Related
Hi
I was flashing back to Stock from task650 to fix my gps. Well something blew up and when the phone reboots the screen goes black but I hear the AT&T start-up tune. Essentially I can't get to enable USB debugging to reflash. I can get to download or recovery, but there are no files to recover<?> and busybox never got installed.
What do I do now?
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
CZ Eddie said:
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
Click to expand...
Click to collapse
Yes I have stock recovery. Odin is of no use because it hangs waiting for the USB debug to respond. And i can't turn it on because the screen is black and I can't navigate
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
xBeerdroiDx said:
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
Click to expand...
Click to collapse
Thanks. I created an emergency tool kit on an SD, I wiped data, wiped cache and Davlik and formated system. Flashed the stock rom. When I rebooted it now hung at the Samsung Galaxy S III screen.
How do I get out of this mess?
Try wiping data and cache again in recovery
xBeerdroiDx said:
Try wiping data and cache again in recovery
Click to expand...
Click to collapse
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
BertMor said:
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
Click to expand...
Click to collapse
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
xBeerdroiDx said:
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
Click to expand...
Click to collapse
When it rains it pours. Now I can't get into recovery. I get the empty battery graphic cycling on and off, and its very warm to the touch. I think the battery is not charging.
I tried using Odin and flashed a stock rom but I kept getting verification errors and status 7 errors. Things just are not taking. I fear I've got a hard brick and I don't know what to do to fix it.
I appreciate your help
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
xBeerdroiDx said:
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
Click to expand...
Click to collapse
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
it might indeed be drained. leave it plugged in for a while and report back.
you were getting the error/status 7 messages after you flashed cwm back on it likely because the cwm wasnt up-to-date.
what was the last thing you tried before it stopped working altogether?
It gets really hot if I leave it plugged in. But it seems like I can get into recovery again. The last thing I flashed was CMW 6.0.3.1. But what is on it now is CMW 5.5.0.4
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
BertMor said:
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
Click to expand...
Click to collapse
xBeerdroiDx said:
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
Click to expand...
Click to collapse
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
BertMor said:
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
Click to expand...
Click to collapse
Well I think I managed it!. First I tried to install an update d/l'ed from Dropbox and that did nothing. Then I flashed an old .tar that was a rooted stock and it rebooted!
I tried editing the updater-script but I couldn't getit to save the changes properly.
Well I will now re flash the RM and CWM and hope for the best
Thanks for all your help, greatly appreciated
Hi all, today my phone was acting very strange so I decided to do a factory wipe.
Afterwards I tried to boot my phone and it just sat on the samsung screen.
I then decided to wipe everything and restore a back-up of a different rom.
The install of the back-up failed.
I tried to install a fresh rom and it failed.
I am getting these errors in twrp.
E: error opening ' /data/data/com.sec.spen.flashan
E: error: I/O error
E: error opening ' /data/data/com.sec.spen.flashan
E: error: I/O error
E: error opening ' /data/data/com. samsung. android
E: error: not a directory
E: error opening ' /data/data/com. samsung. android
E: error: I/O error
I am not sure what to do at this point.
I was on Smoothest Note 2/3 Rom and running twrp.
Any help is GREATLY APPRECIATED.
You need to read the last few pages of the thread.
1. Possibly billiards factory reset
2.philz recovery
3. Lots of wiping..
Read the thread.. Last few pages at least. Post if you are still hung up.
Ron36 said:
Hi all, today my phone was acting very strange so I decided to do a factory wipe.
Afterwards I tried to boot my phone and it just sat on the samsung screen.
I then decided to wipe everything and restore a back-up of a different rom.
The install of the back-up failed.
I tried to install a fresh rom and it failed.
I am getting these errors in twrp.
E: error opening ' /data/data/com.sec.spen.flashan
E: error: I/O error
E: error opening ' /data/data/com.sec.spen.flashan
E: error: I/O error
E: error opening ' /data/data/com. samsung. android
E: error: not a directory
E: error opening ' /data/data/com. samsung. android
E: error: I/O error
I am not sure what to do at this point.
I was on Smoothest Note 2/3 Rom and running twrp.
Any help is GREATLY APPRECIATED.
Click to expand...
Click to collapse
Twrp does not backup or restore tw 4.3 or any 4.4 properly. Best bet is install philz 6.07.9 and flash fresh.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Twrp does not backup or restore tw 4.3 or any 4.4 properly. Best bet is install philz 6.07.9 and flash fresh.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks to all who replied.
Ron36 said:
Thanks bud.
I am looking for the philz download for my device but I dont see it here.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
You think you could assist a bit more?
