[Q] goldcard error, - Desire HD Q&A, Help & Troubleshooting

hi there i have desire hd (actually in about phone section it shows inspire 4g) but when i chek its imei detail on website there shows desire hd
using goldcard there is an error incorrect modelid i foun this
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.85.0019
INFOversion-baseband: 26.06.04.06_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: d
INFOserialno: ,0ìs
INFOimei: 354455045230107
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: 4*x
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3886mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-9854d819
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
I WANT TO INSTALL CM
ALSO ADB NOT DETECTING MY DEVICE
PLEASE HELP

why do you need a goldcard...what you made for...you wanna flashing a stock RUU..?, but you said you wanna installing CM...so you don't needed to return your phone to the stock state...and as your phone is already had S-OFF (Security OFF) flag of bootloader..you just need replaced or updating your bootloader with the latest once..
if you wanna tried it...because your bootloader is already had s-off..so you can tried flashing this stock RUU that are already rooted and modified by phiber2000 and already had a latest eng s-off hboot version..and after that..if your phone don't have custom recovery yet..you can continued installing a custom recovery (like 4ext, twrp or cwm)..then after that you can installing custom rom that you want..
to flashing that rooted RUU...after you download it..just extracted that zip file...then copied the PD98IMG.zip file to the root of your sdcard (root sdcard is mean don't placed it in any folder on your sdcard..just outside them), then booting your dhd to bootloader..then let bootloader check and confirm you to updating it...just confirm yes with vol up..then wait until done..ask you to reboot your phone..
hope this help..and good luck..

dark_arsh said:
hi there i have desire hd (actually in about phone section it shows inspire 4g) but when i chek its imei detail on website there shows desire hd
using goldcard there is an error incorrect modelid i foun this
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.85.0019
INFOversion-baseband: 26.06.04.06_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: d
INFOserialno: ,0ìs
INFOimei: XXXXXXXXXX
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: 4*x
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3886mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-9854d819
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
I WANT TO INSTALL CM
ALSO ADB NOT DETECTING MY DEVICE
PLEASE HELP
Click to expand...
Click to collapse
You are S-OFF you should be able to flash anything you like. Do not paste your IMEI in here...not necessary and dangerous. Just flash a custom recovery and then CM you are done.

what about bootloader?
glevitan said:
You are S-OFF you should be able to flash anything you like. Do not paste your IMEI in here...not necessary and dangerous. Just flash a custom recovery and then CM you are done.
Click to expand...
Click to collapse
thank a ton for reply.
can cwm flashed without unlocking bootloader?
if yes how?

adb not connects
JJeamy said:
why do you need a goldcard...what you made for...you wanna flashing a stock RUU..?, but you said you wanna installing CM...so you don't needed to return your phone to the stock state...and as your phone is already had S-OFF (Security OFF) flag of bootloader..you just need replaced or updating your bootloader with the latest once..
if you wanna tried it...because your bootloader is already had s-off..so you can tried flashing this stock RUU that are already rooted and modified by phiber2000 and already had a latest eng s-off hboot version..and after that..if your phone don't have custom recovery yet..you can continued installing a custom recovery (like 4ext, twrp or cwm)..then after that you can installing custom rom that you want..
to flashing that rooted RUU...after you download it..just extracted that zip file...then copied the PD98IMG.zip file to the root of your sdcard (root sdcard is mean don't placed it in any folder on your sdcard..just outside them), then booting your dhd to bootloader..then let bootloader check and confirm you to updating it...just confirm yes with vol up..then wait until done..ask you to reboot your phone..
hope this help..and good luck..
Click to expand...
Click to collapse
thanks for reply
i have tried but adb not connects so alway get connection error

dark_arsh said:
thanks for reply
i have tried but adb not connects so alway get connection error
Click to expand...
Click to collapse
can you more cleared explained... what do you want to do exactly with your phone and what do you want to do with adb...?,
if you wanna installing custom recovery and installing custom rom..you don't need adb..
you just need fastboot for doing all of that..
did you already tried what i've told you above to upgrade your firmware..?
you just need upgrade your firmware that like what i've told you before...then after that you can continued installing custom recovery (recovery.img from flastboot), then after that you can installing custom rom that you want from custom recovery that you already installed...

