Rock Flip Case Magnetic Screen Stays Awake - Galaxy Note 10.1 (2014 Edition) Q&A, Help & Troubl

Hi All, I have been using this case for a few weeks and few times so far it appears the screen stays on for no reason, for example last night I looked at the battery before going to bed and it was 89% woke up 8 hours later and it was at 5% the on screen time was at 10 hours and I know I wasn't on my tablet for 10 hours. Can anyone suggest a fix? Can I disable the auto wake when I open and close the book case? Thanks in advance

The screen shud go off after a bit anyways even if the cover doesnt make the tablet sleep, make sure the screen timeout settings are on 2mins or something like that.
And about switching off the auto wake, I dont think theres a way but I could be wrong.
Sent from Galaxy Note 10.1 2014 Edition via Tapatalk.

Yes it does sometimes when I closer the case. But other times I close it and it stays awake...

my poetic does the same thing. the hand strap adds a raised area at the home button and it constantly gets pressed. plus the lip that holds the tablet shut doesnt hold well and also causes wakes. i've gone back to my ivso case. this is my first dissapointmenr by poetic.

madsquabbles said:
my poetic does the same thing. the hand strap adds a raised area at the home button and it constantly gets pressed. plus the lip that holds the tablet shut doesnt hold well and also causes wakes. i've gone back to my ivso case. this is my first dissapointmenr by poetic.
Click to expand...
Click to collapse
Which Poetic case do you have?

AMG_Roadster said:
Which Poetic case do you have?
Click to expand...
Click to collapse
http://www.amazon.com/Poetic-StrapB...&sr=1-2&keywords=poetic+galaxy+note+10.1+2014

Samsung Book Cover all the way LOL
Sent from Galaxy Note 10.1 2014 Edition via Tapatalk.

Related

Case for Power/Wake IR button

I find it very difficult to wake the phone with the power/wake button. Just the angle of the bezel and how flush the IR button is makes it much more of a chore compared to any other phone I've used. Does anyone know of a case that can remedy the situation? I don't care if it covers the IR.
I bought the poetic case off amazon (3rd revision) and it doesn't help with the flush power button issue. Since no one responded I'll keep updating as I get more cases. Sad.
I don't know how tough it is to remove the old poetic case (since everyone seem to gush about how difficult it is) but I don't find it very hard. Simply pry open one corner then expand the gap and it pops off pretty easily. I much rather have a tight case than a lose one *wink*
Currently waiting on basal case. Don't know if I should just exchange then phone because of the recessed button.
I came across this:
http://www.ebay.ca/itm/for-HTC-One-...hone_PDA_Cases&var&hash=item5d3d09adf1&_uhb=1
I think i might buy this one
isinisterx said:
I came across this:
http://www.ebay.ca/itm/for-HTC-One-...hone_PDA_Cases&var&hash=item5d3d09adf1&_uhb=1
I think i might buy this one
Click to expand...
Click to collapse
I have one for my One S, and honestly it's junk. Its hard to put in your pocket because its grippy, and it collects lint constantly.
The rubber inside feels cheap, and loose around the sides where there is no support.
Sent from my HTC One S using Tapatalk 2
Well thanks for that lool
Here is my remedy for the power button and its awkward position. Never use it. Find a kernel with swipe to wake and then I use a sleep widget on the home screen to sleep. I double tap the bottom of the screen to wake it up. Works perfectly
I got the urban armor gear one off of ebay
Sent from my HTC One using xda premium
Yep the basal case sucks too. I actually flashed cyanogenmod nightlys and use the swipe to unlock feature. Got to swipe all the captivate buttons kinda like iPhone. Unfortunately there is a slight lag but that'll probably get cleared up when more stable releases are out.
xxquicksh0txx said:
I have one for my One S, and honestly it's junk. Its hard to put in your pocket because its grippy, and it collects lint constantly.
The rubber inside feels cheap, and loose around the sides where there is no support.
Click to expand...
Click to collapse
That's because it is made of silicone. That's one material I hate... yes, even in the other way.
fffssslll said:
Yep the basal case sucks too. I actually flashed cyanogenmod nightlys and use the swipe to unlock feature. Got to swipe all the captivate buttons kinda like iPhone. Unfortunately there is a slight lag but that'll probably get cleared up when more stable releases are out.
Click to expand...
Click to collapse
Hmmm... for the time I'm running CM 10.1, I'm using volume wake and hold menu to lock. I'm sure it saves battery life because the capacitive panel is off when asleep. Plus when I had S2W enabled, it seemed that I could never get it right the first time.
Agreed, I too also had this case on my one s and it's really crappy and too loose in the areas where the hard plastic doesn't wrap the case
Sent from my HTC One using xda premium
The urban armor gear makes the volume button so much better than without it, though the wake button stays the same maybe even abit worse..