EDIT.. is it this file? philz_touch_6.07.9-l900.zip
Thanks to all who replied.
Click to expand...
Click to collapse
That link looks right "L900" except it looks like this "l900"
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900
ColeTrain! said:
That link looks right "L900" except it looks like this "l900"
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900
Click to expand...
Click to collapse
I installed philz and installed a ver of jellybomb and Im again stuck on the samsung screen.
what should I do?
Ron36 said:
I installed philz and installed a ver of jellybomb and Im again stuck on the samsung screen.
what should I do?
Click to expand...
Click to collapse
Ron.
The thing that is probably going on is that bits of data are left over. We need to clean.
Process A is this link. And we should still do process B but, this is the deep clean
http://forum.xda-developers.com/showthread.php?t=2086769
Process B.
-Install philz. Some people have luck, i didn't. I don't think it works with 4.3
-"format " select data, cashe, sdcard. Not sdcard1 (cuz that is your external) and etc
Reboot recovery
Wipe cashe, wipe dalvidec, wipe for new rom, wipe factory reset.
Don't restore anything old that isn't 4.3... Or flash new 4.3
If you want to try process B first, it may be all you need. But if it doesn't work, do all of it.
Jlmancuso is your goto if that doesn't work. The samsung screen does take a few minutes, be patient.
I hope this helps.
ColeTrain! said:
Ron.
The thing that is probably going on is that bits of data are left over. We need to clean.
Process A is this link. And we should still do process B but, this is the deep clean
http://forum.xda-developers.com/showthread.php?t=2086769
Process B.
-Install philz. Some people have luck, i didn't. I don't think it works with 4.3
-"format " select data, cashe, sdcard. Not sdcard1 (cuz that is your external) and etc
Reboot recovery
Wipe cashe, wipe dalvidec, wipe for new rom, wipe factory reset.
Don't restore anything old that isn't 4.3... Or flash new 4.3
If you want to try process B first, it may be all you need. But if it doesn't work, do all of it.
Jlmancuso is your goto if that doesn't work. The samsung screen does take a few minutes, be patient.
I hope this helps.
Click to expand...
Click to collapse
thanks bud!!
I was finally able to install the latest smooth rom w/o aroma but I am getting this error when the phone boots up.
UIDS on the system are inconsistent, you need to wipe your data partition or your device will be unstable. with a tab that say im feeling lucky. I selected that and all seems fine but i cannot turn on my wifi.
sorry to be a pain, but what should I do?
EDIT........
I found the wifi fix and it is now working, but I am still getting the error on start up about the data partition.
what should I do?
Ron36 said:
thanks bud!!
I was finally able to install the latest smooth rom w/o aroma but I am getting this error when the phone boots up.
UIDS on the system are inconsistent, you need to wipe your data partition or your device will be unstable. with a tab that say im feeling lucky. I selected that and all seems fine but i cannot turn on my wifi.
sorry to be a pain, but what should I do?
EDIT........
I found the wifi fix and it is now working, but I am still getting the error on start up about the data partition.
what should I do?
Click to expand...
Click to collapse
Follow the steps he provided. Proper wiping is super important.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Follow the steps he provided. Proper wiping is super important.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sent you a pm.
Thanks some more!
Ron36 said:
Sent you a pm.
Thanks some more!
Click to expand...
Click to collapse
Here is how to do a clean wipe, just remember you r doing like format the comp. hard drive and install new OS. I see u have Philz now. Boot into Philz then go to Mounts and Storage and pick format /data and /data/media (/sdcard). Once done pick: format /system. done pick format /preload. Then go back and chose Wipe Cache Partition. Once it finish, pick Wipe Data/Factory Reset. First, pick Wipe Data/Factory Reset. When finish, pick Clean to Install a New ROM. Then Reboot back into RECOVERY and now you can install any rom of your choice in the external sdcard (showned as sdcard1 in Philz). If it's still not working, use Philz to install the back to unrooted stock MC2 by Billard412 and follow my steps in the other thread. The reason I said this because I have to note 2. Once is fine with whatever wipe. The other had to go back to MC2 and upgrade to MK4 then rooted through CF Auto Root and install TWRP then Philz then wipe everything in the above steps then everything is fine with a hitch.
na_tra said:
Here is how to do a clean wipe, just remember you r doing like format the comp. hard drive and install new OS. I see u have Philz now. Boot into Philz then go to Mounts and Storage and pick format /data and /data/media (/sdcard). Once done pick: format /system. done pick format /preload. Then go back and chose Wipe Cache Partition. Once it finish, pick Wipe Data/Factory Reset. First, pick Wipe Data/Factory Reset. When finish, pick Clean to Install a New ROM. Then you can install any rom of your choice in the external sdcard (showned as sdcard1 in Philz). If it's still not working, use Philz to install the back to unrooted stock MC2 by Billard412 and follow my steps in the other thread. The reason I said this because I have to note 2. Once is fine with whatever wipe. The other had to go back to MC2 and upgrade to MK4 then rooted through CF Auto Root and install TWRP then Philz then wipe everything in the above steps then everything is fine with a hitch.