fastboot flash recovery recovery-clockwork-touch-5.8.0.0-ace.img failed
JJeamy said:
can you more cleared explained... what do you want to do exactly with your phone and what do you want to do with adb...?,
if you wanna installing custom recovery and installing custom rom..you don't need adb..
you just need fastboot for doing all of that..
did you already tried what i've told you above to upgrade your firmware..?
you just need upgrade your firmware that like what i've told you before...then after that you can continued installing custom recovery (recovery.img from flastboot), then after that you can installing custom rom that you want from custom recovery that you already installed...
Click to expand...
Click to collapse
fastboot flash recovery says
sending 'recovery' (3554 KB)... OKAY [ 0.597s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.599s

dark_arsh said:
fastboot flash recovery says
sending 'recovery' (3554 KB)... OKAY [ 0.597s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.599s
Click to expand...
Click to collapse
what OS you're using..?, windows 7..?
did you already tried installing it that PD98IMG.zip stock RUU that are already rooted by phiber2000 that i give the link to you above..?
if you're using windows 8.1, just tried with other computer that just have windows 7..because fastboot driver is still problem with windows 8.1

tried on both w7 and w8
JJeamy said:
what OS you're using..?, windows 7..?
did you already tried installing it that PD98IMG.zip stock RUU that are already rooted by phiber2000 that i give the link to you above..?
if you're using windows 8.1, just tried with other computer that just have windows 7..because fastboot driver is still problem with windows 8.1
Click to expand...
Click to collapse
tried both w7 and w8

Flashing PD98IMG.zip..????
Sent from my HTCSensation using Tapatalk

PD98IMG.zip says invalid modelid
JJeamy said:
Flashing PD98IMG.zip..????
Sent from my HTCSensation using Tapatalk
Click to expand...
Click to collapse
PD98IMG.zip says invalid modelid

dark_arsh said:
PD98IMG.zip says invalid modelid
Click to expand...
Click to collapse
try this RUU.., just rename it to PD98IMG.zip and flashing it through bootloader..

i want to debrand it
JJeamy said:
try this RUU.., just rename it to PD98IMG.zip and flashing it through bootloader..
Click to expand...
Click to collapse
bro i want to debrand it
i want to get ride of att

dark_arsh said:
bro i want to debrand it
i want to get ride of att
Click to expand...
Click to collapse
to debrand it your phone..you can using AAHK2 script from here.. (don't know this support for 4g or not...for further information, just asking it in there thread)
but what i know because your phone is already s-off..but still can't installing custom recovery (weird)...then to using AAHK2 script you must return your phone to the stock first..
not sure about this..but maybe you can try it to writing your mid and cid first..
"fastboot oem writemid PD9810000" after that reboot to bootloader again and..
and write with super cid.. "fastboot oem writecid 11111111"
after that if success..you can continued flashing PD98IMG.zip from stock rom that are already rooted by phiber2000 that i give it to you before..

how to unlock bootloader
glevitan said:
You are S-OFF you should be able to flash anything you like. Do not paste your IMEI in here...not necessary and dangerous. Just flash a custom recovery and then CM you are done.
Click to expand...
Click to collapse
how to unlock bootloader
or how to flash cwm

command error
JJeamy said:
to debrand it your phone..you can using AAHK2 script from here.. (don't know this support for 4g or not...for further information, just asking it in there thread)
but what i know because your phone is already s-off..but still can't installing custom recovery (weird)...then to using AAHK2 script you must return your phone to the stock first..
not sure about this..but maybe you can try it to writing your mid and cid first..
"fastboot oem writemid PD9810000" after that reboot to bootloader again and..
and write with super cid.. "fastboot oem writecid 11111111"
after that if success..you can continued flashing PD98IMG.zip from stock rom that are already rooted by phiber2000 that i give it to you before..
Click to expand...
Click to collapse
fastboot oem writemid PD9810000 says
(bootloader) [ERR] Command error !!!
OKAY [ 0.008s]
finished. total time: 0.009s

dark_arsh said:
fastboot oem writemid PD9810000 says
(bootloader) [ERR] Command error !!!
OKAY [ 0.008s]
finished. total time: 0.009s
Click to expand...
Click to collapse
you're already s-off so no problem with unlocked or locked state again..
so i think the only way to fix that is just flashing your stock RUU..from the link that i give in #12

dark_arsh said:
how to unlock bootloader
or how to flash cwm
Click to expand...
Click to collapse
There is no need to unlock the bootloader. Use the guide in my signature on how to flash CWM without and unlocked bootloader.

not worked
JJeamy said:
you're already s-off so no problem with unlocked or locked state again..
so i think the only way to fix that is just flashing your stock RUU..from the link that i give in #12
Click to expand...
Click to collapse
during stock ruu flashing when it reboot to fastboot it says update version d to 3,xxx
my main version is d is it possible? as i think it should be some number
i think the error is due to main version d as i posted first..

link
glevitan said:
There is no need to unlock the bootloader. Use the guide in my signature on how to flash CWM without and unlocked bootloader.
Click to expand...
Click to collapse
give me the link of ur signature

Related

Help HTC Desire HD Vodafone (stuck): flashing custom rom after unlocking bootloader

