Hi everyone
I've tried every thing : tool kit 3 => several version of recovery : CWM, TWRP, installed with Odin (Pass/ RESET : ok). But i'm still boot my recovery to "android system recovery 3e" (cf pic), I can't reach CWM or TWRP : //
I pull off bettery, but till the same way.
Anyone can help me ? Thank's
-----------------------------------
I'm using Galaxy Note 2 GT N7100
4.1.2
Revert back to recovery problem
hazzel said:
Hi everyone
I've tried every thing : tool kit 3 => several version of recovery : CWM, TWRP, installed with Odin (Pass/ RESET : ok). But i'm still boot my recovery to "android system recovery 3e" (cf pic), I can't reach CWM or TWRP : //
I pull off bettery, but till the same way.
Anyone can help me ? Thank's
-----------------------------------
I'm using Galaxy Note 2 GT N7100
4.1.2
Click to expand...
Click to collapse
Having same issue with SGH-T889. Any help? Heard of similar issue with Nexus 4. They have revert recovery disabler. Not tried on my Note 2. Is similar solution available for T889?
After flashing recovery in Odin are you booting up the phone (or is odin - i.e. auto reboot is checked)? There is a file (/system/etc/install-recovery.sh) that you need to disable to have recovery "stick". There are a few ways to do this, but my preference has been to do it within cwm/twrp recovery via adb after flashing in odin but prior to first bootup of phone.
Hope that helps!
Ive had luck un-checking auto-reboot in odin, flashing recovery, wait for it to say pass, unplug USB, pull battery, and boot straight into recovery by holding home + vol up when powering on.
This can be dangerous so make sure odin is completely done before unplugging.
Sent from my GT-N7105 using Tapatalk 2
^^ this
same prob
hazzel said:
Hi everyone
I've tried every thing : tool kit 3 => several version of recovery : CWM, TWRP, installed with Odin (Pass/ RESET : ok). But i'm still boot my recovery to "android system recovery 3e" (cf pic), I can't reach CWM or TWRP : //
I pull off bettery, but till the same way.
-----------------------------------
I'm using Galaxy Note 2 GT N7100
4.1.2
Click to expand...
Click to collapse
I have the same problem :/ i tried going back to odin and unchecking auto root as suggested, but whenever i clicked start it just stayed stuck at "Setup Connection" or whatever... i'm trying to install a custom rom and i just cant access CMW! I have the AT&T model by the way.
Nintendoassasin64 said:
I have the same problem :/ i tried going back to odin and unchecking auto root as suggested, but whenever i clicked start it just stayed stuck at "Setup Connection" or whatever... i'm trying to install a custom rom and i just cant access CMW! I have the AT&T model by the way.
Click to expand...
Click to collapse
I know you can't access CWM Recovery..
Allot of us use TWRP Recovery and it works great. I think it is safe to say it is a Superior Recovery now. I suggest you use that Recovery.
You can get it installed easily by downloading GooManager from the play store, opening the app, hit your menu button and tap Install Open Recovery Script. That's it. Quick and easy!
For the people having a hard time, are you rooted? If you are just download goomanager and use it to install twrp
Sent from my SGH-T889 using xda app-developers app
Finally got fixed
I tried by un ticking the "Reboot" in Odni and manually pulled out battery and cable and tried Recovery mode... it went smoothly as expected... thanks dude
This works when everything else fails!
dj_spore said:
Ive had luck un-checking auto-reboot in odin, flashing recovery, wait for it to say pass, unplug USB, pull battery, and boot straight into recovery by holding home + vol up when powering on.
This can be dangerous so make sure odin is completely done before unplugging.
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Been looking for a solution for hours and the android system recovery was feeling like a thorn in the foot that will never go away. But surprise, surprise, your simple suggestion did the trick!
