HI!
Now when it comes to features , the "flo" model is way better than nexus 7 (2012) BUT i saw that the previous model had the reaver and aircrack because of the bcm chipset inside .. are there any other similar apps in FLO except the pwn pad installation method....
When you say except the "pwn pad installation" you mean this method? http://forum.xda-developers.com/showthread.php?t=2577356.
If so, too bad, it's pretty damn cool.
mdamaged said:
When you say except the "pwn pad installation" you mean this method? http://forum.xda-developers.com/showthread.php?t=2577356.
If so, too bad, it's pretty damn cool.
Click to expand...
Click to collapse
yeah..maybe backtrack can be used????
samthechamp said:
yeah..maybe backtrack can be used????
Click to expand...
Click to collapse
What do you think Kali is?
mdamaged said:
What do you think Kali is?
Click to expand...
Click to collapse
i know its linux based ....i meant this method-
http://forum.xda-developers.com/showthread.php?t=2250461
samthechamp said:
i know its linux based ....i meant this method-
http://forum.xda-developers.com/showthread.php?t=2250461
Click to expand...
Click to collapse
No, Kali IS Backtrack, Backtrack IS Kali.
mdamaged said:
No, Kali IS Backtrack, Backtrack IS Kali.
Click to expand...
Click to collapse
so , reaver (or aircrack) is not yet compiled for flo?
samthechamp said:
so , reaver (or aircrack) is not yet compiled for flo?
Click to expand...
Click to collapse
Whether it is or not isn't the issue, the issue is getting the built-in wifi to go into monitor mode. There are claims that it has been done (assumign the hardward even supports monitor mode, one would have to use a kernel with a custom driver built in, or a kernel with loadable mod support which would load a custom module), you'll have to drudge through google and figure out if that has any merit or not, then work out how to implement it, if it's even viable.
mdamaged said:
Whether it is or not isn't the issue, the issue is getting the built-in wifi to go into monitor mode. There are claims that it has been done (assumign the hardward even supports monitor mode, one would have to use a kernel with a custom driver built in, or a kernel with loadable mod support which would load a custom module), you'll have to drudge through google and figure out if that has any merit or not, then work out how to implement it, if it's even viable.
Click to expand...
Click to collapse
i think it has been done .. after all the pwn pad method also uses elementax kernel .. the only thing which is stopping me is to buy tp-link adapter , which is out of stock for weeks in my country(india)...assuming flo has that hardware , isnt the built in chipset enough?
samthechamp said:
i think it has been done .. after all the pwn pad method also uses elementax kernel .. the only thing which is stopping me is to buy tp-link adapter , which is out of stock for weeks in my country(india)...assuming flo has that hardware , isnt the built in chipset enough?
Click to expand...
Click to collapse
I already addressed that in my last post.
mdamaged said:
I already addressed that in my last post.
Click to expand...
Click to collapse
any way i can install reaver or similar app w/o wifi adapter?
samthechamp said:
any way i can install reaver or similar app w/o wifi adapter?
Click to expand...
Click to collapse
The same way you install anything else on android, download the apk and install it, it does not matter if you have a supported adapter or not...it just won't be able to open a wlan in monitor mode.
Related
Is there a way to get openVPN on this phone. Ive seen a few roms for other phones that have it, but ive read i need some tun.ko driver and im not sure if theres one for this phone?
Rekzer said:
Is there a way to get openVPN on this phone. Ive seen a few roms for other phones that have it, but ive read i need some tun.ko driver and im not sure if theres one for this phone?
Click to expand...
Click to collapse
Going to have to wait for a kernel that becomes available that includes tun.ko support. None of them do yet.
manekineko said:
Going to have to wait for a kernel that becomes available that includes tun.ko support. None of them do yet.
Click to expand...
Click to collapse
How does DroidVPN work then?
this app will install it for you
Rekzer said:
How does DroidVPN work then?
Click to expand...
Click to collapse
it like and ip changer.. it keeps you anonymous to someone you don't want you location to be known to.. i have it currently install on my phone... my brother kind of retricted some webpages so it help me open them... lol:laugh:
Now that we are starting ports and custom roms I think we need to start working on OC'd Kernels and Ext4 and different running states(smartassv2 etc).
