[Q] i317m downgrading from 4.3 to 4.1.2 question - AT&T Samsung Galaxy Note II

Hi all the experts!
so This question is regarding Downgrading from 4.3 to 4.1.2
I'll point form my question to save everyone's time
- I have canadian variant of SN2 (i317m) and recently upgraded to 4.3 (biggest mistake!!), where build is I317MVLUCMK5
- I'd like to return to 4.1.2 (I317MVLBMA3), So I tried to flash with ODIN, it fails..... i think its probably due to KNOX
- I've read and tried many methods, but most of them are for i317, not i317m
- I really don't care about (KNOX counter = warranty), but the thing is I don't know how to do this process (It might be real simple for expert)
PLEASE help me with this issue!
EDIT:
If I succeed to root my phone (4.3), does this mean that odin will not give any more FAIL message when flashing 4.1.2 stock ROM??

The fail in Odin is likely due to the presence of an older bootloader in the stock package you are using.
If a stock package without bootloader is not available I can modify this one and remove the bootloader and tz files.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

i317m - 4.1.2(Rogers) stock file with removed bootloader
Zen Arcade said:
The fail in Odin is likely due to the presence of an older bootloader in the stock package you are using.
If a stock package without bootloader is not available I can modify this one and remove the bootloader and tz files.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
that would be so nice and I'd really appreciate that.
Apparently, I can't find one(4,1,2) without bootloader (Knox thing I believe),
Could you please help me with this problem?
all I want is return to 4.1.2 !!

jaywhy89 said:
that would be so nice and I'd really appreciate that.
Apparently, I can't find one(4,1,2) without bootloader (Knox thing I believe),
Could you please help me with this problem?
all I want is return to 4.1.2 !!
Click to expand...
Click to collapse
I found some here...
http://androidromupdate.com/2012/11...-sgh-i317m-canada-original-stock-romfirmware/
Which carrier ?
I have a premium account for http://rapidgator.net. I can download if you all want.
They'll probably have the bootloader so it needs some Zen magic.

Rogers 4.1.2 I317MVLBMA3
dicksteele said:
I found some here...
Which carrier ?
I have a premium account for I can download if you all want.
They'll probably have the bootloader so it needs some Zen magic.
Click to expand...
Click to collapse
carrier is ROGERS, and from those site, I think it is I317MVLBMA3 4.1.2 Stock Firmware, but isn't this still file still containing bootload which my current 4.3 version note2 can't install in Odin?
I'm little confused!
but still, thank you so much!

jaywhy89 said:
carrier is ROGERS, and from those site, I think it is I317MVLBMA3 4.1.2 Stock Firmware, but isn't this still file still containing bootload which my current 4.3 version note2 can't install in Odin?
I'm little confused!
but still, thank you so much!
Click to expand...
Click to collapse
You are right, I missed where you said you had it already.
I figured there would not be one out there and found one for Zen to modify.
I'm downloading it now and I can post it somewhere he can download it from.
He can grab it from my link or you can let him know where you found it, and grab it from there.
The host from my link has slow download speed if you don't have a premium account. That's why I offered.
Sorry for the confusion.

dicksteele said:
You are right, I missed where you said you had it already.
I figured there would not be one out there and found one for Zen to modify.
I'm downloading it now and I can post it somewhere he can download it from.
He can grab it from my link or you can let him know where you found it, and grab it from there.
The host from my link has slow download speed if you don't have a premium account. That's why I offered.
Sorry for the confusion.
Click to expand...
Click to collapse
Thank you so much bro, I'm just waiting for ZEN now then

jaywhy89 said:
Thank you so much bro, I'm just waiting for ZEN now then
Click to expand...
Click to collapse
The race is on! I'm downloading both the LJ2 and the MA3 firmwares for Rogers.
If the LJ2 is the same as for AT&T, it won't contain the bootloader - so you could try flashing that. Granted it's 4.1.1 and if you try to OTA from it, you'll need to follow Mr. Steele's 4.1.1 to MK6 guide (post #2) to get to likely the last 4.1.2 release for Rogers.
But... once I have MA3 in my hands, I'll strip out the sboot and tz files and repackage for Odin... My downloader counter says 5 hours so it won't be until tomorrow unless DS gets them turned around faster :good::good:

Zen Arcade said:
The race is on! I'm downloading both the LJ2 and the MA3 firmwares for Rogers.
If the LJ2 is the same as for AT&T, it won't contain the bootloader - so you could try flashing that. Granted it's 4.1.1 and if you try to OTA from it, you'll need to follow Mr. Steele's 4.1.1 to MK6 guide (post #2) to get to likely the last 4.1.2 release for Rogers.
But... once I have MA3 in my hands, I'll strip out the sboot and tz files and repackage for Odin... My downloader counter says 5 hours so it won't be until tomorrow unless DS gets them turned around faster :good::good:
Click to expand...
Click to collapse
My download is done for MA3..... Trying to upload to Androidhost now
uploading 18 MB of 886 MB uploaded

