Related
Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
HELP! I tried this (http://forum.xda-developers.com/showthread.php?t=2085263) and got the nexus 4 buttons working. However, once I got to the disabling hardware buttons part, it all went to hell.
I think I may have screwed up the key map file because now my phone's power button is not working.
I can't lock the phone, I can't wake the screen.
However, once I offed the phone using an app, I can turn it on using the power button, so it definitely isn't broken.
Is there a solution to this? I don't have any warrenty and I'm freaking out!!!
Oh and yes, I've done a factory reset and no that didn't solve the issue.
Please help! Thanks in advance! :crying:
Hi!
I have cm11 by Maclaw on my Ace 2 and I can't figure out why when I turn off button backlight it freezes enabled when phone gets a message.
There's no problem when button illuminating is enabled. Is there any way to disable it completely?
I'm sorry if it was already asked before, but I couldn't find a solution.
slowsky said:
Hi!
I have cm11 by Maclaw on my Ace 2 and I can't figure out why when I turn off button backlight it freezes enabled when phone gets a message.
There's no problem when button illuminating is enabled. Is there any way to disable it completely?
I'm sorry if it was already asked before, but I couldn't find a solution.
Click to expand...
Click to collapse
use polish vodka LED fix
Thank you. I forgot about it
Hi guys,
my power button is broken, and sometimes if i forget to charge the battery, till the device is turn off, it's hard to turn it on again. i must press it harder many times till the device turn on
i can still use the volume button to turn it on (for just sleep state)
any software that can turn my device on?
i cannt use my cwm too, because the ok button for cwm, is this power button
thanks for reading my problem
any help would be helpful for me
Touch control.apk(you will find it on google)
h4xx0rr said:
Touch control.apk(you will find it on google)
Click to expand...
Click to collapse
i think that app cannt turn my device on, if it's completely off, am i right?
lawrain21 said:
i think that app cannt turn my device on, if it's completely off, am i right?
Click to expand...
Click to collapse
yes
So I activated Universal Switch on S6 Edge to check it out, something went wrong in the settings (long story short, got a pop up while setting it up), now screen unresponsive.
It works, I just get this blue horizontal line scanning the screen and nothing else but the power button and home button works. Tried safe mode, no bueno. How can I disable US feature without resetting to factory or at least no data wipe (if possible!)?
Android 5.0, rooted with pingpong, no custom recovery, knox 0x0.
All help is appreciated.
Same
[The exact same thing just happened to me someone please help
Fixed!
The way I had fixed this is by holding down the power button, both up and down sound buttons, and the home button until it restarted. When the device turned back on it gave the option to turn the setting off. Hope it helped!
ImJustBoss99 said:
The way I had fixed this is by holding down the power button, both up and down sound buttons, and the home button until it restarted. When the device turned back on it gave the option to turn the setting off. Hope it helped!
Click to expand...
Click to collapse
it works , thanks so much buddy , i love you:good:
how to turn off universal switch
hit home button 3 times
Thanks alot
It worked buddy
It doesn't give me the option to turn it off
Hi,
I have been struggling with Universal Switch on a Samsung S5 Neo. I switched it on, but was never able to switch it off again.
These are findings so far:
-> Did a factory reset using "Sound Up", "Home" and "Power" button simultaneous.
-> The device comes back and wants to configure itself again.
-> I restored my settings from Google, but this immediately brought back "Universal Switch"
-> Factory Reset again and configured the device, but told Google that I want to use it as a "New Device".
-> Now I can use my device in a proper way.
-> In Google Play Store I find all my Apps which were linked to my account and reinstalled them and I am back in business again.
-> Took me half a day to sort this out.
The programmer who designed and programmed this should be hung and shot and poisoned, because this is absolute Crapware.
Hope this helps for all the others who are suffering.
You can also push the home button three times and it should turn it off.
thank u ur the best
Ok, so i have exactly the same problem except my home button doesn't work
Anyone one know how to sort this without having to take it in to a store?
I was faced with this problem before and looked everywhere and couldnt find a fix. This was a while ago. So I dont remember what I did to clear it. I was cleaning off the screen and touched the home button as I was wiping it off and the problem began again.... I just came across your comment because all the others failed. I pressed the home button 3 times quickly and the blue lines stopped scrolling. In addition, I went over the accessibility and I turned off the "Universal Switch" option as much as the option allows. I hate this function. I do not use it or need it (for my needs). I hope I can remember what to do next time this happens. I swore to myself I would remember last time, but apparently that wasnt a guarantee. This time, I will write it down and put is somewhere I know I will find it next time I see these nefarious blue lines scrolling. Hopefully I wont see it again since I disabled it more than it was to begin with. Thank you ever so for commenting. You saved me a lot of frustration!
great fix
CarlyCraig said:
hit home button 3 times
Click to expand...
Click to collapse
thank you for posting the only sollution that works.
Hello,
I have activated Universal Switch option Screen - Volume Increase button on S6 Edge upgraded version of android 6.0 and but it messup everything.. I am now unable to access any feature on screen.. none of the button are working on screen.
I have also tried rebooting it with the option suggested by you.. but I am locked due to password protected... My device not asked to disable Universal Switch option after reboot as well..
Please help, how to get this Function Disable, without affecting my data as I do not wish to loss any of my data..
So what the heck is that scanning blue line option supposed to do?
My home button is not working, now tell me how do i get out this situation
Akki167 said:
My home button is not working, now tell me how do i get out this situation
Click to expand...
Click to collapse
Have you tried pressing it rapidly three times?
It happens to me too, have you solved this problem? Please tell me what to do im freaking out right now
me too @Alifanasya
same issue
it works with OTG cable + mouse