Develop Bugs

Cant Flash new ROMs anymore. Please help.

Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.

Copy the ROM to your device (some storage folder)
Boot directly to TWRP
Manually install the ROM and the appropriate GAPPS
(watch the script window and see what it says.. look for errors)
Clear caches and dalvik
reboot

LuckyColdJohnson said:
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Click to expand...
Click to collapse
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.

I think its my recovery Twrp. I changed something.
adam_wingert said:
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
Click to expand...
Click to collapse
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.

LuckyColdJohnson said:
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
Click to expand...
Click to collapse
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium

What have I done ?
Android The Greek said:
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day

LuckyColdJohnson said:
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
Click to expand...
Click to collapse
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website

I figured it out!!!!!!!
Doggydude said:
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
Click to expand...
Click to collapse
It was the settings in TWRP. One of the boxes was checked. Sim actions for theming. I unchecked that and was on my way. Rocking The Collective AoCP now !!!!! Yes.....Thanks to all of you for your input. I'm going back to each and will hit thanks right now! Thanks again XDA members.
Lucky

I'm glad things worked out... isn't it amazing how attached we get to our toys
Sent from my GT-N7105 using Tapatalk 2

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?

nwjimmy said:
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?
Click to expand...
Click to collapse
Are you wiping system and data before flashing? This is most likely your issue.

zelendel said:
Are you wiping system and data before flashing? This is most likely your issue.
Click to expand...
Click to collapse
yes, cache and dalvik, and a factory reset.

nwjimmy said:
yes, cache and dalvik, and a factory reset.
Click to expand...
Click to collapse
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.

zelendel said:
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.
Click to expand...
Click to collapse
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.

nwjimmy said:
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.
Click to expand...
Click to collapse
No wiping the system doesnt format the data partition. Wipe system then format the data and then wipe the caches and then flash the rom.

Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
matt_schieman said:
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Agreed.
Double check your gapps and make sure uts the right version
sent from my 1920 overclocked note 2 running jedi xp12

What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

nwjimmy said:
What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Most rom threads have a download link to the gapps that work with the version of android that specific rom is on. Look in the rom thread for the one you're currently running. There are different gapps for each android version (4, 4.1, 4.2)

I have that same problem too
I was trying to install new roms for my phone i tried liquid smooth and avatar and CM 10. I also tried install a new kernel and also different recoveries but nothing seems to work. I never "dirty" flashed and i use the right gapps. Someone please help me here i hate stock roms!

No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't work.

xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse

fig03 said:
xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse
That's a good point. You should be on TWRP 2.7.0.0 that's the latest version of that recovery.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, but it constantly froze, tried to reset, stuck with the same issue. Never used TWRP, so if someone could actually point me in the right direction, that'd actually be helpful.

xantechie said:
I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, though...it doesn't really look the way I remember it last it worked, but it's had the issue so long, I forget what it actually looked like before.
Click to expand...
Click to collapse
I have no idea how to use TWRP...it only lists a .img file and no instructions on how to use it. zip files can be used from the bootloader or recovery. WTF am I supposed to do with an .img file. And it can't be to use the terminal emulator because to do that I would have to be able to get passed the Setup Wizard...which is the issue.

I finally figured it out with CWM. Thankfully. The phone would've went flying otherwise.
If anyone else stumbles upon this thread (so they can find the answer for CWM also), you have to format the device from the CWM Recovery to get rid of the crap that is blocking it. I did the following:
Once in CWM Recovery, Remove your SD card to avoid formatting it by accident.
Use the Volume Key to scroll to "mounts and storage".
Format all existing options (this is why the SD needed to be removed); this will blank out the phone's system which was causing the Setup issue to begin with.
Put your SD card with the ROM to be installed back into the phone.
Follow the guide as normal after this (install ROM, then reboot, then KK_gapps, then wipe the two caches, then reboot.)

USB Debugging not accessible

Hi
I was flashing back to Stock from task650 to fix my gps. Well something blew up and when the phone reboots the screen goes black but I hear the AT&T start-up tune. Essentially I can't get to enable USB debugging to reflash. I can get to download or recovery, but there are no files to recover<?> and busybox never got installed.
What do I do now?

Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.

CZ Eddie said:
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
Click to expand...
Click to collapse
Yes I have stock recovery. Odin is of no use because it hangs waiting for the USB debug to respond. And i can't turn it on because the screen is black and I can't navigate

Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release

xBeerdroiDx said:
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
Click to expand...
Click to collapse
Thanks. I created an emergency tool kit on an SD, I wiped data, wiped cache and Davlik and formated system. Flashed the stock rom. When I rebooted it now hung at the Samsung Galaxy S III screen.
How do I get out of this mess?

Try wiping data and cache again in recovery

xBeerdroiDx said:
Try wiping data and cache again in recovery
Click to expand...
Click to collapse
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.

BertMor said:
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
Click to expand...
Click to collapse
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.

xBeerdroiDx said:
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
Click to expand...
Click to collapse
When it rains it pours. Now I can't get into recovery. I get the empty battery graphic cycling on and off, and its very warm to the touch. I think the battery is not charging.
I tried using Odin and flashed a stock rom but I kept getting verification errors and status 7 errors. Things just are not taking. I fear I've got a hard brick and I don't know what to do to fix it.
I appreciate your help

aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?

xBeerdroiDx said:
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
Click to expand...
Click to collapse
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery

it might indeed be drained. leave it plugged in for a while and report back.
you were getting the error/status 7 messages after you flashed cwm back on it likely because the cwm wasnt up-to-date.
what was the last thing you tried before it stopped working altogether?

It gets really hot if I leave it plugged in. But it seems like I can get into recovery again. The last thing I flashed was CMW 6.0.3.1. But what is on it now is CMW 5.5.0.4

actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.

BertMor said:
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
Click to expand...
Click to collapse
xBeerdroiDx said:
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
Click to expand...
Click to collapse
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide

BertMor said:
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
Click to expand...
Click to collapse
Well I think I managed it!. First I tried to install an update d/l'ed from Dropbox and that did nothing. Then I flashed an old .tar that was a rooted stock and it rebooted!
I tried editing the updater-script but I couldn't getit to save the changes properly.
Well I will now re flash the RM and CWM and hope for the best
Thanks for all your help, greatly appreciated

An odd situation please help?

Okay so to start off I had RSL14 Hyperdrive installed on the rom, ended up trying a new one and when going to wipe data, cache, dalvik, system as usual i ran into an odd error. I am using TWRP recovery and when going to wipe data, the phone just restarted, so i rebooted into recovery and tried again same thing.....which was odd. So i reinstalled twrp and then tried again same thing. Then I decided to install CWM 6.0.1.2 and it wipes data and everything fine, but when going to wipe cache, dalvik, or data it sometimes states E: unknown volume for path {/sd-ext}. On top of that everyonce in a while it says E: unable to format unsafe partition?
Please help its causing me problems and I am a flashaholic.
Regards,
Sean

sean82007 said:
Okay so to start off I had RSL14 Hyperdrive installed on the rom, ended up trying a new one and when going to wipe data, cache, dalvik, system as usual i ran into an odd error. I am using TWRP recovery and when going to wipe data, the phone just restarted, so i rebooted into recovery and tried again same thing.....which was odd. So i reinstalled twrp and then tried again same thing. Then I decided to install CWM 6.0.1.2 and it wipes data and everything fine, but when going to wipe cache, dalvik, or data it sometimes states E: unknown volume for path {/sd-ext}. On top of that everyonce in a while it says E: unable to format unsafe partition?
Please help its causing me problems and I am a flashaholic.
Regards,
Sean
Click to expand...
Click to collapse
Unsafe partition usually means your internal partitions got corrupted somehow.
I would suggest to flash a stock ROM via ODIN or ADB. You could try MSkips toolbox if your comfortable using it-http://forum.xda-developers.com/showthread.php?t=1703488
message brought to you by my GalaxyS3

So....
joeyhdownsouth said:
Unsafe partition usually means your internal partitions got corrupted somehow.
I would suggest to flash a stock ROM via ODIN or ADB. You could try MSkips toolbox if your comfortable using it-http://forum.xda-developers.com/showthread.php?t=1703488
message brought to you by my GalaxyS3
Click to expand...
Click to collapse
If I flash the stock recovery via odin will this fix the partition? I'd really hate to have to do that but reflashed both recoveries a couple different times and like the rom im currently on but if it must be then I guess I have no choice.

