Can anyone give me some ideas what's going wrong with my phone?
I flashed shpongle rom 3-4 times now with full wipe. After 5 minutes of use I'm seeing crazy lags which I think is being caused by this type of situation:
[email protected]:/ $ free
total used free shared buffers
Mem: 371980 367248 4732 0 272
-/+ buffers: 366976 5004
Swap: 131064 110348 20716
There doesn't seem to be any memory management going on at all. I'm using 521 shpongle and 3.0.16 hellboy kernel. No mods or tweaks. Should I reflash the kernel maybe?
Thanks!!!
leekohlbradley said:
Can anyone give me some ideas what's going wrong with my phone?
I flashed shpongle rom 3-4 times now with full wipe. After 5 minutes of use I'm seeing crazy lags which I think is being caused by this type of situation:
[email protected]:/ $ free
total used free shared buffers
Mem: 371980 367248 4732 0 272
-/+ buffers: 366976 5004
Swap: 131064 110348 20716
There doesn't seem to be any memory management going on at all. I'm using 521 shpongle and 3.0.16 hellboy kernel. No mods or tweaks. Should I reflash the kernel maybe?
Thanks!!!
Click to expand...
Click to collapse
Hi
If your phone lags, try to flash the last Shpongle (with Halo), flash IRONMAN Kernel and the FlyOn Mod V4. I use them and my phone is good now. I/O Scheduler to ROW and CPU on Smartmax. :good:
Bye
Thanks, hopefully I'll get a chance to flash a new kernel over the holiday weekend to see if it makes a difference.
Not a fan of halo so I won't try that for the moment.
Really annoyed with this phone since I came from HTC Legend which despite being 4 years old still runs cm10 very respectably. >_<
leekohlbradley said:
Thanks, hopefully I'll get a chance to flash a new kernel over the holiday weekend to see if it makes a difference.
Not a fan of halo so I won't try that for the moment.
Really annoyed with this phone since I came from HTC Legend which despite being 4 years old still runs cm10 very respectably. >_<
Click to expand...
Click to collapse
I hate Halo too. But, even if you have the button, you disable Halo and dont use. This build is better than 521 I think and with IRONMAN and FlyOn Mod phone lags less.
I had a HTC Desire before HoV and I see difference but now HoV is good with this ROM, Kernel and mod.
I'm using old builds w/o halo and w/o mods and look at this score? Impossible I don't think so
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wysłane z mojego One V przy użyciu Tapatalka
Minto107 said:
I'm using old builds w/o halo and w/o mods and look at this score? Impossible I don't think so
Click to expand...
Click to collapse
I don't care about free memory, only about multitasking and smoothness. I'm actually back on 631 and have turbo boost and crossbreeder. So far it seems ok. My only trouble now is system ui FCing every time halo gets a notification until I close/reopen halo.
I also changed IO to sio and switched to smartassv2.
With turbo boost of course I do have a pile of swap free all the time...
Swaps? I don't like them. But I see One V has really bad GPU. GPU is too slow
Sent from my One V using Tapatalk
Minto107 said:
Swaps? I don't like them. But I see One V has really bad GPU. GPU is too slow
Sent from my One V using Tapatalk
Click to expand...
Click to collapse
I wonder what shpongle would do if I turned off all swaps maybe I'll try tomorrow for a laugh
Been swap free for almost 24 hours...
It's... Pretty good! Better, even! Maybe 4.2.2 doesn't like swaps? Memory seems to get managed a lot better now We'll see how long it stays happy haha
leekohlbradley said:
Been swap free for almost 24 hours...
It's... Pretty good! Better, even! Maybe 4.2.2 doesn't like swaps? Memory seems to get managed a lot better now We'll see how long it stays happy haha
Click to expand...
Click to collapse
How you disable swap on Shpongle ?
Thanks
kzimir2 said:
How you disable swap on Shpongle ?
Thanks
Click to expand...
Click to collapse
Step one, make a nandroid backup.
2. Use root browser, explorer, whatever, to go to system/etc/init.d
3. There's a file there called 01.swap. Change its permissions to 644.
4. Reboot.
leekohlbradley said:
Step one, make a nandroid backup.