Zen Arcade said:
The race is on! I'm downloading both the LJ2 and the MA3 firmwares for Rogers.
If the LJ2 is the same as for AT&T, it won't contain the bootloader - so you could try flashing that. Granted it's 4.1.1 and if you try to OTA from it, you'll need to follow Mr. Steele's 4.1.1 to MK6 guide (post #2) to get to likely the last 4.1.2 release for Rogers.
But... once I have MA3 in my hands, I'll strip out the sboot and tz files and repackage for Odin... My downloader counter says 5 hours so it won't be until tomorrow unless DS gets them turned around faster :good::good:
Click to expand...
Click to collapse
oh my god ZEN!
thank you so much, thank you thank you thank you!!!!!!!
So, from my understanding, I can use odin -> select the modified MA3 from you (4.1.2, once again thank you so much!!!) -> flash just like any other steps?
sorry I'm really newb to this and I've already bricked so many times trying to do this, just wanted to make sure!

dicksteele said:
My download is done for MA3..... Trying to upload to Androidhost now
uploading 18 MB of 886 MB uploaded
Click to expand...
Click to collapse
thank you so much! I hope I can get my phone working in 4.1.2 again!! just like back in the days

jaywhy89 said:
So, from my understanding, I can use odin -> select the modified MA3 from you (4.1.2, once again thank you so much!!!) -> flash just like any other steps?
Click to expand...
Click to collapse
Yes. With the bootloader removed you should get a completed flash. Coming back from 4.3 I believe you need to do a factory reset from recovery afterward. Follow the guide for i317. (perez6991 or dicksteele)
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

jaywhy89 said:
thank you so much! I hope I can get my phone working in 4.1.2 again!! just like back in the days
Click to expand...
Click to collapse
Good luck !
Sent from my SGH-I317 using XDA Premium 4 mobile app

Zen Arcade said:
Yes. With the bootloader removed you should get a completed flash. Coming back from 4.3 I believe you need to do a factory reset from recovery afterward. Follow the guide for i317. (perez6991 or dicksteele)
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, there
where Can I download your modified version in the future?

jaywhy89 said:
where Can I download your modified version in the future?
Click to expand...
Click to collapse
From right here >>> http://d-h.st/KDX
dicksteele & perez6991, I'm OK with you adding this to your how to threads if you want to do so. (Note that it is Rogers specific)

Zen Arcade said:
From right here >>> http://d-h.st/KDX
dicksteele & perez6991, I'm OK with you adding this to your how to threads if you want to do so. (Note that it is Rogers specific)
Click to expand...
Click to collapse
Awesome, Zen. Thank you.
jaywhy89, when you get back up and running, can we get together and go through your steps to make sure we post them correctly.

Zen Arcade said:
From right here >>> http://d-h.st/KDX
dicksteele & perez6991, I'm OK with you adding this to your how to threads if you want to do so. (Note that it is Rogers specific)
Click to expand...
Click to collapse
Hi zen!
I'm finally downloading, and I'll post the updates

dicksteele said:
Awesome, Zen. Thank you.
jaywhy89, when you get back up and running, can we get together and go through your steps to make sure we post them correctly.
Click to expand...
Click to collapse
Okay I downloaded the file without bootload (Thanks to ZEN )
1. I opened ODIN, chose the modified .md5 file from PDA, checked on Auto-reboot and F.Reset Time
2. Finally, it went through everything fine without any problem like before ( I think because ZEN removed bootload which caused FAIL)
3. I rebooted, but it was stuck on Samsung logo
4. I went into that mode where you press Volume UP + POWER + HOME button
5. format cache and then factory reset
6. now I'm back to 4.1.2 now!!!!!!!!!!!!!!!!! OH MY GOD ZEN THANK YOU SO MUCH

Glad to hear it worked out for you. Thanks for reporting back with your results. :good::good::victory:

Related

[Q] Update bootloader?