Click to expand...
Click to collapse
Thanks for the help. I now have my note2 back up fully and I am back on a jellybomb rom. not sure if i will go back to a 4.3 rom as I never had this many issues on ANY phone on any rom on any OS.
Keep up the good work helping the slow members like myself.
Ron36 said:
Thanks for the help. I now have my note2 back up fully and I am back on a jellybomb rom. not sure if i will go back to a 4.3 rom as I never had this many issues on ANY phone on any rom on any OS.
Keep up the good work helping the slow members like myself.
Click to expand...
Click to collapse
Remember not to use TWRP to back up 4.3 and install it. It wont work. I always have the back to unrooted stock MC2 in the external sdcard just in case flashing the new rom wont work. I am glad you got your note 2 back. You should try out the Smoothest Note 2/3 1.3 tester. It is very stable and has alot of Note 3 features.
na_tra said:
Remember not to use TWRP to back up 4.3 and install it. It wont work. I always have the back to unrooted stock MC2 in the external sdcard just in case flashing the new rom wont work. I am glad you got your note 2 back. You should try out the Smoothest Note 2/3 1.3 tester. It is very stable and has alot of Note 3 features.
Click to expand...
Click to collapse
I actually installed smoothest rom with TWRP with no issues until I started to use TWRP with Smoothest.
Ultimately it was my fault for not switching to Philz. I just had to many backups for TWRP and as I said I was able to install Smoothest from it so I thought all was good.
Is Philz compatible with the older roms or do I need to keep switching recoveries?
Ron36 said:
I actually installed smoothest rom with TWRP with no issues until I started to use TWRP with Smoothest.
Ultimately it was my fault for not switching to Philz. I just had to many backups for TWRP and as I said I was able to install Smoothest from it so I thought all was good.
Is Philz compatible with the older roms or do I need to keep switching recoveries?
Click to expand...
Click to collapse
you r fine to install any rom with TWRP. but if you use it for back up and then restore the MK4, it just wont work. I am not sure about Philz and older rom. So cant tell you.
na_tra said:
you r fine to install any rom with TWRP. but if you use it for back up and then restore the MK4, it just wont work. I am not sure about Philz and older rom. So cant tell you.
Click to expand...
Click to collapse
Philz is good for everything. It will work for every rom and it will even restore your twrp backups. If you used 6.07.9 the option for twrp is under backup/restore then misc options.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Ron36 said:
thanks bud!!
I was finally able to install the latest smooth rom w/o aroma but I am getting this error when the phone boots up.
UIDS on the system are inconsistent, you need to wipe your data partition or your device will be unstable. with a tab that say im feeling lucky. I selected that and all seems fine but i cannot turn on my wifi.
sorry to be a pain, but what should I do?
EDIT........
I found the wifi fix and it is now working, but I am still getting the error on start up about the data partition.
what should I do?
Click to expand...
Click to collapse
You inspired me to start this thread. Still a work in progress.
http://forum.xda-developers.com/showthread.php?t=2648855
ColeTrain! said:
You inspired me to start this thread. Still a work in progress.
http://forum.xda-developers.com/showthread.php?t=2648855
Click to expand...
Click to collapse
Glad I could help. LOL
Ron36 said:
Glad I could help. LOL
Click to expand...
Click to collapse
Its finished. I have solicited some people more knowledgeable to proofread, are you up and running well?
ColeTrain! said:
Its finished. I have solicited some people more knowledgeable to proofread, are you up and running well?
Click to expand...
Click to collapse
I was last night, but now not so much. My phone is trying to hands free activate unsuccessfully and my data connection does not work. My GPS may not be working also.
I have tried a factory and data wipe and reinstalled the rom. I also called sprint for help but nothing they suggested worked.
I'm at a loss as what to do next. What do you suggest?
Hi,
I was frustrated with the delay in T-Mobile's release of KitKat for the GSIII, so I decided to root my phone last night in order to try flashing CM11 on it. Rooted my phone with Towelroot, installed ROM Manager and CWM, and created backups on Kies and through CWM. Then I proceeded to do data wipe/factory reset, cache wipe, and /system format. Tried to flash CM11, but got a status 7 error.