Hi,
I need your kind advice in fixing my issue. I have DHD Vodafone 3.13.161.3 GB 2.3.5.
I unlocked the phone using HTC official method, phone got restored to factory default and I tried to flash a custom rom without knowing that I need to change the CID.
The phone starts but get stuck on HTC logo, I have EXT4 recovery installed already.
Tried wiping and factory reset but it seems that its of no use. I can boot to hboot, it says unlocked (highlighted) and s-on.
I did try to make a goldcard, put the sdcard in another phone and used the goldcard helper app then went to the site and submitted the CID and downloaded the image and followed the steps.
(got mmc0 and mmc1, I took mmc1 by manually writting it)
I copied another official rom PD98IMG.ZIP downloaded from the net for WWE and ARA versions copied them to SDcard and got into hboot but after loading it says wrong image and goes back to hboot.
I deseparate to get it fixed, would you plz provide some guidance on how to fix it since I was not able to get Vodafone RUU or any other mechanism to fix!
Appreciate your assistance and efforts..
*** Unlocked **
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_oot
eMMC-
If you unlocked from HTCdev you have to flash kernel in fast boot rename boot.IMG to pd98img.zip and accept update. Then remove or rename to pd98img.zip.bak so it doesn't keep updating. It's because of s-on you should be able to downgrade hboot and s-off.
Sent from my Inspire 4G using XDA
sammael1069 said:
If you unlocked from HTCdev you have to flash kernel in fast boot rename boot.IMG to pd98img.zip and accept update. Then remove or rename to pd98img.zip.bak so it doesn't keep updating. It's because of s-on you should be able to downgrade hboot and s-off.
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Thanks for your response Sammael,
Just some background info about my case:
I have DHD from Vodafone UK which was on the latest rom from Vodafone 2.3.5, I did bootloader unlock using HTCDev then flashed Ext4 recovery.
I tried flashing a custom rooted rom based on WWE version using the recovery mode (install zip from sdcard) after which I got the phone stuck on HTC logo screen everytime I try to power it on.
I tried using WWE RUUs with fastboot usb but got err155, I downloaded Vodafone PD98IMG.zip from that was uploaded by a guy in another forum but copying it to the sdcard and loading it using hboot gave me wrong image/rom message. I tried running WWE RUU then copying the PD98IMG.zip to the temp folder and renaming it to rom.zip after deleting the original rom.zip but again I got err155.
I need at least to get back on Vodafone stock rom and fix the problem, I am not sure if I need to relock the bootloader and if I must flash back the stock recovery.
Can anyone help with this as I have been trying different options for the last 4 days and all the tools that were mentioned need to have a functional phone to do usb debugging and charge only mode!
*** Unlocked***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011,14:28:19
First will cover the obvious you should have unlocked via HTC dev. The hack kit is the way to go about things
Now for the fix.
Download a custom rom on PC, have androidsdk setup
Boot into recovery and reinstall your custom from.(remember to full wipe).
Once complete plug phone into PC and run adb reboot bootloader.
Once in boot loader select fast boot if its not already selected.(should read fast boot USB)
Now in the custom rom you download open it and take out the boot.img and put it wherever you have adb/fast boot folders
Then type the command
Fastboot flash boot boot.img
Fastboot reboot
You will have to do this every time you flash a new rom, since you HTC dev unlocked. I would search into relocking boot loader and using the hack kit
Sent from my Desire HD using XDA
marsdta said:
First will cover the obvious you should have unlocked via HTC dev. The hack kit is the way to go about things
Now for the fix.
Download a custom rom on PC, have androidsdk setup
Boot into recovery and reinstall your custom from.(remember to full wipe).
Once complete plug phone into PC and run adb reboot bootloader.
Once in boot loader select fast boot if its not already selected.(should read fast boot USB)
Now in the custom rom you download open it and take out the boot.img and put it wherever you have adb/fast boot folders
Then type the command
Fastboot flash boot boot.img
Fastboot reboot
You will have to do this every time you flash a new rom, since you HTC dev unlocked. I would search into relocking boot loader and using the hack kit
Sent from my Desire HD using XDA
Click to expand...
Click to collapse
Hi marsdta,
I sort of worried about doing what you suggested as my device still show the CID as VODAP001. Its on Ship S-On and the problem I got into was by flashing a custom rom through CWM.
Just to provide more info, I got the below details by running fastboot command getvar all. I also tried to run a WWE RUU with the goldcard plugged into my DHD but got this error message version-main failed status malformed 1 bytes!!
C:\windows\system32>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: HT0C9RX00000
INFOimei: XXXXXXXXXX
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 4174mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.008s
I had some progress, relocked the bootloader and copied the PD98IMG.ZIP to sdcard. The phone starts loading the PD98IMG and then running the check, it fails on some point which I think might be the PD98IMG I got is older than the software raido/hboot installed on my phone. Below are the details.
Checking PD98IMG.zip
Main version older!
update failed
Press <Power> to reboot
The PD98IMG.zip has an android-info.txt that contains the following:
*********
modelid: PD9810000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAP304
cidnum: VODAPE17
mainver: 2.50.161.3
hbootpreupdate:12
*********
When powering the phone with vol-down I see the following info
