Develop Bugs

[Q] HELP, Flashing Stock rom isnt helping SOFT BRICK

when i turn my phone on i get a bootloop and no access to cwm or regular recovery mode etc. i can still get into recovery mode and i've flashed the stock rom and im still stuck any suggestions? really need help

http://forum.xda-developers.com/showthread.php?t=1924228

mrhaley30705 said:
http://forum.xda-developers.com/showthread.php?t=1924228
Click to expand...
Click to collapse
seems to be just about my issue downloading hopefully it works thank you ahead of time

<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> NON-HLOS.bin
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
i got an error in odin and didnt work any other suggestions?
for more background i was running cm10 jelly bean and i flashed a stock rom injected with root stuff so yup

Try the stock ROM, without injected root.

mrhaley30705 said:
Try the stock ROM, without injected root.
Click to expand...
Click to collapse
I did, i initially ran the injected one. right now i have the original rom flashed.

Your not trying to flash an att ROM on a Canadian device, or vice versa?

i'm flashing with the i747 verison for at&t my carrier. i'm seriously considering just hard bricking it and giving it to at&t

[Q] "Firmware upgrade encountered an Issue" ODIN PROBLEMS

This was originally posted in the wrong forum. My apologies.
So after following this link: http://www.cnet.com/how-to/how-to-ro...ung-galaxy-s3/ I have a bricked device.
No matter what I do, Odin seems to fail. This is what I think caused the problem in the first place. Also there is the possibility that the guide is way out of date.
So I was wondering if anyone had any advice on how to proceed? The device isnt mine and this isnt my first time rooting a device. I just have never bricked anything before.
Here is the log from ODIN from recreating the process in the link above
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here is the Log from ODIN from my latest attempt to flash something at it.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried flashing a full image, but it gives this error
Code:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried flashing the "stock" image.
Going to try a different PC tomorrow and hope that I get a different result.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Do you have an i747 or u747m? Do not flash any more ROMs without knowing the bootloader version installed on your phone. If you phone has a 4.3 or newer bootloader and you try to downgrade it, it will brick your phone.
I recommend that you install the latest version of Philz and flash cm10.2 for the d2att to at least get your phone running so you can determine the bootloader.

audit13 said:
Do you have an i747 or u747m? Do not flash any more ROMs without knowing the bootloader version installed on your phone. If you phone has a 4.3 or newer bootloader and you try to downgrade it, it will brick your phone.
I recommend that you install the latest version of Philz and flash cm10.2 for the d2att to at least get your phone running so you can determine the bootloader.
Click to expand...
Click to collapse
SGH-i747
And the issue I am encountering is a bit bigger than that, I cant install anything. I cant even flash the stock .tar file I found. I cant get ODIN to do anything except fail? I never even got CWM installed.

Can you get into download mode and stay in download mode?
There is not stock tar.md5 ROM you can flash from sammobile because AT&T never made a stock ROM available after 4.1.1.
Did you try to flash Philz Touch for the d2lte in Odin 3.07 using his tar.md5 recovery file? What about TWRP?

No TWRP either?
Can you provide me a link to that MD5

After digging up the MD5 I have got the phone booting again.
Thank you so much for all your help!

[Q] URGENT Stuck in bootloop s6812

Ok, so yesterday i was trying to flash a custom rom on my Fame DUOS s6812i, the phone wasn't rooted or anything, so i did the process of rooting and everything via odin following the tutorial in this thread http://forum.xda-developers.com/showthread.php?t=2582851 and when i flashed the files for root and the recovery i got stuck in a bootloop, now i cant start the phone (obviously), i have no access to the recovery, all i can do is enter the download mode, So i tried to flash the stock firmware with odin and i keep getting this error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6812DDAMG3_S6812ODDAMG3_S6812DDAMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> BcmCP.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And in the screen of the phone shows twice this message : Secure: Signature Verification failed
Honestly i dont know what to do now, Kies just keep connecting and telling me to reset the phone, odin gives me this message, tried flashing kernel and recovery and it does not works, ive tried with 3 different firmwares from sammobile and the same. PLEAAAASSSEEEE! help me im kinda losing it over this and i dont know what to do.

are you install with the correct firmware ?

