Tempered Glass Questions - Nexus 5 Accessories

First things first is this legit? or some cheap knockoff of the real stuff!
http://www.ebay.com/itm/Premium-Rea...l_Phone_Screen_Protectors&hash=item5d48cb0407
second question when the glass is applied can it be ever taken off?
Sorry for the newb questions this is my first time applying a screen protector

markdapimp said:
First things first is this legit? or some cheap knockoff of the real stuff!
http://www.ebay.com/itm/Premium-Rea...l_Phone_Screen_Protectors&hash=item5d48cb0407
second question when the glass is applied can it be ever taken off?
Sorry for the newb questions this is my first time applying a screen protector
Click to expand...
Click to collapse
these are probably generic unbranded tempered glass protector. I bought a similar one from China during my most recent trip. Works just as intended and it's cheaper than branded ones.
If you ever decide to stop using it, you can just use your fingernail and lift it like any other normal film screen protector.

I'm also looking into these.I never had a glass protector but I feel $30-40 is a bit too much for my blood. maybe I should try these. and If I like the feel, later on invest on a better quality one.

NJ_RAMS_FAN said:
I'm also looking into these.I never had a glass protector but I feel $30-40 is a bit too much for my blood. maybe I should try these. and If I like the feel, later on invest on a better quality one.
Click to expand...
Click to collapse
Ordered one yesterday its shipping from the USA so must be fast because US to US ill let you know how it goes

markdapimp said:
Ordered one yesterday its shipping from the USA so must be fast because US to US ill let you know how it goes
Click to expand...
Click to collapse
haha. I might just order one just to try it.

NJ_RAMS_FAN said:
I'm also looking into these.I never had a glass protector but I feel $30-40 is a bit too much for my blood. maybe I should try these. and If I like the feel, later on invest on a better quality one.
Click to expand...
Click to collapse
How about this? IMO $16 is not bad for such highly rated product.

twistkill said:
How about this? IMO $16 is not bad for such highly rated product.
Click to expand...
Click to collapse
which one is $16?

Guys go with slim ones because i ordered Nilkin and it forms spider webs even i applied with so much care

NJ_RAMS_FAN said:
which one is $16?
Click to expand...
Click to collapse
Oops, It didn't let me post the link.
Search for "Anker Nexus 5 Tempered Glass" in Amazon.
---------- Post added at 10:36 PM ---------- Previous post was at 10:35 PM ----------
http://www.amazon.com/Scratch-Terminator-Tempered-Glass-Protector-Premium/dp/B00GTIH064

A yes. I saw that on amazon. Put it on my watch list.
Sent from my Nexus 5 using xda app-developers app

shadowdevil said:
Guys go with slim ones because i ordered Nilkin and it forms spider webs even i applied with so much care
Click to expand...
Click to collapse
Use binder clips to put on pressure to remove the spiderweb, worked for me on the most stubborn one.

http://forum.xda-developers.com/showthread.php?t=2521959
Nillkin LG Nexus 5 Anti-Explosion Tempered Glass Screen Protector
The Nillkin ones are only $10-12 through several vendors and people seem to be having good luck, in general.
Anker has a good name so far, so I suspect they have decent product a well
Posted from my SGS4G, thanks to Team Acid development

I ended up ordering one. So far it feels so smooth but I got tons of spider webs. Did you try yet?
Sent from my Nexus 5 using xda app-developers app
---------- Post added at 09:37 PM ---------- Previous post was at 09:33 PM ----------
Maybe that's why they are cheap.
Sent from my Nexus 5 using xda app-developers app

NJ_RAMS_FAN said:
I ended up ordering one. So far it feels so smooth but I got tons of spider webs. Did you try yet?
Sent from my Nexus 5 using xda app-developers app
---------- Post added at 09:37 PM ---------- Previous post was at 09:33 PM ----------
Maybe that's why they are cheap.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Got one and yes indeed its pretty smooth I had no spider webs for the first 3 days I even almost forgot I had it on until I saw this thread again
But yes indeed got 3 small spider webs near the bottom. Pressing them and reapplying won't make em go away but who cares long as its not on the screen I'm fine with that.
Sent from my Nexus 5 using Tapatalk

yea, the screen part if fine but it's annoying to see the webs. ... I'll keep it on until it gets worse I guess?
the one on the right looks to be getting smaller. maybe i'll send ebay seller a message. give me my money back!

I also have spiderwebs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my iPhone using Tapatalk

markdapimp said:
I also have spiderwebs
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hahah wow.. same spots as mine.. my right one was as big as that one but i somehow managed to get it smaller.. maybe next time I'll get something better.. but for now, I won't even try to fix it.

