[Q] HTC Desire HD upgrade to Jellybean gone wrong - Desire HD Q&A, Help & Troubleshooting

I've hit a brick wall on this and really need some help.
Last night I unlocked the bootloader on my HTC Desire HD.
I proceeded to the steps on Team Android page
Up to setp 10 everything was fine but when I went to RECOVERY, I just got a red exclamation.
ClockworkMod Recovery was not installed. I can't proceed with the JellyBean setup.
The phone cannot boot up as normal. I just get a blank screen. However, I can go into bootloader mode.
I tried a factory reset - no joy.
What should I do now? From hours of reading I've seen advice about flashing recovery and flashing rom. I don't have a recovery.img or a boot.img (other than the jellybean boot.img).
I don't want to mess this up any more. Would really appreciate any help I can get.
In Bootloader it says
****** UNLOCKED *******
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M

firstly you must download this TWRP recovery .img file..then turn on your phone into bootloader mode..then select FASTBOOT..then connecting your phone to pc until indicator in your phone is "FASTBOOT-USB" then copied the "openrecovery-twrp-2.6.3.0-ace.img" file to your adb folder..that are the same place as your adb.exe and fastboot.exe file on your pc...then open cmd from there..
and then typing "fastboot flash recovery openrecovery-twrp-2.6.3.0-ace.img" ..after that you can continued typing "fastboot reboot-bootloader" done...now you already had custom recovery on your phone..
now you can install/ flashing custom rom from the recovery but don't forget always flashing boot.img that are extracted from the rom.zip that you are installed through FASTBOOT..with typing "fastboot flash boot boot.img" then type.. "fastboot reboot"
done...
hope this help..

