Related
Ok here is mod for all working rom for HTC one V
Version: FX version 2.2.0.6 / XHiFi version 2.0.0.9
Codename: (FX version) Beautiful / (XHiFi version) X-Factor
Compiled date: May 4,2013 / May 4,2013 - Official Release
Language: English (United States) / Simplified Chinese / Traditional Chinese
downloads
FX version v2.2.0.6: http://www.mediafire.com/download.php?wn2cn1lrltn685x (In-App Installation 2.3/4.0/4.1/4.2)
XHiFi version v2.0.0.9: http://www.mediafire.com/download.php?ey6ablp36s7uqbh (In-App Installation 2.3/4.0/4.1/4.2)
In-App Installation within V4A
Requirement: Rooted, installed Busybox.
Description: Starting from FX v2.2.0.4/XHiFi v2.0.0.7, Intelligent Setup is added to V4A.
This setup replaces auto/manual installation, providing the easiest installation method.
Just follow the instructions when you first run the V4A app.
[FX/XHiFi version]
Make sure BUSYBOX Fully Installed
1. Extract and Install ViPER4Android_FX.apk
2. Run FX app, when prompt, choose Yes to install/update.
3. Choose correct CPU Type.
4. Reboot device.
Switch to Compatible Mode (To use with any other sound effects including system-provided/third party)
1. In option, switch to Compatible Mode.
2. Reboot device.
3. In sound settings > music effects > Choose anything other than V4A, because V4A effects will work just like that in compatible mode.
Switch to Safe Mode (To work with almost any music player)
1. In option, switch to Safe Mode.
2. Reboot, done.
driver type selection ???
CortexA8 with NEON
(because HTC ONE V is a Single core processor)
plz give the original link
Thanks!
after installation (for Viper4android FX)
for headset
master power =enable
playback gain control=enable
effect strength = moderate
Firequalizer=enable
select preset= your wish
remaining leave it as it is...
Seraz007 said:
plz give the original link
Thanks!
Click to expand...
Click to collapse
given one is the original link only
gulsher said:
given one is the original link only
Click to expand...
Click to collapse
i mean the original thread
I'am using the same above configuration preset =rock
with poweramp
equalizer= bass booster
and its amazing
Seraz007 said:
i mean the original thread
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2191223
here you go
Wats the diff. B/w fx version and xhifi version????
rohov said:
Wats the diff. B/w fx version and xhifi version????
Click to expand...
Click to collapse
fx is used as normal for speaker or earphone
xhifi is used for retoring the sound quality basically used for earphones
gulsher said:
fx is used as normal for speaker or earphone
xhifi is used for retoring the sound quality basically used for earphones
Click to expand...
Click to collapse
So basically, which one is recomended???sry, i cant figure out about this mod and i dont kno y???:banghead:
just uninstall all the things related to it even drivers
give a restart
install FX version only
driver should be cortex a8
after installation (for Viper4android FX)
for headset
master power =enable
playback gain control=enable
effect strength = moderate
Firequalizer=enable
select preset= your wish
remaining leave it as it is.
and download this http://www.mediafire.com/download.php?33l7svyq1sf46th
and paste (there is a folder created in memory card called "viper4Android") there inside kernel and extract it there only!
and from FX
there is option in covolver
Impulse response tap it and select the option any 1 according to your need
I really do recommend this audio mod, best for music lovers, currently using NexMusic and This Mod = Ear Orgasms!!!!!
try this setting
playback gain control is on
effect strength: extreme
max gain: inf
max output: 0db
"FIRE" is on
preset: rock
Convolver is on
IR: UnitpulseDirac
Field Surround & Reverb is OFF
Dynamic System is on
Listening device: Unknown type I
Dynamic Bass: 20%
Tube: on
output gain: 0db
Limit Threshhold: -3.0db(-6.0db depends on the song,my mood)
rockstar_26 said:
I really do recommend this audio mod, best for music lovers, currently using NexMusic and This Mod = Ear Orgasms!!!!!
Click to expand...
Click to collapse
can you share EarOrgasms file mode??
zhuhang is the official maintainer of this mod, so I'm closing this thread. Please read the sharing policy before posting.