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011,14:28:19
I think I may need the latest PD98IMG.zip to reflash the phone back to Vodafone stock software, plz correct me if I am wrong?
The PD98IMG.zip which was provided a vodafone uk phone owner seems to check the version of my phone's current state hboot/radio.
Is there any place where I can get the latest PD98IMG.zip even if I have to pay for it?
yabdali said:
I had some progress, relocked the bootloader and copied the PD98IMG.ZIP to sdcard. The phone starts loading the PD98IMG and then running the check, it fails on some point which I think might be the PD98IMG I got is older than the software raido/hboot installed on my phone. Below are the det
I think I may need the latest PD98IMG.zip to reflash the phone back to Vodafone stock software, plz correct me if I am wrong?
The PD98IMG.zip which was provided a vodafone uk phone owner seems to check the version of my phone's current state hboot/radio.
Is there any place where I can get the latest PD98IMG.zip even if I have to pay for it?
Click to expand...
Click to collapse
I haven't been able to find the newest ruu for your branded device. Best I can say is keep looking. But if you can't find it your going to have to flash a from how I suggested to get a working phone.
Or maybe wait and see if anyone has other ideas to try
Sent from my Inspire 4G using XDA
marsdta said:
I haven't been able to find the newest ruu for your branded device. Best I can say is keep looking. But if you can't find it your going to have to flash a from how I suggested to get a working phone.
Or maybe wait and see if anyone has other ideas to try
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Hi marsdta,
Thanks for your contribution..
I have relocked my bootloader, tried flashing the PD98IMG.zip but I got main version is older message.
I unzipped the PD98IMG.zip and tried flashing the radio and the boot in fastboot USB mode but signature failed!
Do you have any suggestion or insights about what else I should do?
D:\htctest\files>Fastboot flash radio radio.img
sending 'radio' (24960 KB)... OKAY [ 4.556s]
writing 'radio'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 7.792s
D:\htctest\files>Fastboot flash boot boot.img
sending 'boot' (2764 KB)... OKAY [ 0.502s]
writing 'boot'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.864s
Did you try getting S-OFF via the Advanced Ace Hack Kit? I got a Vodafone DHD on release in Aus and was prompted to make a gold card, eventually managed S-OFF without one.
You get the main version older because your son. And you get the failed remote because your relocked the bootloader. Personally at this point I would unlock the boat loader again, flash cwr then a from and then its boot.img to get a working phone. Then if the pd98img/ruu that you need comes available go back and root properly. But for now I would say to at least get it in a useable state
Sent from my Inspire 4G using XDA
marsdta said:
You get the main version older because your son. And you get the failed remote because your relocked the bootloader. Personally at this point I would unlock the boat loader again, flash cwr then a from and then its boot.img to get a working phone. Then if the pd98img/ruu that you need comes available go back and root properly. But for now I would say to at least get it in a useable state
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Hi marsdta,
Thanks again. Just a quick clarification, which boot.img do you suggest I should flash after unlocking the bootloader and flashing cwm?
yabdali said:
Hi marsdta,
Thanks again. Just a quick clarification, which boot.img do you suggest I should flash after unlocking the bootloader and flashing cwm?
Click to expand...
Click to collapse
Depends on what rom you want to install.
So let's say you want to flash cm. Download the rom on your pc. Place a copy of it on your SD card as well. Boot into cwr and flash as usual. Once complete boot into the boot loader.(using adb reboot boatlader is convenient, but you could do it manually by pulley battery and powering up with volume down+power button)
Then take out the boot.img of cm zip and flash as you tried earlier(fastboot flash boot boot.img)
Then reboot phone
Sent from my Inspire 4G using XDA
marsdta said:
Depends on what rom you want to install.
So let's say you want to flash cm. Download the rom on your pc. Place a copy of it on your SD card as well. Boot into cwr and flash as usual. Once complete boot into the boot loader.(using adb reboot boatlader is convenient, but you could do it manually by pulley battery and powering up with volume down+power button)
Then take out the boot.img of cm zip and flash as you tried earlier(fastboot flash boot boot.img)
Then reboot phone
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Thankssssssssssssssssssssssssssssssssssssssss
That did the trick, my phone is now up and running smoothly. You are the man, big THANK YOU.
NOPE Help me ! hurry up
MY DEVICES IS TURNED ON.BUT ACCIDENTALLY TURNED OFF.
NOW i can't push recovery.
my recovery (touch clock work mod) can't flash rom and hang on flashing boot.img and give error (status 7).
my device don't accept pd98img.
cant flash boot.img in fastboot : (remote not allowed)
can't write cid 11111111 or HTC__001
dont accept xtc clip.
dont accept goldcard.
dont accept boot.img renamed to pd98img.zip
just can lock and unlock with fastboot.
Note : when i'm going to clock work mod say E:Can't open /cache/recovery/log
E:can't open /cache/recovery/lat_log
just cry
Plz Help Me
Hi.
I have the same problem as described here. But my desire HD is the spanish vodafone version.
I found the original RUU here: https://docs.google.com/file/d/0B7S5vzd6Qvh9SDR4cmRwTGZWaXc/edit?usp=sharing
- I will start renaming the file to PD98IMG.zip in the SD card
- Start in bootloader mode
- Push vol+ to start the flashing
Humano, did it work?
Sent from my ATRIX HD