Thanks a ton!! :good:
My Galaxy W got stocked .. after flashing 3 Cyanogen Mod ROMs ..i tried to flash my phone back into GingerBread ( STOCK ROM ) but my phone stocked in SAMSUNG LOGO..
i need .pit File to recover my phone..
dodskie90 said:
My Galaxy W got stocked .. after flashing 3 Cyanogen Mod ROMs ..i tried to flash my phone back into GingerBread ( STOCK ROM ) but my phone stocked in SAMSUNG LOGO..
i need .pit File to recover my phone..
Click to expand...
Click to collapse
Have you wipe data in recovery mode?
Sent from my GT-I8150 using xda premium
We need more info before we can get help. Tell us you're phone model number, how it got this way, what you did in Odin/Heimdall and how you flashed it.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
eza azami said:
Have you wipe data in recovery mode?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
YES @eza azami..everytime i proceed flashing any ROM i wipe data/factory reset..
i flashed 3 Custom ROMS ..but after that my 3G/GPRS won't work..
and then i decided to Flash back into GingerBread (or STOCK ROM for my Galxy W GT-I8150)
i used ODIN 4.43 , and Ancora.ops and the package file that i downloaded in samsung-updates.com
but after flashing, my phone got stocked in SAMSUNG LOGO and no recovery mode..
dodskie90 said:
i flashed 3 Custom ROMS ..but after that my 3G/GPRS won't work..
and then i decided to Flash back into GingerBread (or STOCK ROM for my Galxy W GT-I8150)
i used ODIN 4.43 , and Ancora.ops and the package file that i downloaded in samsung-updates.com
but after flashing, my phone got stocked in SAMSUNG LOGO and no recovery mode..
Click to expand...
Click to collapse
If you don't know what you're doing, don't do it! Ask before you do it.
Follow the tutorial below to unbrick your phone.
Enter CWM (press and hold Home + Volume Up + Power button, when the Samsung logo appears, release the Power button and keep pressing Home + Volume Up buttons) and:
select "clear data/factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
restart into Download mode (restart, press and hold Home + Volume Down + Power buttons)
flash Samsung stock ROM via ODIN Multidownloader
reboot your phone (it will probably automatically reboot anyway after ODIN finishes flashing the stock ROM)
Oh, and by the way, if you would have followed this tutorial when flashing those 3 custom ROMs, your 3G connectivity might have worked and you wouldn't have gotten into this kind of troubles by trying to flash stock ROM over custom ROM without wiping the most important component of any ROM (the /system folder!).
I rooted the phone, downloaded andromizer, curious on the LCD density tweak, set the lcd density to 380, phone booted, then it stuck on samsung logo. Went to dev mode (volume down), did wipe and factory reset and it went into a series of process up untill "installing applications" with progress bar underneat, and it does nothing and keeps on restarting. Last time I checked memory with emmc check, brick bugs is no, sane chip.
What should I do? I tried flash with Odin, it was successful. But still it rebooted then stuck on installing applications then it reboots few times but "installing applications" are still there
Please help
isutrisno said:
I rooted the phone, downloaded andromizer, curious on the LCD density tweak, set the lcd density to 380, phone booted, then it stuck on samsung logo. Went to dev mode (volume down), did wipe and factory reset and it went into a series of process up untill "installing applications" with progress bar underneat, and it does nothing and keeps on restarting. Last time I checked memory with emmc check, brick bugs is no, sane chip.
What should I do? I tried flash with Odin, it was successful. But still it rebooted then stuck on installing applications then it reboots few times but "installing applications" are still there
Please help
Click to expand...