Hi Guys,
For those who want to use viper4android on Blisspop ROM (or any Lollipop ROM), please follow these steps:
1. Uninstall AudioFX 1.4.0 (I use Titanium Backup to uninstall system app).
2. Download SELinuxModeChanger from - <http://forum.xda-developers.com/showthread.php?t=2524485>
3. Download latest viper4android (v2.3.4.0) from - <http://forum.xda-developers.com/showthread.php?t=2191223>
4. Install SELinuxModeChanger & change the Mode to "Permissive".
5. Now install viper4android.
6. Open viper4android app:
a. Install driver
b. Select "FX Compatible Mode" --> Compatible
7. Reboot.
I have tested this & it is working perfectly fine on Blisspop ROM (11/02/2015 build) !
(fyi, I'm using PowerAmp music player)
PS: I have not developed any of the mentioned applications/mods.
I'm just sharing info that I found & it worked for me
Thanks to all the developers for creating ROMs, MODs & APPs, cheers !:good:
First !!!
Thnx mate
rocky4android said:
Hi Guys,
For those who want to use viper4android on Blisspop ROM (or any Lollipop ROM), please follow these steps:
1. Uninstall AudioFX 1.4.0 (I use Titanium Backup to uninstall system app).
2. Download SELinuxModeChanger from - http://forum.xda-developers.com/show....php?t=2524485
3. Download latest viper4android (v2.3.4.0) from - http://forum.xda-developers.com/show....php?t=2191223
4. Install SELinuxModeChanger & change the Mode to "Permissive".
5. Now install viper4android.
6. Open viper4android app:
a. Install driver
b. Select "FX Compatible Mode" --> Compatible
7. Reboot.
I have tested this & it is working perfectly fine on Blisspop ROM (11/02/2015 build) !
(fyi, I'm using PowerAmp music player)
PS: I have not developed any of the mentioned applications/mods.
I'm just sharing info that I found & it worked for me
Thanks to all the developers for creating ROMs, MODs & APPs, cheers !:good:
Click to expand...
Click to collapse
you must tell about music player and the changes to be made in the music player settings like if it is poweramp you have to untick direct fx and tick audio fx
Thanx !
Working
Im using moto g4 plus with stock 7.0
I wanted to install viper but it needs busy box...
I tried installing it using version 54,53,50 but it doesn't work please help me.. please help me to installing busy box in my XT1643..
Or u can help me by providing me with steps for installing dolby atmos for nougat moto g4 plus xt1643...
Waiting for your reply...
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. Install the flar2 permissive zip. https://www.androidfilehost.com/?fid=23991606952602503
3. Install Arise Sound Systems zip. https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
tywinlannister said:
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. Install the flar2 permissive zip. https://www.androidfilehost.com/?fid=23991606952602503
3. Install Arise Sound Systems zip. https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
Click to expand...
Click to collapse
Flair 2 should be installed from twrp??
Adarsh balu said:
Flair 2 should be installed from twrp??
Click to expand...
Click to collapse
Yes, a flashable zip is to be installed in twrp.
tywinlannister said:
Yes, a flashable zip is to be installed in twrp.
Click to expand...
Click to collapse
Is it working..cuz i tried all the viperfx and dolby atmos available in xda...it was not working for me:crying:
The forum link u have given is very messy and conatins roughly 2000 pages... Do u have a link to the file directly
Adarsh balu said:
Is it working..cuz i tried all the viperfx and dolby atmos available in xda
Click to expand...
Click to collapse
Arise Sound Systems, Divine Beats Gaana Edition, Biohazard... all work but need SE Linux to be permissive and Busy Box too. The links are in the OP. Please read the OP of the post before commenting. We can't directly share file links, XDA Rules mate.
tywinlannister said:
Arise Sound Systems, Divine Beats Gaana Edition, Biohazard... all work but need SE Linux to be permissive and Busy Box too.
Click to expand...
Click to collapse
I have busy box installed and se linux to permissive...
Let me tell u something about my device...Moto g4 plus...7.0 nougat rooted with latest twrp and elemental X kernel... Xt1643 is model using stock rom
@1chrome dude can you look into this, bro? ?
tywinlannister said:
@1chrome dude can you look into this, bro? ?
Click to expand...
Click to collapse
Yes... What to do on that
Adarsh balu said:
I have busy box installed and se linux to permissive...
Let me tell u something about my device...Moto g4 plus...7.0 nougat rooted with latest twrp and elemental X kernel... Xt1643 is model using stock rom
Click to expand...
Click to collapse
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
echo92 said:
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
Click to expand...
Click to collapse
No my busy box is working perfectly now...I have driver install failed I/O error...
echo92 said:
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
Click to expand...