[Q] help and need some info about gt-19192 unbrick

im new user of samsung my brother mobile once didnt wanna to start the rom then i try the odin to flash it didnt wanna to flash or start rom stuck on battry screeen only no recoery or anthing just download mode and not working to i restart it many times once it open rom and give me update 1 of 2 then it finsh and close and didnt start i flash roms but field i tried to flash recovery but gave me in all <ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-6.0.5.1-serranodsdd.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
but it flash the pit file successful the only file so what can i do ??
if the debrick.img will help me or download another rom or what ?
(im useing original usb of samsung and htc and the drivers updated and my windows win 10 and xp and i use all usb port and odin 3.10.6 1.8 3.7 and Heimdall Suite stuck in the same as odin )

Download Samsung stock firmware from Sammobile.com and flash it through odin 3.09
Go to download mode (vol down + home+ power). Then press vol up
Extract the downloaded zip file, u will get a .tra.md5 file
Add that file to the PDA, it will take few seconds. Repartition and F.Reset time check box should be UNCHECKED.
Then press the start button.
First boot will take some time (25 mins)
Wipe factory data and cache partition.
Sent from my GT-I9195 using XDA Free mobile app

oky im downloading now how to know the witch the stock firmware of my device
Odin mode
product name: gt-i9192
current binary:custom
system kernel: custom
Knox kernel lock: 0x0
Knox warranty void: 0x1
csd-config-lsb: 0x30
boot loader AP swrev: 2
write protection: enable
Click to expand...
Click to collapse
so any one or download any one ?

Shukry Faiz said:
Download Samsung stock firmware from Sammobile.com and flash it through odin 3.09
Go to download mode (vol down + home+ power). Then press vol up
Extract the downloaded zip file, u will get a .tra.md5 file
Add that file to the PDA, it will take few seconds. Repartition and F.Reset time check box should be UNCHECKE
Sent from my GT-I9195 using XDA Free mobile app
Click to expand...
Click to collapse
the same 2 roms
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9192UBUCOC2_I9192ZTRCOC2_I9192UBUCOC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

likenoother94 said:
the same 2 roms
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9192UBUCOC2_I9192ZTRCOC2_I9192UBUCOC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
First Reboot to Recovery and Wipe Data/Factory Reset, Wipe Cache and Dalvik Cache
then install rom through Odin
then all threads will be succeeded.

likenoother94 said:
the same 2 roms
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try to flash latest version of KitKat . I think u try to flash an older version on your phone that is why it fails at aboot ( bootloader )

SilviuMik said:
Try to flash latest version of KitKat . I think u try to flash an older version on your phone that is why it fails at aboot ( bootloader )
Click to expand...
Click to collapse
that's the 2 roms i download them from sammobile.com
I9192XXUBNB1_I9192OJVBNB1_EGY
I9192UBUCOC2_I9192ZTRCOC2_ZTR
if it not the right can u give me
the link of the rom :crying:

it stuck in recovery or boot loader or anything but the pit file alone goes succeed

likenoother94 said:
that's the 2 roms i download them from sammobile.com
I9192XXUBNB1_I9192OJVBNB1_EGY
I9192UBUCOC2_I9192ZTRCOC2_ZTR
if it not the right can u give me
the link of the rom :crying:
Click to expand...
Click to collapse
With COC it should have worked . I`m sorry no idea other then phone repair

SilviuMik said:
With COC it should have worked . I`m sorry no idea other then phone repair
Click to expand...
Click to collapse
dont have recovery ?? :crying: all i have odin mode @sajid0786

likenoother94 said:
dont have recovery ?? :crying: all i have odin mode @sajid0786
Click to expand...
Click to collapse
See these links if these help you
Check This
Check This

sajid0786 said:
See these links if these help you
Check This
Check This
Click to expand...
Click to collapse
nothing thankx for help :crying:

GT-N7100 not working - Nand rw corruption? - photos stuck in internal memory!

My friends Note 2 stopped working.
There are some important photos in the devices internal memory and that's actually the only reason why I (we) would want the phone back in some kind of working condition.
I've asked about this problem in two other threads, but no luck there.
Sorry for spamming, but I'd really need some help - even if it's just some wild ideas!
When powered on the phone gets stuck at the Samsung logo, to turn it off you have to pull the battery.
If I plug the phone to a charger, it only shows a static pic of a battery, but nothing else happens. If it gets unplugged, the pic stays on the screen (have to boot or pull battery).
The laptop reacts (first time installs the device) when the phone is turned on and connected via USB.
I can get to Odin mode, but if fails.
I can also get to System recovery, but no help there. It just shows a bunch of failed to mount -things and ADB does not work (it connects to pc in Adb sideload though).
No luck trying with different Odin and firmware nor recovery.
Tried different usb-cables and -ports. With and without external SD card.
Installed and uninstalled drivers and stuff.
I don't think the phone is rooted.
Could the problem be NAND rw corruption?
I am wondering if flashing the recovery package with the re-partition ticked and the .PIT file will erase the photos from the internal memory?
If I'd do wipe data/factory reset, what chances would I have to get even some of the photos recovered (and what would be good software for that)?
Or does anybody have any other ideas?
Odin says things like these:
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> NAND Write Start!!
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
_______________________________________
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
_________________________________
In recovery it just shows a bunch of failed to mount -things
The only important thing in this case would be to get the photos saved! But then again the owner of the phone doesn't have the extra money to pay for repair or spare parts etc.
If anyone could help, it would be much appreciated!