2. Use root browser, explorer, whatever, to go to system/etc/init.d
3. There's a file there called 01.swap. Change its permissions to 644.
4. Reboot.
Click to expand...
Click to collapse
Thanks !
I dont see difference ^^ but it works good
kzimir2 said:
Thanks !
I dont see difference ^^ but it works good
Click to expand...
Click to collapse
Dude, there's a thanks button. Why don't you hit it instead of say it?
Related
Those who like to overclock, I have found that 1.4ghz with VSEL at 82 (yeah omg) works good on our Bravos.
It runs stable, no reboots/extreme heat/weird problems and have been running for an hour. So feel free to run between 1 to 1.4ghz, and if you have an extra Bravo, or you're extremely brave, try 1.5
BTW, this is what it looks like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can also try:
[email protected]
[email protected]
[email protected]
I take NO responsibility for broken phones.
Have fun
Excellent, I'd like to see my phone running like that!!
Where do I have to modify those settings? 2nd init defy recovery?
Im new at modding bravo
josuearisty said:
Excellent, I'd like to see my phone running like that!!
Where do I have to modify those settings? 2nd init defy recovery?
Im new at modding bravo
Click to expand...
Click to collapse
Yes, when your phone, wait for the blue light and press volume down. Then go to CPU settings.
MINE LOOKS LIKE THIS:
Status: [enable]
load all modules: [enable]
Scaling: [Ondemand]
*clk1 [600]
*clk2 [1000]
*clk3 [1400]
-------------------------
*Vse11: [38]
*Vse12: [58]
*Vse13: [82]
But idk I ran it for a while and it got up to 122f. So I would stick with 1.1, 1.2, and maybe 1.3 ghz for normal use. 1.4 if you feel like seeing true power
Ok, I'll try it later when I change the phone digitizer that is broken!
PD: very low activity here in the forum, where is everybody? is that this phone is not very used? or is there another site for motorola bravo?
Thanks for the answer!!
josuearisty said:
Ok, I'll try it later when I change the phone digitizer that is broken!
PD: very low activity here in the forum, where is everybody? is that this phone is not very used? or is there another site for motorola bravo?
Thanks for the answer!!
Click to expand...
Click to collapse
Yes, extremely low activity. And any other website (android central, modmymobile, ect) has way lower activity than the xda Bravo thread.
Anyways, just hang out on the Defy forums, pretty much everything there will work on the Bravo (ROMs work, you just have to port them over)
what are the settings for overclocking to, say, 1.2?
BravoMotorola said:
Yes, extremely low activity. And any other website (android central, modmymobile, ect) has way lower activity than the xda Bravo thread.
Anyways, just hang out on the Defy forums, pretty much everything there will work on the Bravo (ROMs work, you just have to port them over)
Click to expand...
Click to collapse
Yes, XDA has the most high activity for bravo, I come from modmymobile and I have a cliq XT and a Backflip also but Bravo is the best of them all, I really like the speed, the screen, resolution, camera is not the best but does a great job taking pictures and recording videos in stock froyo, I hope you guys someday make it work in gingerbread!
PORT ROMS: Thats what I dont know and I would like to know, is it very difficult? is there a way to do it in windows? Or I just have to download a defy rom and flash them in recovery without changing anything?
I dont know how similar are our roms with defy roms and I'd like to know if defy roms can brake my phone if I flash them as they are. (I think thats not a problem becuase we can restore it with RSD Lite )
There are many questions I'd like you please to take your time to answer. I'd like to know everything because have always been wanting to be a developer of any phone, but I felt to lazy
Thanks!!!
I just bought a Motorola Atrix 4G to upgrade my phone/service so I'll probably test this out with my Bravo.
josuearisty said:
Yes, XDA has the most high activity for bravo, I come from modmymobile and I have a cliq XT and a Backflip also but Bravo is the best of them all, I really like the speed, the screen, resolution, camera is not the best but does a great job taking pictures and recording videos in stock froyo, I hope you guys someday make it work in gingerbread!
PORT ROMS: Thats what I dont know and I would like to know, is it very difficult? is there a way to do it in windows? Or I just have to download a defy rom and flash them in recovery without changing anything?