NJ_RAMS_FAN said:
yea, the screen part if fine but it's annoying to see the webs. ... I'll keep it on until it gets worse I guess?
the one on the right looks to be getting smaller. maybe i'll send ebay seller a message. give me my money back!
Click to expand...
Click to collapse
use binder clip and microfibre cloth, clamp on it and apply pressure, it'll be gone in an hour or two, it worked for me. Am a happy user right now.
Note that this is my second tempered glass protector and both of them surprisingly have the same spiderweb spot as per the one you have on the right which is the bigger one, someone said it's due to the nature of the glass not being perfectly even.

Stanlehh said:
use binder clip and microfibre cloth, clamp on it and apply pressure, it'll be gone in an hour or two, it worked for me. Am a happy user right now.
Note that this is my second tempered glass protector and both of them surprisingly have the same spiderweb spot as per the one you have on the right which is the bigger one, someone said it's due to the nature of the glass not being perfectly even.
Click to expand...
Click to collapse
i'm afraid to try that. My first glass protector and afraid if it will indeed break with all that pressure I put on it. even break the actual glass .. but here goes..

NJ_RAMS_FAN said:
i'm afraid to try that. My first glass protector and afraid if it will indeed break with all that pressure I put on it. even break the actual glass .. but here goes..
Click to expand...
Click to collapse
note that i broke my first one while trying to exert alot of pressure using my sd card reading with a small surface area.
It was then when I reapplied a second one and realized hey! why is there a similar spider web in the EXACT same spot! Then i read that using a binder clip with microfibre cloth worked for others. They did mention that it will work on protectors freshly applied, those with spiderwebs left there for a longer period of time might need to use the binder clip for a longer time or it might not work for them.