sean82007 said:
If I flash the stock recovery via odin will this fix the partition? I'd really hate to have to do that but reflashed both recoveries a couple different times and like the rom im currently on but if it must be then I guess I have no choice.
Click to expand...
Click to collapse
I think you need to flash both of them over.
message brought to you by my GalaxyS3

Make a backup, ODIN back to stock rooted, then reflash recovery and restore

CNexus said:
Make a backup, ODIN back to stock rooted, then reflash recovery and restore
Click to expand...
Click to collapse
I was gonna tell him that, but I figured with all the issues he was having, it was better to start from scratch.
message brought to you by my GalaxyS3

[Q] which TWRP?

Hi everyone. Just guy my note tablet. Rooted with towlie.
Build number kot49h.p607tuvuane2
Finding a bit of confusion on which TWRP I should install. I did one with Odin, and it didn't take.
Can someone point me to right file and/or directions if i need to downgrade first?
I want to start playing and customizing, but cannot back up or reflash.

redheadplantguy said:
Hi everyone. Just guy my note tablet. Rooted with towlie.
Build number kot49h.p607tuvuane2
Finding a bit of confusion on which TWRP I should install. I did one with Odin, and it didn't take.
Can someone point me to right file and/or directions if i need to downgrade first?
I want to start playing and customizing, but cannot back up or reflash.
Click to expand...
Click to collapse
most stable version would be 2.6.3.3

buhohitr said:
most stable version would be 2.6.3.3
Click to expand...
Click to collapse
Have heard a few things about needing an Odin firmware downgrade. Is that necessary with my firmware? And should I use Odin, or ADB?
Really appreciate the info. I want to tinker, but without working recovery, I'm a bit Leary.

redheadplantguy said:
Have heard a few things about needing an Odin firmware downgrade. Is that necessary with my firmware? And should I use Odin, or ADB?
Really appreciate the info. I want to tinker, but without working recovery, I'm a bit Leary.
Click to expand...
Click to collapse
the version I stated is most stable, other twrp version may cause cache corruption and other issues.

buhohitr said:
the version I stated is most stable, other twrp version may cause cache corruption and other issues.
Click to expand...
Click to collapse
the closest release i could find was twrp 2331.
i flashed with odin. but when i tried to reboot to recovery, i got a scrambled, pixelated screen which after a few seconds rebooted system.

redheadplantguy said:
the closest release i could find was twrp 2331.
i flashed with odin. but when i tried to reboot to recovery, i got a scrambled, pixelated screen which after a few seconds rebooted system.
Click to expand...
Click to collapse
Get it here http://www.techerrata.com/browse/twrp2/lt03wifiue
You need to wipe cache, davik cache and data, then flash the rom.

buhohitr said:
Get it here http://www.techerrata.com/browse/twrp2/lt03wifiue
You need to wipe cache, davik cache and data, then flash the rom.
Click to expand...
Click to collapse
I found that version on the link, but i thought that was for the Exynos chipset.
I have the Qualcomm LTE version. Will it still work?

redheadplantguy said:
I found that version on the link, but i thought that was for the Exynos chipset.
I have the Qualcomm LTE version. Will it still work?
Click to expand...
Click to collapse
For Qualcomm LTE the version is 2.6.3.1
https://goo.im/devs/OpenRecovery/lt03ltexx/openrecovery-twrp-2.6.3.1-lt03ltexx.zip/

Hi,
This post saved me, I installed TWRP 2.8 and my system froze, I couldn't get past the Samsung 10.1 screen.
But found this post and flashed 2.6.3.3 via Odin and it all went smoothly.
PS Goo.img.com dosen't have the files anymore

buhohitr said:
For Qualcomm LTE the version is 2.6.3.1
https://goo.im/devs/OpenRecovery/lt03ltexx/openrecovery-twrp-2.6.3.1-lt03ltexx.zip/
Click to expand...
Click to collapse
I currently have no recovery. I tried flashing 2.8 originally.
How would i clear cache, data, and all before trying to flash 2631?

redheadplantguy said:
I currently have no recovery. I tried flashing 2.8 originally.
How would i clear cache, data, and all before trying to flash 2631?
Click to expand...
Click to collapse
No, you flash TWRP 2631, then boot into the twrp then select advance then put a check for cache, davik cache and data, then swipe. Once done just flash your rom. I would copy the rom to the download folder on the internal storage (/sdcard/download/) before flash your new twrp.

