Hey everyone,
So I was flashing my cousins phone... and I asked him if it was a bell phone because his service is with bell turns out it was a Rogers phone that was unlocked. Now the phone says "Firmware issue encountered an issue. Please select recovery mode in kies & try again" I already tried flashing the Rogers stock firmware on there and no success. anyone have any tips?
When flashing the Rogers official rom again this is Odin's log.
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
hi, i'm trying flash a ROM to note 10.1 p605, it has Singapore ROM originally and im trying to flash German ROM
i get this error in Odin every time i try to flash:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P605XXUAMJ2_P605OJVAMI3_P605XXUAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Mashari_F said:
hi, i'm trying flash a ROM to note 10.1 p605, it has Singapore ROM originally and im trying to flash German ROM
i get this error in Odin every time i try to flash:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P605XXUAMJ2_P605OJVAMI3_P605XXUAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1) Have you tried to use an other usb port?
2) do you use the original usb cable?
3) do you have all the samsung drivers installed?
4) make eure that samsung kies is not running in the background
Hope it helps you
Gesendet von meinem SM-P600 mit Tapatalk
Got the same problem, so recovered it from kies
Skickat från min SM-P605 via Tapatalk
Hi... Anybody have a solution for this problem? Have the tablet returned from a service and tried to flash the recovery but it just doesn't work.
THanks a lot for any help.
ronaldphl said:
Hi... Anybody have a solution for this problem? Have the tablet returned from a service and tried to flash the recovery but it just doesn't work.
THanks a lot for any help.
Click to expand...
Click to collapse
Is it giving you a FAIL after flashing , or doesn`t show up after a successful flash.
If it doesn`t show up after flashing , re-flash but untick "Auto-Reboot" within odin before flashing & restart manually after flashing.
I have a "Fail after flashing" - complete (Write) - operation failed in Odin
Which odin
Hi,
When flashing with oder it depends on the package which oder will work.
At my p 605 the 1.86 version was working without probs.
The best is to use the Oden which is coming together the Roms Zipfile.
I hope this info helps please let me know.
Good luck
FSkyman said:
Hi,
When flashing with oder it depends on the package which oder will work.
At my p 605 the 1.86 version was working without probs.
The best is to use the Oden which is coming together the Roms Zipfile.
I hope this info helps please let me know.
Good luck
Click to expand...
Click to collapse
I tried all the possible combination... different Odin... different cables and ports... it just didn't work.
Since I read from a old post that flashing a original rom thru Odin helps... and i tried... Odin works and the rom can be flashed without prompting the signature verification failed error.
I suspect if Samsung has done something to make the recovery image fails...
I tried flashing the recovery using the stock recovery too and it failed as well
Recovery Flashing
ronaldphl said:
I tried all the possible combination... different Odin... different cables and ports... it just didn't work.
Since I read from a old post that flashing a original rom thru Odin helps... and i tried... Odin works and the rom can be flashed without prompting the signature verification failed error.
I suspect if Samsung has done something to make the recovery image fails...
I tried flashing the recovery using the stock recovery too and it failed as well
Click to expand...
Click to collapse
Now I am confused are you talking about recovery or rom ?
The only recovery I could get to work was the TWRP - this Zip file comes with a Odin that works.
Cwm philz are not working.
But keep in mind as soon you installed twrp your knox counter is tripped.
For rom flashing you have to wipe your tablet and then follow these instructions xxxx://www.droidgator.com/update-galaxy-note-101-sm-p605-android-43-xxubmj9-firmware/.
Before starting backup your tab then everything should be fine.
Thanks for your effort in helping me out...
Before I sent my tablet for servicing... I restored the tablet with Kies to the original factory setting and rom as I HAD rooted my P605 and flashed a custom rom before. [Although the Know count is 0*1 anyway.... but the service centre was kind enough to fix my tablet as it's a hardware failure instead of anything to do with the ROM ]
When I got my tablet back and tried to flash the TWRP into it, this problem surfaced. And I read from another post that some say flashing a Samsung original rom could help I tried but to no avail. Still I am waiting and looking for a solution.
I tried Odin 3.04 3.07 and 1.85 with the two versions of TWRP but still none of them work.
Cant flash Stock firmmware
Hi Guys
Tried all methods in the fourms but i am still not able to flash stock firmware from odin.
this is the error i get.
I am trying to update using Odin 3.09 as well as 3.07. but it is failing while writing system.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? Is this because this shows Write Protection : Enable?
nihalvm said:
Hi Guys
Tried all methods in the fourms but i am still not able to flash stock firmware from odin.
this is the error i get.
I am trying to update using Odin 3.09 as well as 3.07. but it is failing while writing system.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? Is this because this shows Write Protection : Enable?
