Related
It's my firs post, so forgive me if thread is in wrong place, and replace it if you can. Thank you.
So, ok...I've got N-5100 with original soft: 4.1.2 Android version, N5100XXBMC89 modem, XXBMD1 version number.
There was an update do 4.2.2 but not in my country (Poland). I know that I can make manual update, but my question is: is the 3g will be working? From which country should I choose an update?
Will be glad for ANY help.
Thank You.
Marcingam said:
It's my firs post, so forgive me if thread is in wrong place, and replace it if you can. Thank you.
So, ok...I've got N-5100 with original soft: 4.1.2 Android version, N5100XXBMC89 modem, XXBMD1 version number.
There was an update do 4.2.2 but not in my country (Poland). I know that I can make manual update, but my question is: is the 3g will be working? From which country should I choose an update?
Will be glad for ANY help.
Thank You.
Click to expand...
Click to collapse
Are you familiar with how to root the N-5100?
flymacs said:
Are you familiar with how to root the N-5100?
Click to expand...
Click to collapse
Yes, I can do that through Odin.
Marcingam said:
Yes, I can do that through Odin.
Click to expand...
Click to collapse
Ok, my N5100 had the same modem/software as yours. I rooted with CF-Auto-Root: http://forum.xda-developers.com/showthread.php?t=2291839. Next, using odin, I flashed PhilZ Touch: http://forum.xda-developers.com/showthread.php?t=2552657 to get a custom recovery. Last, using PhilZ, I flashed this rom: http://forum.xda-developers.com/showthread.php?t=2407752.
Everything went very smooth. It was the easiest root and upgrade I have done. I ended up with stock-rooted 4.2.2. 3g works great on AT&T and phone reception is also very good.
Read the instructions in each of the forums and be careful that you download the correct files. For example, PhilZ has a file for the N5100 as well as the N5110.
Hope this helps.
flymacs said:
Ok, my N5100 had the same modem/software as yours. I rooted with CF-Auto-Root: http://forum.xda-developers.com/showthread.php?t=2291839. Next, using odin, I flashed PhilZ Touch: http://forum.xda-developers.com/showthread.php?t=2552657 to get a custom recovery. Last, using PhilZ, I flashed this rom: http://forum.xda-developers.com/showthread.php?t=2407752.
Everything went very smooth. It was the easiest root and upgrade I have done. I ended up with stock-rooted 4.2.2. 3g works great on AT&T and phone reception is also very good.
Read the instructions in each of the forums and be careful that you download the correct files. For example, PhilZ has a file for the N5100 as well as the N5110.
Hope this helps.
Click to expand...
Click to collapse
Yeah, I'm just worried about this carrier stuff. My question is if the German version of software will be working with Polish 3g operators. But tomorrow is Sunday, I will have time to try your way. TY.
Marcingam said:
Yeah, I'm just worried about this carrier stuff. My question is if the German version of software will be working with Polish 3g operators. But tomorrow is Sunday, I will have time to try your way. TY.
Click to expand...
Click to collapse
I haven't had a need to use them, but there is a modem thread in case you encounter problems with the German Rom: http://forum.xda-developers.com/showthread.php?t=2523622
flymacs said:
I haven't had a need to use them, but there is a modem thread in case you encounter problems with the German Rom: http://forum.xda-developers.com/showthread.php?t=2523622
Click to expand...
Click to collapse
Thank you a lot! Everything seems to be OK.
Can Anyone tell me the latest Telus modem/radio and where to find a flashable zip? Since they did the 4.3 update signal has been ish.
G
[email protected] said:
Can Anyone tell me the latest Telus modem/radio and where to find a flashable zip? Since they did the 4.3 update signal has been ish.
G
Click to expand...
Click to collapse
Here is the modem I'm using on my Note 2 running Ezkat 2.0 (4.4.2) on Telus. Just flash in recovery.
https://dl.dropboxusercontent.com/u/30547017/ROGERS_MODEM_I317MVLBMA3.zip
Awsome
just_visiting said:
Here is the modem I'm using on my Note 2 running Ezkat 2.0 (4.4.2) on Telus. Just flash in recovery.
https://dl.dropboxusercontent.com/u/30547017/ROGERS_MODEM_I317MVLBMA3.zip
Click to expand...
Click to collapse
Thanks a bunch. Will try it later when phone charges.
G
[email protected] said:
Thanks a bunch. Will try it later when phone charges.
G
Click to expand...