Device: AT&T Galaxy S3
Rom:[ROM] AOKP(Jellybean 4.2.2 )Task650 (5.14.2013) (AT&T)
I wanted to update to the devs newest release but i need to update my bootloader in order to do so and ive never done that so if you have any advice or something i can read up on that would be awesome
I "I made some ODIN-flashable files that contain the bootloader, RPM, TZ, and baseband of the stated versions , so that people won't have to go completely back to stock TW. It's intended for those not on the necessary bootloaders yet so that they can flash future CM builds. Put them into the PDA section in Odin and flash away.
I747UCDLK3 (AT&T): http://d-h.st/L64
http://www.mediafire.com/?pu279m19ob7ufru
I747MVLDLK4 (Canadian): http://d-h.st/yqV
http://www.mediafire.com/?74b1e321p537f5d
Note: They're untested, but should work as intended. Tested by fellow users, works fine. Please flash at your own risk!
EDIT: Threw up Mediafire mirrors, since d-h.st seems to be down randomly."
Credit goes to another user who made this. It was posted on the cyanogenmod i747 thread.
http://forum.xda-developers.com/showthread.php?t=1778270
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
it's pretty simple and harmless. took me less than a minute. Domoo has linked you to Jiangyi's post on this topic, which includes his downloads and instructions. cheers
well that was easy thanks for the help guys!
Flashing a bootloader is not harmless. It is one of the few things that can hard brick this device.
mrhaley30705 said:
Flashing a bootloader is not harmless. It is one of the few things that can hard brick this device.
Click to expand...
Click to collapse
i guess i'm wondering why this comment was necessary considering this threads circumstances and the correct information being posted. bootloaders dont kill people. people kill people...
xBeerdroiDx said:
i guess i'm wondering why this comment was necessary considering this threads circumstances and the correct information being posted. bootloaders dont kill people. people kill people...
Click to expand...
Click to collapse
Because it was a good warning. Flashing a ROM should not be taken lightly and flashing a bootloader should be done with alot of care as it can brick your device to the point of needed a JTAG to fix.
zelendel said:
Because it was a good warning. Flashing a ROM should not be taken lightly and flashing a bootloader should be done with alot of care as it can brick your device to the point of needed a JTAG to fix.
Click to expand...
Click to collapse
yes, bootloaders are very serious business. just because this bootloader flashed without error does not mean that the operation is not serious. take note, OP.
zelendel, everything in context.
cheers
I have to go into download mode when I go to update the bootloader right?
Sent from my SGH-I747 using XDA Premium HD app
I haven't messed with boot loaders in a long time....my baseband version is already ucdlk3...that's the modem does that mean I would need an update?
Sent from my SGH-I747 using xda premium
Stankydanky702 said:
I have to go into download mode when I go to update the bootloader right? please take the time to read up on this procedure and understand what you're doing. best of luck.
Sent from my SGH-I747 using XDA Premium HD app
Click to expand...
Click to collapse
yes sir. you have to be in download mode to flash anything via odin.
http://forum.xda-developers.com/showpost.php?p=41535366&postcount=26684
thegodsquirrel said:
I haven't messed with boot loaders in a long time....my baseband version is already ucdlk3...that's the modem does that mean I would need an update?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
As long as your bootloader ends in a dlk3 then you have the most recent one.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Yes you go into download mode
Sent from my SGH-I747 using xda app-developers app
You can check your bootloader version by opening a terminal and typing:
Code:
su
getprop ro.bootloader
I747UCDLK3. Most current. Got it from At&t recently...I am surprised that they did the update. I didn't let the phone OTA either. Honestly, though I didn't look, flashed it out of the box.
thegodsquirrel said:
I747UCDLK3. Most current. Got it from At&t recently...I am surprised that they did the update. I didn't let the phone OTA either. Honestly, though I didn't look, flashed it out of the box.
Click to expand...
Click to collapse
I'm on Rogers, with bootloader I747MVLALH1, haven't flashed anything since mid April. Should I use ODIN to flash the I747MVLDLK4 bootloader? I was planning on updating to a newer CM10.1 nightly and just saw that I needed a new bootloader to do it properly.
ily112 said:
I'm on Rogers, with bootloader I747MVLALH1, haven't flashed anything since mid April. Should I use ODIN to flash the I747MVLDLK4 bootloader? I was planning on updating to a newer CM10.1 nightly and just saw that I needed a new bootloader to do it properly.
Click to expand...
Click to collapse
You need the new bootloader for the newer nightlies to work.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
The I747MVLDLK4 bootloader correct? And once I flash that bootloader, will it still work even with my 04/13 Nightly that I have currently running? Wouldn't want flash the bootloader and not have the phone boot so I couldn't flash the newer Nightlies. Thanks for the help btw, really appreciate it!
ily112 said:
The I747MVLDLK4 bootloader correct? And once I flash that bootloader, will it still work even with my 04/13 Nightly that I have currently running? Wouldn't want flash the bootloader and not have the phone boot so I couldn't flash the newer Nightlies. Thanks for the help btw, really appreciate it!
Click to expand...
Click to collapse
bootloader thread: http://forum.xda-developers.com/showpost.php?p=41503727&postcount=13716
tasks post:
@ Everyone
I don't have time to screw around. I just tested this and it works fine. I just would've rather bricked my device rather than yours. That's why I like to test all links for these types of things before I promote them off to you guys..
1.) Go here (above posted thread link)
2.) Put phone into download mode and then open Odin.
3.) Choose the PDA slot and then select the correct file for your device (AT&T is LK3)
4.) Hit start and wait until its finished.
5.) Done
5.) Remind me that I shouldn't be trying to do this from my phone. All it does it piss me off.
[deleted]

