which is successful, second one is the ROM, which is a fail.
Nutshell -
Bootloop but able to get into Download mode
Cannot access Recovery
Kies does not recognize but ODIN does
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> PK
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@xcobrax81 as you don't have the firmware yet try samfirm_reborn tool.
Search for it, doesn't have to be installed.
I guess you can take the canadian version, but I'm not sure as I live in Europe.
Get rid of Kies IMO it causes to much problems, just use Samsungs USB device drivers instead. That's what I do and it works fine.
Don't understand which ROM you were trying to flash with Odin as you said you don't have stock firmware.
Any custom ROM can only be flashed via TWRP.
Btw, which one did you try?
On my T325 I use 3.4.0-0.
bmwdroid said:
@xcobrax81 as you don't have the firmware yet try samfirm_reborn tool.
Search for it, doesn't have to be installed.
I guess you can take the canadian version, but I'm not sure as I live in Europe.
Get rid of Kies IMO it causes to much problems, just use Samsungs USB device drivers instead. That's what I do and it works fine.
Don't understand which ROM you were trying to flash with Odin as you said you don't have stock firmware.
Any custom ROM can only be flashed via TWRP.
Btw, which one did you try?
On my T325 I use 3.4.0-0.
Click to expand...
Click to collapse
Thanks for the guidance, I'll try that this week. Tried Colt and Lucid (the top 2 I found on this forum)
But I think it's more me than any issues with the ROMs