Click to collapse
This is screenshot
Adarsh balu said:
No my busy box is working perfectly now...I have driver install failed I/O error...
Click to expand...
Click to collapse
Try downloading/flashing the Viper4Arise Swansong build from the ARISE thread linked by tywinlannister. It's a big clickable SwanSong™ under the 'Meet the Arise team' section on the opening post. You may also find the main ARISE Google+ page a useful resource (e.g. here's someone else with the same error. https://plus.google.com/111150029808118208419/posts/VP2NjJ6hEYc Have a look through the 20 or so comments and see if there's anything helpful in that - ignore the off topic comments towards the end).
Also, check you've got audio_effects.conf and vendor_audio_effects.conf in /system/etc using a root browser. See this post by the ARISE team on their Google+ page. https://plus.google.com/+JasonPasch5/posts/AYUSSo5mG9t
echo92 said:
Try downloading/flashing the Viper4Arise Swansong build from the ARISE thread linked by tywinlannister. It's a big clickable SwanSong™ under the 'Meet the Arise team' section on the opening post. You may also find the main ARISE Google+ page a useful resource (e.g. here's someone else with the same error. https://plus.google.com/111150029808118208419/posts/VP2NjJ6hEYc Have a look through the 20 or so comments and see if there's anything helpful in that - ignore the off topic comments towards the end).
Also, check you've got audio_effects.conf and vendor_audio_effects.conf in /system/etc using a root browser. See this post by the ARISE team on their Google+ page. https://plus.google.com/+JasonPasch5/posts/AYUSSo5mG9t
Click to expand...
Click to collapse
I will check it and get back to u..anyway thnq for sharing... Appreciate it :good:
Adarsh balu said:
This is screenshot
Click to expand...
Click to collapse
@Adarsh balu
The issue is probably with Viper not getting Storage permissions. I/O is to do with input and output of data transfer on a peripheral device, which is what makes me think it's that.
See if it has it under Apps > Vioer4Android > Permissions > Storage
It's a wild guess based on logic - could be wrong. Let us know if it works. See if you need to flash another zip. Sometimes that uses to fix issues for me. I always used Viper4Arise not Viper4Android...
1chrome said:
@Adarsh balu
The issue is probably with Viper not getting Storage permissions. I/O is to do with input and output of data transfer on a peripheral device, which is what makes me think it's that.
See if it has it under Apps > Vioer4Android > Permissions > Storage
It's a wild guess based on logic - could be wrong. Let us know if it works. See if you need to flash another zip. Sometimes that uses to fix issues for me. I always used Viper4Arise not Viper4Android...
Click to expand...
Click to collapse
Yes it was logic...but i have already given permission to storage
Adarsh balu said:
Yes it was logic...but i have already given permission to storage
Click to expand...
Click to collapse
Oh all the best fixing it.
1chrome said:
Oh all the best fixing it.
Click to expand...
Click to collapse
:laugh:
Swansong (Viper4Arise)
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Same as provided by @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Flash Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip)
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero)
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens, just dirty flash your rom (only wipe cache and dalvik) and everything will be good. :good:
NB: There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
nazim7 said:
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Same as provided by @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Flash Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip)
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero)
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens, just dirty flash your rom (only wipe cache and dalvik) and everything will be good. :good:
NB: There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
Click to expand...
Click to collapse
Thnq bro let me check it...Can u give me a screenshot of it..
Hello Guys!
As you know, lots of people root their phones only for Viper4Android. It Increases the audio output of your phone x5 times*
So What You'll Need.
1. BusyBox
2. Latest Version Of BusyBox By stericson
3. Latest Viper4Android Version.
4. Motion Based Roms
--- Disclaimer ---
Me Neither XDA take responsibilty for what you do to your phone. It is you who are modifying the files and you take all the responsibilty. Don't ask me for help if you mess things up. Please take a Nandroid backup before you proceed. Please read the whole guide for full results
--- STEPS ---
•Install BusyBox by stericson from playstore.
•Install BusyBox on your phone
•After BusyBox installation, Launch Viper4Android and install the driver
•Re-Boot your phone
•After Re-Booting, launch Viper4Android and you will get an error message! Don't worry tho, you will not face any problems. Close Viper4Android
•After Closing, open Build.Prop with your root browser or any other browser with editing capabilities.