I dont know how similar are our roms with defy roms and I'd like to know if defy roms can brake my phone if I flash them as they are. (I think thats not a problem becuase we can restore it with RSD Lite )
There are many questions I'd like you please to take your time to answer. I'd like to know everything because have always been wanting to be a developer of any phone, but I felt to lazy
Thanks!!!
Click to expand...
Click to collapse
Sent from my MB520 using XDA App
Read through dev sections and get much answers
I usually do how to port in miui thread
Cm7 and miui can almost direct port because they use froyo kernel..
Other roms like ginger blur are not easy as they use ginger bread kernel
Sent from my MB520 using XDA App
TIME2SHINE said:
what are the settings for overclocking to, say, 1.2?
Click to expand...
Click to collapse
for bandroidx overclock rom when i do 1.2 ghz i do 63 vsel or 62 and its stable. you just drain the battery faster my fav setting is 1ghz and leave it stock vsel and it it just purs
Tried 1.4G out but with 85. see if I can post the screenshot
You can also make an init script that controls vsel on demand up to 1.4
Sent from my MB520 using XDA App
rdannar said:
You can also make an init script that controls vsel on demand up to 1.4
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
Do you think you could help me getting more levels? There's only three all the way to 1.4ghz, I had mine at 600mhz, 1000mhz then 1.4 ghz. Is there a way to make more steps in between? And I don't need to know now, I just sent in my Bravo because it had 2 dead pixels
@BravoMotorola
Hey man, I think you can help me with modifing a framework from gingerblur, I would like to add some languages if there is a way and its possible.
Are you working also in making photo camera works? Thats the only thing we are missing after all.
TOUCHSCREEN FIX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sense only, not for cm7
Remember that I made a GB2.3.3 Gaming ROM cause GB2.3.5 have multitouch issue in games eg. Nova, Sandstorm it's like playing on a keyboard with a broken mouse, whenever you try to look right thumb, while left thumb is still on screen it will look only once then unresponsive.
We'll if your still on m1ndh4x8r roms or other GB2.3.5 roms, and likes to play gameloft games without problems, I have made a fix in the kernel that would remove this problem, and fix two thumbs simultaneous use, and not worry about hitting your enemy while running.
Download
Code:
http://www.mediafire.com/?dhznbecb42u2k9d
V2 update
Add IO schedulers
Add Governors
V3 update
Clean and recompiled
No wipe, just flash it.
Also compatible with Gaming ROM
Please hit thanks if it works for you.
im using your gaming rom
but as same at the m1ndh4x8r, my WFS still freeze at the lock screen, it totally not response. It very hard to unclock the phone. And the same issue when i try to end a call.
the important thing is after unlock, it work normally.
So, i dont know its a hardware problem or because the ROM?
any way to fix that? Thank
Sorry for bad english
For your information it is not related to kernel or rom, it is your digitizer that is broke
search google "wildfire s digitizer".
Also I don't have that problem in any rom or my rom.
better luck next time
OK, everybody it's ready for download. it's final version of fix.
I'll test this out ! Thanks for sharing.
(I'll edit here to report)
In stock firmware 2.14.401.1 cyclic rebooting. Or, after turning the device completely freezes. (no answer on the screen or keyboard)
P.s. S-OFF, CWM
GSBS said:
im using your gaming rom
but as same at the m1ndh4x8r, my WFS still freeze at the lock screen, it totally not response. It very hard to unclock the phone. And the same issue when i try to end a call.
the important thing is after unlock, it work normally.
So, i dont know its a hardware problem or because the ROM?
any way to fix that? Thank
Sorry for bad english
Click to expand...
Click to collapse
well. i had this problem, too. on one earlier rom (dont know). But reinstall solved this problem
some phones dont support overclock thats why it freezes. sorry.
Hi i have a problem with this kernel not with the fix itself but after flashing this kernel each time that i try to turn the WiFi it says error and does not connect
Can you make a fix?
This just doesn't work at all when I tried it with CM7. It essentially broke the touchscreen - wasn't working at all. Artefacts were also coming up on the screen
cm7 is has a different kernel from sense. this is for sense only. also if you have wifi issues the zip wasnt flashed right. flash it 2x to be sure it overwrited the files.