Click to collapse
Unfortunately this is a Rogers modem and doesn't work with Skynote Air with Devils Kernal. Once flashed gets bootloop at start screen. The quest continues.
G
[email protected] said:
Unfortunately this is a Rogers modem and doesn't work with Skynote Air with Devils Kernal. Once flashed gets bootloop at start screen. The quest continues.
G
Click to expand...
Click to collapse
What does your current modem/baseband show? I'm running ezkat and flashed the rogers modem no problem. I'm with Koodo in Canada i317m
If you download the latest Stock ROM from sammobile you should be able to extract the modem and flash it using odin. source
I have the stock koodo rom and was able to do the above succesfully to test just now.
snowin said:
If you download the latest Stock ROM from sammobile you should be able to extract the modem and flash it using odin. source
I have the stock koodo rom and was able to do the above succesfully to test just now.
Click to expand...
Click to collapse
My current modem is i1317MVLUCMK5. I'll try the above method.
G
[email protected] said:
Unfortunately this is a Rogers modem and doesn't work with Skynote Air with Devils Kernal. Once flashed gets bootloop at start screen. The quest continues.
G
Click to expand...
Click to collapse
Perhaps it's time for a new rom? Rogers, Telus, Bell, Fido, etc... all use the exact same modem. I finally have all my roms and mods all linked in my sig. I also flashed the MK5 just right now. Everything seems to be working fine on my end.
Edit: So this morning when I started to make a few phone calls my phone would just reboot itself and be stuck in a bootloop. Flashed the BMA3 modem and everything is back to norm.
just_visiting said:
Perhaps it's time for a new rom? Rogers, Telus, Bell, Fido, etc... all use the exact same modem. I finally have all my roms and mods all linked in my sig. I also flashed the MK5 just right now. Everything seems to be working fine on my end.
Edit: So this morning when I started to make a few phone calls my phone would just reboot itself and be stuck in a bootloop. Flashed the BMA3 modem and everything is back to norm.
Click to expand...
Click to collapse
Nice advice. Gonna try a different ROM. Your help is appreciated.
G
[email protected] said:
Nice advice. Gonna try a different ROM. Your help is appreciated.
G
Click to expand...
Click to collapse
The Canadian stock 4.4.2 firmware came out today. I'd recommend you Odin the stock 4.4.2 Telus firmware then rooting it again. This way you get the lastest Telus Modem and 4.4.2 booloader. Latest Telus Modem is in my sig. You can try it. Works great for me on eZKAT 2.0 rom.
just_visiting said:
The Canadian stock 4.4.2 firmware came out today. I'd recommend you Odin the stock 4.4.2 Telus firmware then rooting it again. This way you get the lastest Telus Modem and 4.4.2 booloader. Latest Telus Modem is in my sig. You can try it. Works great for me on eZKAT 2.0 rom.
Click to expand...
Click to collapse
Do you know if all the Canadian carriers use the same modem? I am on Bell Mobility and was thinking of downloading the new image today to extract the modem. I just downloaded your Telus KK one but am hesitant to flash it..
just_visiting said:
The Canadian stock 4.4.2 firmware came out today. I'd recommend you Odin the stock 4.4.2 Telus firmware then rooting it again. This way you get the lastest Telus Modem and 4.4.2 booloader. Latest Telus Modem is in my sig. You can try it. Works great for me on eZKAT 2.0 rom.
Click to expand...
Click to collapse
Quick question. Can i just flash the zip you so graciously zipped up through TWRP? I'm still on 4.1.2 Bootloader.
G
crutzulee said:
Do you know if all the Canadian carriers use the same modem? I am on Bell Mobility and was thinking of downloading the new image today to extract the modem. I just downloaded your Telus KK one but am hesitant to flash it..
Click to expand...
Click to collapse
Yes, most Canadian carriers (Telus, Bell, and Rogers/Fido) uses the same modem. Not sure about Wind and Mobilicity though.
---------- Post added at 05:22 PM ---------- Previous post was at 05:20 PM ----------
[email protected] said:
Quick question. Can i just flash the zip you so graciously zipped up through TWRP? I'm still on 4.1.2 Bootloader.
G
Click to expand...
Click to collapse
Not sure about 4.1.2. Do yourself a favor and spend 30mins and get it done right.
just_visiting said:
Yes, most Canadian carriers (Telus, Bell, and Rogers/Fido) uses the same modem. Not sure about Wind and Mobilicity though.
---------- Post added at 05:22 PM ---------- Previous post was at 05:20 PM ----------
Thanks, backing up now and will give your provided modem a go...will report back on Bell Mobility...