Related

[Q] Incredible boot loops at white screen, tried many things

I have an Incredible that has Cyanogenmod 7 on it. A couple weeks ago it stopped working in that it would just reboot after the white HTC incredible screen. I can get it to go to Hboot, but if I try to go into Recovery it just reboots immediately.
I flashed a new Hboot successfully, but once it reboots I get stuck in the loop again.
Both Clear Storage and Factory Reset start the boot loop as well.
Anyone have an idea of what I can do or does this sound like a hardware issue? My computer recognizes it, but I'm not sure what good that does me since I can't get it to boot or go into Recovery.
Here's the info from Hboot in case it's helps
Code:
INCREDIBLEC XC SHIP S-OFF
HBOOT-0.92.0000
MICROP-0417
TOUCH PANEL-ATMEL24_16ab
RADIO-2.15.00.07.28
Jul 23 2010, 18:06:51
GreyhoundX said:
I have an Incredible that has Cyanogenmod 7 on it. A couple weeks ago it stopped working in that it would just reboot after the white HTC incredible screen. I can get it to go to Hboot, but if I try to go into Recovery it just reboots immediately.
I flashed a new Hboot successfully, but once it reboots I get stuck in the loop again.
Both Clear Storage and Factory Reset start the boot loop as well.
Anyone have an idea of what I can do or does this sound like a hardware issue? My computer recognizes it, but I'm not sure what good that does me since I can't get it to boot or go into Recovery.
Here's the info from Hboot in case it's helps
Code:
INCREDIBLEC XC SHIP S-OFF
HBOOT-0.92.0000
MICROP-0417
TOUCH PANEL-ATMEL24_16ab
RADIO-2.15.00.07.28
Jul 23 2010, 18:06:51
Click to expand...
Click to collapse
I would flash an ruu thru hboot and then do a factory rest from hboot. Then if it boots fine flash cwm recovery thru hboot and then the su binaty thru recovery to regain root. Once you have recovery working again then flash back to cm7 or another rom of your choice thru recovery.
Or you could try to just reflash cwm recovery thru hboot, and then if you can access recovery wipe everything in mounts and storage except sdcard and emmc, and then restore a nandroid or flash a new rom.
RUU's - http://pvillecomp.com/?page_id=22
Latest cwm recovery - http://dinc.does-it.net/Recoveries/CWM_5.0.2.0/PB31IMG.zip
Latest su binary - http://dinc.does-it.net/SuperUser/SuperUser_3.0.7.zip
How to flash with hboot - http://pvillecomp.com/?page_id=79
You may also want to upgrade to the newest radio 2.15.10.07.07 - http://pvillecomp.com/?page_id=18
I flashed the PB31IMG from here (wasn't the newest): http://pvillecomp.com/?page_id=22
The flash seemed to work, but once it rebooted it went into the loop again. All the options in Hboot just throw it into the same white-screen loop, including Factory Reset and Recovery.
The only thing I see different in Hboot is my radio is now 2.15.10.07.07
GreyhoundX said:
I flashed the PB31IMG from here (wasn't the newest): http://pvillecomp.com/?page_id=22
The flash seemed to work, but once it rebooted it went into the loop again. All the options in Hboot just throw it into the same white-screen loop, including Factory Reset and Recovery.
The only thing I see different in Hboot is my radio is now 2.15.10.07.07
Click to expand...
Click to collapse
Try flashing the recovery and then see if you can access it.
If you have adb setup and have fastboot, you can try to erase the recovery partition by typing " fastboot erase recovery " without quotes into a cmd prompt on your pc. And then flash the recovery from above. Sounds like something is either messed up with your boot or recovery partition or img.
You can also try to use fastboot to erase the boot partition " fastboot erase boot " and then try an ruu again.
I tried both Clockwork 5 and Stock HTC from here: http://pvillecomp.com/?page_id=28
They both boot-looped after flashing.
When I try to go into Recovery now, I get the white screen then a quick flash of a phone image with a red triangle on top.
GreyhoundX said:
I tried both Clockwork 5 and Stock HTC from here: http://pvillecomp.com/?page_id=28
They both boot-looped after flashing.
When I try to go into Recovery now, I get the white screen then a quick flash of a phone image with a red triangle on top.
Click to expand...
Click to collapse
That red triangle is the stock recovery, try to do a factory reset now or try the sugestions i added to the post above.
Factory reset doesn't work. It shows me a phone with a green circle then goes into the boot loop.
I'll try the ADB stuff later today when I'm back from work. I've never used it before. Thanks so much for helping.
How do I connect to the phone via ADB when it's in Hboot? I just get "error: device not found" Every tutorial I found requires the phone to be booted to use ADB.
GreyhoundX said:
How do I connect to the phone via ADB when it's in Hboot? I just get "error: device not found" Every tutorial I found requires the phone to be booted to use ADB.
Click to expand...
Click to collapse
Adb will not work in hboot but fastboot will. You can use adb in recovery though, not just booted to the os. The error device not found is probably because you were trying adb from hboot, or because you dont have the correct drivers on your pc. Adb and fastboot are 2 different programs, fastboot is not an adb command. If you need the fastboot.exe file or the drivers you can get them here. http://dinc.does-it.net/ADB/ADB-Fastboot-USB-Drivers_v4_(x86)(x64).zip
I ran "fastboot erase boot" and it said "erasing 'boot'...FAILED (remote: not allowed)". Can I try running or flashing something else?
If I run "fastboot devices" it shows my device ID with fastboot next to it so I know it's connecting.
Thanks for putting up with this, can't imagine what caused this.
Hmm not sure, seems it may be some sort of hardware issue or disk failure. If you cant get it to boot after an ruu, and you cant factory reset or access a custom recovery or get fastboot to erase or flash, im not sure what else you could do. My only other sugestion would be to try the ruu.exe that you do from your pc with the phone connected. Flash the stock recovery PB31IMG.zip first before doing so as i believe its required for the ruu.exe. It may work and it may not im not exactly sure how the ruu.exe works as i have never used one, but i believe you just boot into hboot and then run the exe on your pc.
I haven't flashed through Fastboot because I don't know how. I tried flashing a few of the stock images, but I get errors everytime like "whoops: didn't find expected signature" or "archive does not contain android-info.txt".
Is there something I'm doing wrong?
GreyhoundX said:
I haven't flashed through Fastboot because I don't know how. I tried flashing a few of the stock images, but I get errors everytime like "whoops: didn't find expected signature" or "archive does not contain android-info.txt".
Is there something I'm doing wrong?
Click to expand...
Click to collapse
Take a PB31IMG.zip ruu ( http://pvillecomp.com/?page_id=22 ) and rename it update.zip
Put the update.zip file on your pc in the same folder as the fastboot.exe file. (Where adb is installed)
Boot into hboot with the phone pluged in to the pc. Make sure it says fastboot in red at the top of the hboot screen.
Open a cmd prompt to the directory where fastboot.exe is (eg C:\ADB\)
Type without quotes " fastboot update update.zip " and hit enter.
Here is some good info on fastboot.
http://wiki.cyanogenmod.com/wiki/Fastboot
Should I be able to open the zip on my computer? All the ones I download from that site are invalid according to Windows. This is the one I tried (3rd link on that page): http://pvillecomp.com/wp/wp-content/uploads/Images/Gingerbread-Stock_PB31IMG.zip
I did exactly what you said and got a similar result to before.
Code:
C:\adb>fastboot update update.zip
Whoops: didn't find expected signature
read_central_directory_entry failed
error: failed to access zipdata in 'ö╓°ÑAa.òo♥Gûl╔←☺☼‼6«T▀ésαu*z¿♥M╦▌‼A←4,<Lσ╡≥↕ ªº─ ΦSÉ╢t↕←Θ■√╣F'
GreyhoundX said:
Should I be able to open the zip on my computer? All the ones I download from that site are invalid according to Windows. This is the one I tried (3rd link on that page): http://pvillecomp.com/wp/wp-content/uploads/Images/Gingerbread-Stock_PB31IMG.zip
I did exactly what you said and got a similar result to before.
Code:
C:\adb>fastboot update update.zip
Whoops: didn't find expected signature
read_central_directory_entry failed
error: failed to access zipdata in 'ö╓°ÑAa.òo♥Gûl╔←☺☼‼6«T▀ésαu*z¿♥M╦▌‼A←4,<Lσ╡≥↕ ªº─ ΦSÉ╢t↕←Θ■√╣F'
Click to expand...
Click to collapse
Use 7-zip, winzip and winrar dont work the best for android files.
Think I'm just going to give up on this one since the flashing doesn't work...what a hassle. I wish there was some diagnostics tool that would just tell me if the phone is physically broken.