Click to collapse
flash philz and clean wipe the system,data,cache and dalvik or rather use super clean/wipe http://d-h.st/fWr then try installing a custom rom
How? The phone is dead? You mean install on pc?
sorry I am a noob can you please be more specific on how to? sorry:crying:
Ok I found how to install Philz Touch using odin3, I made into CWM and as phil instruction I rebooted with disable flash recovery option, the phone still goes into "installing applications" with no progress on the progress bar BUT it keeps on restarting? Is this a good sign? Does it mean it is installing stuff?? I have waited for like 15 minutes and it keeps doing that, installing applications and rebooting... Omg I am so stressed out
isutrisno said:
Ok I found how to install Philz Touch using odin3, I made into CWM and as phil instruction I rebooted with disable flash recovery option, the phone still goes into "installing applications" with no progress on the progress bar BUT it keeps on restarting? Is this a good sign? Does it mean it is installing stuff?? I have waited for like 15 minutes and it keeps doing that, installing applications and rebooting... Omg I am so stressed out
Click to expand...
Click to collapse
Relax mate
if u have successully installed philz recovery then sw of ur phone and press vol. up + home + power button. u will be in the recovery then.
select wipe data / factory reset then clean to install a new rom. select yes
it will clean ur rom for any conflicts with the old rom
after than flash a new rom
search for hurricane rom v5 which is nicely built and having latest version.
download and copy to ur sd card .
then from secovery select install zip
select hurricane rom and it will start the aroma installer .
finish everything and reboot
then the phone should boot successfully.
hope it helps
june14 said:
Relax mate
if u have successully installed philz recovery then sw of ur phone and press vol. up + home + power button. u will be in the recovery then.
select wipe data / factory reset then clean to install a new rom. select yes
it will clean ur rom for any conflicts with the old rom
after than flash a new rom
search for hurricane rom v5 which is nicely built and having latest version.
download and copy to ur sd card .
then from secovery select install zip
select hurricane rom and it will start the aroma installer .
finish everything and reboot
then the phone should boot successfully.
hope it helps
Click to expand...
Click to collapse
Oh wow, it does helpppppp omg thannnnkkkss!!!
I own a Samsung Galaxy Grand duos GT - I9082, running on CM 11, PHILZ 6.0.4.5 Recovery, I used Solo launcher as default, now its not getting out of it,My concern is now I am not able to go to stock, I have tried flashing JB 4.1.2 tar.md5 file thru odin 3.07, One thing I am noticing while flashing in odin is it says not responding until the file appears in the pda box, after that every thing works fine, pass msg comes on the screen, but after that it re-boots to the same CM 11, I have also tried doing factory reset, cache & dalvik cache wipe after the flashing, but it never comes back to stock. I am even trying to flash the selinux support recovery, but the same thing happens, after odin pass msg, if i check the recovery its the same PHILZ 6.0.4.5 Recovery. I am really worried that has my phone been bricked.
I have even tried doing format/system, factory reset, cache & Dalvik wipe. usb debugging is selected in the developer section. Can i get the original stock flashed from the samsung ? pls help asap, thank you.
Strange. Have you tried flashing stock 4.2.2?
naufalhadyan said:
Strange. Have you tried flashing stock 4.2.2?
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------
yeah but in vain, same prob exists ?
nandaleo72 said:
---------------------------------------------------------------------------------------------------------------------------------------
yeah but in vain, same prob exists ?
Click to expand...
Click to collapse
If you still can't get to stock it means Odin hasn't even downloaded the firmware into the device. Could be hardware problem (check your USB cable) driver installation (make sure you installed the drivers correctly) or you simply didn't follow the correct procedure.
http://forum.xda-developers.com/showthread.php?t=2616816
Btw, it helps if you manage to post a screenshot of what's written in Odin's log box and post it here...
cm
naufalhadyan said:
If you still can't get to stock it means Odin hasn't even downloaded the firmware into the device. Could be hardware problem (check your USB cable) driver installation (make sure you installed the drivers correctly) or you simply didn't follow the correct procedure.
http://forum.xda-developers.com/showthread.php?t=2616816
Btw, it helps if you manage to post a screenshot of what's written in Odin's log box and post it here...
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11
nandaleo72 said:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11
Click to expand...