Click to expand...
Click to collapse
Cool. Make a few phone calls and see your phone re-boots or not. Maybe do a speedtest.
Edit: I've updated my sig more specifically to avoid carrier confusion.
just_visiting said:
Yes, most Canadian carriers (Telus, Bell, and Rogers/Fido) uses the same modem. Not sure about Wind and Mobilicity though.
---------- Post added at 05:22 PM ---------- Previous post was at 05:20 PM ----------
Not sure about 4.1.2. Do yourself a favor and spend 30mins and get it done right.
Click to expand...
Click to collapse
OK.. I flashed the zip in your sig. Was a bit better, but still having reception issues. Does the zip include firmware update? If not do you think flashing this would help? I'm a bit out of practice so please gimmi the steps to update my bootloader. And is there a advantage to doing this?
G
snowin said:
What does your current modem/baseband show? I'm running ezkat and flashed the rogers modem no problem. I'm with Koodo in Canada i317m
Click to expand...
Click to collapse
Im running dn3 v5 4.4.2 with koodo note 2 and im getting hspa+ and 4g but my download speed is around 8 and upload around 4 think I could flash this modem with the rom im running?
note2root said:
Im running dn3 v5 4.4.2 with koodo note 2 and im getting hspa+ and 4g but my download speed is around 8 and upload around 4 think I could flash this modem with the rom im running?
Click to expand...
Click to collapse
I took a screen shot of my modem im sure its updated to newest ill try and post the s reen shot
Is this current firmware rootable or do I need to downgrade via Odin to e6?
RealityFails said:
Is this current firmware rootable or do I need to downgrade via Odin to e6?
Click to expand...
Click to collapse
Just to be clear, this is the T-Mobile thread and the most recent version is NF4 and it is rootable. Not sure if the version you're asking for was a typo.
louforgiveno said:
Just to be clear, this is the T-Mobile thread and the most recent version is NF4 and it is rootable. Not sure if the version you're asking for was a typo.
Click to expand...
Click to collapse
I know this is the T-Mobile section, I have a T-Mobile note 3. But my firmware is on f6 and not f4 and when I Googled it nothing came up. Here's a screenshot.
louforgiveno said:
Just to be clear, this is the T-Mobile thread and the most recent version is NF4 and it is rootable. Not sure if the version you're asking for was a typo.
Click to expand...
Click to collapse
I know this is the T-Mobile section, I have a T-Mobile note 3. But my firmware is on f6 and not f4 and when I Googled it nothing came up. Here's a screenshot.
Looks like a S5 Rom and S5 baseband
louforgiveno said:
Looks like a S5 Rom and S5 baseband
Click to expand...
Click to collapse
Is this good or bad?
Did you just get the phone?
RealityFails said:
Is this good or bad?
Click to expand...
Click to collapse
I really don't know, it could just be a side effect of a custom rom. Anyway lets assume you have already tripped knox, you should be able to run NF4 full firmware and then root with cf autoroot. I'm currently on NF4 knox tripped root and custom recovery
louforgiveno said:
I really don't know, it could just be a side effect of a custom rom. Anyway lets assume you have already tripped knox, you should be able to run NF4 full firmware and then root with cf autoroot. I'm currently on NF4 knox tripped root and custom recovery
Click to expand...
Click to collapse
But my note 3 is on stock. Touchwiz and everything
What can I do to check if it's a custom rom?
louforgiveno said:
Looks like a S5 Rom and S5 baseband
Click to expand...
Click to collapse
How do you figure that? The version numbering doesn't match the S5.
Kernel and baseband info clearly state they are for the N900T.
The version number and time stamp look like a new release (Aug 15) for the T-Mobile Note 3.
So am I the only one on this firmware? Can I still downgrade to e6 root
I googled it - NF6 is definitely an S5 firmware as louforgiveno stated.
Vegasden said:
I googled it - NF6 is definitely an S5 firmware as louforgiveno stated.
Click to expand...
Click to collapse
Yeah from what i could gather it appears that way, however I'm interested in the ".dm" at the end of the build number in his screen shot. Not sure what that is??
Vegasden said:
I googled it - NF6 is definitely an S5 firmware as louforgiveno stated.
Click to expand...
Click to collapse
Wow, in the q&a thread there's a user who posted a screenshot with NF9 and it also has the .dm in the build number. All these updates...really not used to it....not sure how i feel about that....?
http://forum.xda-developers.com/showthread.php?t=2848151
Any chance of a downgrade/root? Or should I wait it out.