[Q] Help! Can't go into recovery mode with Desire Z hboot‏ (G2)

I have a Tmobile G2 rooted running Gingervillian (gingerbread 2.3.1) and I tried to install the Desire z hboot to get the Sense ui.
I followed the steps here, "http://www.youtube.com/watch?v=ogZfSWLlvPg"
HERES THE PROCEDURE OF WHAT I DID:
After updating the PC10IMG.zip (Desire Z hboot) folder to the root of my G2, I was stuck on the HTC logo screen after updating. So I followed what the guy said in the video, deleted the PC10IMG file in my SD card then rebooted my phone.
After rebooting my phone, I was booted back same rom. So I flash/recovery my phone through Rom Manager and tried rebooting my phone to clockwork mod recovery mode.
After rebooting, I didn't go to Clockwork Mod but to FASTBOOT screen? I select "bootloader" and it goes to a quick load that says something like "SD loading, no image or wrong image". I select "Recovery" then it goes to the HTC logo for a split second then I'm back to FASTBOOT screen again.
This is the info on the fasboot screen? don't know if that'll help:
Vision pvt eng S-off
Hboot-0.84.2000 (pc1010000)
Microp-0425
Radio-26.02.15_m2
eMMC-boot
Sep 8 2010, 15:65:38
So now, I don't know what to do and my questions are:
1.) Is there a way to go back to the G2 hboot?
2. Can I still fix this and procedure on and install new roms on recovery clockwork mode, using Desire Z hboot? (as the video did)
Please help a brother out I'm still a noob and still learning. If this is in the wrong place, please move it to the correct place.
Anyone? if it seems confusing, please ask questions or if I need to provide more information. I really need help with this. Any suggestions will help.
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
tarroyo said:
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
Click to expand...
Click to collapse
would any PP99IMG.zip file work? And do I basically put it in the SD's root and put it into the boot menu to update the file?
Thanks
by the way, is this compatible with G2s?
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
hoffmas said:
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
Click to expand...
Click to collapse
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
prototype2 said:
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
Click to expand...
Click to collapse
Yes, you can run adb on a Mac. See the link to my adb guide in my signature (assuming you're not viewing from the XDA app, which doesn't show the full sig).
Sent from my Desire Z running CM7.
Okay, just to make it clear (I am a "step by step" guy when it comes to technical computer/phone stuff.), from my understanding:
1. Download the recovery.img (3.0.2.4 for vision) and put it in the root of my SD card.
2. Delete any pc10img.zip files from SD card.
3. Turn phone off and then turn phone onto FASTBOOT mode by holding power/volume down/camera or power and tp-wake? (Btw what's tp-wake? and during this process, is the phone in fastboot screen mode while I'm about to type the "flashboot flash recovery recovery.img"?
4. Connect to computer, open up terminal (Mac) and do the ADB process and type in "fastboot flash recovery recovery.img"
5. Wipe clean and install new rom in recovery mode? (Clockwork Mod recovery mode?)
PLEASE correct my steps or add in any steps that I'm missing. I bought my phone rooted so I never went through these steps before. Anyways please correct me, I don't want to ruin my phone anymore than it is already.
anyone can review my steps?
good morning
ad step 1: don´t put it onto your sd; put it into the adb tool folder on your pc !
ad step 3: tp-wake = the square button at the bottom of your phone (the one that acts like a mouse); to enter fastboot mode press power & tp-wake
...the phone should be in fastboot mode while typing the command.
before you type "fastboot flash recovery recovery.img" type "fastboot devices" and look if your phone shows up... if so go ahead with flashig the recovery (by the way, you may have to rename the recovery file)
step 4 and 5 look fine...
good luck
okay, I will try it in a little bit here.
In FASTBOOT USB mode, it wont recognize my device but when my device is fully on, adb works.
I get when I type "flashboot devices" (while the phone is on FASTBOOT) in terminal and get:
"-bash: fastboot: command not found"
By the way, I renamed the downloaded flash to "recovery.img" and put that file in the "platform-tools". Don't know if that'll work.
The "fastboot" command should be on your PC in the same folder as the "adb" command. Where did you get adb from, did you install the SDK and platform tools, or something cut-down ?
Sent from my Desire Z running CM7.
hm... that means that you do not have fastboot installed. maybe google for fastboot on mac, because i have a linux system... so i can´t help you in that point.
other thing you could do is following this guide (it´s a pc10img.zip with dz hboot and clockwork recovery):
http://www.virtuousrom.com/2011/06/t-mobile-g2-users-migrating-to-desirez.html
but first i would try the fastboot method - it´s safer.
Okay, I got the fastboot devices to read my phone. But it cannot load my recovery.img?
This is what got when I typed in "fastboot flash recovery recovery.img" :
error: cannot load 'recovery.img'
rename it to recovery and try again...
It's not loading the img file for some reason..
prototype2 said:
It's not loading the img file for some reason..
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
hoffmas said:
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
Click to expand...
Click to collapse
that link isn't working