[Q] Switching ROMS?

hi i have a note 2 sgh-I317m and im currently on CleanRom 5.0
ive been looking at the new Ditto rom for note 2 and i want to switch, but is there a certain process i have to go through to switch? or can i just upgrade on top of cleanrom atm?
You should follow the op's (developer) instructions..Some of these 4.3 roms want you to flash a file for the 4.3 bootloader...I'd read the instructions very carefully and read as many post as you can because more then usual you'll face the same issues they had...
good luck
PhillyTorr said:
hi i have a note 2 sgh-I317m and im currently on CleanRom 5.0
ive been looking at the new Ditto rom for note 2 and i want to switch, but is there a certain process i have to go through to switch? or can i just upgrade on top of cleanrom atm?
Click to expand...
Click to collapse
Check out that rom tonight. He is adding a new version so wait and see if it's set up for the 317m
Sent from my phone
awesome k thanks alot! im using TWRP also so would it work for 4.3 or do i need to flash something else onto it
PhillyTorr said:
awesome k thanks alot! im using TWRP also so would it work for 4.3 or do i need to flash something else onto it
Click to expand...
Click to collapse
If your on 4.1.2 you will need to either flash the att I317 leak if your on att it's on post 226 in the general forum att 4.3 leak or flash a 4.3 bootloader as per the ops instruction in the rom you want. Both use Odin. If you pick the first option it will wipe your device and make you fully stock. So it will require you to root again and flash twrp. The up side it's the most stable way. The second uses Odin to flash. Some have reported problems. Read through the first few pages of the rom to see the issues.
Sent from my phone
wow ok thanks! ya im on 4.1.2 right now so i have to do that, but im with rogers, when i flashed CleanROM it said att and rogers are similar so i guess that will apply here too but ill read up on it to make sure!
PhillyTorr said:
wow ok thanks! ya im on 4.1.2 right now so i have to do that, but im with rogers, when i flashed CleanROM it said att and rogers are similar so i guess that will apply here too but ill read up on it to make sure!
Click to expand...
Click to collapse
Flash the 4.3 rogers update official and reroot etc see if there is a 4.3 rogers bootloader to flash separate.
Sent from my phone
210euser said:
Flash the 4.3 rogers update official and reroot etc see if there is a 4.3 rogers bootloader to flash separate.
Sent from my phone
Click to expand...
Click to collapse
Can i do a OTA update on my phone or will that not work? and whats the best way to back up your phone before doing all this?
Definitely read and read some more before you jump into something.
PhillyTorr said:
Can i do a OTA update on my phone or will that not work? and whats the best way to back up your phone before doing all this?
Click to expand...
Click to collapse
OTA will only work with a stock 3e recovery...
But taking a factory update over the top of a rooted rom is not a good idea...
Backups are done with a custom recovery...and yes...you need to start reading and learning the proper steps or you will end up making a paper weight..... g
Sent from my GT-N7105 using XDA Premium 4 mobile app
gregsarg said:
OTA will only work with a stock 3e recovery...
But taking a factory update over the top of a rooted rom is not a good idea...
Backups are done with a custom recovery...and yes...you need to start reading and learning the proper steps or you will end up making a paper weight..... g
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok thanks!! S:
hmm so to go from 4.1.2. to 4.3 i need to flash a 4.3 rom, then re root, then flash TWRP again, then DN3 rom (once its out) ?
PhillyTorr;4817301p said:
ok thanks!! S:
hmm so to go from 4.1.2. to 4.3 i need to flash a 4.3 rom, then re root, then flash TWRP again, then DN3 rom (once its out) ?
Click to expand...
Click to collapse
No just flash 4.3 over top of the rom your using now no need to do all that. Just make sure to read flashing instructions carefully though as others have stated