RealityFails said:
Is this current firmware rootable or do I need to downgrade via Odin to e6?
Click to expand...
Click to collapse
Where are you seeing NF6 for the TMO Note 3?
It's in the thread I attached a screen shot
http://m.theepochtimes.com/n3/90535...lte-get-firmware-no-android-4-4-4-kitkat-yet/ found that. Maybe that's the update I got a few days ago
RealityFails said:
http://m.theepochtimes.com/n3/90535...lte-get-firmware-no-android-4-4-4-kitkat-yet/ found that. Maybe that's the update I got a few days ago
Click to expand...
Click to collapse
I have all the firmwares, and stock roms if anyone needs it, look on my signature..
What is the last modem for m919 / Android 4.4.4 (I am using now old bootloader MDL with NB4 modem) ?
http://forum.xda-developers.com/showpost.php?p=55373341&postcount=22
xperia_88 said:
What is the last modem for m919 / Android 4.4.4 (I am using now old bootloader MDL with NB4 modem) ?
Click to expand...
Click to collapse
mentioned this regarding the new modem that just came out days ago:
Unless someone can confirm more radio/modem changes/improvements already claimed by T-Mobile regarding this M919UVUFNH7 update, there should be no expected improvements aside from the new in-flight wifi.
Am I right people?
So if you are not wanting to use wifi on an airplane in the near future, there isn't really any reason to flash the new modem binaries. Unless you just like the hassle of Odin flash, don't reboot, pull your battery, stick out your tongue and hold your head just right, -repeat
ShinySide said:
http://forum.xda-developers.com/showpost.php?p=55373341&postcount=22
Click to expand...
Click to collapse
Thank you!
hello,I want to F936U flash F936u1 Firmware,how can I do?
I'm absolutely sure that you can do that.
I have tried it yesterday and successfully changed the model.
But, you can't flash it via ordinary Odin. You have use a patched Odin which can be found in XDA and flash the u1 firmware in it.
1992595365 said:
我绝对确定你可以做到这一点。
我昨天试了一下，成功换了型号。
但是，你不能通过普通的 Odin 来刷机。您使用了一个可以在 XDA 中找到的修补过的 Odin，并在其中刷新 u1 固件。
Click to expand...
Click to collapse
thank you，i want to try
I bought TMobile. Can I use it on Verizon after CSC flash???
Can we also flash the U1 firmware to Canadian fold 4 f936w model?
zeeshee said:
Can we also flash the U1 firmware to Canadian fold 4 f936w model?
Click to expand...
Click to collapse
Should be able to:
Download link for One UI 5 Beta 1 2 3 and 4 Android 13 Guide+Links BETA FINISHED
THE BETA PROGRAM HAS FINISHED FOR ONE UI 5 ANDROID 13 THANKS FOR TAKING PART FINAL UPDATE WILL BE RELEASED WITHIN THE NEXT COUPLE OF WEEKS IF YOU WANT TO SIDELOAD IT NOW USE ODIN And here we are the One ui 5 Beta Android 13 for the Z FOLD 4...
forum.xda-developers.com
I'll probably be trying this myself in the next few days. Will update if I do.
Let me know once you do it. Thx.
Ok I just flashed from U1 to a W ROM, specifically F936U1UES1AVJ1 (Android 12, XAA) to F936WVLU1BVK3 (13, XAC), and it all seems like it works fine. I'll update if I run into anything in the next few days.
Just a note that although it doesn't matter, it was originally a SM-F936U (updated to U1 then W)
aleunge said:
Ok I just flashed from U1 to a W ROM, specifically F936U1UES1AVJ1 (Android 12, XAA) to F936WVLU1BVK3 (13, XAC), and it all seems like it works fine. I'll update if I run into anything in the next few days.
Just a note that although it doesn't matter, it was originally a SM-F936U (updated to U1 then W)
Click to expand...
Click to collapse
My kind sir would you mind me asking what would be your reason of flashing from 936u to 936w to 946u1 and who would be your carrier and did you expirence any network issues???
Thanks in advance
shorty9210 said:
My kind sir would you mind me asking what would be your reason of flashing from 936u to 936w to 946u1 and who would be your carrier and did you expirence any network issues???
Thanks in advance
Click to expand...