[Q] Looking for Endeavour 1.29.206.11 please

I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
seanicca said:
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
Click to expand...
Click to collapse
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Tried flashing 1.26.206.2 through fast boot?
brlauk_HOX said:
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Click to expand...
Click to collapse
Cwm 5.8.4.0 allows sd mounting in recovery, try flashing that
sent from my One X using xda venom premium
xmoo said:
Tried flashing 1.26.206.2 through fast boot?
Click to expand...
Click to collapse
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
brlauk_HOX said:
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
Click to expand...
Click to collapse
Get the rom.zip and
adb reboot oem-78
fastboot flash zip rom.zip
http://forum.xda-developers.com/showthread.php?p=28665193
Sent from my HTC One X
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
blocka said:
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
Click to expand...
Click to collapse
Install directly the RUU 1.26.206.2
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
thank you appreciate the link
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
blocka said:
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
Click to expand...
Click to collapse
Please post the result from command fastboot getvar all and delete IMEI and S/N
Thant said:
Please post the result from command fastboot getvar all and delete IMEI and S/N
Click to expand...
Click to collapse
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
blocka said:
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
Click to expand...
Click to collapse
Ok in this case Download RUU 2.17.206.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.267.206.2 will not work for you.
Click to expand...
Click to collapse
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
blocka said:
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
Click to expand...
Click to collapse
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Thant said:
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Click to expand...
Click to collapse
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
blocka said:
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
Click to expand...
Click to collapse
NO You can't receive the OTA via custom recovery you need ctock recovery and stock rom unrooted
1) Lock your bootloader
2) Run the RUU
3) Apllay all update to 4.x.206.x 4.2.2 JB
4) Unlock your Bootloader
5) Install Philz custom recovery
6) Do a Nandroid Backup on 4.2.2.JB . Save on secure plase it is better to have 2 copies on nandroid on different place
7) If you wont Install custom rom or root the stock it is your decision and don't forget to flash the boot.img if you install custom rom
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Click to expand...
Click to collapse
Hi - was just about to go through the process of reverting to stock when I noticed the RUU and link you suggested
Download RUU 2.17.207.2
Click to expand...
Click to collapse
actually is linked to RUU_ENDEAVOR_U_ICS_40_S_O2_UK_2.17.206.2_Radio_2.1204.135.20_release_275038_signed.exe.
So before I start I need to find out exactly what RUU I need, either 2.17.206.2 or 2.17.207.2.
Thanks for ya help .

[Q] hd stuck on boot screen,rooted but s-on

hi i hope someone can help my htc desire hd is s-on and bootloader locked but cant insall any roms this is the info on my phone its also rooted
c:\james>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH11ARXxxxxx
INFOimei: 352668047339989
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4182mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.010s
i hope some one can tell me the correct ruu from shiped roms i have tried severall also the phone is rooted but cant install custom roms it has clockwork recovery v5.8.1.5 but wont let me install anything that way either
thanks for your help jimmy
You're S-On, bootloader locked, and rooted? Unlock your bootloader and fastboot flash a recovery. Root alone won't let you flash ROMs.
Nlo
bananagranola said:
You're S-On, bootloader locked, and rooted? Unlock your bootloader and fastboot flash a recovery. Root alone won't let you flash ROMs.
Click to expand...
Click to collapse
Thanks bananagranola can u tell me which one pls tried flashing ruu before with bootloaer unlocked
Not a RUU, a recovery.
bananagranola said:
Posting nonsense to get ten posts and posting in a language other than English are both not allowed.
Click to expand...
Click to collapse
Thank u for your warning,i got it.:fingers-crossed:
---------- Post added at 02:29 PM ---------- Previous post was at 02:17 PM ----------
bananagranola said:
Posting nonsense to get ten posts and posting in a language other than English are both not allowed.
Click to expand...
Click to collapse
By the way,can i enroll the registeredname is Chinese? I worried about this.:crying:
王强_Sir said:
By the way,can i enroll the registeredname is Chinese? I worried about this.:crying:
Click to expand...
Click to collapse
I believe you can. Just don't post without a translation.
Thread has been cleaned.
Please note all posts must be in English.
Hi can you tell me where to download the recovery tks
jimmymac1 said:
Hi can you tell me where to download the recovery tks
Click to expand...
Click to collapse
Google for clockworkmod. It should be the top result. Find the one for DHD. My finding it for you will take as much effort as your finding it yourself. This is a forum where you are expected to search and read for yourself; no one will hold your hand.
hi bananagranola ive done all that when i install roms it just keeps going back to htc white logo screen i installed this recovery-clockwork-2.5.1.2-ace-modaco-r2.img and then a rom
If you are not S-Off you need to fastboot flash the ROM zip's boot.img.
bananagranola said:
If you are not S-Off you need to fastboot flash the ROM zip's boot.img.
Click to expand...
Click to collapse
thank you mate you are diamond
If it helps boot into hboot then fastboot
Make sure you have the drivers installed
Connect phone and make sure it says fastboot usb
from the directory that contains adb, fastboot etc copy the recovery.img to it and run a cmd prompt
fastboot flash recovery recovery.img.
Reboot phone into recovery and you should have cwm or 4ext whatever recovery.img you used.
If you are s-on and want to use custom roms you'll have to unlock boot with htdev and manually fastboot flash the roms boot.img after installing the rom with the recovery you're using.
Stu