Click to collapse
Now that is really weird... :/ I don't know how to solve it, sorry. Looking at Odin's logs, it's supposed to flash correctly. Maybe someone more knowledgable than me can help?
cm
naufalhadyan said:
Now that is really weird... :/ I don't know how to solve it, sorry. Looking at Odin's logs, it's supposed to flash correctly. Maybe someone more knowledgable than me can help?
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
can u tell me how can i post the same to pawitp
I can suggest one thing only
Format /system and /data first from Philz and then try flashing it
Sent from my GT-I9082 using Tapatalk
CM 11
akiratoriyama said:
I can suggest one thing only
Format /system and /data first from Philz and then try flashing it
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------
I have done that also, first format sys/data & cache wipe via philz, and flashed ,same result, the strangest part is its not even accepting zipping of the delta's of CM 11 by pawitp., pls help or else need to go to the service centre samsung 2morrow
nandaleo72 said:
------------------------------------------------------------------------------------------------------------------------------
I have done that also, first format sys/data & cache wipe via philz, and flashed ,same result, the strangest part is its not even accepting zipping of the delta's of CM 11 by pawitp., pls help or else need to go to the service centre samsung 2morrow
Click to expand...
Click to collapse
I have never ever seen such strange problem in the 1.5 yrs of my XDA years
Something is telling me that the system partition is not writable (hence not accepting delta file?)
Can you try to copy a file to /system partition ?
I think you may need to flash a .PIT file
@k2wl @iceyhotguy kindly provide your suggestions
Sent from my GT-I9082 using Tapatalk
I am finding one prob while doing factory reset, it says E : unknown volume for path [ sd-ext], what does this suggest ?
nandaleo72 said:
I own a Samsung Galaxy Grand duos GT - I9082, running on CM 11, PHILZ 6.0.4.5 Recovery, I used Solo launcher as default, now its not getting out of it,My concern is now I am not able to go to stock, I have tried flashing JB 4.1.2 tar.md5 file thru odin 3.07, One thing I am noticing while flashing in odin is it says not responding until the file appears in the pda box, after that every thing works fine, pass msg comes on the screen, but after that it re-boots to the same CM 11, I have also tried doing factory reset, cache & dalvik cache wipe after the flashing, but it never comes back to stock. I am even trying to flash the selinux support recovery, but the same thing happens, after odin pass msg, if i check the recovery its the same PHILZ 6.0.4.5 Recovery. I am really worried that has my phone been bricked.
I have even tried doing format/system, factory reset, cache & Dalvik wipe. usb debugging is selected in the developer section. Can i get the original stock flashed from the samsung ? pls help asap, thank you.
Click to expand...
Click to collapse
nandaleo72 said:
I am finding one prob while doing factory reset, it says E : unknown volume for path [ sd-ext], what does this suggest ?
Click to expand...
Click to collapse
The delay in Odin, or the stopped responding moment, like you mentioned is from the md5 check Odin performs to make sure the firmware is valid. And the sd-ext partition is something that isn't used anymore since JB, nothing to worry about we all get that warning when we wipe in recovery.
Sadly, it's hard to tell what could be wrong, or what you could be doing wrong, just from the problem. But the main thing is, phone is always recoverable, just make sure your data is safely backed up on your computer.
If you haven't already taken your phone into the service center, can you list each and every step you are taking to revert to stock? And I do mean, each step, even boot into recovery, boot into download mode, flashed this recovery/firmware etc, more the details, the better. This way me or other members can analyze more accurately what could be the possible problem.
where can i find this .pit file it's of cm 11 or.........?
It's always better practice to have a recovery before trying things that may ruin your precious time.......
Look for stock files for your smartphone galaxy grand ..... Put files sometimes comes within that file or you have to find it manually by googling...... ?????
Sent from my Nexus 7 using XDA Premium HD app
CM 11
can u suggest any of the knowledgable senior member to solve this problem, bcoz I luv my SGG.