Related

TPU Hard Plastic Case Ebay

After waiting for 2 weeks i finally got my TPU case from Ebay
Here is the Link...
Well after waiting for 2 weeks i finally got my case and i LOVE it!!
Its clear plastic on the back and on the side its TPU white!
Everything is cut perfect! i dont have to press hard on the side for volume and power and the charging port fits perfect and the headphone fit perfect!
Plus fits perfect in my pouch! I really recommend the case, The material is really good! I have no other words!
http://www.ebay.com/itm/Clear-TPU-H...552903&po=LVI&ps=63&clkid=8022542502574272915
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You're not going to tell us what you think of the case then?
I edit the post i was to busy here at work... but sorry if i didnt told you guys if i liked the case or not...
ALIHISGREAT said:
You're not going to tell us what you think of the case then?
Click to expand...
Click to collapse
JUSMEJOSE said:
I edit the post i was to busy here at work... but sorry if i didnt told you guys if i liked the case or not...
Click to expand...
Click to collapse
Looks cool but looks like not very protective since the screen and back are super exposed
What are you talking about?... its protective from the back... its clear plastic on the back and white TPU on the side
davidrules7778 said:
Looks cool but looks like not very protective since the screen and back are super exposed
Click to expand...
Click to collapse
JUSMEJOSE said:
What are you talking about?... its protective from the back... its clear plastic on the back and white TPU on the side
Click to expand...
Click to collapse
oh LOL sorry i didn't know the back was clear as it is very clear!!!
I might have to get one, any other colors?
---------- Post added at 02:43 PM ---------- Previous post was at 02:37 PM ----------
Question:
Is the back a separate piece?
I kinds want that clear back but mixed with a black case..
I have seen other colors but i didnt like them.. its one piece
davidrules7778 said:
oh LOL sorry i didn't know the back was clear as it is very clear!!!
I might have to get one, any other colors?
---------- Post added at 02:43 PM ---------- Previous post was at 02:37 PM ----------
Question:
Is the back a separate piece?
I kinds want that clear back but mixed with a black case..
Click to expand...
Click to collapse
JUSMEJOSE said:
I have seen other colors but i didnt like them.. its one piece
Click to expand...
Click to collapse
One more question is the screen covered too by the case? And is clear? Cause that is a deal breaker
Sent from my SPH-D700 using xda premium
Nice screen protector. is it a matte finish? If so, doesn't it look grainy on white screens?
Nope the screen its cover by a matte screen protector I have some extra pieces here at work let me if u need one and I'll send you some to you
davidrules7778 said:
One more question is the screen covered too by the case? And is clear? Cause that is a deal breaker
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Sent from my Galaxy Nexus using XDA
Yeah but it still looks nice I had no choice because since a have a greasy face so yeah
Deekayy said:
Nice screen protector. is it a matte finish? If so, doesn't it look grainy on white screens?
Click to expand...
Click to collapse
Sent from my Galaxy Nexus using XDA
Does this works with Sprint Gn ?
Sent from my Galaxy Nexus using Tapatalk 2
jalexishg said:
Does this works with Sprint Gn ?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Honestly I don't know
Sent from my Galaxy Nexus using XDA
I actually ordered one of these 2 days ago! I'm glad it looks nice, looks exactly what I wanted it to look, so thanks for posting the pics! I also ordered a Cruzer Lite case that I like a lot.
Also where did you get your screen protector? I want a matte one, but one that doesn't affect the beauty of the screen. Thanks man!
This looks unique and for four bucks I got myself the case and free shipping to Greece! An outstanding deal! Thanks for your post!
Well thats the problem with matte screen protector it takes the beauty of the screen a little bit... i have extra matte screen protectors if u wanna try one let me know ill ship it to you...
Actually i was gonna order one the other Cruzer TPU when u get it let me know or post pics of it
Thank you
mackster248 said:
I actually ordered one of these 2 days ago! I'm glad it looks nice, looks exactly what I wanted it to look, so thanks for posting the pics! I also ordered a Cruzer Lite case that I like a lot.
Also where did you get your screen protector? I want a matte one, but one that doesn't affect the beauty of the screen. Thanks man!
Click to expand...
Click to collapse
Thanks i was gonna order a $30 protector just in case if u didnt liked it... But thank god its perfect!
haki.gr said:
This looks unique and for four bucks I got myself the case and free shipping to Greece! An outstanding deal! Thanks for your post!
Click to expand...
Click to collapse
JUSMEJOSE said:
Well thats the problem with matte screen protector it takes the beauty of the screen a little bit... i have extra matte screen protectors if u wanna try one let me know ill ship it to you...
Actually i was gonna order one the other Cruzer TPU when u get it let me know or post pics of it
Thank you
Click to expand...
Click to collapse
Oh really? If you don't mind I'd definitely love to try it. Was it easy to put on? I'll DM you my address then.
And here's some pics of the Cruzer Light case, me and my friend god the clear'ish one. His is the white GNex and mine's the regular metallic great color.
White GNex:
http://i.imgur.com/iDcTe.jpg
http://i.imgur.com/wa27I.jpg
http://i.imgur.com/7Ron9.jpg
Metallic GNex:
https://p.twimg.com/ArhymdlCMAAhLJB.jpg
http://a.yfrog.com/img877/6458/h2fzch.jpg
https://p.twimg.com/AriHMk1CIAAae0T.jpg
They're both the clear version of the case.
yeah the only part that doesnt cover its on the TIPS since the phone is a little curvy end side
But when you put your case it wont show....
mackster248 said:
Oh really? If you don't mind I'd definitely love to try it. Was it easy to put on? I'll DM you my address then.
And here's some pics of the Cruzer Light case, me and my friend god the clear'ish one. His is the white GNex and mine's the regular metallic great color.
White GNex:
http://i.imgur.com/iDcTe.jpg
http://i.imgur.com/wa27I.jpg
http://i.imgur.com/7Ron9.jpg
Metallic GNex:
https://p.twimg.com/ArhymdlCMAAhLJB.jpg
http://a.yfrog.com/img877/6458/h2fzch.jpg
https://p.twimg.com/AriHMk1CIAAae0T.jpg
They're both the clear version of the case.
Click to expand...
Click to collapse
JUSMEJOSE said:
yeah the only part that doesnt cover its on the TIPS since the phone has a curvy
Click to expand...
Click to collapse
Well that's fine, still look like a good protector from your pics. I can't send you a PM as you've disabled it, you can send me one then. Also, is that the limited edition Nexus that you have that Google gave to their employees? Seems like it with that design you have i the back plate.

[Coupon] Up to 80% off XtremeGuard Screen/Full Body Protectors!

