Develop Bugs

[Q] Got my phone, latin america rom. Should I dump it? maybe different radio?

Hi, I just got my phone yesterday.
I see that latin american rom is not available on the site. Just a backup is ok? or should I take special consideration to dump it before putting other roms?
I want to be sure both that I can go back and that I can get the required info to contribute the rom here.
thanks!

What Android version does it come with?

System Version
Blur_Version.6.14.7.MB525.Personal.en.AR
Firmware Version
2.1-Update1
Build number

System version: Blur_Version6.14.7.MB525.Personal.en.AR
Firmware version: 2.1-update1
Number version: JORLA_U3_6.14.7
Another question, is any ROM in the forums posted in spanish?
Cuz i'd like to change mi stock ROM.
I'm from Argentina, so thats the reason for my lame english.

The Central Europe one has Spanish.
http://and-developers.com/sbf:defy
But if it's anything like Portuguese it's pretty broken, half the GUI is in english and the other half is in pt, plus it doesn't support special characters, so no ~´ç

Hocevar said:
The Central Europe one has Spanish.
and-developers.com/sbf:defy
But if it's anything like Portuguese it's pretty broken, half the GUI is in english and the other half is in pt, plus it doesn't support special characters, so no ~´ç
Click to expand...
Click to collapse
Thanks Hocevar, but i don't know. I don't wanna flash my phone, just wanna try Recovery. Or should I use RSDLite first and then try Recovery?.
If i can use Recovery without using RSDLite, what ROM do you recomend?.

Problems updating to 4.0 and changing CSC

I need help updating to android 4.0. I have been going trough pages and reading, but there is simply too much stuff that i cant understand. Here is the situation: I can't update to android 4.0 through kies. What i need to do?
Model number: GT.i9100
Android version: 2.3.4
Baseband version: I9100XXKG1
Kernel version: 2.6.35.7-i9100XXKG1-CL349526 [email protected] #2
Build number: Gingerbread.XXKG1
I have rooted my phone earlier, installed custom ROM, and then installed android 2.3.4 stock firmware. Information above tells everything about my SGS2. I can't find android 4.0 firmware download links, or instructions how to even do it. I have odin, and before i rooted my phone i took this information up what my phone used to be
baseband 19100xxki4
kernel i9100xwki8
To be hones, i don't know what those even mean. I only know that now they are different, and because my CSC is wrong i cant update with kies. I installed application called CSC select and it says my CSC is KOR. I also read that it needed to be NEE(nordic countries), to be able to update with kies. How ever CSC select application doesn't have a NEE available...
I am pretty clueless what i needed to do now, would really apperciate if someone could give me some advice. I dont need my android 4.0 to be rooted.

In the same boat
Riikka said:
Model number: GT.i9100
Android version: 2.3.4
Baseband version: I9100XXKG1
Kernel version: 2.6.35.7-i9100XXKG1-CL349526 [email protected] #2
Build number: Gingerbread.XXKG1
Click to expand...
Click to collapse
Hi, I am much in the same position as you. I am still trying to figure out my options, and will post back if I get anywhere. In the meantime, can you please post CSC etc details of your phone? You can get this by opening the dialer, and dialling
Code:
*#1234#
This is what I get; can you confirm if you have the same thing?
Code:
PDA : I9100XXKG1
PHONE : I9100XXKG1
CSC : I9100[B]O[/B]XAKG1
Build Info: Tue Jul 5 23:11:24 KST 2011
(Note that the bold letter in CSC is an uppercase letter "o", NOT numeral "0").
Do you have any idea if your phone is region-locked, region-free, unlocked, factory unlocked etc? Bought in India?
Cheers,

prshah said:
Hi, I am much in the same position as you. I am still trying to figure out my options, and will post back if I get anywhere. In the meantime, can you please post CSC etc details of your phone? You can get this by opening the dialer, and dialling
Code:
*#1234#
This is what I get; can you confirm if you have the same thing?
Code:
PDA : I9100XXKG1
PHONE : I9100XXKG1
CSC : I9100[B]O[/B]XAKG1
Build Info: Tue Jul 5 23:11:24 KST 2011
(Note that the bold letter in CSC is an uppercase letter "o", NOT numeral "0").
Do you have any idea if your phone is region-locked, region-free, unlocked, factory unlocked etc? Bought in India?
Cheers,
Click to expand...
Click to collapse
I have to same problem
I order my phone on ebay from china made in Korea