I freaked out, so I decided to restore everything from the backup I'd created. Restoration seemed like a success, but now I get the error "Unfortunately, the process com.google.process.gapps has stopped" in an endless loop, and it prevents me and any apps from doing anything. I tried clearing dalvik cache in recovery, but the problem still persists. Read on a few threads that I should flash to stock firmware via Odin, but I'm currently on a macbook, so I can't install it.
tl;dr - Prepped to flash CM11, reached status 7 error, got freaked out, and did restore via CWM, only to get infinite loop of gapp crashes. No access to Odin or PC. Not hard bricked or soft bricked, but essentially useless phone. Help? );
if you can still get to recovery, download latest gapps and flash that
Did you factory reset before or after you restored your back up?
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Try to factory reset again
vvnn said:
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Click to expand...
Click to collapse
If I'm not mistaken, there is some device ID that will change each time you flash a new rom. It may be something to do with this ID not matching the one in the restored data. Purely a guess but seems logical to me.
Anyway, factory resetting will most likely solve this for you, but I wanted to add that except in certain circumstances, you shouldn't ever manually format /system. (and one format on any partition is sufficient. There shouldn't be any need to format multiple times). If you format /system, you are wiping the O/S off of your device. Then what happens if you have problems flashing a rom, or firmware? I've seen it happen many times and I often end up spending a couple of days working with them just to get the thing to boot up again!
When you flash a rom, the first thing it does is format /system. So there is just no need to do this manually. At least if the rom fails to flash (such as failing the assert checks), youll still have something to boot into. Hope this helps in the future!
I have had the exact same issue. I have a Samsung note 2 N7105. I rooted made a backup in CWM and flashed ditto n3/s5 rom made another backup in CWM. No issues. Got a bit cocky seen as it was my first time doing anything like that. My next adventure was to try a custom kernel (agni). This didn't go so well, so I tried to do a restorw to my working backup of ditto n3/s5 rom through CMW. restore went smoothly and the phone booted. once I opened the lock screen I got the gapps error as described. I had to do a factory reset to get the phone working and then re-flashed ditto n3/s3. I've since flashed other roms and when ever I try to do a restore, I get the issue described. Note I am using the latest CWM. I putting off flashing and trying any other ROMs because of this issue. I do love dn3/s5 but id love to try others. Anyone can help it would be appreciate.
Well im somewhat new to rooting etc, so while I was in twrp I accidentally hit the format button assuming it would give me options and I formatted the internal SD, I could not Re partition it, So I formatted everything and installed a new and clockwork mod(some said that would fix it), attempted to reformat it and partition it, i couldn't, it wouldn't even recognize so after trying everything I could, I just made the problem worse and worse, now clockwork mod wont even go back, like I literally cant go back, It just crashes when I try to go back, Whenever I try to flash from Odin to the phone, trying to with clockwork mod, it still seems corrupted, so its been sitting on my desk for a week, I've been trying to fix it for two, so being the stereotypical guy, the last thing I do, I ask for help, So please, Help?
BrandonSnoog said:
Well im somewhat new to rooting etc, so while I was in twrp I accidentally hit the format button assuming it would give me options and I formatted the internal SD, I could not Re partition it, So I formatted everything and installed a new and clockwork mod(some said that would fix it), attempted to reformat it and partition it, i couldn't, it wouldn't even recognize so after trying everything I could, I just made the problem worse and worse, now clockwork mod wont even go back, like I literally cant go back, It just crashes when I try to go back, Whenever I try to flash from Odin to the phone, trying to with clockwork mod, it still seems corrupted, so its been sitting on my desk for a week, I've been trying to fix it for two, so being the stereotypical guy, the last thing I do, I ask for help, So please, Help?
Click to expand...
Click to collapse
Well I fixed it, I updated my cwm through odin, but I still can't mount /sdcard ive tried formatting ive tried reinstalling, any ideas?
BrandonSnoog said:
Well I fixed it, I updated my cwm through odin, but I still can't mount /sdcard ive tried formatting ive tried reinstalling, any ideas?
Click to expand...
Click to collapse
Try flash this Rom which has root access built into it
Also, I recommend you use TWRP recovery (flashable zip) instead since it's UI and features are better than CWM(I think the author had discontinued the project)
LimeliME said:
Try flash this Rom which has root access built into it
Also, I recommend you use TWRP recovery (flashable zip) instead since it's UI and features are better than CWM(I think the author had discontinued the project)
Click to expand...
Click to collapse
Tried it and only goes to the Samsung logo and goes into a reboot cycle. Still no luck.