[Q] Fastboot not recognized?

Dear all,
After my phone was stuck in a bootloop i've been trying to reflash the recovery which i'm not able to access.
I have used revolutionary and have been using MIUI for a while, further details:
Bravo PVT1 SHIP S-OFF
HBOOT-6.93.1002
I'm trying to fix this on my moms pc and I notice there's some problems with the adb/fastboot since it gives me an error of a missing AdbWinApi.dll when trying to flash the recovery from android-sdk/tools.
However, the error does not appear when I run fastboot from \platform-tools. Could that be correct? If I do, the command box is waiting for the device and seems to be stuck there. when using the command adb devices, my desire is not listed.
What am I doing wrong here? Thnx!
and fastboot drivers installed?
download here
phone must be in fastboot (power+back button)
try: fastboot devices
fastboot flash recovery recovery.img
recovery.img= path/filename of your recovery
Can't access recovery after flash with fastboot
Awesome! thnx I had been installing drivers, but apparently the right one wasn't there.
Unfortunately, next problem... (is it ok to ask it here?) I've flashed the recovery, but the bootloop still exist. Is the S-on option of bortaks guide safe to try next? or are there other (better) alternatives?
edit: never mind! the ruu indeed worked pfieuw... thnx for the help!
glad to hear that, enjoy
i cant see my device with adb on linux.
last time i had flash the hboot from the phone!
i use kubuntu 12.04 with 3.4 kernel.
can you give me any help?
adb works in custom recovery/rom with debugging on, fastboot command in fastboot mode (power +back button to power on phone or reboot to bootloader from custom rom with APM)