[Q] Please Help a Noob out

Hi,
I attempted to put a stock rom back on the phone and then re-root.
I found a link for the stock rom whick matched my Build number and using ODIN it successfully installed.
Main issue I had previous was that I could not load into the Android recovery screen which I now can do.
When the phone booted up I was very surprised to see a "Orange mobile" splash screen and also the addition of loads of Orange Apps? Which I've now disabled. Could be A French ROM?
How can I get a Stock rom without any Mobile operator Bloatware and get rid of that Splash screen?
I don't understand most of the details related to my model number but it appears they have changed slightly.
Here's the list;
Model no. GT-N7100
Android version 4.1.2
Baseband version N7100BVDMF2
Kernel version 3.031-107214 [email protected]#1
SMP PREEMPT Sat Jun1 12.22.20 KST 2013
Build number JZ054K.N7100XXDMF1
I have also downloaded the Samsung galaxy note2 toolkit but cannot find my model numbers as it's not shown within the ranges.
Build numbers available between DMA3 - DMC1. does that make a difference.
Any help or advice would be appreciated.
Thanks

If you want an unbranded stock Rom for your region, go to sammobile.com and grab the latest firmware for the n7100, region code united kingdom btu. The btu bit denotes its unbranded and for the UK.
-- Sent from the mighty Note 2 --

Latest Stock firmware
Gags111 said:
Hi,
I attempted to put a stock rom back on the phone and then re-root.
I found a link for the stock rom whick matched my Build number and using ODIN it successfully installed.
Main issue I had previous was that I could not load into the Android recovery screen which I now can do.
When the phone booted up I was very surprised to see a "Orange mobile" splash screen and also the addition of loads of Orange Apps? Which I've now disabled. Could be A French ROM?
How can I get a Stock rom without any Mobile operator Bloatware and get rid of that Splash screen?
I don't understand most of the details related to my model number but it appears they have changed slightly.
Here's the list;
Model no. GT-N7100
Android version 4.1.2
Baseband version N7100BVDMF2
Kernel version 3.031-107214 [email protected]#1
SMP PREEMPT Sat Jun1 12.22.20 KST 2013
Build number JZ054K.N7100XXDMF1
I have also downloaded the Samsung galaxy note2 toolkit but cannot find my model numbers as it's not shown within the ranges.
Build numbers available between DMA3 - DMC1. does that make a difference.
Any help or advice would be appreciated.
Thanks
Click to expand...
Click to collapse
Hello,
Orange is a french operator,here is a link for BTU(n7100XXDME6)[stock firmware]:http://hotfile.com/dl/229489883/6643261/BTU-N7100XXDME6-20130603102621.zip.html
Hope this help

Thanks
Thanks, I found it virtually straight away after creating my post last night.(as they say ,the informations out there, you just gotta know where to look!).I chose that one(French rom) on Sammobile as the build numbers where the same.! should of researched first
Thanks for the link.
I've just installed the stock ROM and all went well.
One issue or may not be is that when i go to About Device-Software update-check for updates and press nothin happens? Isn't it suppose to say Your device is already upto date?
Is there any links for a stable and most up to date version of Twrp recovery?
So Now i will try re-rooting again. I think I am going to try Twrp recovery after looking at a few forums.
Also I have seen people tap the Android version button(in About device) and the Jelly Bean wallpaper comes up but in my about device its all greyed out?
Anyway thanks again for the Help it was Greatly appreciated.