[BootLoader] [MODEM] Test Odin UVUCNB4

UPDATED BOOTLOADER POSTED.
********************** THIS IS A TEST FIRST. DO NOT, I REPEAT DO NOT TRY TO ODIN THIS BOOTLOADER IF YOU ARE NOT EXPERIENCED. BRICKING YOUR PHONE, FLASH FLOODS, AUDITS, AND EX-GIRLFRIENDS KEYING YOUR CAR ARE NOT MY FAULT. YOU TRY TO ODIN BL OF YOUR OWN FREE WILL. **********************************************
ANY WHO,
Can somebody please flash this via Odin and make sure that it finishes the process. I'm still researching to see if you need a pit to flash the BL by itself.
THanks guys.
DOWNLOAD
LOAD bootloader.tar.md5 INTO BL ON ODIN
START
BL_N900TUVUCNB4
MD5SUM:b9424697d6a75dba43f019825c45a006
CP_N900TUVUCNB4_Modem This CP only contains modem.bin
MD5SUM:52d72b098819991ab88101757d8e2a8a
CP_N900TUVUCNB4_modem2x This CP contains both modem.bin and Non-Hlos
MD5SUM:82ec4cdaff1492439673391902439604
Dev-Host
cp_N900TUVUCNB4_modem.tar.md5 - 53.49 MB​
I'm getting stuck at the first part sli.mbn, but i already have the updated bootloader. From what i've been reading, this new bootloader my not let you downgrade as it's locked (or partially locked, not sure)
So somebody on old baseband looking to upgrade to new baseband should try this out.
has anyone tried this? id do it myself but i'm in the middle of the gulf with slower than slow internet ,took me five min just to write this reply
dragonstalker said:
I'm getting stuck at the first part sli.mbn, but i already have the updated bootloader. From what i've been reading, this new bootloader my not let you downgrade as it's locked (or partially locked, not sure)
So somebody on old baseband looking to upgrade to new baseband should try this out.
Click to expand...
Click to collapse
It's not locked. It's rollback-protected.
Read this whole thread and you will understand why (except in a few unique situations) you cannot downgrade the bootloader: http://forum.xda-developers.com/showthread.php?t=2642207
Upgrading the bootloader and stock ROMs is a one-way street for the majority of us.
dragonstalker said:
I'm getting stuck at the first part sli.mbn, but i already have the updated bootloader. From what i've been reading, this new bootloader my not let you downgrade as it's locked (or partially locked, not sure)
So somebody on old baseband looking to upgrade to new baseband should try this out.
Click to expand...
Click to collapse
Ill try it for you
edit: failed sdi.mbn
deeznutz1977 said:
Ill try it for you
Click to expand...
Click to collapse
I doubt it will work for you either Deezothernutz. You will probably get the same (cannot xmit) error i ended up getting.
However, i did not change the file to a .zip and try running it in recovery
dragonstalker said:
I doubt it will work for you either Deezothernutz. You will probably get the same (cannot xmit) error i ended up getting.
However, i did not change the file to a .zip and try running it in recovery
Click to expand...
Click to collapse
Im still on the old bootloader
deeznutz1977 said:
Im still on the old bootloader
Click to expand...
Click to collapse
Awwww ok. well hopefully it works. It will take some of the strain off the people that can't get the full update.zip. Although, they know eventually they will need to download a rom based off NB4. Don't know what's going to happen when they try to update bootloader while still being on an MI7 rom.
What's the benefits of the new bootloader anyway?
^^^what he said
Sent from my SM-N900T using XDA Premium 4 mobile app
I think the focus is on the wrong thing . Everyone wants the modem not the bootloader. And from past experince with note 2 specifically the modem was made into a flashable zip.
The Demon Galaxy!