Click to collapse
Hey shorty I bought it used with U firmware and just to be safe to make sure it's stock and the fact U (and W) versions didn't get much updates, I flashed with the U1. Android 13 was released first for unbranded Canada XAC and since I'm actually using on Canadian networks, might as well. So far ok. No issues to report.
aleunge said:
Hey shorty I bought it used with U firmware and just to be safe to make sure it's stock and the fact U (and W) versions didn't get much updates, I flashed with the U1. Android 13 was released first for unbranded Canada XAC and since I'm actually using on Canadian networks, might as well. So far ok. No issues to report.
Click to expand...
Click to collapse
Well that's good to hear that makes sense then, so you are using it on a Canadian carrier??
I only as Cuz I have AT&T and I'm trying to figure out why mine has a completely different firmware then what sammobile shows what the at&t firmware is and my zfold4 is saying it's on the current firmware witch clearly tells me it's not!! oh does yours show the oem unlock btw
At&t z fold 4 SM-F936U or SM-F936U1
Hello all now I'm just confused so my zFold4 says it's the SM-F936U and I did the updates sense i figured if the US varients are not rootable as of now im just going to update it to the 13 update and after it up dated twice last night and it...
forum.xda-developers.com
aleunge said:
Ok I just flashed from U1 to a W ROM, specifically F936U1UES1AVJ1 (Android 12, XAA) to F936WVLU1BVK3 (13, XAC), and it all seems like it works fine. I'll update if I run into anything in the next few days.
Just a note that although it doesn't matter, it was originally a SM-F936U (updated to U1 then W)
Click to expand...
Click to collapse
Hey I have a question, in order to update to the W XAC, did you have to delete user data? Or were you able to update keeping your data. Thanks
shorty9210 said:
Well that's good to hear that makes sense then, so you are using it on a Canadian carrier??
I only as Cuz I have AT&T and I'm trying to figure out why mine has a completely different firmware then what sammobile shows what the at&t firmware is and my zfold4 is saying it's on the current firmware witch clearly tells me it's not!! oh does yours show the oem unlock btw
At&t z fold 4 SM-F936U or SM-F936U1
Hello all now I'm just confused so my zFold4 says it's the SM-F936U and I did the updates sense i figured if the US varients are not rootable as of now im just going to update it to the 13 update and after it up dated twice last night and it...
forum.xda-developers.com
Click to expand...
Click to collapse
Hey I'm not too sure if you mean this, but yes mine is factory unlocked (actually a dev/demo device). And yes on Canadian network. You can always flash with the newest ATT ROM if yours is from ATT but hasn't gotten updates. Just make sure it indeed is the right model.
andres.soler.s said:
Hey I have a question, in order to update to the W XAC, did you have to delete user data? Or were you able to update keeping your data. Thanks
Click to expand...
Click to collapse
I did not keep user data so not sure if you can or should. But I think if you're switching model/CSC, the general consensus is to do a clean flash. If you just want to enable Canadian bands that are disabled on a US device, you can search up a way to do so I think using engineering mode.
aleunge said:
Hey I'm not too sure if you mean this, but yes mine is factory unlocked (actually a dev/demo device). And yes on Canadian network. You can always flash with the newest ATT ROM if yours is from ATT but hasn't gotten updates. Just make sure it indeed is the right model.
I did not keep user data so not sure if you can or should. But I think if you're switching model/CSC, the general consensus is to do a clean flash. If you just want to enable Canadian bands that are disabled on a US device, you can search up a way to do so I think using engineering mode.
Click to expand...
Click to collapse
Okie dokie sounds good I'm just looking into it and noticed all varients have a similar codes and my pituitary one has the firmware matching the MetroPCS firmware but the only firmware that I have found for at&t comes up as the smf936u1 at least on sammobile I suppose I'll have to check other firmware sites thanks for the reply hope you are having a wonderful day
shorty9210 said:
Okie dokie sounds good I'm just looking into it and noticed all varients have a similar codes and my pituitary one has the firmware matching the MetroPCS firmware but the only firmware that I have found for at&t comes up as the smf936u1 at least on sammobile I suppose I'll have to check other firmware sites thanks for the reply hope you are having a wonderful day
Click to expand...
Click to collapse
If you're on any of the U or U1 firmware, I think you can safely flash to any other U/U1 without any issues. I usually cross reference with samfw and Frija too. Have a wonderful day too friend.
Would this enable Sim for phones without it? The SM-F9360 does not have esim support, could be software, I hope.
Can i go from U to W and then root? Or not possible?
Can I go from ATT and flash TMO variant if the model number is the same? SM-F936U? The phone is unlocked FYI. [email protected]