I searched in every settings possible, but i can't disable the animation effect when i launch any application.
In the menu " display / animation control" i put everythink to OFF.
Where else should i check ?
I use Vanir ROM 4.4.2
Thank you
What version are you running? I'm on the 2/4 build and disable animations is working for me. Has for all previous builds as well. I'd backup your current setup, then clean flash the ROM to see if the problem persists.
Sent from my Galaxy Nexus using xda app-developers app
D1BB said:
What version are you running? I'm on the 2/4 build and disable animations is working for me. Has for all previous builds as well. I'd backup your current setup, then clean flash the ROM to see if the problem persists.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I' m running Vanir 4.4.2 020414
You mean, i should clean flash the ROM ? That means, i will have to do all the customizations / installing all the apps / again, after flahing the ROM ??
How did you disabled all the animations ?
From "display / animation control" ?
Yes, disabled them same as you. If you made a backup of your current setup, you could clean flash to see if /data is the problem, then if problem persists just restore your backup. I'm currently running dirtyV kernel, but stock never gave me any issues such as yours.
Sent from my Galaxy Nexus using xda app-developers app
D1BB said:
Yes, disabled them same as you. If you made a backup of your current setup, you could clean flash to see if /data is the problem, then if problem persists just restore your backup. I'm currently running dirtyV kernel, but stock never gave me any issues such as yours.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I use Fancy kernel
Related
Hello. So I tried to install a Franco kernel and it didn´t go well. Now my GNex won´t boot-up. It have happaned before with franco kernel. Then I reinstalled ROM and had to wipe all data. So my question: is there any way to get my device to bootup without reseting. Fortunately I have made Titanium backup so everything isn´t lost.
What ROM and which Kernel version?
Sent from my Galaxy Nexus using xda app-developers app
wisefreakz said:
What ROM and which Kernel version?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Its a AOKP rom and I don´t know the exact kernel because I downloaded it with the franco.kernel app. The app said it´s the latest and stable version. ( I have tried to install different kernels with Nexus Root Toolkit.)
Be aware that 4.2.2 kernels are not compatible with 4.2.1 or lower ROMs.
The latest franco APP 8.8.4 will install a 4.2.2 kernel.
If you did that, you have to re flash other compatible kernel .
Sent from my Galaxy Nexus using xda app-developers app
there should be a boot.img inside the zip file for the rom you are on. pull that and flash it in fastboot.
I have the AT&T S3 running an 4.2.2 aosp custom rom "jellybam" and i really want to overclock but in the Performance Control it only lets me go to 1512MHz. Can some1 plz help me overclock it but still keep my rom.
Flash this kernel
http://forum.xda-developers.com/showthread.php?p=28399829
It's kernel related. You have to find kernel that support higher overclock.
Sent from my GT-I9300 using xda app-developers app
There is various kernels in the Original development thread that support overclock.
Make sure yo read the OP and figure out which is best for you and your phone.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So i downloaded the file on my s3 booted into recovery and flashed it then i got stuck in a boot loop. I restored my phone but now what did i flash it wrong?
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
So i downloaded the file on my s3 booted into recovery and flashed it then i got stuck in a boot loop. I restored my phone but now what did i flash it wrong?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Could be a few issues.
You could be on an old version of JellyBam that does not use the 3.4 kernel. You also could have downloaded the wrong kernel from the page linked. If you could give us your ROM version that would help.
Its 7.5.0
But do u have to flash a kernel with odin
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
Its 7.5.0
But do u have to flash a kernel with odin
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Kernels are flashed in recovery, not Odin. The problem may be the recent display changes in KT's kernel. You may want to check his thread for an earlier build (pre 4/19) before the display commits were added.
CamFlawless said:
Kernels are flashed in recovery, not Odin. The problem may be the recent display changes in KT's kernel. You may want to check his thread for an earlier build (pre 4/19) before the display commits were added.
Click to expand...
Click to collapse
correct. flash his 4/11 release.
and if you ever find yourself in a bootloop from flashing the wrong kernel, just flash the correct kernel in recovery. wipe cache/dalvik, fix permissions and reboot. good to go without having to restore or reset anything.
also, i'd stick with ROMs in this forum that are supported by the dev.
Closing this one...as OP has posted duplicate thread here...http://forum.xda-developers.com/showthread.php?t=2246321
So i have decided to try some roms. I started with alliance rom. Downloaded rom customiser selected wipe options and the phone just stucks in samsung logo. Also tried to flash straight from philz but nothing changed. Tried zoot script, nothing changed, stucked to samsung logo for ever. I have restored with dmc3 and flashed philz recovery again and the su apps. So i continue with another rom. I have downloaded paranoid android rom put it on sd, factory reseted then tried to install paranoid. It tried to install when it throwed a set_perm some files changed status 7 error. I am very confused, it seems that my phone has a mechanism that it does not allow me to flash any rom!!! Please help!!!!
pantapanta1 said:
So i have decided to try some roms. I started with alliance rom. Downloaded rom customiser selected wipe options and the phone just stucks in samsung logo. Also tried to flash straight from philz but nothing changed. Tried zoot script, nothing changed, stucked to samsung logo for ever. I have restored with dmc3 and flashed philz recovery again and the su apps. So i continue with another rom. I have downloaded paranoid android rom put it on sd, factory reseted then tried to install paranoid. It tried to install when it throwed a set_perm some files changed status 7 error. I am very confused, it seems that my phone has a mechanism that it does not allow me to flash any rom!!! Please help!!!!