Well, not editing since there were quite a number of replies.
It works much better than before, thanks ! It used to lag like as fu*k when unlocking the screen, and sometimes just randomly. Now it still has glitches and some slow times, but nothing compared to before. Nice job !
F*ck this sh*t "fix"/. Installed it 10 times but the same.. doesn't boot. My phone was with 2.1 m1ndh4xer and it was overclocked and was very good...
(IwaN) said:
F*ck this sh*t "fix"/. Installed it 10 times but the same.. doesn't boot. My phone was with 2.1 m1ndh4xer and it was overclocked and was very good...
Click to expand...
Click to collapse
If it was so good, why'd you do it ? Anyway, you just have to flash the kernel back from the ROM you were using...
einstein.frat said:
some phones dont support overclock thats why it freezes. sorry.
Click to expand...
Click to collapse
Thanks a lot for this! Flashed this kernel after doing a nandroid backup. With your latest GB2.3.5 stable / premium features rom it works fine, showing a lot more governors and i/o schedulers to choose from.
It seems that with this kernel I need to reduce OC one step. It seems to be more hardware demanding...
Had to reduce from 806 to 787 MHz in order to complete Antutu latest version benchmark. If I don't reduce OC, Antutu freezes at 7% testing (cpu).
Quadrant doesn't freeze phone and doesn't force me to remove battery...
Tomorrow I will test the gaming abilities of this kernel and will post results as soon as I can.
Thanks again for your constant work.
Edit: gave up using this kernel due to cpu instability.
Sent from my HTC Wildfire S A510e using xda premium
comaX13 said:
If it was so good, why'd you do it ? Anyway, you just have to flash the kernel back from the ROM you were using...
Click to expand...
Click to collapse
Because of the multitouch in AirHockey game. It's wrote that it fixes it.. but nope.. And after flashing the kernel back all my data was deleted. However I've already reflashed mindhexer's ROM and now I'm ok
I tested this, and the multitouch works great, and the overall touchscreen experience is much better. However, this kernel's underclock is higher than my old one (m1ndh4x8r's) and my device freezes randomly. Also, there is a bug where the sound goes to mute and you can't bring the volume back up until the phone lets you do it (15 minutes - half an hour later). Not worth a better score in Fruit Ninja, in my opinion, but if you can fix these bugs it'd be a great replacement kernel
does it have overclock to 825mhz
really fix my multi-touch issue cool and i love it
Can somebody upload this somewhere else?
Hello family, I've been recently getting a lot of mail on how to successfully overclock a GPU .So figured i would make this thread for you,,And we can all help one another on questions and so forth..
Stock Max frequency is 533
This will bump it to 733 frequency.(800 is max)
First you have to be on a ROM that has (init.d support)
Second a kernel that supports overclocking CPU/GPU like (Perseus O/C Kernel)
Next,using root explorer app navigate to ETC/INIT.D folder put these 733 file into the init.d folder
Now am using ROM TOOLBOX PRO
Go to TOOLS section and go to SCRIPTER...press the + toggle and find where you placed the 733 tweak in the init.d folder and import it.
When it script pops up, press it and RUN SCRIPT once done press it again and SET AS BOOT..
reboot and you should see a notification showing it ran the script,,easy as that..
OPEN the ZIP file and take the gputweaks733max out,,this is what you will use.
PLease hit thanks if this helped..
(thanks to truth77,dafox,bluntman420.for the help)
Excellent been waiting for instructions on this! Will try and report back. Thank you!
EDIT: Worked as described! Thanks Wish777!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
turilo said:
Excellent been waiting for instructions on this! Will try and report back. Thank you!
EDIT: Worked as described! Thanks Wish777!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Awesome..pretty easy with a guide huh..Lol now watch your scores on benchmarks..not saying that benchmarks are accurate but it will def show improvements.
Cool thanks I got this working...
what about undervolting the gpu?
Thank you.I have had a little confusion about this and you made it clear for us.
Sent from my SGH-I317M using xda premium
Alternative method...