Thank u so much for the concern shown. I have regularly been switching b/w roms [ stock & custom ], my favorites are cm & carbon, i have used recoveries of chotu CWM-TOUCH & Philz touch both ver. 5.15 & cwm - selinux support, now i am on 6.0.4.5. I am running CM 11 now. launcher is solo kikat. I have done nandroid backup of all Roms, I have tried the restore option from clockwokmod / backups, not working out. I am using the following procedure to revert to stock :
1. check debug mode in developer mode
2. to the download mode by pressing volume key downwards & power key & home button at same time wait for the logo to appear, Followed by ODIN Mode, & then press the vol button upwards.
3. open odin, i have a version of 3.07, check only Auto Reboot & F. Reset Time, nothing else, clicking on the PDA, selecting the 4.1.2 I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 file, and pressing start.
4. normally doing a factory reset & cache wipe & re-boot.
hope, i am following the procedure properly, not yet given the handset to samsung service, pls help me out, thnk u once again, pls reply asap.
CM 11
iceyhotguy said:
The delay in Odin, or the stopped responding moment, like you mentioned is from the md5 check Odin performs to make sure the firmware is valid. And the sd-ext partition is something that isn't used anymore since JB, nothing to worry about we all get that warning when we wipe in recovery.
Sadly, it's hard to tell what could be wrong, or what you could be doing wrong, just from the problem. But the main thing is, phone is always recoverable, just make sure your data is safely backed up on your computer.
If you haven't already taken your phone into the service center, can you list each and every step you are taking to revert to stock? And I do mean, each step, even boot into recovery, boot into download mode, flashed this recovery/firmware etc, more the details, the better. This way me or other members can analyze more accurately what could be the possible problem.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thank u so much for the concern shown. I have regularly been switching b/w roms [ stock & custom ], my favorites are cm & carbon, i have used recoveries of chotu CWM-TOUCH & Philz touch both ver. 5.15 & cwm - selinux support, now i am on 6.0.4.5. I am running CM 11 now. launcher is solo kikat. I have done nandroid backup of all Roms, I have tried the restore option from clockwokmod / backups, not working out. I am using the following procedure to revert to stock :
1. check debug mode in developer mode
2. to the download mode by pressing volume key downwards & power key & home button at same time wait for the logo to appear, Followed by ODIN Mode, & then press the vol button upwards.
3. open odin, i have a version of 3.07, check only Auto Reboot & F. Reset Time, nothing else, clicking on the PDA, selecting the 4.1.2 I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 file, and pressing start.
4. normally doing a factory reset & cache wipe & re-boot.
I am also finding that when I try to install any zip from sdcard1 thats my expandable memory slot in philz touch 6.0.4.5 it says E: can't open/storage/sdcard1/cm-10.1-20130412-unofficial-i9082.zip (bad) installation aborted any reasons & also png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11
hope, i am following the procedure properly, not yet given the handset to samsung service, pls help me out, thnk u once again, pls reply asap.
I have made a thread on how to unroot and revert to stock. You can find it here: http://forum.xda-developers.com/showthread.php?t=2639894 . hope this piece of information helps you...
nandaleo72 said:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thank u so much for the concern shown. I have regularly been switching b/w roms [ stock & custom ], my favorites are cm & carbon, i have used recoveries of chotu CWM-TOUCH & Philz touch both ver. 5.15 & cwm - selinux support, now i am on 6.0.4.5. I am running CM 11 now. launcher is solo kikat. I have done nandroid backup of all Roms, I have tried the restore option from clockwokmod / backups, not working out. I am using the following procedure to revert to stock :
1. check debug mode in developer mode
2. to the download mode by pressing volume key downwards & power key & home button at same time wait for the logo to appear, Followed by ODIN Mode, & then press the vol button upwards.