[Q] Smart Cover Problem

I owned a smart cover for my galaxy note 8.0, it can work properly like sleep and wake.
But here's the problem come,
usually the cover is cover the front of the tablet, but when we use it, we will flip the cover to the back of tablet.
while the cover touched the back side of the tablet, it will also put it as sleep.
so, how to disable smart cover auto sleep?
i had tried the "Lock instantly with power key", but it required at least security of "pattern"
Any ideas?
Need help! THANK YOU!:good:
I guess something is wrong either with your cover or device - putting the cover on the back should never put the device to sleep.
I don't recall anybody reporting similar problems here, also the small sample we have at home (2 notes + 2 covers) behaves correctly.
The best thing (although it's probably easier said than done) would be to establish which one is malfunctioning and have it replaced if possible.
otoh I would also be interested in a way to disable the cover on/off function - mine is so sensitive, that even the slight move of the front part wakes the device, causing increased battery drain and making betterbatterystats readings useless.
p107r0 said:
I guess something is wrong either with your cover or device - putting the cover on the back should never put the device to sleep.
I don't recall anybody reporting similar problems here, also the small sample we have at home (2 notes + 2 covers) behaves correctly.
The best thing (although it's probably easier said than done) would be to establish which one is malfunctioning and have it replaced if possible.
otoh I would also be interested in a way to disable the cover on/off function - mine is so sensitive, that even the slight move of the front part wakes the device, causing increased battery drain and making betterbatterystats readings useless.
Click to expand...
Click to collapse
Here's a YouTube video that shows you how to do that:
https://www.youtube.com/watch?v=GhB5kJGQKsI
exibm said:
Here's a YouTube video that shows you how to do that:
https://www.youtube.com/watch?v=GhB5kJGQKsI
Click to expand...
Click to collapse
thanks, but that's not it, my problem is sensitivity to magnets in the cover, not the home button
Sent from my GT-N5100 using xda premium
Yes I have the same problem... I bought some dodgy case off eBay. The magnets also interfee with the spen
Sent from my GT-N5110 using Tapatalk 4 Beta
I have seen that happen a lot with ipad cases. Its due to a poorly designed case.
flashlim said:
I owned a smart cover for my galaxy note 8.0, it can work properly like sleep and wake.
But here's the problem come,
usually the cover is cover the front of the tablet, but when we use it, we will flip the cover to the back of tablet.
while the cover touched the back side of the tablet, it will also put it as sleep.
so, how to disable smart cover auto sleep?
i had tried the "Lock instantly with power key", but it required at least security of "pattern"
Any ideas?
Need help! THANK YOU!:good:
Click to expand...
Click to collapse
p107r0 said:
thanks, but that's not it, my problem is sensitivity to magnets in the cover, not the home button
Sent from my GT-N5100 using xda premium
Click to expand...
Click to collapse
It happens all the time to me. Put it nicely in the back. Not a single bit cover the front. Shake the device a little bit. The cover hits the back of the device, make some noise and screen turns off. Magic. As if the device can sense magnet even by its back. But when it sits really tightly that no space bw it and the case, problem solved by put on some sticky tape in the back.
Smart cover not smart at all T^T~ but original case without having that problem right?
Smart cover problem
Still looking for a way to disable the software that causes auto sleep/wake.
The problem with some covers is that they are not authentic from the manufacturers. The original Samsung case for Note 8/N5100 has the correct magnetic power in the case flap. The other covers have a magnet that is too strong so when the flap is in the back the magnet still effects.
I surgically cut the magnet out of the cheep cover and closed it back up. Disabled auto wake with the modification. I am guessing the same could be done with the original authentic Samsung case but it is hard to cut the little magnet out because its built in seamlessly so you cant see the exact location of the magnet.
flashlim said:
Smart cover not smart at all T^T~ but original case without having that problem right?
Click to expand...
Click to collapse
Original Samsung book cover should not have that problem. i have been using the book cover for almost five months and not facing said issue.

case disable notification panel ?!