I read up on how to compile a kernel but i'm just to lazy for that at the moment.
blmvxer said:
Now that we are starting ports and custom roms I think we need to start working on OC'd Kernels and Ext4 and different running states(smartassv2 etc).
I read up on how to compile a kernel but i'm just to lazy for that at the moment.
Click to expand...
Click to collapse
If you did build a kernel it would be a hack of the HC one.. They havnt released an ICS kernel for our tab yet that Im aware of (unless they posted one already for the a200 for ICS).
Sent from my MB860 using XDA App
a Kernel with USB Host is to die for !!!
Raul77 said:
a Kernel with USB Host is to die for !!!
Click to expand...
Click to collapse
But then you wouldn't be able to use it .
crossix said:
If you did build a kernel it would be a hack of the HC one.. They havnt released an ICS kernel for our tab yet that Im aware of (unless they posted one already for the a200 for ICS).
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
They did post one for the a200: http://forum.xda-developers.com/showthread.php?t=1518014.
Theonew said:
But then you wouldn't be able to use it .
Click to expand...
Click to collapse
why not? i know the USB doesnt pass power but like for example Glitch Kernel for Captivate enabled it and u just need to use the Y cable to pass power to the port and u r in business.
Raul77 said:
why not? i know the USB doesnt pass power but like for example Glitch Kernel for Captivate enabled it and u just need to use the Y cable to pass power to the port and u r in business.
Click to expand...
Click to collapse
It was a joke. You said "a Kernel with USB Host is to die for !!!" If you "died for it", then you wouldn't be physically able to use it .
Theonew said:
It was a joke. You said "a Kernel with USB Host is to die for !!!" If you "died for it", then you wouldn't be physically able to use it .
Click to expand...
Click to collapse
hahahahah
It's possible to run linux on android (google app store) app. And install ubuntu on the app and run the same using chroot. Will this be possible in any of the new roms that are posted in the developers area? Thanks for your answer, this will be principal factor in my decision to buy this device.
pogo123 said:
It's possible to run linux on android (google app store) app. And install ubuntu on the app and run the same using chroot. Will this be possible in any of the new roms that are posted in the developers area? Thanks for your answer, this will be principal factor in my decision to buy this device.
Click to expand...
Click to collapse
I don't see why not, you could even port native Ubuntu over with a little effort since the 5420 soc already has Linux ports.
eousphoros said:
I don't see why not, you could even port native Ubuntu over with a little effort since the 5420 soc already has Linux ports.
Click to expand...
Click to collapse
if you have the device, would you be so kind to try, and confirm, the app and ubuntu is working fine. thanks in advance.
pogo123 said:
if you have the device, would you be so kind to try, and confirm, the app and ubuntu is working fine. thanks in advance.
Click to expand...
Click to collapse
http://releases.linaro.org/14.01/ubuntu/arndale-octa
eousphoros said:
http://releases.linaro.org/14.01/ubuntu/arndale-octa
Click to expand...
Click to collapse
Hmm. very interesting thanks for the info... Any hands on experience with "Complete Linux Installer" , "https://play.google.com/store/apps/details?id=com.zpwebsites.linuxonandroid&hl=en" Running Linux native in the device sounds interesting, but running ubuntu on the same within android is exactly what I need at this moment. In some of the devices that I use to have especially with a original rom this process is not supported. If any body had done this process in the device and could advise will be very helpful. Thanks in advance.
I'll give it a go on my Tab S 8.4 and report back...
pibach said:
I'll give it a go on my Tab S 8.4 and report back...
Click to expand...
Click to collapse
Thanks
Seems to work over VNC, not naively.
First attempt doesn't download the image, have to investigate...
pibach said:
Seems to work over VNC, not naively.
First attempt doesn't download the image, have to investigate...
Click to expand...
Click to collapse
just pull the trigger and buy one of this little tablet. will try and let everyone know if the installer works.
I tried it on the SM-T800 (WIFI) and it doesn´t worked at all because it cannot run the loop mode (?)