Click to expand...
Click to collapse
---
Might you recall what the firmware version was before you started to flash this one?
I am also trying to recover from NC3 back to MJ4XAC and it is not allowing me to finish, Kies also does not recover the tablet. It looks like one of the filesystems is in a different state. With TWRP there are options to perform CHMOD on the file systems but I figure I have been mocking around long enough and for some reason beyond my experience the system is not responding.
Can you still get into ADB mode? That might be an option to see if you can gain access?
nihalvm said:
Hi Guys
Tried all methods in the fourms but i am still not able to flash stock firmware from odin.
this is the error i get.
I am trying to update using Odin 3.09 as well as 3.07. but it is failing while writing system.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? Is this because this shows Write Protection : Enable?
Click to expand...
Click to collapse
Is the sm-p605v (verizon) synonymous with sm-p605 for technical purposes? I am having identical problems with lt03ltevzw. Odin 3
aelaan said:
---
Might you recall what the firmware version was before you started to flash this one?
I am also trying to recover from NC3 back to MJ4XAC and it is not allowing me to finish, Kies also does not recover the tablet. It looks like one of the filesystems is in a different state. With TWRP there are options to perform CHMOD on the file systems but I figure I have been mocking around long enough and for some reason beyond my experience the system is not responding.
Can you still get into ADB mode? That might be an option to see if you can gain access?
Click to expand...
Click to collapse
Although it failed, I was able to recover using kies and use tablet as normal without data loss. It might be because at that point I had not rooted my tab and system state was still original in odin.
By the way I was on MJ4 xsa(AUSTRALIA) trying to install NC2 TGY(HONG KONG).
Now I have rooted it and have I installed NC2. I am still not sure what the issue was. But the only thing I did different was, first was using a virtual machine, but now did in an actual windows machine.
Can you please try this? If you can, install back NC2 using odin. Boot it once, then try recovering using kies. Kies recover mode gets your latest firmware based on your serial number. Not what firmware you are running.
Please post back the result. Interested to know the outcome.
Sent from my SM-P605 using XDA Premium 4 mobile app
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
Khazaad said:
Is the sm-p605v (verizon) synonymous with sm-p605 for technical purposes? I am having identical problems with lt03ltevzw. Odin 3
Click to expand...
Click to collapse
I don't think it is. Although the specs are the same, read somewhere that the internal partition structure for carrier branded firmware are different to generic. Don't remember where I read that. But can't confirm that either.
Sent from my SM-P605 using XDA Premium 4 mobile app
Okay, so I've been searching for hours, and can't seem to find anything.
I recently installed cyanogen, and rooted, and want to remove it.
I downloaded the stock rom, odin, everything.
When I go to do the odin thing, I get an error:
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash Pit:
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried everything. And don't know what else to do. Any help would be appreciated.
You have an i747 or i747m? What ROM were you running before trying to flash?
Did you check re-partition?
hey i have a rom installed on my note 2 n7100 model running v4.3 .... the rom is running but i found that i don't have a recovery mod [no philz/twrp].. i used to have philz but suddenly when the rom is flashed the recovery mod has gone
how can i get a recovery mod???
flashing recovery via odin didn't work and always failing
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
aboalghool said:
hey i have a rom installed on my note 2 n7100 model running v4.3 .... the rom is running but i found that i don't have a recovery mod [no philz/twrp].. i used to have philz but suddenly when the rom is flashed the recovery mod has gone
how can i get a recovery mod???
flashing recovery via odin didn't work and always failing
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
and other times odin stops responding,.,, im afraid my phone would get bricked every time i do this
You might have to flash a rom that includes the pit file it sounds like yours I'd corrupt. I think there is a rescue package on mskips toolkit
Sent from my GT-N7105 using Tapatalk
Hi, can you give me some advice? The phone is detected in odin - i.e. i can see in odins log:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
I used this official image: I9195XXUCOE4_I9195OXACOE1_I9195XXUCOE4_HOME.tar.md5 which is the standard german image, not provider specific.
After several tries it didnt work - i can also get into the recovery mode while pressing the volume down button, volume up button works but it wont boot that mode. The phone failed after i turned power off while an upgrade was performed (i thought it failed the upgrade , because i couldnt see any progress while the upgrade happend.)
Also i can not boot the phone without the batteery. I removed the sd and sim card.
Any ideas what i could do now ?
boot loader or recovery?
I dun know that recovery
flash team win one from here
https://forum.xda-developers.com/showthread.php?t=2678420
or clockworkmod 6.0.5.1
both working for me
dun matter what the prob is , but u need flash in download mode , volume down and power button + home
I dun think Odin can talk to your s4 in recovery mode ^^
And i dun know if i understood your prob xD