Just received this email from XtremeGuard, hope this is useful for you folks!
http://www.xtremeguard.com/Default.asp
XtremeGuard 4th of July BLOWOUT SALE! Get 60% off 2 - 70% off 3 - 80% of 5 or more sitewide on ALL Screen and Full Body Protectors
COUPON CODES:
Fireworks60 - (60% off when you order 2 or more)
Liberty70 - (70% off when you order 3 or more)
Freedom80 - (80% off when you order 5 or more)
Devices include the new Samsung Galaxy S3, HTC EVO 4G LTE, iPhone 4S and The New iPad
*Discount cannot be used in conjunction with any other offer, we reserve the right to change or cancel the promotion at anytime. Void where prohibited, not valid on any previous purchases or sales. Good for a limited time only. Limit one time use per customer.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was somehow unable to get "Fireworks60" to work but I was able to get "Freedom80" to correctly work. Thanks :good:
ohhh you beat me to it...lol i got the same email and was about to post it up here!!!
but doesnt matter!
I have to say I didn't like the protector I bought for my droid charge (it was horribly miscut) but the fact that they refunded my money before I even sent them back like they told me to was nice. I will now keep it around and at least try it on my S3.
Boo_Wii said:
ohhh you beat me to it...lol i got the same email and was about to post it up here!!!
but doesnt matter!
Click to expand...
Click to collapse
Haha! If you're not fast, you're last my friend!
Tazer2death said:
I have to say I didn't like the protector I bought for my droid charge (it was horribly miscut) but the fact that they refunded my money before I even sent them back like they told me to was nice. I will now keep it around and at least try it on my S3.
Click to expand...
Click to collapse
You must've just been unlucky to be honest, my S3 ones fitted perfectly. Although I kinda wish they gave you the sides as well, they are still prone to scratches as well as the screen and back cover of the device!
Other than the black specks, which you must wash off thoroughly if you get any in your order, I can say so far mine has held up and working as well as my Skinomi did..
MscTch said:
hoping this one doesn't go this route...lol...hahaha
http://forum.xda-developers.com/showthread.php?t=1695024
Click to expand...
Click to collapse
There's always the $0.99 free shipping route via Amazon
hoping this one doesn't go this route...lol...hahaha
http://forum.xda-developers.com/showthread.php?t=1695024
These scree protectors suck.
Sent from my GT-I9300 using xda app-developers app
Seems like they are using a thinner material. I have already replaced 2 of these screen protectors because they keep lifting up. I have tried 3 different tpu cases and they all push up this screen protector.
JoshXcuhz said:
Seems like they are using a thinner material. I have already replaced 2 of these screen protectors because they keep lifting up. I have tried 3 different tpu cases and they all push up this screen protector.
Click to expand...
Click to collapse
They just suck simple as that. I don't recommend them.
Sent from my GT-I9300 using xda app-developers app
SlimJ87D said:
They just suck simple as that. I don't recommend them.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I agree! Just do not buy it... I bought one and I regretted
I bought these via the last thread about them a few weeks back. The cut out for the camera etc has to be the worst I have ever seen on a protector, It's not inline with anything and to steal a phrase someone else used in the thread as it explains perfectly looks lIke they where cut out by a blind sIx year old chIld. After a while the back plate protector developed a yellow tinge and looks horrible. The rest I've thrown in the bin. These are cheap in every sense of the word but also expensive for what they are even with a 80% discount. Their basically disposable protectors that will need changing regularily say every week or so if you want to keep your phone looking nice.
Not sure what you guys received, but here is a picture of my phone with the screen protector installed. It is working just as my invisishield, skinomi and shieldguard protectors have.
clockcycle said:
Not sure what you guys received, but here is a picture of my phone with the screen protector installed. It is working just as my invisishield, skinomi and shieldguard protectors have.
Click to expand...
Click to collapse
Yeah I thought everything was fine and dandy also till I put a crystal clear screen protector on and realized these distorted the screen too much.
Sent from my GT-I9300 using xda app-developers app
SlimJ87D said:
Yeah I thought everything was fine and dandy also till I put a crystal clear screen protector on and realized these distorted the screen too much.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
It's a trade off for multi layered self healing that can take the energy off a screen hit.
If there a difference in distortion or clarity when the screen is on? For what mine does, I am satisfied.
clockcycle said:
It's a trade off for multi layered self healing that can take the energy off a screen hit.
If there a difference in distortion or clarity when the screen is on? For what mine does, I am satisfied.
Click to expand...
Click to collapse
I just gave it a try for about a month and thought it also looked good until I decided to give other protectors a try to compare and the moment I took it off the screen just looked way way better. Then I slapped on a dry screen protector that is virtually invisible. Have it side by side by my friends sgs3 attention and sgs3 tmobile with same images, can't even see it or tell.
Sent from my GT-I9300 using xda app-developers app
SlimJ87D said:
I just gave it a try for about a month and thought it also looked good until I decided to give other protectors a try to compare and the moment I took it off the screen just looked way way better. Then I slapped on a dry screen protector that is virtually invisible. Have it side by side by my friends sgs3 attention and sgs3 tmobile with same images, can't even see it or tell.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I've used many dry protectors, everyone of them has had the same result, sure they look great and clear, but they always start gather soot at the edges and start to peel. Once that event beings it doesn't end there..
Expired July 9th 2012, someone please post a new one quick
finally i got my order yesterday... never been so happy.. this is actually my second order, but now its for ipad, iphone and my s2..
Bought these when they had the 80% off and they are horrible. I put them on 2 phones and promptly took them off and gave away the remaining 3. Kudos to those that like them, but to me they were cloudy and I was clearly able to tell there was a screen protector on.