Hello,
i recently bought a 10.1 2014 and i got an official case with it.
This case got a magnetic band which is working pretty weirdly.
Actually i always thought that a tab will sleep when the cover close thanks to the light sensore.
This one detect the magnet, and even when i open it and put the cover behind the tab, it will sense the magnet and stop the screen.
This is annoying.
But worse, when i start the screen again and that the tab is still on the cover (which is behind fully opened) i wont be able to bring down the notification panel. this is insane...
Any idea why ? is my tab working wrong ? or its my Case which is totally ****e ?
http://cdn.androidcentral.com/sites/androidcentral.com/files/postimages/108579/note10case2.jpg this kind of case
digitalH said:
Hello,
i recently bought a 10.1 2014 and i got an official case with it.
This case got a magnetic band which is working pretty weirdly.
Actually i always thought that a tab will sleep when the cover close thanks to the light sensore.
This one detect the magnet, and even when i open it and put the cover behind the tab, it will sense the magnet and stop the screen.
This is annoying.
But worse, when i start the screen again and that the tab is still on the cover (which is behind fully opened) i wont be able to bring down the notification panel. this is insane...
Any idea why ? is my tab working wrong ? or its my Case which is totally ****e ?
http://cdn.androidcentral.com/sites/androidcentral.com/files/postimages/108579/note10case2.jpg this kind of case
Click to expand...
Click to collapse
Same thing happens to me with the moko slim fit case. I think it is due to the magnets being slightly stronger than average. I put a cloth between the case and the camera area and it stops it from doing that. Still I will probably send the case back. I have till the end of January to return it.
Sent from my SM-P600 using Tapatalk 4
This happened to me too and crashed the notification panel which is very annoying. I just tried put a piece of cloth b/t camera & case and see if that helps. I'm glad that I'm not the only one experience notification panel crashed or something.
Thank you for your answers.
If it can change the behavior of the system like this, do you think that after a time it might dammage the hardware to have a permanent magnet stuck to the tab ?
digitalH said:
Thank you for your answers.
If it can change the behavior of the system like this, do you think that after a time it might dammage the hardware to have a permanent magnet stuck to the tab ?
Click to expand...
Click to collapse
Sutely it will cause some permenant damage after using such cases for prolonged lenght of time which is why I never bothered with the cheapy cases, not worth the risk.
digitalH said:
Thank you for your answers.
If it can change the behavior of the system like this, do you think that after a time it might dammage the hardware to have a permanent magnet stuck to the tab ?
Click to expand...
Click to collapse
Its an official case get them to replace it.
>>X<< said:
Its an official case get them to replace it.
Click to expand...
Click to collapse
I sure will !

problem w/ magnetic cover... help!