Open the extracted file with smanager (free, playstore) click the icon above su, boot, then click save, then run, easy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i'm gonna wait until he releases an APP that does this cuz i don't know if my stock rom has init.d support, and scripts are too restrictive and cumbersome
Posted on wrong thread
yes they will not match exactly unless thats a valid step, it picks the closest that matches, when I was configuring it I just knew I needed to step up on level higher beccause it had just crashed on a lower level, so I bumped it by 14 or whatever so that it would pick the next step (which I didnt know offhand)
also.. im pretty sure by those values you ran my script not the one in this thread..script in this thread shouldnt even touch voltages
Sent from my Transformer Prime TF201 using xda app-developers app
Not that I do any real processor intensive tasks, but I keep my Note2 in Power Save mode 90% of the time and there is no lag whatsoever playing Angry Birds Star Wars. Can't imagine what it would be like with an overclocked GPU. What games you all run that actually tax the GPU?
gundal said:
yes they will not match exactly unless thats a valid step, it picks the closest that matches, when I was configuring it I just knew I needed to step up on level higher beccause it had just crashed on a lower level, so I bumped it by 14 or whatever so that it would pick the next step (which I didnt know offhand)
also.. im pretty sure by those values you ran my script not the one in this thread..script in this thread shouldnt even touch voltages
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
You are right, I posted on wrong thread, corrected and posted on the original thread, thanks gundal
EVOIXGSR said:
Not that I do any real processor intensive tasks, but I keep my Note2 in Power Save mode 90% of the time and there is no lag whatsoever playing Angry Birds Star Wars. Can't imagine what it would be like with an overclocked GPU. What games you all run that actually tax the GPU?
Click to expand...
Click to collapse
Nova 3, the new need for speed most wanted seems to as well but im not sure
i can't find init.d, is it because hybrid rom does not support this init.d?
can i just create a folder of this?
9wire said:
Alternative method...
Open the extracted file with smanager (free, playstore) click the icon above su, boot, then click save, then run, easy.
Click to expand...
Click to collapse
tried this also, but after i run it it says gputweaks733max line 1:................ not found
thank so much
brochador said:
i can't find init.d, is it because hybrid rom does not support this init.d?
can i just create a folder of this?
tried this also, but after i run it it says gputweaks733max line 1:................ not found
Click to expand...
Click to collapse
Use rom toolbox.....its so much easier then running the script app...
And as far as you not seeing the init.d your ROM seems not to support it...what kernel are you on as well?...The develop er of the clean ROM has a mod for init.d support in his thread
kakapt said:
thank so much
Click to expand...
Click to collapse
Hit the thanks...lol
wish777 said:
Use rom toolbox.....its so much easier then running the script app...
And as far as you not seeing the init.d your ROM seems not to support it...what kernel are you on as well?...The develop er of the clean ROM has a mod for init.d support in his thread
Click to expand...
Click to collapse
I have perseus kernel. I really cant find the init.d folder..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
brochador said:
I have perseus kernel. I really cant find the init.d folder..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
What rom are you on?..you dont see anything in the folder I posted in 1st post?
Not a 100% sure..but I believe your rom has to have it set up not the kernel..but they work hand in hand though...sounds like your rom doesnt have it support for init.d
wish777 said:
What rom are you on?..you dont see anything in the folder I posted in 1st post?
Not a 100% sure..but I believe your rom has to have it set up not the kernel..but they work hand in hand though...sounds like your rom doesnt have it support for init.d
Click to expand...
Click to collapse
as i said before, hybrid rom..
seems like it doesnt really support init.d.
Guys, does anyone know how to increase the RAM size on galaxy w? I've tried to use every task killer on the market n still I cant improve my RAM usage. If anyone can help me, plz provide a link or a guide to increase RAM. Thx
Sent from my CM9 powered GT-I8150 using XDA Developers-app
Thomson45 said:
Guys, does anyone know how to increase the RAM size on galaxy w? I've tried to use every task killer on the market n still I cant improve my RAM usage. If anyone can help me, plz provide a link or a guide to increase RAM. Thx
Sent from my CM9 powered GT-I8150 using XDA Developers-app
Click to expand...