diamantericos said:
I think the focus is on the wrong thing . Everyone wants the modem not the bootloader. And from past experince with note 2 specifically the modem was made into a flashable zip.
The Demon Galaxy!
Click to expand...
Click to collapse
no,
some of us need the updated bootloader because the current wave of custom kernels doesnt play nicely with wifi calling and you cant run a KitKat kernel without the KitKat bootloader
3/7/14
dragonstalker said:
OK, people have been asking me for this, and I said I would extract the Bootloader and post it.
********************** THIS IS A TEST FIRST. DO NOT, I REPEAT DO NOT TRY TO ODIN THIS BOOTLOADER IF YOU ARE NOT EXPERIENCED. BRICKING YOUR PHONE, FLASH FLOODS, AUDITS, AND EX-GIRLFRIENDS KEYING YOUR CAR ARE NOT MY FAULT. YOU TRY TO ODIN BL OF YOUR OWN FREE WILL. **********************************************
ANY WHO,
Can somebody please flash this via Odin and make sure that it finishes the process. I'm still researching to see if you need a pit to flash the BL by itself.
THanks guys.
DOWNLOAD
RENAME BY REMOVING THE .md5
LOAD INTO AP ON ODIN
START
BL_N900TUVUCNB5
MD5SUM:ed3330d84eb5893f1235c71d581dfdda​
Click to expand...
Click to collapse
not finishing-fails
XmentalX said:
no,
some of us need the updated bootloader because the current wave of custom kernels doesnt play nicely with wifi calling and you cant run a KitKat kernel without the KitKat bootloader
Click to expand...
Click to collapse
I don't know about Wi-Fi calling but you can run Kitkat kernels with the old bootloader. Everything seems fine to me.
Techniques said:
I don't know about Wi-Fi calling but you can run Kitkat kernels with the old bootloader. Everything seems fine to me.
Click to expand...
Click to collapse
That kernel does not work with wifi calling
Sent from my SM-N900T using Tapatalk
Techniques said:
What's the benefits of the new bootloader anyway?
Click to expand...
Click to collapse
The only "benefit" is running the new TouchWiz kitkat builds with WiFi calling on the TMO network. The new bootloader is otherwise considered a downgrade.
diamantericos said:
I think the focus is on the wrong thing . Everyone wants the modem not the bootloader. And from past experince with note 2 specifically the modem was made into a flashable zip.
The Demon Galaxy!
Click to expand...
Click to collapse
+1
Would like to run the new modem if possible on the old bootloader.
If I have to update the bootloader to run the new modem, then I will do so...but MY main desire is to have the new modem. - I run AOSP, and those all work for either bootloader.
idtheftvictim said:
+1
Would like to run the new modem if possible on the old bootloader.
If I have to update the bootloader to run the new modem, then I will do so...but MY main desire is to have the new modem. - I run AOSP, and those all work for either bootloader.
Click to expand...
Click to collapse
i'll look into the flashable modem then sense people only want that. still trying to figure out why forcing the bootloader is not seeming to work
would like to see this bootloader working as I am planning to flash 4.4.2 via mobile odin and this bootloader via odin pc and hope that knox is not tripped while retaining root. Currently on 4.3 rooted with RDLV.
Sent from my SM-N900T using Tapatalk
hamsup1o said:
would like to see this bootloader working as I am planning to flash 4.4.2 via mobile odin and this bootloader via odin pc and hope that knox is not tripped while retaining root. Currently on 4.3 rooted with RDLV.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I keep seeing that mobile odin says it will trip the counter. Can anybody confirm that for me please.