Mime USA Ghost Glass for the HTC One [Review & First Impressions]

Mime USA recently released their "Ghost Glass" screen shield for the HTC One. I have received and installed mine onto my phone.
[First Impressions]
Let me start off by saying wow, this screen shield is superb. You honestly cannot tell it's on your device when you're looking at your screen. It is crystal clear as all glass shields should be. The oleophobic coating on this shield makes your screen feel outstanding. It feels smoother and more silky than the naked screen of the HTC One. Your finger quite literally just glide across the screen while you are using it. It's a truly incredible sensation. I can't really say how please I am with this shield right off the bat. Mime USA did an outstanding job on every aspect of this product from the packaging to the included content to the shield itself. Everything is outstanding. Shout out to Mime USA for doing their job so very well. (Link to product at bottom of post)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see in the pictures, the "Ghost Glass" features rounded edges to prevent chipping and only adds a mere 0.32 mm thickness while retaining a surface hardness of 9H. You may notice some small areas on the corners where the glass doesn't appear to have adhered to the screen. Mime USA says that these and any air bubbles you can't squeegee out will disappear within 2-3 days. Honestly I can't say I'm worried about those little bubbles on the corners. Even if they don't fully disappear, they are so small I don't even notice them while using my phone. Honestly I cannot find a single thing to complain about with this product and am very satisfied.
Hopefully this sort of mini review/first impressions will help anyone who is undecided about this product. And if you have any questions at all please feel free to ask them and either myself or someone else with this product can try to help you find an answer.
Thanks guys,
Pure+
Here's a link to the product page- http://mimeusa.com/product/htc-one-ghost-glass-tempered-glass-screen-protector/
Sent from my HTC One using Tapatalk 4 Beta
Wish listed the thickness, but it looks like another good choice to have.
tyler.durden said:
Wish listed the thickness, but it looks like another good choice to have.
Click to expand...
Click to collapse
All of their other protectors seem to be on track with the thickness of the spigen products. This should be the same. So I'm guessing .4 mm
Sent from my HTC One using Tapatalk 4 Beta
Is this .4mm thin? Don't see them mentioning about the thickness..
lexi250 said:
Is this .4mm thin? Don't see them mentioning about the thickness..
Click to expand...
Click to collapse
Like I said. There products seem to be on track with that of spigen. I said earlier if I had to guess it would be .4 mm. That is just my guess though.
Sent from my HTC One using Tapatalk 4 Beta
Interesting, the site says this:
"Please note firmware 1.29.709.12 or newer is required for use with our HTC One Ghost Glass"
I guess they don't want people complaining because the back button isn't sensitive...
stevedebi said:
Interesting, the site says this:
"Please note firmware 1.29.709.12 or newer is required for use with our HTC One Ghost Glass"
I guess they don't want people complaining because the back button isn't sensitive...
Click to expand...
Click to collapse
Yes it does require that firmware for everything except the AT&T variant which needs 1.26.502.12 or newer.
Sent from my HTC One using Tapatalk 4 Beta
stevedebi said:
Interesting, the site says this:
"Please note firmware 1.29.709.12 or newer is required for use with our HTC One Ghost Glass"
I guess they don't want people complaining because the back button isn't sensitive...
Click to expand...
Click to collapse
And yes you are correct. It is due to the button sensitivity issues.
Sent from my HTC One using Tapatalk 4 Beta
Pure+ said:
Yes it does require that firmware for everything except the AT&T variant which needs 1.26.502.12 or newer.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
So will it work for us and with most custom roms here??
---------- Post added at 03:07 PM ---------- Previous post was at 02:59 PM ----------
tyler.durden said:
Wish listed the thickness, but it looks like another good choice to have.
Click to expand...
Click to collapse
I would assume its .4mm since the recently released GS4 SP is said to be .4mm in this video
naturecannon said:
So will it work for us and with most custom roms here??
---------- Post added at 03:07 PM ---------- Previous post was at 02:59 PM ----------
I would assume its .4mm since the recently released GS4 SP is said to be .4mm in this video
Click to expand...
Click to collapse
The spigen sgp products work son this should as well. I have ordered one. I'll let you all know.
Sent from my HTC One using Tapatalk 4 Beta
They're .32 mm. I assumed it would be thinner than the SGS4 one because it's a simple rectangle.
PcFish said:
They're .32 mm. I assumed it would be thinner than the SGS4 one because it's a simple rectangle.
Click to expand...
Click to collapse
AMAZING! Why didn't I think to email them? Wow I feel lame.
nice!!! waits for update
switchblademaster said:
nice!!! waits for update
Click to expand...
Click to collapse
I have a HTC__001 in the UK with 29.401.12 will I need an update for this to work?
deadman3000 said:
I have a HTC__001 in the UK with 29.401.12 will I need an update for this to work?
Click to expand...
Click to collapse
Yes I belive you do. But don't quote me on that. I can't be positive.
deadman3000 said:
I have a HTC__001 in the UK with 29.401.12 will I need an update for this to work?
Click to expand...
Click to collapse
Again dont quote me, but im sure the captive issues where with the 1.28 , 1.29 is the first update which should fix things!
So any one got some reviews on this? How does it feel? Is it smudge and scratch resistant? How's the clarity? Also: How hard was the installation process, was there any air bubbles, etc.
I just bough it off their store and waiting for shipment.
I almost order this but read on the S4 forum and seems like some users reported that they got some kind of "strip" appeared on the screen. They release a v.2 for Galaxy S4 already but I'm not sure if our version will affect.
I'm interested in getting one of these for my H1!
I'm completely naked atm but I am thinking of a clear TPu case and one of these screen protectors!
I wonder how it feels under touch as the HTC One screen feels quite 'soft' to the touch.
Anyone have one? we'd welcome reviews!
Can someone please explain to me the appeal of these glass screen protectors over something like a zagg which I am using now? The zagg will never scratch since it is self healing, plus lifetime warranty. Why would someone want a glass screen protector?