Click to collapse
There's no way to increase RAM. You can try to flash arco's CM10 or camcory's SlimBean and use forfivo's MAXMEM kernel.[395 RAM I think] The two ROM's that I recommended are by far the two best Jelly Bean ROM for our phone. They are fast and quite stable for daily use.
cycloneblast said:
There's no way to increase RAM. You can try to flash arco's CM10 or camcory's SlimBean and use forfivo's MAXMEM kernel.[395 RAM I think] The two ROM's that I recommended are by far the two best Jelly Bean ROM for our phone. They are fast and quite stable for daily use.
Click to expand...
Click to collapse
Isn't that MAXMEM kernel compatible with CM9 beta3? Or I must flash CM10 first? If compatible with CM9, how to flash?
I think that is compatible only with JB...
And don't forget that MAXMEM interferes with your Camera.
miki2o said:
I think that is compatible only with JB...
Click to expand...
Click to collapse
Yes its only for JB ROMs. You could try to use RAM Manager and choose [Balance (More free memory)]. I always have 100 free RAM.(Without using any TASK KILLER!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cycloneblast said:
Yes its only for JB ROMs. You could try to use RAM Manager and choose [Balance (More free memory)]. I always have 100 free RAM.(Without using any TASK KILLER!)
Click to expand...
Click to collapse
same in here mate..
Ok, thx. I'll try using ram manager.
Sent from my CM9 powered GT-I8150 using XDA Developers-app
you can try the newest JB rom and change the kernel that made by madridii, if you still using GB, try to change your external memory with class 10 aor higher, that could slightly improve the perfomance :good:
Try madriid kernel 390 mb ram . I use it for cm10.1( i use liquidsmooth) .. Not sure if it is available for cm9. The only con is you cant record 720p (perfectly ok for me )
When i free my ram , i can get up to 200mb free . But normally only 80-120mb free (i use swiftlkey which is heavy, whatsapp always open, facebook..)
gtabr1 said:
Try madriid kernel 390 mb ram . I use it for cm10.1( i use liquidsmooth) .. Not sure if it is available for cm9. The only con is you cant record 720p (perfectly ok for me )
When i free my ram , i can get up to 200mb free . But normally only 80-120mb free (i use swiftlkey which is heavy, whatsapp always open, facebook..)
Click to expand...
Click to collapse
The guy above is not asking questions but necroposting to almost 1 year old threads. If it were a question then ok, but suggesting something to people who stopped continuing a thread almost 1 year ago is pure nonsense.
Ok , it is just my suggestion to whoever is after ram increase.
If someone use the search button or happen to see the thread about ram increase ,my thoughts shared here wont have been " pure nonsense".
gtabr1 said:
Ok , it is just my suggestion to whoever is after ram increase.
If someone use the search button or happen to see the thread about ram increase ,my thoughts shared here wont have been " pure nonsense".
Click to expand...
Click to collapse
Ok, but you know what necroposting is? If it were just that simple I could also jump into all 2 years old "death" threads, even the ones before CM was launched for this device and write everywhere the same suggestion like " Flash JB with xy-kernel and all your problems will be solved".
So like said. If it were a question related to a topic than ok, but flooding the forum with about one and the same suggestion in death threads is nonsense and called necroposting nor helpful anymore to the ones who were discussing there one or two years ago.
armadarizki said:
you can try the newest JB rom and change the kernel that made by madridii, if you still using GB, try to change your external memory with class 10 aor higher, that could slightly improve the perfomance :good:
Click to expand...
Click to collapse
Stop going to all the ancient topics
and posting. We dont need such huge bumps.
gtabr1 said:
Try madriid kernel 390 mb ram . I use it for cm10.1( i use liquidsmooth) .. Not sure if it is available for cm9. The only con is you cant record 720p (perfectly ok for me )
When i free my ram , i can get up to 200mb free . But normally only 80-120mb free (i use swiftlkey which is heavy, whatsapp always open, facebook..)
Click to expand...
Click to collapse
Sent from my GT-I8150 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mal Yrol Engine
Descripition
[UNIVERSAL ENGINE]
Have you thought about playing Real Racing 3 while listening to music on spotfy copy a 500MB file and responds to poup-ups of WhatsApp?