3. open odin, i have a version of 3.07, check only Auto Reboot & F. Reset Time, nothing else, clicking on the PDA, selecting the 4.1.2 I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 file, and pressing start.
4. normally doing a factory reset & cache wipe & re-boot.
I am also finding that when I try to install any zip from sdcard1 thats my expandable memory slot in philz touch 6.0.4.5 it says E: can't open/storage/sdcard1/cm-10.1-20130412-unofficial-i9082.zip (bad) installation aborted any reasons & also png attached, I also wld like to add that in my download mode, it says current bin as custom & system status as official, whereas I am on CM 11
hope, i am following the procedure properly, not yet given the handset to samsung service, pls help me out, thnk u once again, pls reply asap.
Click to expand...
Click to collapse
I was curious if this problem wasn't with what you were doing but with kitkat ROMs, so I looked through XDA and found people having similar issues. Apparently downgrading to JB from KitKat CM is an issue for a lot of users with Samsung phones.
Try this,
1.Go to your recovery, Wipe data/cache and dalvik cache. Format /system under Mounts and Storage.
2. Download and flash a 4.2.2 based stock based ROM (like GENNXT or any you want), this would bring you back on 4.2.2 kernel and stuff, so let it boot up completely.
3. Just to be sure, flash 4.2.2 based recovery with Odin from here - http://forum.xda-developers.com/showthread.php?t=2315529
I honestly don't think recovery should make any difference, but I noticed a thread where the user said it was so just be sure. Then reboot back into recovery, and wipe data/cache and dalvik.
4. Go to download mode, use Odin to flash your 4.1.2 firmware, after it passes, boot into recovery (it should be stock recovery now), clear data and cache and reboot.
I think the problem is arising from all the new SE Linux support in KitKat, so a gradual downgrade should work. You can add a step of flashing 4.2.2 firmware after booting up stock based ROM but shouldn't be needed.
Let me know how it goes.
not working out ?
Hello friend please help me i am in big trouble.
I have Samsung Galaxy Note2 N7100. And first time i have rooted my device viewing youtube tutorial and all are fine, going perfect, and got root on my device. After then second time i am goint to install custome ROM Dr.Ketan and i have downlod it form this froum "N7100_ND3_DrKetan_Custom_ROM_V8" 1.53GB zip file and copyed it on my device external card. And also in the tutorial of "how to install Dr.Ketan vedio" says first of all install philz_touch so i have download "philz_touch_6.02.1-n7100.tar.md5 7.65MB file and going to install it on my device but in this time Odin3 v3.09 doesen't detect my device first time was fine and success to root my device but this time doesn't show up so i have leve it. And go to directly install Dr.Ketan without installing philz_touch. So i am going go to directly on recovery mode by pressing simulteneously power+home+volume up button. And it start on CWM-based recovery V6.0.1.4 mode. First of all i hve back up my phone on external SD card and then go to proceed. First step i have do wipe data/factory reset then second step wipe cache partition and third step i have go to advanced and wipe dalvik cache and finally i have go install Dr.Ketan from install zip from sdcard and then choose Dr.Ketan and it start i have choose all the option and install it fine. Then go to reboot my systm and it reboot first of all show up Samsung GALAXY Note II GT-N7100 and then secod time show SAMSUNG in the middle of screen and also sencor blue light up and i have keep it much then half and our but my phone is not open. So friend it my problems.
After then finally againg go to same procedure but this time i have choose back up and restore and restore it form my agenest back up to SD card all are fine and says restore complete now again i have go to reboot my system this time doesen't reboot automatically i have choose reboot after then same problems.............. dosen't start.
Finally what is wrong with me please help me friend.
Ravanraj said:
Hello friend please help me i am in big trouble.