MIME tempered glass screen protector

Ok here is the deal, no one makes a glass screen protector for the Note 10.1 2014 other than some people that sell one on ebay. I did order it and it came broken and it was crap
I contacted MIME since i do own one of their screen protectors for my Note 3 and This is what they said.
Thank you for checking us out and thank you for your interest! We are in the process of working on gauging demand for Note 10.1 glass at the moment. Your input is valuable, and will be highlighted during our next meeting. Glass for tablets is more challenging to cut than glass for phones, but with enough support for this device, we will definitely make it happen.
Click to expand...
Click to collapse
So post here and lets show some support so they can make this happen. They make great screen protectors and back it up with a good warranty.
Ill link this thread when a lot of people post showing support.
Mimeusa. Com is their site. They are on Facebook as well
I would love a MIME tempered glass screen protector, definitely support and would buy when it comes out.
Sent from my HTC One using Tapatalk
I would too, I've been waiting on a tempered glass screen protector since getting this tablet on launch day.
Sent from my SM-P600 using Tapatalk
Spread the word and post. The more the better
Sent from my SM-N900A using Tapatalk
+1, would buy.
Me Too
+1 for galaxy note 10.1 2014 LTE
Agreed I got the Ghost Glass for my S4 and now for my Note 3. I would LOVE for them to add the Note 10.1 2014 Edition! I'd buy one right now. Actually come to think of it, I might want a feather glass one instead. I have the Ghost Glass for my Note 3 and the Spen is ever so slightly off compared to when i used it with no Ghost Glass. The Ghost Glass is .32mm thick while the Feather Glass is only .15mm thick which I'm guessing would make a difference in the Spen's accuracy. So if they can make the Feather Glass in a size for the Note 10.1 '14 I'd go that route first. If not then Ghost Glass it is. If I ever crack my Ghost Glass, ill be buying the Feather Glass for my Note 3 next.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just started using these together work perfect and glass came fast and with ridiculous safe shipping
Sent from my SM-P600 using Tapatalk
Only down side is device becomes very heavy
Sent from my SM-P600 using Tapatalk
bulvine420 said:
View attachment 2606750
Just started using these together work perfect and glass came fast and with ridiculous safe shipping
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
I ordered that one and there is a good 1+mm gap around all four sides of the actual screen. I never installed it as it would drive me insane.
I have mime on my note3 and love it Please make one for the note 10.1 2014!!!
Sent from my SM-N900T using Tapatalk
bulvine420 said:
View attachment 2606750
Just started using these together work perfect and glass came fast and with ridiculous safe shipping
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Im using the same case and i bet that is the same glass i ordered off ebay. A lot of people are selling it because its the only one being made.
Mine came broken, they offered a replacement and a gift but i asked for a refund. I just didn't like the quality. The edges are not round
Thats why im hope a lot of people show support for this one because i know MIME makes quality screen protectors and they offer a good warranty
Out tablets are not cheap, so why not protect them with something with quality
Sent from my SM-N900A using Tapatalk
wingdo said:
I ordered that one and there is a good 1+mm gap around all four sides of the actual screen. I never installed it as it would drive me insane.
Click to expand...
Click to collapse
If you get it on perfectly it wont be that bad .
Sent from my SCH-I545 using Tapatalk
I guess there is not a lot of interest on a quality glass protector lol
Sent from my SM-N900A using Tapatalk
Side note: I've had the original Tab 10.1 for almost 3 years now and haven't put a screen protector on it. Up until I bought the Note a week ago it got heavy, daily use. Maybe 7 hours per day between work and home. There are ZERO scratches on the screen. Unless the technology for screens has taken steps backwards in the last 3 years I wouldn't worry about it on the Note.