BrandonSnoog said:
Tried it and only goes to the Samsung logo and goes into a reboot cycle. Still no luck.
Click to expand...
Click to collapse
Did you do a clean flash ? (Factory reset then flash the Rom)
Or try wipe the internal SD Card (backup your data first) then flash the Recovery Zip (first) then the Rom (Second), finally the Gapps (third)
LimeliME said:
Did you do a clean flash ? (Factory reset then flash the Rom)
Or try wipe the internal SD Card (backup your data first) then flash the Recovery Zip (first) then the Rom (Second), finally the Gapps (third)
Click to expand...
Click to collapse
Formatted and wiped both manually and using infamous cache wipe and the infamous super wipe, then using odin flashed an md5 of twrp 2.8.5 then used twrp to flash the rom you sugested and then gapss, still stuck on a reboot loop.
BrandonSnoog said:
Formatted and wiped both manually and using infamous cache wipe and the infamous super wipe, then using odin flashed an md5 of twrp 2.8.5 then used twrp to flash the rom you sugested and then gapss, still stuck on a reboot loop.
Click to expand...
Click to collapse
Did you "flash" the recovery ? If no then try to flash the recovery instead....
If all above didn't work for you, then I suggest you to odin back to the stock Rom
I'm having some issues flashing any ROM. TWRP will not wipe data, or internal SD
For some reason, when I go to wipe data and factory reset, TWRP will say it was successful, but nothing ever gets wiped. It will only wipe system if I choose to. I've gotten a ROM to flash but when it boots up, all of the old apps and user data are still there and it makes everything crash. I've gotten into settings to do a reset, it reboots into recovery, runs the script, and still nothing wipes.
What I have tried:
Old TWRP, newest TWRP
CWM (seems to wipe but it won't get past the note 2 screen after flashing anything)
Wiping with CWM, flashing TWRP, then flashing a ROM (still loops after the note 2 screen)
Is there a terminal command I can use in TWRP to manually wipe things?
Thanks for any help I can get, I've flashed so many phones I can't remember but I've never had this issue
Maybe flash back to a stock ROM, factory wipe using stock recovery, then flash TWRP?
audit13 said:
Maybe flash back to a stock ROM, factory wipe using stock recovery, then flash TWRP?
Click to expand...
Click to collapse
Well when it bootloops t the Note 2 screen, I have to flash a ROM with Odin to get it working again. I've flashed a stock ROM with Odin, flashed TWRP with Odin, tried the wipes and it never wipes anything... I'm lost...
Isn't there a format function in TWRP that is seperate from the factory reset or advanced wipes? I was also trying to find a terminal command to type in the terminal in TWRP... I'm a little stumped...
I'm sorry, I read that too fast... That may actually work, wipe it in the stock recovery, and just don't let it boot into the system before flashing other stuff... I'm gonna try that out... Thanks man, I'll post back about it...
Since you are flashing the phone with Odin, is it a stock 4.1.1 ROM you're flashing? Which custom ROM are you flashing to the phone?
audit13 said:
Since you are flashing the phone with Odin, is it a stock 4.1.1 ROM you're flashing? Which custom ROM are you flashing to the phone?
Click to expand...
Click to collapse
The stock ROM I used is I317-ODIN-UCUCNJ1-Stock without the booloader packaged in, I'm still on the old bootloader. It's 4.4.2
The ROMS I've tried to flash was
Cyanide (Error 7, says incompatible data, please wipe the phone)
Resurrection Remix (Error 7, says incompatible data, please wipe the phone)
Latest CM10 Nightly
I got CM10 and Resurrection Remix to flash a couple times, but the phone boots and all the old apps and data, including the AT&T ones are still there, and the system keeps crashing. Then I change the recovery to CWM because it seems to wipe, change back to TWRP, flash the ROM and gapps again, but it bootloops at the Note 2 screen.
Should I try the 4.1.1 ROM and CWM? Whenever I'm going from a stock TW to non-TW I like to format everything, data, cache, system, and internal SD, but of course TWRP won't wipe the data or the internal SD.
It's probably because the bootloader and modem are too old for the roms. Recent roms will need updated bootloaders.
Ok, I had some more time to mess around with this today and figured it out. I feel kind of dumb but oh well, I got it.
TWRP was already loaded on, so I went to messing with it again. The 'Swipe to factory reset' was not wiping the data, and there was the 'Format Data' button right there in front of me. I did the factory reset, format data, rebooted recovery, wiped dalvik, cache, and system, then flashed the ROM and everything booted up just fine.
Thanks for all of the help!