[Q] Goldcard & RUU

Hello XDA,
I have here a HTC Desire HD and it's Vodafone Branded, but that doesn't need to be a problem.
I want to make an Goldcard so I can flash Stock rom, because it's soft-bricked by trying to make a goldcard and trying tools that doesn't work.
I know the tools from: http://forum.xda-developers.com/showthread.php?t=2169515 but they are forwarding me to http://psas.revskills.de/?q=goldcard to request an goldcard image file, but that site is down.
I got the tool from Revskills but I don't understand it to make an goldcard.
I have also done this earlier by an other Desire HD and that one runs custom rom now and works well and I want to do this also to my current HTC Desire HD.
Now the only problem is, the HTC Desire HD is not booting to OS, it restarts over and over and I can only enter Recovery and Fastboot(also bootloader ofc.)
How can I get this done ?
Turkdale said:
Hello XDA,
I have here a HTC Desire HD and it's Vodafone Branded, but that doesn't need to be a problem.
I want to make an Goldcard so I can flash Stock rom, because it's soft-bricked by trying to make a goldcard and trying tools that doesn't work.
I know the tools from: http://forum.xda-developers.com/showthread.php?t=2169515 but they are forwarding me to http://psas.revskills.de/?q=goldcard to request an goldcard image file, but that site is down.
I got the tool from Revskills but I don't understand it to make an goldcard.
I have also done this earlier by an other Desire HD and that one runs custom rom now and works well and I want to do this also to my current HTC Desire HD.
Now the only problem is, the HTC Desire HD is not booting to OS, it restarts over and over and I can only enter Recovery and Fastboot(also bootloader ofc.)
How can I get this done ?
Click to expand...
Click to collapse
You phone can not be stuck in a bootloop for trying to create a goldcard, which is done in in the sdcard and not in the device itself. Besides, the tools provides you another tool to create a goldcard, quoting:
...IF YOUR BUILD VERSION IS NOT SUPPORTED TO UPDATE THEN:
Create a goldcard using this tool: http://d-h.st/VMw, once you have the .img file patch it using the SimpleGoldCard Tool included in the tools folder. (you need a working phone for this)
Find a RUU which main version is supported and higher than yours and flash it in the PD98IMG.zip way, that is what is the goldcard for. If you have a .exe RUU, then extract the rom.zip file using this method: http://www.xda-developers.com/xda-tv...-an-ruu-xdatv/
Re run the tool and you will be able to update the hboot and unlock it...
Click to expand...
Click to collapse
What did you flash to get your device in that state? To create a goldcard you will need a working phone, so you can use the other DHD to do it.
glevitan said:
You phone can not be stuck in a bootloop for trying to create a goldcard, which is done in in the sdcard and not in the device itself. Besides, the tools provides you another tool to create a goldcard, quoting:
What did you flash to get your device in that state? To create a goldcard you will need a working phone, so you can use the other DHD to do it.
Click to expand...
Click to collapse
I tried to use AAHK for HTC Desire HD, but the website of the developer of it, is offline.
Now the phone starts, after HTC splashscreen, I see Vodafone Splash Screen and after that It keeps rebooting from HTC splashscreen.
How can I solve this ? Factory reset and format data/factory reset @ recovery doesn't solve the issue.
Turkdale said:
I tried to use AAHK for HTC Desire HD, but the website of the developer of it, is offline.
Now the phone starts, after HTC splashscreen, I see Vodafone Splash Screen and after that It keeps rebooting from HTC splashscreen.
How can I solve this ? Factory reset and format data/factory reset @ recovery doesn't solve the issue.
Click to expand...
Click to collapse
Of they did not...in fact they made things worse as you deleted the usb debugging drivers from the phone. Hack Kit hasn't been online for about 6 months now and so is support.
Your only way to get out of that is to flash a RUU.
glevitan said:
Of they did not...in fact they made things worse as you deleted the usb debugging drivers from the phone. Hack Kit hasn't been online for about 6 months now and so is support.
Your only way to get out of that is to flash a RUU.
Click to expand...
Click to collapse
Yes I understand that, but the problem is that I can't find a RUU that works for my HBOOT version. I tried 2 RUU's. If you can find a working one, it won't be a problem anymore.
Can you do a printout of your Phone via fastboot mode with
fastboot getvar all
please.
hacktrix2006 said:
Can you do a printout of your Phone via fastboot mode with
fastboot getvar all
please.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.161.5
(bootloader) serialno: HT0BWRX11664
(bootloader) imei: *secret*
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: VODAPE17