However, I do put one on my phone since that goes into my pocket with my keys.
I never put one on my nexus 7 either and no issues. I agree but this tablet is larger and $ so a little piece of mind is nice. It would drive me nuts trying to watch a movie with a scratch on the screen lol
Sent from my SM-N900A using Tapatalk
Mayonesa said:
Ok here is the deal, no one makes a glass screen protector for the Note 10.1 2014 other than some people that sell one on ebay. I did order it and it came broken and it was crap
I contacted MIME since i do own one of their screen protectors for my Note 3 and This is what they said.
So post here and lets show some support so they can make this happen. They make great screen protectors and back it up with a good warranty.
Ill link this thread when a lot of people post showing support.
Mimeusa. Com is their site. They are on Facebook as well
Click to expand...
Click to collapse
I ordered mine off ebay, and it is absolutely perfect. It cost $18 with free shipping.
http://www.ebay.com/itm/370970771223?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
On the same token, with my Note 3, I ordered a Spigen Temp Glass Screen Protector for $30.. When I got it, I had to send it back for a full refund. It would not stay attached to my Note 3. In turn, I ordered a temp glass off Ebay for the Note 3, for $7.50, and it also was perfect. So, here we have the same items, but opposite experiences with each. And we both be correct..
---------- Post added at 01:30 PM ---------- Previous post was at 01:02 PM ----------
bulvine420 said:
If you get it on perfectly it wont be that bad .
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
My Ebay temp glass screen protector fits PERFECTLY..
Here it is, in my two Ebay bumper kickstand cases..
:good:
CehowardNote3 said:
I ordered mine off ebay, and it is absolutely perfect. It cost $18 with free shipping.
http://www.ebay.com/itm/370970771223?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
On the same token, with my Note 3, I ordered a Spigen Temp Glass Screen Protector for $30.. When I got it, I had to send it back for a full refund. It would not stay attached to my Note 3. In turn, I ordered a temp glass off Ebay for the Note 3, for $7.50, and it also was perfect. So, here we have the same items, but opposite experiences with each. And we both be correct..
---------- Post added at 01:30 PM ---------- Previous post was at 01:02 PM ----------
My Ebay temp glass screen protector fits PERFECTLY..
Here it is, in my two Ebay bumper kickstand cases..
:good:
Click to expand...
Click to collapse
Don't you just love this tablet? All I need to do to convince people to ditch there iPad is pull out my spen with the light saber mod then it's all she wrote
Sent from my SM-P600 using Tapatalk
CehowardNote3 said:
I ordered mine off ebay, and it is absolutely perfect. It cost $18 with free shipping.
http://www.ebay.com/itm/370970771223?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
On the same token, with my Note 3, I ordered a Spigen Temp Glass Screen Protector for $30.. When I got it, I had to send it back for a full refund. It would not stay attached to my Note 3. In turn, I ordered a temp glass off Ebay for the Note 3, for $7.50, and it also was perfect. So, here we have the same items, but opposite experiences with each. And we both be correct..
---------- Post added at 01:30 PM ---------- Previous post was at 01:02 PM ----------
My Ebay temp glass screen protector fits PERFECTLY..
Here it is, in my two Ebay bumper kickstand cases..
:good:
Click to expand...
Click to collapse
I have the same case on mine and i did order that same glass from ebay but it came broken. I asked for a refund
I didnt like that it doesn't have rounded edges. Felt cheap. I still have it but of course its broken
I got a Mime on my note 3 and love it
Sent from my SM-N900A using Tapatalk
bulvine420 said:
Don't you just love this tablet? All I need to do to convince people to ditch there iPad is pull out my spen with the light saber mod then it's all she wrote
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Yes, sadly it has turned me into a Samsung Fanboy!