Okay so i recently got a galaxy note 10.1 2014 ed. and i bought this ivso case for it: ww.amazon.com/Samsung-Edition-Bluetooth-Keyboard-Portfolio/dp/B00FJTV0PG
I like the case and the detachable keyboard but what i cannot stand is the effects the magnets have on the tablet. It makes it auto wake, which i guess is kind of nice, but when i fold it back around behind the tablet, it always auto locks my tablet. It also will not let me drag the drop down notification bar from the top when it is folded around the back.
Anyways, i was wondering if anyone knew of any apps or settings to disable the effects of the magnets on the tablet? I've spent hours googling and trying out different apps and whatnot but nothing helps.
Thanks in adv,
betaPartier
What I did was get a sharp knife and take the magnet out. Stick a velcro instead.
wannajump said:
What I did was get a sharp knife and take the magnet out. Stick a velcro instead.
Click to expand...
Click to collapse
Would you be able to share a few photo's to show us what you did.
.
Maybe have a look at [MOD][XPOSED] MotoMagnetOff
http://forum.xda-developers.com/showthread.php?t=2621807
Sent from my GT-N7100
I have same problem ,when I turn cover back,it turn the screen down . Actually ,I turn the cover back just want to hold it to pay a game. But it turn down, smart cover is not smart actually .
Sent from my SM-G900S using XDA Free mobile app
I folded some papers and slip it underneath the tablet in the case. It block the magnet so it won't off the screen when u flip the cover to the back.
The pen holder strap that comes with the cover is too small to hold my Wacom stylus feel. So, I got some stretchable strap, loop it and staple it to the paper. Now I can slip my stylus comfortably attachedge to the cover.
Sent from my SM-P605 using XDA Premium HD app
matsuru said:
The pen holder strap that comes with the cover is too small to hold my Wacom stylus feel.
Click to expand...
Click to collapse
Off topic, but how do you like the Wacom feel?
I'm thinking of getting one but I read that it is not as accurate as the default stylus, unless held at a 90 degree angle (!). Is that the case?
Sent from my SM-P600 using Tapatalk
There is a bit of offset. But it doesn't affect me much. Just write or draw like normal.
In apps like lecture notes, tgere is a setting where u can adjust the offset to make it accurate.
Sent from my SM-P605 using XDA Premium HD app
betaPartier said:
Okay so i recently got a galaxy note 10.1 2014 ed. and i bought this ivso case for it: ww.amazon.com/Samsung-Edition-Bluetooth-Keyboard-Portfolio/dp/B00FJTV0PG
I like the case and the detachable keyboard but what i cannot stand is the effects the magnets have on the tablet. It makes it auto wake, which i guess is kind of nice, but when i fold it back around behind the tablet, it always auto locks my tablet. It also will not let me drag the drop down notification bar from the top when it is folded around the back.
Anyways, i was wondering if anyone knew of any apps or settings to disable the effects of the magnets on the tablet? I've spent hours googling and trying out different apps and whatnot but nothing helps.
Thanks in adv,
betaPartier
Click to expand...
Click to collapse
I have the same problem. Did you figure out a way to disable the magnetic sensor?
degakc said:
I have the same problem. Did you figure out a way to disable the magnetic sensor?
Click to expand...
Click to collapse
No. I ended up just getting a different case that doesn't have a keyboard. Since there's no magnetic keyboard, the magnets aren't nearly as strong and only affects the tablet when I open it, not when I fold it around the back.
Thanks for the speedy response. On close inspection I noticed that there is a small magnet on the front cover top left corner about 1 inch from the top. almost invisible but can find it when we run a coin over the surface of the front cover. When the back side of the note 10.1 meets this magnet, screen switches off. I noted that by placing a magazine/ booklet between the front cover and the back when using in flipped over mode: the screen does not switch off. A small victory. But wish that samsung provides a solution 2 disable this magnetic screen off feature through a menu option.
i have same problem and i fix it by take out magnate from cover. i hope found a better way for this problem
Did anyone find any way to turn off the magnetic lock and unlock function? When I backfold my cover (aftermarket), it automatically locks my tab. Which is very irritating. I have Samsung galaxy tab S5e
You'd think that the guys who make these cases would just add a small amount of padding over the magnet so it only activates the sensor on the one side... To simple an idea I guess...

Auto-unlock works but auto-lock doesn’t? bad sensor?

I’m using an origami case with the tablet. The flap unlocks the screen just like it should when I flip it open. When I close it though, it doesn’t lock the screen. Sometime its fine as I’ve set the screen to turn off in 30 seconds. However, I noticed that XBMC keeps the screen on and I end up finding a dead battery the next day because the cover didn’t turn off the screen.
Do I have a faulty sensor? Its not the case because I tried another case/cover and it does the same thing.
Thanks
maximus96 said:
I’m using an origami case with the tablet. The flap unlocks the screen just like it should when I flip it open. When I close it though, it doesn’t lock the screen. Sometime its fine as I’ve set the screen to turn off in 30 seconds. However, I noticed that XBMC keeps the screen on and I end up finding a dead battery the next day because the cover didn’t turn off the screen.
Do I have a faulty sensor? Its not the case because I tried another case/cover and it does the same thing.
Thanks
Click to expand...
Click to collapse
If the "other" case was the same make and model it doesn't prove much. There have been tons of issues with non-Samsung flip and book covers across multiple device forums. Go to Best Buy and try an official case. If it works it's not your sensor.
bought another case today, this time the poetic slimline. just like the origami case, it auto unlocks the screen when opening, but doesn't auto lock when closing. tried the case on a friends 10.1 2014 and auto locking work so its definitely my tablet and not issues with the case...i'm not sure if its hardware or software as i'm running cleanrom w/ bindroid kernel. any suggestions? its not annoying enough to sent in for a fix since i can simply use the GMD gesture to quickly turn off the screen but its still a mystery to me.
thanks
edit: flashed the bindroid rom and now the tablet auto sleeps and wakes with the cover...i guess it was the software...

Categories

Resources