(bootloader) battery-status: good
(bootloader) battery-voltage: 3679mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.008s
I would hide the IMEI if i was you.
Use http://forum.xda-developers.com/showthread.php?t=2288012 which is from glevitan to make a goldcard then once you have done that download the right RUU run the .exe and in %temp% look for rom.zip
once you have done this place rom.zip in the same folder as fastboot and adb then open command prompt and cd into the directory that fastboot and adb is in.
Then type the following with the goldcard in the phone.
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (Just to make sure)
fastboot reboot
This should then fix your phone.
Thank you very much for your tip en help. Didn't notice about the IMEI I would try your advice tonight when I'm home and will keep you updated.
Sent from my GT-I9300 using xda premium
hacktrix2006 said:
I would hide the IMEI if i was you.
Use http://forum.xda-developers.com/showthread.php?t=2288012 which is from glevitan to make a goldcard then once you have done that download the right RUU run the .exe and in %temp% look for rom.zip
once you have done this place rom.zip in the same folder as fastboot and adb then open command prompt and cd into the directory that fastboot and adb is in.
Then type the following with the goldcard in the phone.
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (Just to make sure)
fastboot reboot
This should then fix your phone.
Click to expand...
Click to collapse
I am not sure that flashing that way will fix the device as the goldcard is in the sdcard and not the device. To locate the goldcard in the device he would need to have temp root access.
He needs to flash the ruu in the PD98IMG.zip way from the root of the sdcard.
Goldcard works both ways also if he is S-ON which he is he can't use the PD98IMG.zip way on the fastboot oem rebootRUU way to flash
hacktrix2006 said:
I would hide the IMEI if i was you.
Use http://forum.xda-developers.com/showthread.php?t=2288012 which is from glevitan to make a goldcard then once you have done that download the right RUU run the .exe and in %temp% look for rom.zip
once you have done this place rom.zip in the same folder as fastboot and adb then open command prompt and cd into the directory that fastboot and adb is in.
Then type the following with the goldcard in the phone.
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (Just to make sure)
fastboot reboot
This should then fix your phone.
Click to expand...
Click to collapse
I did try this and just getting this:
Code:
sending 'zip' (293949 KB)...
OKAY [ 49.289s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 89.611s
right that means the goldcard was not made successfull
"FAILED (remote: 42 custom id check fail)
the card is not valid or the process is not done correctly"
which means you need to try another sdcard and remake the goldcard.
I take it you have no custom recovery? If you really need help PM with a Teamviewer ID and password. I will then try and help.
hacktrix2006 said:
right that means the goldcard was not made successfull
"FAILED (remote: 42 custom id check fail)
the card is not valid or the process is not done correctly"
which means you need to try another sdcard and remake the goldcard.
I take it you have no custom recovery? If you really need help PM with a Teamviewer ID and password. I will then try and help.
Click to expand...
Click to collapse
I can't make a goldcard because the phone isn't booting, it has a bootloop. Could you please provide me support by Google Talk(Hangout) or something else what would be faster and easier to communicate ?
I won't share your private account details like your username, but It would be easier for me and you to talk to each other.
If you could wait till tomorrow i can get you the HTC Dev bootloader in a oem rebootRUU .zip and give you instructions on how to restore the phone fully with S-Off as well.
I am on GMT timezone and its late. PM me tomorrow and i will give you my google hangout or better still get teamviewer installed so i can remotely do the whole thing for you.
hacktrix2006 said:
If you could wait till tomorrow i can get you the HTC Dev bootloader in a oem rebootRUU .zip and give you instructions on how to restore the phone fully with S-Off as well.
I am on GMT timezone and its late. PM me tomorrow and i will give you my google hangout or better still get teamviewer installed so i can remotely do the whole thing for you.
Click to expand...
Click to collapse
I'm a IT guy and ofcourse I have Teamviewer and I will be glad if you can help me tomorrow... It will be finally again that's someone is connecting to me by Teamviewer hahaha and I'm also on GMT timezone, 1:56 here (Netherlands) I will PM you now for tomorrow, with my Gmail for Hangout
I have added you will not be around till after 11:00am like, best to teamviewer in that way i can just restore your phone to working order and have S-OFF

Stuck on bootloader.