Tudia slim TPU case review

I pre ordered the Tudia case from Amazon.com on Sunday Aug. 3rd and received it on Wednesday August 6th.
Inside the small bubble envelope, I found the case. It was packaged in plastic like many other Chinese cases. It even included a cardboard dummy phone with Chinese writing.
I tore into the plastic and found that despite the cheap container, the case is fairly nice. It isn't very thick and barely adds any overall thickness to the phone. The back of the case feels a bit like velvety rubber, and on the top and bottom ends the plastic is glossy and smooth.
The holes on the case match up perfectly with all of the holes on my device.
The front lip of the case sticks out far enough to protect the Screen when the phone is face down.
The buttons line up nicely, and are easy to press.
I bought this case because I needed a tough case for work. Unfortunately, this case is no different than any other TPU case that I've owned. It seems that it will provide enough protection for day to day things, but if you are looking for extra protection, look elsewhere.
Overall, I think the price is a bit high for what I got. The case looks nice, but I'm a fan of the sandstone back that comes on the phone and if I'm going to cover it up, I'd prefer to cover it with something with more protection. Also, the case is a bit more slippery than the original back of the phone. The phone offers no more protection than any of the 99 cent cases on ebay.
http://www.amazon.com/gp/aw/d/B00LW...s One"&qid=1406234816&ref_=sr_1_1&sr=8-1
Thanks to info from Charlieb620 and Knight-Rider, it has been confirmed that this case works well with a tempered glass screen protector. To see photos, go to this post...
http://forum.xda-developers.com/showthread.php?p=54662999
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Will it play well with a glass screen protector?
It appears to have enough room for a glass screen protector, but I can't give you a definite answer because I haven't tried it. There is a very small gap between the lip and the screen. I suppose it depends on the thickness of your screen protector.
Others will be receiving them today and tomorrow and someone will probably chime in with your answer.
Thanks for the review!
Ordered that same one yesterday and one of those aluminum bumpercases the day I got my invite - of course neither will show till next week I'm guessing
So far the only issue I have found getting a new phone from a small company is lack of accessories, the ones I'm finding aren't exactly what I want but will make due.
Just hope more options show over the next few months!
demkantor said:
Thanks for the review!
Ordered that same one yesterday and one of those aluminum bumpercases the day I got my invite - of course neither will show till next week I'm guessing
So far the only issue I have found getting a new phone from a small company is lack of accessories, the ones I'm finding aren't exactly what I want but will make due.
Just hope more options show over the next few months!
Click to expand...
Click to collapse
No problem. I'm hoping someone offers a more rugged case soon. I just recently got my one plus one also and I've found it hard to get nice accessories. I'm sure I'll jump to the next big thing in a few months though. This is my third phone this year, so it's a trend lately.
Nice review....
Can you resize your photos?
mbudden said:
Nice review....
Can you resize your photos?
Click to expand...
Click to collapse
How are they showing up? I did all of this on mobile and they came out fine. Are they insanely huge on the desktop version? I can get online and change their size shortly if so.
tpierce89 said:
How are they showing up? I did all of this on mobile and they came out fine. Are they insanely huge on the desktop version? I can get online and change their size shortly if so.
Click to expand...
Click to collapse
They're big but I like it that way, we can get to see more detail.
zephiK said:
They're big but I like it that way, we can get to see more detail.
Click to expand...
Click to collapse
Hopefully they are somewhat clear. I took all of them except the last few with the One camera. It doesn't seem to be as clear as my note 3 camera, but I'm still trying to learn all the bells and whistles. I like this phone though.
tpierce89 said:
Hopefully they are somewhat clear. I took all of them except the last two with the One camera. It doesn't seem to be as clear as my note 3 camera, but I'm still trying to learn all the bells and whistles. I like this phone though.
Click to expand...
Click to collapse
Pictures look great. I'm waiting for my Diztronic case, it arrives tomorrow. Planning to have any developmental projects for the OPO?
zephiK said:
Pictures look great. I'm waiting for my Diztronic case, it arrives tomorrow. Planning to have any developmental projects for the OPO?
Click to expand...
Click to collapse
Thanks! Maybe so. I have a few things I'm working on for all devices. I develop apps mostly, but all this "theme" stuff has piqued my interests.
Aside from that, I'd really like to join a ROM Dev group and work with other developers.
I received both my Tudia and glass protector.
Sent from my A0001 using Tapatalk
charlieb620 said:
I received both my Tudia and glass protector.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
If it fits well, send me a link and ill update the Op. Thanks
Tudia+Glass Protector.
Perfect Fit.
Here is the link for the protector....
9H all that good stuff
http://pages.ebay.com/link/?nav=item.view&id=311029665158&alt=web
Sent from my A0001 using Tapatalk
charlieb620 said:
Will it play well with a glass screen protector?
Click to expand...
Click to collapse
It does i have the same case with tempered glass and the case wraps around the top. Extremely nice fit with no issues.
tpierce89 said:
It appears to have enough room for a glass screen protector, but I can't give you a definite answer because I haven't tried it. There is a very small gap between the lip and the screen. I suppose it depends on the thickness of your screen protector.
Others will be receiving them today and tomorrow and someone will probably chime in with your answer.
Click to expand...
Click to collapse
Fits perfect.
Sent from my One using XDA Premium 4 mobile app
---------- Post added at 06:50 PM ---------- Previous post was at 06:45 PM ----------
Just to add my tempered glass screen protector is a 9H 0.3mm thick version I know there's a .25mm as well.
Sent from my One using XDA Premium 4 mobile app
Holy Icons Batman......
My case came toady as well.....review is spot on......noticed yours had the same injection "nub" on the bottom as well
Diztronics in matte red is waiting at home, when I get there Friday.....
Here's 2 pic with .3mm tempered glass protector.
Sent from my One using XDA Premium 4 mobile app
rcdd said:
Holy Icons Batman......
My case came toady as well.....review is spot on......noticed yours had the same injection "nub" on the bottom as well
Diztronics in matte red is waiting at home, when I get there Friday.....
Click to expand...
Click to collapse
Yep, I didn't want to complain about the injection nub on it, because I don't know if it is possible to make them without it, but it is noticeable for sure.
charlieb620 said:
Tudia+Glass Protector.
Perfect Fit.
Here is the link for the protector....
9H all that good stuff
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Holy apps!

Categories

Resources