Click to expand...
Click to collapse
You should flash cm10 kernel before flash any cm10 base rom.
Good luck.
Sent from my GT-N7100 using xda premium
What about alliance rom?
refresh the phone
Use odin flash a stock rom. Then fladh recovery them rom of choice.
shakeyfingers said:
Use odin flash a stock rom. Then fladh recovery them rom of choice.
Click to expand...
Click to collapse
Yes thats what am doing
pantapanta1 said:
Yes thats what am doing
Click to expand...
Click to collapse
Hi, what's your status? If you still facing the same issue you could using the old recovery (chenglu) to flash your desire rom,.
Sent from my Nexus 7 using xda premium
lee yun khong said:
Hi, what's your status? If you still facing the same issue you could using the old recovery (chenglu) to flash your desire rom,.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Hi, currently stock with dmc3 as i was not able to flash pa or alliance. I have changed the recovery to cwm 6 but is throwing a similar error saying: getprop( ro.product.device ) = something like this.
Any help appreciated.
pantapanta1 said:
Hi, currently stock with dmc3 as i was not able to flash pa or alliance. I have changed the recovery to cwm 6 but is throwing a similar error saying: getprop( ro.product.device ) = something like this.
Any help appreciated.
Click to expand...
Click to collapse
Do you flash cm10 kernel before flash any cm10 base ROM?
Sent from my Nexus 7 using xda premium
lee yun khong said:
Do you flash cm10 kernel before flash any cm10 base ROM?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I flashed the N.E.A.K kernel while i was in cwm and right after i have tried to installed but it failed. But that was the only cm10 kernel i found.
Maybe can try devil - 3.0.83 kernel.
Sent from my Nexus 7 using xda premium
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
http://forum.xda-developers.com/showthread.php?t=2239453
Sent from my Nexus 7 using xda premium
lee yun khong said:
Maybe can try devil - 3.0.83 kernel.
Sent from my Nexus 7 using xda premium
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
http://forum.xda-developers.com/showthread.php?t=2239453
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
So i have to install devil kernel via cwm,while am on stock rom, let the phone reboot and then try to install pa?
pantapanta1 said:
So i have to install devil kernel via cwm,while am on stock rom, let the phone reboot and then try to install pa?
Click to expand...
Click to collapse
Go recovery- flash cm10 kernel reboot recovery-flash cm rom-flash gapps- reboot phone-done.
Sent from my Nexus 7 using xda premium
lee yun khong said:
Go recovery- flash cm10 kernel reboot recovery-flash cm rom-flash gapps- reboot phone-done.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
This thing is not happening!!!! grrrr! So i tried to install the Devil-n7100-DUAL-0.23.1_20130626.zip and am stuck with the SAMSUNG screen again!!!!!!
pantapanta1 said:
This thing is not happening!!!! grrrr! So i tried to install the Devil-n7100-DUAL-0.23.1_20130626.zip and am stuck with the SAMSUNG screen again!!!!!!
Click to expand...
Click to collapse
Sure you will stuck at screen logo since you has flashed cm10 kernel but still remain on Sammy based ROM. Flash Samsung kernel or any custom Sammy kernel such as persues or redphill to boot up the phone.
Sent from my Nexus 7 using xda premium
lee yun khong said:
Sure you will stuck at screen logo since you has flashed cm10 kernel but still remain on Sammy based ROM. Flash Samsung kernel or any custom Sammy kernel such as persues or redphill to boot up the phone.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
But how am gonna install paranoid android if i dont have a cm10 kernel flashed?
Do you try chenglu recovery?
Sent from my GT-N7100 using xda premium
lee yun khong said:
Do you try chenglu recovery?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yes that's what am using
I see...then u hv no choice but stick with samsung stock rom. Isn't the bad choice if you stick with samsung stock rom since it give you more superior in terms of battery life...beutiful and useful widget...useful spen festures . My personal opinion, pure vanila rom or any other aokp just for the devices less of power or lower spec. Note2 having good hardware spec which is give you buttery smooth and good responsive performance on par with cm10 based rom even loaded with sammy stock rom. A lot of mods, themes and simplistic control and xposed also provide huge customization feature on stock sammy rom. Cm 10,aokp and aosp is very good base rom as well but just too boring for myself.