Hi !
I have a problem with my HTC DHD device. I unlocked it and rooted it a long time ago, using goldcard, installed Rom Manager, flashed the recovery, install CM...and all of a sudden, my phone shutted down, and couldn't stop rebooting, got the green HTC logo, and he reboot.
I had this problem a few month ago, i tried several things, that put my phone back in S-ON.
I actually got this :
Code:
c:\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.85.0024
INFOversion-baseband: 26.09.04.11_M2
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 2.50.405.2
INFOserialno: SH12ARX01979
INFOimei: 356299049586678
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP203
INFObattery-status: good
INFObattery-voltage: 3635mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: a3d4fa0f
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.008s
I can't access to recovery, and i can't boot on anything else than the HBOOT or FASTBOOT mode.
I tried to unlock from htc dev, but it says that i need to upgrade my HBOOT before using htcdev tool.
As i was back in S-ON mode, i tried severals RUU Roms.
As the getvar all says i'm actually running 2.50.405.2, so i tried to install a clean RUU using
RUU_Ace_Gingerbread_S_HTC_WWE_2.50.405.2_Radio_12.54.60.25_26.09.04.11_M2_release_199042_signed
( Got a french HTC DESIRE HD )
I'd like to flash a new recovery to make everything ok again. But i'm stuck, there is no ruu working, and i can't unlock bootloader, nor reinstall a recovery
everytime i try to flash something into any directory, i got this signature failed error.
Code:
c:\Fastboot>fastboot flash /sdcard PD98IMG.zip
sending '/sdcard' (261908 KB)... OKAY [ 43.281s]
writing '/sdcard'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 76.264s
Can someone help me ?
I might be wrong but I think you might need another ruu and a new goldcard
Sent from my HTC Desire HD using XDA Premium 4 mobile app
bondocel said:
I might be wrong but I think you might need another ruu and a new goldcard
Sent from my HTC Desire HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried different RUU versions, all above the actual one or at least the same version.
The thing is that i can't actually put it back on its original configuration. CID is normal though, i can't find the original recovery, i'd like to flash it, i think it's the only thing that remains modified on the phone.
I had the exact same problem as you have when i bought the phone. AAHK was working back then and even with aahk the phone could not be fixed and the with the help of the devs on irc chat i managed to fix it
They told me that my phone was previously rooted and s-off but a strange RUU was flashed so they told me to flash cwm through fasboot and flash a custom rom.
Wich i did and it worked.
P.S. you might wanna try another sd card, this one might be fried ( faulty mem blocks)
bondocel said:
I had the exact same problem as you have when i bought the phone. AAHK was working back then and even with aahk the phone could not be fixed and the with the help of the devs on irc chat i managed to fix it
They told me that my phone was previously rooted and s-off but a strange RUU was flashed so they told me to flash cwm through fasboot and flash a custom rom.
Wich i did and it worked.
P.S. you might wanna try another sd card, this one might be fried ( faulty mem blocks)
Click to expand...
Click to collapse
Thanks for your answer, your previous problem exactly matches with mine. I'll try what you've said, the thing is that i'm actually not rooted, and S-ON, i can't use htcdev/unlockbootloader, because de version of my bootloader is too old ( i haven't used the phone for a while ) -
In fact :
- To solve my problem, like u said i have to flash CWM and a custom rom
- To flash a recovery, i need to unlock bootloader
- To unlock bootloader, i need to upgrade my bootloader
- To flash a ruu and upgrade my bootloader i need to have an original recovery
- Got a recovery problem i need another one, so let's flash CWM ( repeat everything )
Bruwno said:
Thanks for your answer, your previous problem exactly matches with mine. I'll try what you've said, the thing is that i'm actually not rooted, and S-ON, i can't use htcdev/unlockbootloader, because de version of my bootloader is too old ( i haven't used the phone for a while ) -
In fact :
- To solve my problem, like u said i have to flash CWM and a custom rom
- To flash a recovery, i need to unlock bootloader
- To unlock bootloader, i need to upgrade my bootloader
- To flash a ruu and upgrade my bootloader i need to have an original recovery
- Got a recovery problem i need another one, so let's flash CWM ( repeat everything )
Click to expand...
Click to collapse
http://shipped-roms.com/index.php?category=android&model=Ace
1) conect phone to pc, run instalation ruu
2) during instalation process find in win/temp folder file named rom.zip
3) copy this file into folder with adb and fastboot files
4) cancel instalation
5) in phone run bootloader than fastboot
6) run command prompt in folder with adb, fastboot and rom files, than type "fastboot oem rebootRUU"
7) wait a few minute until phone goes in ruu install mode
8) than from command prompt type "fastboot flash zip room.zip", if you get error repeat once again without exiting ruu install mode (some times is needed to do it twice)
9) when install finish type "fastboot reboot" and now phone should be repaired
You can do factory reset before and after.

Categories

Resources