All android ROMs are supported, including Samsung ROMs Stock This engine meets all conceivable functions of a engine in one flash zip
Installing it, plus get a boost on your Android, bonuses will still have all the garbage of your ROM removed! Do not miss ime with bloatware, install and let the Mal Yrol work for you!
Function
°Incredible improvement in Multitasking
°Battery Saver
°Automatic adding support init.d
°Increases the quality of JPEG / JPG to 100%
°Improves the quality of the overall sound
°Remove bloatwares (Including ROMs Samsung)
°2080 Cache Velocity
°Scripts init.d
°Auto hibernates unused bins
°Zipalign In Boot
°Clear the cache on boot
°Auto Zipalign in 48hrs
°Mata unused applications when the screen turns off (Sleep)
°Lowers the clock speed when the phone is asleep
Downloads
DevHost
Flash This zip in your recovery
Credits
*Lennoard Rai
Like Here for more
Itz work in all Roms !!
with custom recovery
flash the recovery and only friend?
browcantor said:
flash the recovery and only friend?
Click to expand...
Click to collapse
Yes
IvsomEmidio said:
Yes
Click to expand...
Click to collapse
ok thank you
no offence but this just popped out of no where over night ... and the same guy is posting it on almost every thread , after some digging i learned it has scripts similar to others if not the same ... i just dont flash anything i see and insight on who the dev is and what exactly we are flashing would be nice
djm25 said:
no offence but this just popped out of no where over night ... and the same guy is posting it on almost every thread , after some digging i learned it has scripts similar to others if not the same ... i just dont flash anything i see and insight on who the dev is and what exactly we are flashing would be nice
Click to expand...
Click to collapse
I respect your opinion, but I can not please everyone
Could you please brief me on how you achieved amazing performance, RAM, and battery saving
@IvsomEmidio, could u please mirror the link? Clicking on the blue download now only reloads the page.
Does it work on stock rom?
And what bloatware will it remove?
i tryed on KK rom and broke supersu
so anybody has tried it? i smell smoke here..
In my country there is a saying: "The Saints are suspected when there is much miracle". Tempting advertisement for conquering naive people ... Who can guarantee that this is not a malicious script?
Pedro Gomes said:
In my country there is a saying: "The Saints are suspected when there is much miracle". Tempting advertisement for conquering naive people ... Who can guarantee that this is not a malicious script?
Click to expand...
Click to collapse
I can [emoji4]. It's a nice script I'm using it and I'm getting an hour of extra battery[emoji33] [emoji33] [emoji3]
Vidhanth said:
I can [emoji4]. It's a nice script I'm using it and I'm getting an hour of extra battery[emoji33] [emoji33] [emoji3]
Click to expand...
Click to collapse
It's just Placebo Effect. 1hr increase of screen on time may be a significantly big gain, but, there are way too many scenarios with which the Screen on time can be increased or decreased.
Vidhanth said:
I can [emoji4]. It's a nice script I'm using it and I'm getting an hour of extra battery[emoji33] [emoji33] [emoji3]
Click to expand...
Click to collapse
An hour gain in the battery? What an amazing gain, huh? And you're sure about your personal data and your privacy when using your phone?You can ensure that there is no script collecting your data while you are amazed about the "speed" of a mobile phone?
Pedro Gomes said:
An hour gain in the battery? What an amazing gain, huh? And you're sure about your personal data and your privacy when using your phone?You can ensure that there is no script collecting your data while you are amazed about the "speed" of a mobile phone?
Click to expand...
Click to collapse
Oh. Never thought of that. Will scrutinize the script and report.
EDIT-- Nope. Nothing fishy here. All good (As far as I understand init d scripts[emoji4] )
U can try it.
Thanks for feedback
Vidhanth said:
Oh. Never thought of that. Will scrutinize the script and report.
EDIT-- Nope. Nothing fishy here. All good (As far as I understand init d scripts[emoji4] )
U can try it.
Click to expand...
Click to collapse
Did you gain one extra hour of screen on time or just battery?
Sent from my XT1068 running stock Kitkat with GravityBox
pranshubatra707 said:
Did you gain one extra hour of screen on time or just battery?
Sent from my XT1068 running stock Kitkat with GravityBox
Click to expand...
Click to collapse
Just battery
-------------------------------