I have Samsung Galaxy Note2 N7100. And first time i have rooted my device viewing youtube tutorial and all are fine, going perfect, and got root on my device. After then second time i am goint to install custome ROM Dr.Ketan and i have downlod it form this froum "N7100_ND3_DrKetan_Custom_ROM_V8" 1.53GB zip file and copyed it on my device external card. And also in the tutorial of "how to install Dr.Ketan vedio" says first of all install philz_touch so i have download "philz_touch_6.02.1-n7100.tar.md5 7.65MB file and going to install it on my device but in this time Odin3 v3.09 doesen't detect my device first time was fine and success to root my device but this time doesn't show up so i have leve it. And go to directly install Dr.Ketan without installing philz_touch. So i am going go to directly on recovery mode by pressing simulteneously power+home+volume up button. And it start on CWM-based recovery V6.0.1.4 mode. First of all i hve back up my phone on external SD card and then go to proceed. First step i have do wipe data/factory reset then second step wipe cache partition and third step i have go to advanced and wipe dalvik cache and finally i have go install Dr.Ketan from install zip from sdcard and then choose Dr.Ketan and it start i have choose all the option and install it fine. Then go to reboot my systm and it reboot first of all show up Samsung GALAXY Note II GT-N7100 and then secod time show SAMSUNG in the middle of screen and also sencor blue light up and i have keep it much then half and our but my phone is not open. So friend it my problems.
After then finally againg go to same procedure but this time i have choose back up and restore and restore it form my agenest back up to SD card all are fine and says restore complete now again i have go to reboot my system this time doesen't reboot automatically i have choose reboot after then same problems.............. dosen't start.
Finally what is wrong with me please help me friend.
Click to expand...
Click to collapse
Problem is the right recovery,it seems you have the default recovery CWM.You need to flash philz touch via odin for the first time to get a custom recovery on your device ,later you can switch between philz recovery and twrp recovery by flashing their respective zip files from either of the recoveries.So first get your phone to be detected by odin and download the latest philz tar.md5 file from http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.41.6-n7100.tar.md5 uncheck auto reboot in odin and then hit start let it finish flashing once it says pass on odin unplug the usb cable from the laptop.pull your phone's battery out.put it back in after sometime then go into recovery manually you'll see your newly flashed philz recovery.Then do the correct wipes such as wipe cache and dalvik and clean to install a new rom which will factory reset your phone.Then proceed to flash dr ketan's ROM from external sd card.
Thank you sir
Ok sir thank you very much i have done. and another my question is what is the different between N7100_ND3_DrKetan_Custom_ROM_V8 and omni-4.4.4-20140621-n7100-NIGHTLY.
Dr. ketan is a part of omni? am i right sir? And also my question is i can install Dr.ketan and omni in same time in a same device??????
Ravanraj said:
Ok sir thank you very much i have done. and another my question is what is the different between N7100_ND3_DrKetan_Custom_ROM_V8 and omni-4.4.4-20140621-n7100-NIGHTLY.
Dr. ketan is a part of omni? am i right sir? And also my question is i can install Dr.ketan and omni in same time in a same device??????
Click to expand...
Click to collapse
No both are different ROM.Dr ketan's ROM is based on Touchwiz samsung based while OMNI rom are based on AOSP which are like the ROM run on Nexus devices.Well if you flash 4.3 ROM there's devil kernel which allows dual booting that means one can have Two separate ROMs on their device,4.4.2 Kernels don't support it yet.
Edit: Don't call me "sir",call me Pratik.
Thanks
Ok Pratik
And another question is which ROM is the best for my Note 2 N7100.
Ravanraj said:
Ok Pratik
And another question is which ROM is the best for my Note 2 N7100.
Click to expand...
Click to collapse
All ROMS are best ROM for N7100 ,no one will answer you which is the best ROM cause everyone uses their phone differently so what i may like doesn't mean you'd like it too.So try few custom roms for few days each and then stick to the one that suits you best.Also while responding to me click on "quote message in reply?" so i get notified that you have replied to me cause i might not check this thread often to see if you need any further help if you don't quote my post.Good luck