Hi guys so I've been messing with kernels and BinDroid. Well it seems that the stock kernel provided by BinDroid has an invalid md5 and if the md5 is removed and I attempt to flash anyway it hangs in odin and won't flash. I cannot boot into TWRP to flash my zip files. I can't find any freaking tar back to stock. PLEASE HELP my tablet is currently UNUSABLE.
EDIT:
Tried to flash a stock md5 from SamMobile in odin 3.09. It came back fail during flashing system.img. Now it won't turn on dear god any ideas?
EDIT ITS NOT DEAD!!!!
It now comes to a screen saying Firmware upgrade encountered an issue please select recovery mode in Kies and try again. PLEASE PLEASE HELP
From emergency recovery screen I reflashed the image my device is now booting again!!! Huzzah!!!
Related
I just accepted the cyanogen 10 snapshot update today for my d2spr; after the update finished it left me stuck in a bootloop, and Im unable to access recovery! I want to go back to the rom I was at before the update, which was the cm-10.1.3. Please help!!
Download mode and flash a custom recovery tar
CNexus said:
Download mode and flash a custom recovery tar
Click to expand...
Click to collapse
Thanks for the reply, I just downloaded a stock rom from samsung, and flashed via odin. It was successful, however even with the stock rom, I am still stuck in a boot load, and it still wont let me into recovery mode....
Solved!!
So I finally solved the issue. After I had flashed the stock rom via odin, I needed to find away to wipe cache's and do a factory reset. I finally accomplished this by downloading the .pit file, and re-flashing it together with the stock rom all through odin. After doing so, I was finally able to get into recovery, wipe, and do a factory reset. For anyone else having this issue, here is a link where I found the .pit file, and a thread with some basic instructions:
:laugh:
PIT Files: http://d2tehp.chickenkiller.com:22222/pits/
Basic Instructions: http://teamuscellular.com/Forum/topic/3882-pit-files-for-all-us-variants-of-sgsiii/
plz help i was running criskelo v22 rom on my n7100 and then decided to upgrade to mj5 bootloader but it said failed while flashing in odin and now i can flash anything but can still acces download mode but odin cant flash a thing it always says failed what to do plzzzz and cant even boot to recovery it says update encountered issues plug it in kies recovery mode
fixed it
fixed it downloaded the pit file for my n7100 from here
http://d-h.st/Dlv (thx to dr ketan)
flashed it in odin with repartition ticked
then it passed , i took the battery out and put it in again and entered recovery mode and restored my nandroid backup and bam! booted up smoothly i wouldn't imagine my holidays without it
On trying to update (stock, not rooted SM-T310 device) it went into a bootloop and I CAN NOT access recovery. I can still get into download mode. I've attempted to flash the stock firmware for 4.2.2 using Odin, but it fails. I've also attempted to flash another recovery, ODIN reads it as a success but I still can't get into Recovery mode.
Any suggestions? Or is the device a complete brick now?
Thats is no problem,you must use the 4.4.2 Stock ROM with Odin and the Download Modus,after that should everythink be ok.The 4.2.2 is not working.
You can download it from here
http://www.sammobile.com/firmwares/1/?model=SM-T310&pcode=0#firmware
Still get a failure. On the Device it reads "SW REV. Check Fail. Device:2, Binary:1"
On Odin it seems to fail right after "NAND Write Start!!"
before /how i got here
i wanted to install a rom on my n5110
first I flashed twrp through odin and i could never access the recovery
so i tried to follow these instructions
https://wiki.lineageos.org/devices/n5110/install
which use heimball (i have used adb before, and i did have some trouble installing himball on el capitan, but managed to install version 1.4.1 since then i found that maybe it doesnt work anymore)
this is where the trouble started after flashing i was unable to access stock rom or recovery and was stuck at boot image.
after that I tried to flash this rom via odin (return to stock)
https://forum.xda-developers.com/showthread.php?t=2773712
now...
somehow this failled and i ended up with a screen that reads (firmware upgrade encountered an issue. please select recovery via kies....)
since then I have tried flashing again via the above method which failled
and another stock (N5110UEEMF1 from https://forum.xda-developers.com/showthread.php?t=2289441) which may have further confused things as realise that this is the out of the box stock and I was on kitkat
which gave the error " invalid magic string"
I have searched for a similar enough problem but not found please help
bump
Download the stock ROM from updato.com or sammobile.com and flash it with Odin. If it gets stuck in a bootloop after flashing the stock ROM, boot into recovery and perform a factory reset.
I recommend flashing with the original Samsung USB cable, a USB 2.0 port, and Odin 3.07.
I flashed TWRP then switched to CWM to try HYPER-ROM 11, then lineage-16, but they both ended up causing a boot loop,
so I decided to go back to stock,
but when I enter recovery mode it says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
And when I try to flash stock recovery with Odin 3.13 it gets stuck at recovery.img,
and when I try to flash stock ROM it gets stuck at system.img!
Your time and help are highly appreciated!
you need to enter download mode...not recovery mode
then use odin to flash stock rom
higger said:
you need to enter download mode...not recovery mode
then use odin to flash stock rom
Click to expand...
Click to collapse
I did, it gets stuck at system.img
Use odin to Flash twrp again ?