[Q] HTC Desire Z Stuck on HTC Logo All ADB Command Not Working

Hi
Sorry for my english is bad.
Htc desire Z stuck on HTC Logo Please Help Me
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.03_M
eMMC-boot
Apr 11 2011,23:36.27
All Fasboot Command Working
C:\Android\android-sdk\platform-tools>fastboot devices
SH17DRT00916 fastboot
but all adb command Not Working
C:\Android\android-sdk\platform-tools>adb devices
List of devices attached
C:\Android\android-sdk\platform-tools>adb shell
error: device not found
I did my card Gold Card SD
PC10IMG.Zip downloaded from shipped-roms site was not installed
What else can I do?
yerin6 said:
Hi
Sorry for my english is bad.
Htc desire Z stuck on HTC Logo Please Help Me
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.03_M
eMMC-boot
Apr 11 2011,23:36.27
All Fasboot Command Working
C:\Android\android-sdk\platform-tools>fastboot devices
SH17DRT00916 fastboot
but all adb command Not Working
C:\Android\android-sdk\platform-tools>adb devices
List of devices attached
C:\Android\android-sdk\platform-tools>adb shell
error: device not found
I did my card Gold Card SD
PC10IMG.Zip downloaded from shipped-roms site was not installed
What else can I do?
Click to expand...
Click to collapse
I have pretty much the same phone. I've bought it in Austria. Once stopped workig... I can navigate in the bootloader menu, but anything I choose, it freezes. OK, it calculates CRC. No image files, just like my mem card also unreadable with PC. No flashes help. I've downloaded stock RUU. It communicates with the PC says fastboot usb, starts to flash and stops at reboot bootloader and never goes any further....
As your bootloader is S-ON you can't flash custom rom's, adb won't work until the device is past the bootloader and starting up the rom.
Not all sd-cards work properly in Gold mode (it isn't correctly made Golden if your pc wants you to format the sd-card), try another one or format your current one in FAT32 and put the latest PC10IMG.zip (Download one of the .zip files here: http://shipped-roms.com/index.php?category=android&model=Vision rename it to PC10IMG.zip, make sure you don't have extentions hidden in windows for the renaming to be accurate) in the root of it and start the device in the bootloader (holding power and volume down). Then it should flash the PC10IMG.zip as normal.
You can also try to boot into recovery mode and recover your rom from there (as your bootloader is S-ON chances are you've still got stock recovery).
Then, if you still want to, you can try and unlock the bootloader and root your phone.
If the above isn't working for you you can always try to unlock your bootloader via htc (you only need fastboot to work for this). Register at http://htcdev.com/bootloader/ and follow the unlock instructions. After that you should be able to flash a custom recovery like Clockwork mod (http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.1.0-vision.img) and install one of the many ROM's available in the android development section of the Desire Z formums.
You can also try and flash this PC10IMG.zip (http://files.virtuousrom.com/vision/misc/PC10IMG.zip) it contains the correct bootloader (S-OFF hboot), clockworkmod recovery and the latest T-Mobile radio (There's no ROM included in here, you can restart the device in recovery and install a custom ROM).
If this doesn't work, post your problems here, I'll take a look at them and try to help you to get further.

[Q] Stuck on bootscreen after flash - please help.

Hi.
I flashed Android Revolution HD 18.4 on to my phone and now it's just get stuck on bootscreen.
And I can't get to my sd card via computer when in fastboot.
If anyone have any suggestions on what I can do, please help me.
Thanks.
Enter the bootloader and go to recovery from there. Mount the sdcard as a diskdrive/mass storage device with the option witin the recovery !
What hboot do you have ?
What recovery do you have ?
thanks.
i mounted it now and flashed boot.img and then flashed the rom but now it's getting stucked on the htc-one-beatsaudio-screen.
any thoughts on what to do?
What recovery ?
What hboot number ?
hboot 1.12.0000
recovery CWM v6.0.2.7
To e able to run JB roms you need to update the hboot first !
in this thread - http://forum.xda-developers.com/showthread.php?t=1920060 - it says "IF YOU HAVE NO CID NUMBER LISTED ABOVE, STOP NOW!"
my cid is H3G_G04. should I go back to ics or is there a way for me to have jb?
(thanks very much for you help by the way)
You can check this thread
http://forum.xda-developers.com/showthread.php?t=1927048
i did these steps exept no. 5 cos' i don't have a unlock_code.bin file.
1) go into fastboot and enter "fastboot oem lock" - the device will reboot
2) go into fastboot again and enter "fastboot oem rebootRUU" - there will be a black screen with a silverish HTC logo
3) enter "fastboot flash zip firmware.zip" (you need the firmware.zip from page 1 for this)
3a) enter the same again, the green bar under the logo should go to 100% (either after the first or second time)
4) enter "fastboot reboot-bootloader" to go back to your fastboot
5) unlock your device again with the unlock code ("fastboot flash unlocktoken Unlock_code.bin")
6) Restore your old boot.img (fastboot flash boot name_of_boot_file.img) and recovery (fastboot flash recovery name_of_recovery_file.img), make sure you copied them from the nandroid backup folder we created earlier into the folder that contains the fastboot.exe you're using.
(7) Reboot and you should now have Hboot 1.39 with your old boot and recovery.
now i have hboot 1.39 but... now when i go in to recovery it isn't cwm anymore. it's just a logo of a phone with a red varning-sign over it. then i get in to som sort of android screen but when i unlock it the screen turns white with green htc logo. any thoughts?
You need to unlock the bootloader and flash a custom recovery
Go to the htcdev site and get a new unlock code.bin file
Now it's working, Thanks so very much man! You're awesome! =)
Thank you very much ! and good you got it solved ! :good:
CASE CLOSED !

Categories

Resources