I´m trying linux on android for the first time so maybe someone can help me with it!
I need to figure out if it would be possible if i had another Kernel or another rom.
At the moment I´m running ThunderRom 800
Thanks in advance!
Maxiking
Same here. seems to need the ability to do a mount loop. any ideas.
I get "unable to create loopback device" error. Blows..
Does anybody knows the complete procedure to activate loop device on the smt800
Title says it all. Thanks!
Can anyone help with this?
You do know the Fire runs Android, and NOT Linux right?
If that answer is somehow unsatisfactory to you, than might I suggest you at least start with a Terminal Emulator.
I would have also assumed you have already rooted your AFTV2? 'cause if you hadn't, this will be a very short conversation.
Yes, but it runs the linux kernel version 3.10.61+ and iptables version 1.4.20.
bird333 said:
Yes, but it runs the linux kernel version 3.10.61+ and iptables version 1.4.20.
Click to expand...
Click to collapse
Amazon provides kernel source. If there is a module that is missing, you'll have to compile it yourself.
rbox said:
Amazon provides kernel source. If there is a module that is missing, you'll have to compile it yourself.
Click to expand...
Click to collapse
I'm afraid that is beyond my skillset. Does FTV2 have 'modprobe'?
bird333 said:
I'm afraid that is beyond my skillset. Does FTV2 have 'modprobe'?
Click to expand...
Click to collapse
It has insmod.
Hi I have working on this some time and it should work, I'm not a real developer and don't have big knowledge. This is ported from Wileyfox porridge.
I'm posting this here because I don't have a PC to try to build on it (I have single core celeron with 512mb RAM, belive me or not) and also my phone's bootloader is still locked because I don't want to break warranty yet because I had some problems with very low R/W speeds. So if there is anyone who know what should be done and would like to try to build ROM or help with device tree, please feel free to do that.
NOTICE: If you have model other then 8GB K350nds you should edit values of partition sizes in BoardConfig.mk Better solution will be if I known difference in size of partitions for each model, and even than I'm not sure what attribute from /proc/cmdline I should compare to get it right (in init_mm1v.cpp)
Device tree https://github.com/ProfessorWoland/android_device_lge_mm1v
You'll also need common tree https://github.com/LineageOS/android_device_cyanogen_mt6735-common
About kernel if you try to build ROM:
Kernel source is published by LG here http://opensource.lge.com/osSch/list?types=ALL&search=k350
But also there is kernel on Lineage OS repo https://github.com/LineageOS/android_kernel_cyanogen_mt6735
It should work also if you just add muse6735_m1v_m_defconfig file from your kenel source to /arch/arm/configs . Or at last i think that is our _defconfig because it's only one with anything which can be related to our device (m1v)
I bought this phone cheap so I'm going to try to compile today
joeeboogz said:
I bought this phone cheap so I'm going to try to compile today
Click to expand...
Click to collapse
Nice, but I doubt it will work at first try since I made this without any real knoweledge..
And there is still problem where we can't flash anything without soft brick because of some signature or whatever else checker. Probably in lk (little kernel) partition so we need a good reverse engineer to make check function allways true and don't kill phone in process..
joeeboogz said:
I bought this phone cheap so I'm going to try to compile today
Click to expand...
Click to collapse
Any success?
Professor Woland said:
Nice, but I doubt it will work at first try since I made this without any real knoweledge..
And there is still problem where we can't flash anything without soft brick because of some signature or whatever else checker. Probably in lk (little kernel) partition so we need a good reverse engineer to make check function allways true and don't kill phone in process..
Click to expand...
Click to collapse
Sent from my LGE LG-K350 using XDA Labs
bynamnshan said:
Sent from my LGE LG-K350 using XDA Labs
Click to expand...
Click to collapse
You wanna say something?
Does it works?
Santiago Pucheta said:
Does it works?
Click to expand...
Click to collapse
Not in a useful way, it compiles ROM but we don't have a way to test it, however even if we do I think it wouldn't work since even from kernel sources from LGE it can't compile working kernel idk why, since kernel doesn't have anything to do with tree, I tested it via 'fastboot boot ___' command.