Thanks
dr.m0x said:
If you want an unbranded stock Rom for your region, go to sammobile.com and grab the latest firmware for the n7100, region code united kingdom btu. The btu bit denotes its unbranded and for the UK.
-- Sent from the mighty Note 2 --
Click to expand...
Click to collapse
Thanks very much. All up and running now, now its time to re-root

[Q] Help with Galaxy Note 2 N7100

Recently I bought a Galaxy Note 2 , and I installed the following firmware :
Model: GT-N7100
Country: Greece (Cosmote)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: COS
PDA: N7100XXDMB2
CSC: N7100COSDMA2
MODEM: N7100XXDLK7.
After Installing that firmware the phones IME number did change and there is no network signal at all ,gives an error message cannot register to network.
Does anyone have some ideas of how to change the IME number , as well as get signal back on the phone.
Any help really appreciated.
:good:

george120879 said:
Recently I bought a Galaxy Note 2 , and I installed the following firmware :
Model: GT-N7100
Country: Greece (Cosmote)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: COS
PDA: N7100XXDMB2
CSC: N7100COSDMA2
MODEM: N7100XXDLK7.
After Installing that firmware the phones IME number did change and there is no network signal at all ,gives an error message cannot register to network.
Does anyone have some ideas of how to change the IME number , as well as get signal back on the phone.
Any help really appreciated.
:good:
Click to expand...
Click to collapse
I've read this thread http://forum.xda-developers.com/showthread.php?t=2389426 looks like in order for you to fix that, is you need to have a back up of your efs. And I'm guessing you don't have one.
Try searching through google or here for a way to restore it without the back up. And you can try sending private msg. to experts like dr.ketan. Make sure to thank him if he helps you
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock

laziafbaito said:
I've read this thread http://forum.xda-developers.com/showthread.php?t=2389426 looks like in order for you to fix that, is you need to have a back up of your efs. And I'm guessing you don't have one.
Try searching through google or here for a way to restore it without the back up. And you can try sending private msg. to experts like dr.ketan. Make sure to thank him if he helps you
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock
Click to expand...
Click to collapse
Then the Question now gets Different
How to restore my IMEI on Galaxy note 2 if I don't have a backup of /efs?

george120879 said:
Then the Question now gets Different
How to restore my IMEI on Galaxy note 2 if I don't have a backup of /efs?
Click to expand...
Click to collapse
Yes, but next time instead of posting a new topic, just edit your OP.
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock

[Q] Asecend P6 / Honor3

I visit china and I bought a Huawei Honor 3. In the store they told me that the language settings were Chinese and English. What they showed me was also in English. Back home I discovered that the phone is English but Chinese English. So a lot of text is English but a lot of text is Chinese and I believe I have also some restrictions on the download of apps.
In the store they told me that this phone is the same as a Asecend P6 and if I boot the phone I get a Asecend message.
Details:
Model number: HN-U01
CPU: quad 1,5ghz
Android: 4.2.2
Emotion UI 1.6
baseband version:imc1202_penta
kernel version: 3.0.8-00829-g59c9c87 [email protected]#1
build number: HN3-u01v100r001chnc00b113
What is the best think to do? I want nothing special so is it possible to load a standard P6 rom on the phone suitable for Europe?
I hope there is a simple solution,
So thanks in advance for the help!

woedie said:
I visit china and I bought a Huawei Honor 3. In the store they told me that the language settings were Chinese and English. What they showed me was also in English. Back home I discovered that the phone is English but Chinese English. So a lot of text is English but a lot of text is Chinese and I believe I have also some restrictions on the download of apps.
In the store they told me that this phone is the same as a Asecend P6 and if I boot the phone I get a Asecend message.
Details:
Model number: HN-U01
CPU: quad 1,5ghz
Android: 4.2.2
Emotion UI 1.6
baseband version:imc1202_penta
kernel version: 3.0.8-00829-g59c9c87 [email protected]#1
build number: HN3-u01v100r001chnc00b113
What is the best think to do? I want nothing special so is it possible to load a standard P6 rom on the phone suitable for Europe?
I hope there is a simple solution,
So thanks in advance for the help!
Click to expand...
Click to collapse
ascend p6 and honor 3 are two completely different cell phones

problem solved
I solved my problem via the android SDK

The kernel and build number is different from P6.
From hardware point, besides the camera and battery, there is no difference. you should send query to Huawei officials.

That is not goog idea, probably you will brick your phone.

woedie said:
I solved my problem via the android SDK
Click to expand...
Click to collapse
What did you do. I just bought one, and while its all working fine, i was curious what options i haven't found a suitable rom.
Thanks Man

woedie said:
I solved my problem via the android SDK
Click to expand...
Click to collapse
What have done? Please just explain!!