Sent from my GT-N7100 using xda premium
lee yun khong said:
I see...then u hv no choice but stick with samsung stock rom. Isn't the bad choice if you stick with samsung stock rom since it give you more superior in terms of battery life...beutiful and useful widget...useful spen festures . My personal opinion, pure vanila rom or any other aokp just for the devices less of power or lower spec. Note2 having good hardware spec which is give you buttery smooth and good responsive performance on par with cm10 based rom even loaded with sammy stock rom. A lot of mods, themes and simplistic control and xposed also provide huge customization feature on stock sammy rom. Cm 10,aokp and aosp is very good base rom as well but just too boring for myself.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yes but am a rom testing guy....and i want to know why this is happening...Thanks for your help anyway! ;p
Hmm....just some opinion....perform super wipe and flash stock rom thru pc odin. Then, root it again and try again.
Im not sure the above method able to solve your problem or not, but you camn try, since im not familiar in edit script, therefore this is the most basic and long step method I will recommend for.
Sent from my GT-N7100 using xda premium
This will make your rooted Galaxy S4 volume level much high or slightly high user preference.
Step 1. Download the file and extract it.
Step 2. Pick which you want there 3 zip files, Loud, Slightly and Normal.
Step 3. Put it on your sdcard or on phone and boot your device in recovery with clockwork or any other recovery.
Step 4. Install and enjoy.
I tested 100x times Work Good.
Only been tested in stock rom.
Let me know how it's working for you.
Credit goes to : sbreen94
for these files (snd_soc_msm_2x_Fusion3_auxpcm and snd_soc_msm_2x_Fusion3)
All I did was extracted those files from hyperdrive rom and make a updater-script to install it on recovery.
I flashed loud and it caused my phone to continuously freeze. When opening play music, everything would freeze. Had to reflash ROM, wipe cache and fix permissions and I'm good again.
I also accidently thanked. Definitely not on purpose.
Sent from my GS4 using xda app-developers app
DevinQuigley said:
I flashed loud and it caused my phone to continuously freeze. When opening play music, everything would freeze. Had to reflash ROM, wipe cache and fix permissions and I'm good again.
I also accidently thanked. Definitely not on purpose.
Sent from my GS4 using xda app-developers app
Click to expand...
Click to collapse
Please explain what rom where you using? when you flash the loud mod.
I only tested on Stock Rom. and work perfectly.
Has anyone figured out if this works on aosp roms? If I don't get a response by the time my backup finishes then I will just try it myself.
That's probably the best way to see if it works for you. Post your results so the Dev knows what happened.
I just installed the loud zip and it made a huge difference. So far so good, I'm running the Infamous Rom.
Any one tried this on cm KitKat?
Edit: I just tried to flash this thru recovery and it doesn't seem to work on CM/KitKat/aosp base roms. The installation kept aborting.
Sent from my SGH-M919 using XDA Premium 4 mobile app
makavelicruz said:
Any one tried this on cm KitKat?
Edit: I just tried to flash this thru recovery and it doesn't seem to work on CM/KitKat/aosp base roms. The installation kept aborting.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2293133
this works fine but the issue I had is I lose the "Ok Google" when I say it doesn't respond I like that feature but check it out if your willing sacrifice the listen command
Would this work on 4.3
Sent from my SGH-M919 using Tapatalk 2
rg75 said:
Would this work on 4.3
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
+1
Sent from my SGH-M919 using XDA Premium 4 mobile app
I will try...
Any news if it will work on 4.3?..
??
egren58 said:
Any news if it will work on 4.3?..
??
Click to expand...
Click to collapse
Works on my sph 720 on 4.3
works on i9506
madtork said:
Works on my sph 720 on 4.3
Click to expand...
Click to collapse
Hi, this mod work on Galaxy S4 i9506??
i have been searching for kernels,mod,etc... and there isnt anything...
Works on 4.4.2?
Sent from my SGH-M919 using xda app-developers app
Just how much louder does it make it? And will it work with X louder module and CM's DSP manager?
Going to try it on CM11 Android 4.4.4
It works!!!
Thank you!
Smrkulja said:
It works!!!
Thank you!
Click to expand...
Click to collapse
What ROM are you on?
DSDONE said:
What ROM are you on?
Click to expand...
Click to collapse
Stock T-Mobile 4.4.2
I'm so confused!!!
As the title says, for ALL the roms I install, they all crash (launcher, setting, google search crashes).
What the heck is wrong with it?
I tried Carbon Rom, PA, AOKP, C-Rom, and they all crash!
I factory resetted it multiple times but doesnt work..
The Android Version before was 4.3, but I'm installing 4.4.4 ROMs.
Do I have to update my phone to 4.4.4 for it to work properly?
Or the build version doesn't matter?
Could it be that I'm using an incompatible kernel?
What is wrong with my phone?
I even went to Settings - Apps- Launcher and force stopped & clear data.
How do I fix it??? Thanks!
Did the 4.3 ROM work? Have you tried the stock ROM?
Sent from my Galaxy Nexus using XDA Free mobile app
mrgnex said:
Did the 4.3 ROM work? Have you tried the stock ROM?
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
I installed CM Remix rom, which is also 4.4.4 rom, but it works perfectly fine and has not crashed once. What do you think the problem is? For other roms, I downloaded the right Gapps, used stock kernel..
I noticed that everything crashes when I download multiple apps from the playstore..