•Find This Line and replace-
lpa.use-stagefright=true
To
lpa.use-stagefright=false
•Save the file
•Then, Go to setting and application manager
•Go to the all tab
•Search SoundAlive and disable it(Nothing wont happen)
•Re-Boot Phone!
•Now play any song and see if the driver is processing the audio.
(TO SEE IF IT'S PROCESSING, OPEN VIPER4ANDROID AND TAP THE 3 DOTS ON TOP RIGHT CORNER, TAP ON DRIVER STATUS AND CHECK . )
--- THAT'S IT ---
Now you can tune the setting of viper4android to your heart's content.
--------------------
For Advanced Users -
Tap on 3 dots and selct UI Settings, select your option and go on...:laugh:
TESTED ON : GT-I9300I, Running Project Lucky V1.1 ROM, Android 5.1.1
Guide By - SnapDrag910
Bugs - Driver Restarts itself while playing audio. It takes a second for it to switch off and restart.
*** IT DOES NOT WORK ON CM 11 OR 12 BASED ROMS ***
Press The Thanks Button if i helped you!
I used Viper4Android on Cm 11 , 12 and 12.1 so it can work with them
for solving the bug if restarting drivers use this sound mod it's better than normal Viper
https://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
I used it to on pl 1.1
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Greenspoof said:
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Click to expand...
Click to collapse
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Techguy777 said:
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Click to expand...
Click to collapse
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Nemix77 said:
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Click to expand...
Click to collapse
It's switch automatically, just connect your headphone
Greenspoof said:
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
Click to expand...
Click to collapse
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Techguy777 said:
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Click to expand...
Click to collapse
Didn't know that. So do you use v2.3.4 or the new one ?
Greenspoof said:
Didn't know that. So do you use v2.3.4 or the new one ?
Click to expand...
Click to collapse
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And 2.3.4 is really better than nowadays viper? Like did you compare? Thx for your time
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And if so, could you tell me where did you download this version of viper? And how did you installed it ?
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
I installed everything over magisk.
First Ainur Narsil and Audio modification library then reboot. After that viper then open viper and install the driver. The device will reboot. In magisk deactivate both Ainur and AML then open viper again. Driver should reinstall again. After reboot it should work. Could be that you have to enforce in settings. In a link above there is this method mentioned.
Greenspoof said:
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
Click to expand...
Click to collapse
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
It worked thx !!!! How do I choose the driver type? Because I saw there was 3 driver, super quality, high quality and power saving. Or it's already in super quality?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Well statut is abnormal, I will try with James Dps but I'm not a fan of these kind of workaround lol, but the link of Google you gave me is deleted?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Nevermind, I thought I had to install Jamesdsp "verison", like a special Jamesdsp lol, everything work great right now!!! I really thank you for your time, really ! But just one last question subsiste, how I'm sure it's the super quality driver that is installed and not high quality or energy saving?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, No, Yes, No, Yes, Yes, Reset.
3. Install Audio Modification Library (v4.0), reboot.
4. Instalar Viper4Android FX Legacy v4.4 (v2.5.0.4)
5. Options: Vol +, Vol-, Vol-, Vol +, Reset.
6. Install the JamesDSP module.
7. Disable any native system / ROM equalizer.
Install Viper4Android FX app (v2.6.0.6, Jan/2019) via github or backup
Option: find out him here or Magisk folder (use any root explorer for that).
Path: /data/adb/Modules/Viper (old app)
For newest V4A app use search or Rose.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage was formatted.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips and KZ). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip without any conversion files.
The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
NOTE4: Maybe just AML + FX Legacy or 2.7 + JamesDSP is enough. You can remove James app after installed his Module.
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
alefmm said:
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, Up, Yes, Up, Yes, No, Reboot.
3. Install Audio Modification Library (v4.0), reboot.
4. Install Viper4Android FX v2.7.2.1 (driver v2.5.0.4)
NOTE: Viper FX will install the latest app, finish installing Driver v2.5.0.4 on it and running (do some test to confirm).
Afterwards, remove the latest app and install the v2.6.0.6 app.
Install Viper4Android FX app (v2.6.0.6, Jan/2019), required download via github or backup.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage formatting.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip. The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
Click to expand...
Click to collapse
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Greenspoof said:
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Click to expand...
Click to collapse
Does't work and duplicate profiles (older profiles, if you don't migrate will works idem).
As I said, I tested both and the most stable is Driver Version: 2.5.0.4 and Viper4Android FX app v2.6.0.6.
Doing it correct, you can allow quality more than 200% compared without it.