update from SS odexed 4.1.1 to atleast 4.1.2??

Mods: i searched and searched but couldnt find a clear answer so i had to ask..
Need help updating my S3 that i have as my extra phone which i hardly ever used lately since upgrading to the note 2 then Note3
It's currently on rom : SS odexed Blue Holly Grail 2.5 LJ7 4.1.1 baseband LJ7
I haven't modded this phone in a very long time.. I see that there is now 4.4 roms available and been searching over and over on how to go from this rom to a higher version of android.. everything i keep finding is either outdated and links are no longer available.. or the options to update are from 4.3 to 4.4 but im still on 4.1.2
I also need to upgrade to atleast to 4.1.2 so that i am able to flash this phone to page plus and the steps/guide and programs that i will be using required that..
1) Do i need to go back to stock rom first ?
2) Is there a One click Odin zip to go back to stock
3) is there a One click Odin zip to upgrade ?
Dont really care about having to be rooted on this phone as this is just my second line and my NOTE 3 is properly customized...
Please help..
TIA.
Ma$etas said:
Mods: i searched and searched but couldnt find a clear answer so i had to ask..
Need help updating my S3 that i have as my extra phone which i hardly ever used lately since upgrading to the note 2 then Note3
It's currently on rom : SS odexed Blue Holly Grail 2.5 LJ7 4.1.1 baseband LJ7
I haven't modded this phone in a very long time.. I see that there is now 4.4 roms available and been searching over and over on how to go from this rom to a higher version of android.. everything i keep finding is either outdated and links are no longer available.. or the options to update are from 4.3 to 4.4 but im still on 4.1.2
I also need to upgrade to atleast to 4.1.2 so that i am able to flash this phone to page plus and the steps/guide and programs that i will be using required that..
1) Do i need to go back to stock rom first ?
2) Is there a One click Odin zip to go back to stock
3) is there a One click Odin zip to upgrade ?
Dont really care about having to be rooted on this phone as this is just my second line and my NOTE 3 is properly customized...
Please help..
TIA.
Click to expand...
Click to collapse
Start here since most ROMs require the KK bootloader:
http://forum.xda-developers.com/showthread.php?t=2741413
[STOCK ROM][4.4] ND8 Kitkat ROM
If you don't want stock but want TouchWiz I suggestThis awesome ROM:
http://forum.xda-developers.com/showthread.php?t=2750674
[ROM][ND8][4.4.2] Wicked X v8.0 [Updated 8/17/14]
mattzeller said:
Start here since most ROMs require the KK bootloader:
http://forum.xda-developers.com/showthread.php?t=2741413
[STOCK ROM][4.4] ND8 Kitkat ROM
If you don't want stock but want TouchWiz I suggestThis awesome ROM:
http://forum.xda-developers.com/showthread.php?t=2750674
[ROM][ND8][4.4.2] Wicked X v8.0 [Updated 8/17/14]
Click to expand...
Click to collapse
Do i need to go back to stock 4.1.1 before i can flash start doing the KK bootloader ?
Ma$etas said:
Do i need to go back to stock 4.1.1 before i can flash start doing the KK bootloader ?
Click to expand...
Click to collapse
No. Just odin the bootloader and flash a rom
EpicLordPhone said:
No. Just odin the bootloader and flash a rom
Click to expand...
Click to collapse
trying Rwilco's one click odin file but it just hangs.. i keep getting "program not responding" should i re download it again ?
I would redownload it and run it as administrator
Ma$etas said:
Do i need to go back to stock 4.1.1 before i can flash start doing the KK bootloader ?
Click to expand...
Click to collapse
No, just use Odin to flash the stock ND8 ROM, then flash your custom recovery. Boot into ROM ( it'll take a while ) update PRL and profile, then flash another ROM if you want
EpicLordPhone said:
I would redownload it and run it as administrator
Click to expand...
Click to collapse
redownloaded it and running as admin. but it still hangs
i get pass the check md5 sum
then i get program not responding on the top ..tab part
Does Odin work on windows 8?
Ma$etas said:
redownloaded it and running as admin. but it still hangs
i get pass the check md5 sum
then i get program not responding on the top ..tab part
Does Odin work on windows 8?
Click to expand...
Click to collapse
Hmm I dont know why it hangs.... But yes it works perfect on windows 8 for me
Can you show me the link of the odin your downloading?
EpicLordPhone said:
Hmm I dont know why it hangs.... But yes it works perfect on windows 8 for me
Can you show me the link of the odin your downloading?
Click to expand...
Click to collapse
when i get home i will try it on my windows 8 pc..
Im trying to go from 4.1.1. with custom rom straight to 4.4 with this One click ... am i doing the right?
Ma$etas said:
when i get home i will try it on my windows 8 pc..
Im trying to go from 4.1.1. with custom rom straight to 4.4 with this One click ... am i doing the right?
Click to expand...
Click to collapse
It sounds right. Let me know when you get home if it doesn't work! Good luck! :fingers-crossed:
EpicLordPhone said:
It sounds right. Let me know when you get home if it doesn't work! Good luck! :fingers-crossed:
Click to expand...
Click to collapse
Will do... thanks.. im taking off now ..once i get home i will get straight to this..
im using the one that is linked on here:
http://forum.xda-developers.com/showthread.php?t=2755793
which is found here :
http://rwilco12.com/downloads.php?d...L710)/Stock ROMs/KK/ND8/Full Restore/Unrooted
that is a good one right ?
Thanks so far for the help as well.
Ma$etas said:
Will do... thanks.. im taking off now ..once i get home i will get straight to this..
im using the one that is linked on here:
http://forum.xda-developers.com/showthread.php?t=2755793
which is found here :
http://rwilco12.com/downloads.php?d...L710)/Stock ROMs/KK/ND8/Full Restore/Unrooted
that is a good one right ?
Thanks so far for the help as well.
Click to expand...
Click to collapse
Yeah thats right. And no problem at all, just trying to do what id want others to do for me!
EpicLordPhone said:
Yeah thats right. And no problem at all, just trying to do what id want others to do for me!
Click to expand...
Click to collapse
awesome.. got home downloaded the Odin file.. ran it and it went through (pass) phone is now turned on , im going to let it sit for a few minutes before i start messing with it..
specially since im about to flash it to work on page plus..
Thanks. for the help once again ..
Ma$etas said:
awesome.. got home downloaded the Odin file.. ran it and it went through (pass) phone is now turned on , im going to let it sit for a few minutes before i start messing with it..
specially since im about to flash it to work on page plus..
Thanks. for the help once again ..
Click to expand...
Click to collapse
No problem at all! Good luck on flashing it to page plus!:thumbup:
Sent from my SPH-L710 using XDA Free mobile app

[UVS2EPG2-N910T] [UVU1COG2-N910T] Bootloader and Baseband ONLY

Since all I could find were the full ROM/firmware Odin packages for the new UVU1COG2, I extracted the bootloader and baseband/modem and made them separate Odin flash-able tar.md5 packages for those that may be interested in only updating these 2 and nothing else. (Example: I'm running CM 12.1, and want to keep it that way, but want to use the newer baseband & bootloader)
Download Link: https://www.androidfilehost.com/?w=files&flid=37084
N910TUVU1COG2_baseband.tar.md5 - SHA1: 247B957321EE5A72D439AA2BE05D9F462F492683
N910TUVU1COG2_bootloader.tar.md5 - SHA1: 244F4E55ED265BB14CD6A80409F862DC38E83D95
In ODIN 3.09+:
baseband goes in CP
bootloader goes in BL
Cheers.
-----
// EDIT
By popular request, I've done this for the newest UVS2EPG2 firmware as well. You can find them in the same download link.
N910TUVS2EPG2_bl_bootloader.tar.md5 - SHA1: 6E3E7061482C1AC37A11A6607C7B51631CAE2680
N910TUVS2EPG2_cp_baseband.tar.md5 -SHA1: F1790F6D00BD3039D87B5981E849E0DA15B861A9
thanks.
Thanks man!
Thank you been looking for this
Thanks! One question though...So if I want to stay on tekxodous 4.2 I just Odin OCG2 Baseband and Bootloader and I will keep my current configuration and data that I had on OCD6?
Sent from my SM-N910T using XDA Free mobile app
re: upgrade to TEKXodous rom
AriaNoob said:
Thanks! One question though...So if I want to stay on tekxodous 4.2 I just Odin OCG2 Baseband and Bootloader and I will keep my current configuration and data that I had on OCD6?
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
Not OCG2... You mean the COG2 bootloader and baseband, if
that's the case you are right...
Just odin flash the two files before flashing the tekxodus upgrade
and be sure to do a full wipe and factory reset before odin flashing..
Good luck,
Have a great day!
Misterjunky said:
Not OCG2... You mean the COG2 bootloader and baseband, if
that's the case you are right...
Just odin flash the two files before flashing the tekxdous upgrade
and be sure to do a full wipe and factory reset before odin flashing..
Good luck,
Have a great day!
Click to expand...
Click to collapse
Lol COG2 yes!
Sent from my SM-N910T using XDA Free mobile app
Really nice. Thanks just flashed them
Perfecto
Flashvetrin
thanks
Thank you for your wonderful work
I already soft brick my note 4 once. Sorry if this comes of a stupid question, is there a more detailed tutorial on how to do this?
shawnsac2000 said:
I already soft brick my note 4 once. Sorry if this comes of a stupid question, is there a more detailed tutorial on how to do this?
Click to expand...
Click to collapse
Put your device into download mode
Start odin put the modem tar in the pda slot hit start.
Do the same thing for the bootloader.
Very easy I did this ontop of a 5.02 zero issues..
Flashvetrin
Can I do both same time or reboot in between?
shawnsac2000 said:
Can I do both same time or reboot in between?
Click to expand...
Click to collapse
I did them one at a time.. ontop of COD6 is what I did.. using odin 3.07.
Easypeasy[emoji16]
Flashvetrin
Can you safely downgrade your baseband? I keep reading that COG2 is recommended, but my Note 4 already has DOFC.
Also is COG2 just recommended because of Wifi calling?
re: downgrading
Craigerade said:
Can you safely downgrade your baseband? I keep reading that COG2 is recommended, but my Note 4 already has DOFC.
Also is COG2 just recommended because of Wifi calling?
Click to expand...
Click to collapse
You can easily downgrade dofc/dog1 to cog2, cod6 or even nk4 kitkat
by simply doing a full wipe and odin flashing either of those firmwares.
Before odin flashing any firmwares be sure to have a copy of your favorite
custom zip file rom on your external or internal sdcard.
After odin flashing the firmware you have chosen out of those 3 firmwares
simply odin flash twrp recovery, then do a full wipe including factory reset.
No need to re-root because all zip file roms are pre-rooted.
Then simply twrp flash the zip file rom which you have copied to the phone.
COG2 is the latest firmware which has wifi calling working properly
unless you flash any of the dofc/dog1 zip file roms, if you flash any
of the dofc/dog1 roms the wifi calling feature will not work at all.
Good luck,
Have a great day!
I'm on deathstalker rom cod6.if I updated these can I still rock the rom or have to get a different one?
BRANDENDEUCE said:
I'm on deathstalker rom cod6.if I updated these can I still rock the rom or have to get a different one?
Click to expand...
Click to collapse
Upgrading your modem and bl will have no affect on jovys build..
COD6.... darthstalker
Flashvetrin
Flashvetrin said:
Perfecto
Flashvetrin
Click to expand...
Click to collapse
So I'm still on NK4 running the Bobcat themed DynamicKat rom. I tried the whole ODIN COG2 then DynamicPop and all was good until I tried to restore my phone back to DynamicKat.
I decided I didn't like not having a theme like I had and presently don't have the time to make anything so all I am trying to do now is have COG2 Bootloader/Baseband but running on KitKat. I feel like I might be missing a step somewhere so if anyone could help that would be appreciated!
Ser0mancerXXIV said:
So I'm still on NK4 running the Bobcat themed DynamicKat rom. I tried the whole ODIN COG2 then DynamicPop and all was good until I tried to restore my phone back to DynamicKat.
I decided I didn't like not having a theme like I had and presently don't have the time to make anything so all I am trying to do now is have COG2 Bootloader/Baseband but running on KitKat. I feel like I might be missing a step somewhere so if anyone could help that would be appreciated!
Click to expand...
Click to collapse
If you could install "samsung info".
And post a screenie of "firmware".
Then we can see infact what bl and baseband and such You've got..
Flashvetrin

Categories

Resources