Is 2.6.3.3 more reliable / stable in terms of making / restoring nandroids? I just got my new Note last week (p607t) and flashed xKat with TWRP at one point, restoring apps from (some with data to avoid re-entering account info or redoing complex settings...) I have had one problem however, when I was almost done restoring, I noticed that I was getting fc's, particularly with games that required an internet connection. I wiped dalvik and cache in TWRP, then hit fix permissions, which I think screwed everything up (maybe due to the bootloader / firmware base mismatch). Anyway, my most recent nandroid was with the fresh xKat install, but fixing permissions caused this weird "hot"-bootloop where it skipped the boot animation but start loading immediately after rebooting, but then freezing before all boot tasks had completed (ex. some optimizations on boot with Android Tuner Pro, FolderMount mounting folders, loading xposed modules...)
Not wanting to re-restore, I first just tried dirty-flashing the ROM again (only wiped dalvik and cache, but did something I hadn't tried before: in the wipe menu I hit "repair partition" for system and data, pre-flash). Luckily it worked and set everything straight... but just want to make sure, 2.6.3.3 is still recommended as the most stable version (in my experience, fixing permissions in recovery can be very hit or miss on any version)?
2 questions before I roll back my recovery, I think these "killer features" (totally serious, #2 has been huge since I got a couple of the newish flash drives with micro usb on one side and regular usb on the other) of TWRP were implemented in 2.6.3.3, but just want to make sure: can you 1) compress nandroids and 2) mount a USB OTG drive and flash from or backup to it? Thanks all, really loving my new Note (massive upgrade from my Note 8!)

buhohitr said:
No, you flash TWRP 2631, then boot into the twrp then select advance then put a check for cache, davik cache and data, then swipe. Once done just flash your rom. I would copy the rom to the download folder on the internal storage (/sdcard/download/) before flash your new twrp.
Click to expand...
Click to collapse
I HAVE flashed 2631 for the qualcomm lte.
I've done or several times since you told me that's the best version.
IT WILL NOT BOOT INTO TWRP. it's a scrambled screen. That's all. No touch options. No check boxes. After a minute, tablet reboots itself. I am on stock firmware still. Rooted.
Maybe I should just try CWM. never had this much problems with twrp on any other device.

redheadplantguy said:
I HAVE flashed 2631 for the qualcomm lte.
I've done or several times since you told me that's the best version.
IT WILL NOT BOOT INTO TWRP. it's a scrambled screen. That's all. No touch options. No check boxes. After a minute, tablet reboots itself. I am on stock firmware still. Rooted.
Maybe I should just try CWM. never had this much problems with twrp on any other device.
Click to expand...
Click to collapse
How about wipe cache/davikcache/data with your stock recovery (just reflash your stock recovery). After that let it boot up, then power down and flash twrp. Once done, don't boot up, boot back to twrp . Let me know how it goes.

Cool. I can try that when I get home. Do you have a link handy for the stock recovery?

redheadplantguy said:
Cool. I can try that when I get home. Do you have a link handy for the stock recovery?
Click to expand...
Click to collapse
Please try this twrp. Many ppl reported it's working for p607t.
http://forum.xda-developers.com/showpost.php?p=53138918&postcount=776
If not working then we will go for stock recovery.

buhohitr said:
Please try this twrp. Many ppl reported it's working for p607t.
http://forum.xda-developers.com/showpost.php?p=53138918&postcount=776
If not working then we will go for stock recovery.
Click to expand...
Click to collapse
THANK YOU SO MUCH! TWRP booted right up, and nandroid in progress. now I'll be able to try some custom ROM's and play in system.
:laugh: