Code:
I am NOT responsible for bricked devices, dead SD cards, thermonuclear war
or the current economic crisis caused by you following these directions.
YOU are choosing to make these modifications, and if you point the finger at me
for messing up your device
I will laugh at you.
see the second post for more information
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use:
For stock or custom rom based in stock 4.3 FW 10.4.B.0.569 or 10.4.1.B.0.101 and 4.4 FW 10.5.A.0.230 or 10.5.A.0.233
NOTE:
For users of the new firmware, there were changes in the kernel of 10.4.B.0.569 for 10.4.1.B.0.101! Screen rotation does not work!
Installation:
Flash via recovery
or
extract boot.img and flash via fastboot
Important note:
The version 5 and more newer
was replaced mpdecision by AutoSMP, I added a script to zip by removing dependencies mpdecision, then it is highly recommended to install via recovery, otherwise you will get two hotplug controllers, which will cause problems!
Please, do not mirror!
Downloads:
*For 4.4.2 KitKat
78Kernel_v5 10.5.A.0.233
78Kernel_v4 10.5.A.0.233
78Kernel_v3 10.5.A.0.233
78Kernel_v2 10.5.A.0.233
78Kernel_v1 10.5.A.0.230
*For 4.3 JellyBean
78Kernel_v4.2 10.4.1.B.0.101
78Kernel_v4.1 10.4.1.B.0.101
78Kernel_v4 10.4.1.B.0.101
78Kernel_v3 10.4.1.B.0.101
78Kernel_v2 10.4.B.0.569
78Kernel Release 10.4.B.0.569
* Only 4.3!
If you come from another custom kernel such as DoomKernel is required to install the proper drivers WIFI
If you come from the stock kernel is not necessary flash
Flash this - Thanks for @TAL333 for tests
Bugs:
Indicate possible problems
Tips:
For Overclock:
For people who use overclock, and the necessary modification of a rom file "sysmon.cfg"
This kernel has overclock up to 1.7GHz
then you should use this:
Flash via recovery sysmon.cfg Overclock 1728000
Note: If you use overclocked other frequency is necessary to modify sysmon.cfg for equivalent frequency
and obviously, if you do not overclock is not necessary to modify sysmon.cfg
Because modify sysmon.cfg?
Because without it the max frequencies not stick in all cores
For people who do want DoubleTap2Wake:
Use this app created by @Soheil_rf, thanks for this :good:
or
Flash this:
Enable DoubleTap2Wake
aaah, but I want to not use it, and now?
Go in /system/etc/init.d and remove 78DoubleTap2Wake
and restart
Summary of activities
Stable version
78Kernel on github
Enjoy and press the Thanks button if you like!
ChangeLog:
NEW! 78Kernel v5 KitKat
Removed MPdecision, substituted by AutoSMP (incredible gain battery life without losing performance) (updated)
Force the other cores to match CPU0 when changing frequency or gov
New personal CPU freq table with overclock
Add init.d folder
Maximum frequency increased to 1566MHz on boot (accompanies the change in sysmon.cfg)
Add smartmax CPU governor
ramdisk changes:
Updated CWM 6.0.4.6 to 6.0.5.0 (thanks to @[NUT])
Updated TWRP 2.6.3.0 to 2.7.1.0 (thanks to @[NUT])
Removed MPdecision dependencies
Replaced CWM by Philz Touch recovery 6.48.4
78Kernel v4 KitKat
USB force 500Ma charging current on unknown chargers
Tune overclock for best performance
Kernel sched optimization
Use XZ kernel compression (smaller size kernel)
Set min and max frequencies on boot (384/1512)
New personal freq table with revisited vdd levels (run so smooth)
Overall vibration softer modified by default (besides being sexier also preserves battery)
Disable some debug
Tune read_ahead_kb for 512
Add TripNDroid scheduler and set as default scheduler
and more ...
check my github for details
ramdisk changes:
LED warning enter recovery changed to yellow (for a change )
Vibration warning enter recovery get softer and shorter
Add file modified for perfect functioning overclock (in first post)
78Kernel v3 KitKat
Removed cpu governor conservative, gov_msm, ondemand, powersave and userspace
Removed test and noop, add deadline and row, set row as default scheduler
Compiler optimizations
Optimize slub
My custom Overclock MSM APQ8064 up to 1728MHz with mod vdd_levels (Not undervolt as in other versions)
78Kernel v2 KitKat
Compiled from sources Sony firmware 10.5.A.0.233
Added implement sysfs interface for vibration intensity (read this post for use)
Note: ramdisk from firmware 10.5.A.0.230
78Kernel v1 KitKat
Compiled from sources Sony firmware 10.5.A.0.230
Clean ramdisk from firmware 10.5.A.0.230
*Same features coming from the previous version
78Kernel v4.2
Revert - remove FIOPS I/O scheduler (set CFQ as default)
Disable test-iosched
Disable MMC_BLOCK_TEST
Kernel undervolted for default in 100mV
Decreased MIN undervolt value for 700mV
78Kernel v4.1
Tweak mount all partitions noatime/nodiratime
Reduce buffer size for free some ram
Add FIOPS I/O scheduler (set as default)
Tune read_ahead_kb for 256
78Kernel v4
Add support for control CPU voltage vdd_levels
Add 192Mhz freq slot (775 mV)
Revert LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUES, MSM_DCVS, FAST_RUN and SCHED_MC
78Kernel v3
Compiled from sources Sony firmware 10.4.1.B.0.101
Rebuild ramdisk and removed logo.rle in ramdisk
Tweak for battery
Add DoubleTap2Wake based native sony thanks to @championswimmer
Disabled MSM_DCVS governor
Disable LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUES (you can now have full control over ADJ values, for tuners like me or supercharger users this is very useful)
The current version was built from scratch, some features found in previous versions may not be present
To complete changelog check github commits
78Kernel v2
Added DoubleTap2Wake generic
78Kernel Release
Compiled from sources Sony firmware 10.4.B.0.569
Build-in wifi modules
Add ROW I/O scheduler (default CFQ)
Fix CFQ I/O scheduler
Dual recovery CWM-6.0.4.6 / TWRP-2.6.3.0 (vol up - CWM / vol down - TWRP) (coming for DoomKernel v20)
Added optimizations for compiling - Thanks to @franciscofranco
Init.d suport (Set proper permissions 777 to scripts)
Debugging enabled by default
Disable debugging notification icon in the status bar
Kernel insecure (ro.secure=0)
Clean ramdisk from firmware 10.4.B.0.569 Xperia ZL-ZQ
Thanks to:
Sony
DooMLoRD for Tutorial Kernel building instructions for Xperia devices and some patches and recovery
iamsuperuser by ruthless aid
waallace for help with Ubuntu Linux
Congrats bro!!
Time to unlock BL and flash it...
nice one man thank you
running well on c6503 eXistenZ Rom
Sent from my C6503 using Tapatalk
Nice, i going to test :3 thx
awesome
great to see more development for this device :victory:
gonna test and report
ps.. i know too soon to ask..but any possibility of implementing dual boot ?
ask
[ASK]
Is it works on C6502 JB 4.3 ???
i just want to make sure...
@Gustavo RD78 > Thanks for your work.
for future update please add some more feature...
i just buy this phone last night and update from jb 4.1.2 to 4.3.
THANKS.
serajr said:
Congrats bro!!
Time to unlock BL and flash it...
Click to expand...
Click to collapse
gonemad02 said:
nice one man thank you
running well on c6503 eXistenZ Rom
Sent from my C6503 using Tapatalk
Click to expand...
Click to collapse
darkevangelion said:
Nice, i going to test :3 thx
Click to expand...
Click to collapse
xyge said:
awesome
great to see more development for this device :victory:
gonna test and report
ps.. i know too soon to ask..but any possibility of implementing dual boot ?
Click to expand...
Click to collapse
nebixts said:
[ASK]
Is it works on C6502 JB 4.3 ???
i just want to make sure...
thanks.
i just buy this phone last night and update from jb 4.1.2 to 4.3.
Click to expand...
Click to collapse
Thank you all for the comment :good:
I will investigate if it is possible to dualboot, anything I'll post here
since our apparatus is capable of installing a kernel by itself (via recovery) which is very fast and easy, it would not be very important
The idea is to have a lightweight and stable kernel
That's it friend this is for stock or custom rom based in stock 4.3
Then go deep!
Feature requests?
Hey D78,
this Kernel runs my phone quite a while now and while I am missing some features from doomkernel I am pretty happy about it as it is just everything working.
Do you take feature requests? It would be great to have doubletaptowake on this kernel
would you do that?
Greetings
keenofhiphop said:
Hey D78,
this Kernel runs my phone quite a while now and while I am missing some features from doomkernel I am pretty happy about it as it is just everything working.
Do you take feature requests? It would be great to have doubletaptowake on this kernel
would you do that?
Greetings
Click to expand...
Click to collapse
+1
Sent from my C6506 using Tapatalk
keenofhiphop said:
Hey D78,
this Kernel runs my phone quite a while now and while I am missing some features from doomkernel I am pretty happy about it as it is just everything working.
Do you take feature requests? It would be great to have doubletaptowake on this kernel
would you do that?
Greetings
Click to expand...
Click to collapse
butatx said:
+1
Sent from my C6506 using Tapatalk
Click to expand...
Click to collapse
Of course I accepted opinions
Here we go! :good:
Excellent work! And what about UNDERVOLTING ?
Maxim1608 said:
Excellent work! And what about UNDERVOLTING ?
Click to expand...
Click to collapse
Since I got my phone I have not moved in OC UV 'll take a look at this point and return here if something is really good for use :thumbup:
Send from my Xperia ZL
Gustavo RD78 said:
Since I got my phone I have not moved in OC UV 'll take a look at this point and return here if something is really good for use :thumbup:
Send from my Xperia ZL
Click to expand...
Click to collapse
And underclocking? If you would extend the frequency table to 192 MHz it would cause a noticeably better battery performance.
I myself would wish a intelli_plug, eco-mode and intelli_demand governor as well, but that's a lot to do and I'm premierement thankful to have a working kernel with recovery
Greetings
Von meinem Sony Xperia ZL gesendet.
keenofhiphop said:
And underclocking? If you would extend the frequency table to 192 MHz it would cause a noticeably better battery performance.
I myself would wish a intelli_plug, eco-mode and intelli_demand governor as well, but that's a lot to do and I'm premierement thankful to have a working kernel with recovery
Greetings
Von meinem Sony Xperia ZL gesendet.
Click to expand...
Click to collapse
I tried to add intelli-plug, but got compilation errors, need to dig to find the cause of the problem
However I have extended the table add 192000 MHz freq One thing I noticed is that only CPU0 (first core) running this frequency, perhaps this could be normal, but I think all colors have to get this freq
you know please tell me something more about it?
Att Gustavo RD78
Gustavo RD78 said:
I tried to add intelli-plug, but got compilation errors, need to dig to find the cause of the problem
However I have extended the table add 192000 MHz freq One thing I noticed is that only CPU0 (first core) running this frequency, perhaps this could be normal, but I think all colors have to get this freq
you know please tell me something more about it?
Att Gustavo RD78
Click to expand...
Click to collapse
I don't know but I think that mpdecision switches unneeded cores off, so at the minimum minimum (the really lowest) frequency, which is in your table then 198000 Hz, there would in every case be only one active core. Is that plausible?
It would be interesting if that occurs a well if you add overclock frequencies.
Greetings
Von meinem Sony Xperia ZL gesendet.
keenofhiphop said:
I don't know but I think that mpdecision switches unneeded cores off, so at the minimum minimum (the really lowest) frequency, which is in your table then 198000 Hz, there would in every case be only one active core. Is that plausible?
It would be interesting if that occurs a well if you add overclock frequencies.
Greetings
Von meinem Sony Xperia ZL gesendet.
Click to expand...
Click to collapse
since we have hotplug enabled by default...
I do not think, just believe it would become more fluid in the lower freq 192000 in all colors after a high freq
Caution!
NOTE:
For users of the new firmware, there were changes in the kernel of 10.4.B.0.569 for 10.4.1.B.0.101! Screen rotation does not work, we are waiting for the release of source code for new construction
Edit:
I found a way around this, for those who desire advanced kernel for new firmware
touch error on my c6502
i found an error, touch not responding after using your kernel for few hours...
razz2503 said:
i found an error, touch not responding after using your kernel for few hours...
Click to expand...
Click to collapse
hello,
Wrong! This bug does not exist, check if the problem is not in your rom
Att Gustavo RD78
Send from my Xperia ZL
Related
Yes, this is yet another (shameless) attempt to optimise the kernel for our Galaxy-S (i9000) by taking tweaks implemented by various xda developers. The aim at this moment is to 'integrate' all the desirable tweaks, since I'm still grasping the ins and outs of Linux kernel to experiment some of the possible tweaks myself.
Not sure how far I would bring this thread forward, because I will be working on a project (my day job) very soon again, so I'm going to enjoy/do while I can.
Key Implementation
based on JPM kernel
sztupy's Universal Lag Fix (v0.3)
hardcore's Free Memory config (341MB)
raspdeep's Overclock (v1.1)
hardcore's SpeedMod (Tweaks + Compiler Optimisation) with Jhash update
supercurio Voodoo Display tweak (Gamma Correction and Improve Sharpness)
neldar's Backlight Notification (BLN, v2.2, enabled via ULF in recovery mode)
Budget Fair Queuing (BFQ) I/O Scheduler
I also made some minor modification to other codes to experiment the overclock enhancement. It's in this build but may not have any effect.
Please refer to this link for the latest download
See this video of my Galaxy S running on Ya-OK kernel. Video playback, internet browsing, gaming, UI navigation.
attached is the screenshot of quadrant, on a JPM-based ROM with EXT4 on all partition.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS
in no order of priority.
supercurio
sztupy
raspdeep
hardcore
neldar
and rest of folks in xda-developers who have contributed one way or another
DOWNLOAD HISTORY
v1.50 (build 38) - 8th December
Updated Overclock to 1.12GHz
Updated Kernel Scheduler parameter (sched_min_granularity_ns & sched_wakeup_granularity_ns) to give more priority to foreground application, therefore improving the fluidity of the UI experience. From brief research, these are the key parameters used to tune kernel between a server (therefore higher values) and a desktop.
CWM version available here
v1.45 (build 35) - 5th December
Fixed stability issue in v1.40 by reverting to the voltage profile used in v1.2b.
v1.40 (build 34) - 28th November
Added BFQ (Budget Fair Queuing) I/O Scheduler and set BFQ as the default I/O Scheduler. The aim is to boost I/O throughput, reduce the latency. Please refer to this site for more information
v1.31 (build 31) - 24th November
Bug fix on /system mount to prevent filesystem corruption in /system
Does not include fix, please refer to supercurio's thread on how to correct the corrupted filesystem if you are encountering problem with your device.
v1.3 (build 30) - 20th November
Refined voltage level for cpu frequency 100/200 MHz. Effectively, reduce 75mV for 100/200, and 25mV for 400/800 (same as 1.2b). Again not user configurable for now, though I may implement it if people are finding the UV feature is causing unstability.
Upgraded Backlight Notification (BLN) to v2.2 (Please test and feedback)
Minor optimisation on kernel configuration (PREEMPT_VOLUNTARY, UACCESS_WITH_MEMCPY)
v1.2b - 2nd November (2585 downloads)
Refined voltage level for cpu frequency 100/200 MHz. Effectively, reduce 50mV for 100/200, and 25mV for 400/800. Again not user configurable for now, and once raspdeep released his UV code I may implement it if people are finding the UV feature is causing unstability.
v1.2a - 31st October (668 downloads)
Implemented lower voltage for cpu frequency 100/200/400/800MHz.
Note: Not user configurable
v1.1 - 30th October (1168 downloads)
Implemented Voodoo Display Sharpness & Color Gamma
v1.0 - 29th October (759 downloads)
Implemented Universal Lagfix, Overclock, Memory optimization, etc
Additional minior OC tweaks.
FREQUENTLY ASKED QUESTIONS
Does it have a recovery of some sort built in then. Maybe CWR..
Universal Lagfix Kernel (ULK) comes with Clockworkmod so yes it has the recovery function!
Does this works on my XXX ROM?
This kernel is compiled based on the available Froyo JPM source, so it'll definitely work on JPM-based ROM (custom or stock). For the rest of Froyo ROM, it has been reported that YA-OK is compatible with the following Froyo-based firmwares; JP6, JPO, JPP, JPD, JPA (all the above are based off Android 2.2 kernel) JPU ROM is however not supported at this moment. (See next FAQ point for more information)
Does this work on JPU-based ROM? When will you support it and/or Why does XXX kernel support JPU and not yours?
JPU-based ROM is apparently based on Android 2.2.1 firmware. Since the YA-OK kernel is based on version 2.2.0 kernel, there is a high chance YA-OK will not work well with JPU-based ROM. I have not tried personally myself but from what has been reported by other users, this does not work. Only when Samsung release the source code for JPU will YA-OK be able to support JPU (and later) ROM. As to why other kernel developers has already started releasing kernel to supporting JPU-based ROM, they are merely injecting lagfix and tweaks into the kernel through initramfs, instead of the tweaks that require source code modification (e.g. Overclocking, Undervolt, Display Fix, Kernel optimization through compiler optimization).
Please refer to supercurio post for more information
I installed this kernel on a JPO-based ROM. But it seems that there are no changes, reported RAM is 341 mb but Quadrant is about 1000.
You need to enable lagfix yourself by going to recovery mode, and select ULK option for all the possible choices of lagfix.
If I install this kernel on my rom, is it still necessary for me to install "voodoo"?
All the tweak and optimisation features mentioned in this thread are implemented within the kernel, so flashing or updating another kernel will lose whatever features found in YAOK kernel unless the said feature is also implemented in the other kernel. In the case of lagfix, it is important that if you flash another kernel over YAOK (for whatever reason), you need to be sure that kernel supports the relevant lagfix feature otherwise your phone may not boot.
I face alot of FC (Force close) with your kernel, what's wrong?
One of the common cause for the "FC" problem, particularly with custom kernel, is that you has chosen to enable the BIND option in the Lagfix setting. You should turn that off, and observe further if the FC issue stil persists.
How do I install this kernel?
First of all, make sure you have a compatible Froyo firmware (refer to above for a list of compatible firmware)
To install this kernel, download and unzip the zip file. Flash the .tar file using Odin, without selecting re-partition and you can omit the PIT setting.
After updating v1.31 (build 31), my Galaxy gets stuck at the bootscreen. What happens?
This is a sign of corrupted file system on the /system partition. Try this one time fix procedure
flash back v1.30 build 30
boot to recovery, do a backup
flash v1.31 build 31
boot to recovery, do a advance restore on /system
still at recovery, go to CWM and wipe davik cache
reboot your device (you may have to wait a few minutes for the system to rebuild the davik cache)
I was playing/running XXX game/application, the screen freezes halfway, what gives?
From experience, some applications (game or graphic intensive application such as video playback application) may not handle overclock feature very well, especially if the application rely solely on CPU (the main processor for computing process needs other than graphics), instead of GPU (the processor dedicated for graphic processing needs), to render graphics. In particular, Rock player seems to have problem handling video playback via software mode (instead of hardware), for HD video. This is understandable given that constant overclocking is usually undesirable. Remember our device can do dynamic CPU frequency scaling, which means it will never always run at overclocked frequency unless you manually set it to be.
Some games such as Asphalt were reported to freeze the device but from my observation, it is very rare it happens and I would usually would not bother about that. If it really bothers you, just set the CPU scaling threshold to 1GHz (instead of 1.12GHz or 1.2Ghz) via SetCPU app. Personally I won't bother and I think you should do the same. Afterall, it is probably a bad app out of many apps installed that is causing the problem, so why cripped your phone permanently for that?
Great to see these projects coming from fellow Singaporeans
No UV support?
lol @ the name - there seem to be more kernels than ROM. Thanks to all those devs too and good luck with yours - seems to be the kitchen sink here
Does it have a recovery of some sort built in then. Maybe CWR..
Sent from a Voodoo Doctor Edition I9000M via xda app.
kalpik said:
No UV support?
Click to expand...
Click to collapse
sorry no UV support yet.
opensourcefan said:
Does it have a recovery of some sort built in then. Maybe CWR..
Sent from a Voodoo Doctor Edition I9000M via xda app.
Click to expand...
Click to collapse
check the FAQs!
Does this use latest hardcore´s changes?
Otherwise - great stuff, all-in-one, thank you!
BTW quadrant benchmark is only a number, but with jfs overkill is my score about 2200...
Which version of hardcore's kernel mod does it include? Is it possible that You add 1000hz version? By the way great work!
vanahaim said:
Does this use latest hardcore´s changes?
Otherwise - great stuff, all-in-one, thank you!
BTW quadrant benchmark is only a number, but with jfs overkill is my score about 2200...
Click to expand...
Click to collapse
Quadrant is still useful when you look at the score for each component. It is meaningless when you look at overall score of a lag fix device esply with oclf.
Sent from my GT-I9000 using Tapatalk
That is an awesome name !! LOL
Sent from my GT-I9000 using XDA App
LockeOn said:
Which version of hardcore's kernel mod does it include? Is it possible that You add 1000hz version? By the way great work!
Click to expand...
Click to collapse
It uses the latest memory config, with most of the optimized compile flags, jhash3 mod, using -O2 with 500hz.
Sent from my GT-I9000 using Tapatalk
zenkinz said:
It uses the latest memory config, with most of the optimized compile flags, jhash3 mod, using -O2 with 500hz.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Could you also add to description if it supports JFS? Many people are using it as a lagfix.
Hello
Do I need to disable Lagfix before install this Kernel ? Can i Install it within CMW ?
thx
is it real voodoo.. or do you mean the voodoo option inside the lagfix? becasue that just "voodoo style" lagfix
So I tried this kernel. Asphalt5 - played one level OK, Dungeon Hunter - after 1min or so, hangs
zenkinz said:
It uses the latest memory config, with most of the optimized compile flags, jhash3 mod, using -O2 with 500hz.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I love hardcore's work. I am going to try this one.
vitalij said:
So I tried this kernel. Asphalt5 - played one level OK, Dungeon Hunter - after 1min or so, hangs
Click to expand...
Click to collapse
Can anyone confirm this? I have all gameloft's games so this is a problem for me if it's true.
vitalij said:
So I tried this kernel. Asphalt5 - played one level OK, Dungeon Hunter - after 1min or so, hangs
Click to expand...
Click to collapse
unfortunately I dont have Dungeon Hunter to try. is there a demo version?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ladies and Gentlemen, welcome to my latest kernel ELiTE edition!
Get ready for the most battery life, the best performance and the most fps in-game!
The goal of this kernel is to be atleast as stable as Sony's stock kernel, while delivering a better performance and battery life.
This is mainly accomplished due to Swap, CleanCache, ZCache, ZRam, which help to reduce the I/O load and give you more free memory for multitasking. The battery consumption should not be worse compared to Sony's stock kernel, while I am achieving more performance due to making full usage of the Qualcomm Resource Power Manager (RPM).
To save additional battery, I recommend switching to either the 'intellidemand' or 'badass' governor for the best battery life.
To get the most performance out of this, I'd recommend to switch to the 'lagfree' governor.
Click to expand...
Click to collapse
FEATURES
CPU OVERCLOCKING UP TO 1.7 GHZ
MORE GOVERNORS
MORE SCHEDULERS
MORE TWEAKS
MORE BATTERY LIFE
SWAP
ZRAM
ZCACHE
CLEANCACHE
VOLTAGE CONTROL
CWM RECOVERY
GOVERNORS
OnDemand
Userspace
Powersave
Conservative
Performance
Lagfree
Lazy
Intellidemand
Badass
SCHEDULERS
No-op
Deadline
CFQ
SIO
VR
CREDITS
Dennis Rassmann (showp1984)
Paul Reioux (faux123)
Yoann Laissus (arakmar)
INFO
If requested, a CyanogenMod version will be done.
I am working on including the TWRP recovery (Team Win Recovery Project).
I seriously don't feel a need to overclock the GPU (Adreno 220), but if requested, I will look into it.
If the hardware doesn't make it impossible, there's hardly anything I can't do. Just be brave and give me constructive feedback!
SOURCE
A full source code, with actually understandable commits can be found HERE
Downloads +++ Changelog
DOWNLOADS AT GOO.IMhttp://goo.im/devs/RaymanFX/downloads/ELiTE/Xperia_S
CHANGELOG
V2
Code:
*Compatible with Sony Stock Roms and MIUI
*WiFi BCM4330 fixed
*Adreno220 2D/3D overclocked
*CPU/GPU bandwith increases
*Additional CPU freq @ 1.7 GHZ
*increased voltages
V1
Code:
*Initial Release
*Based on Sony's .55 source release
*Compatible with Sony Stock Roms and MIUI
*Awaiting user's feedback
*^if requested, a CM version can be done
Yeeeeees!!! a new kernel finally for ICS!!!! will try It of course.
Thank youuu
woot !!
new kernel !!
testing it now !!
thanks.
will give this a try..and give feedback.... nice....
and yes..a cm10 kernel would be great...
Regards
Great news, a new kernel, thanks! I've already flashed it on XTXperience v7 and booted with no problems - cleaned cache & dalvik cache before flash. So far seems snappier, governor is intellidemand and antutu score is 8740. Will post feedback when I use it for a couple of days. I was on Stock+ kernel.
Sent from my LT26i using Tapatalk 2
Just to make it clear,
is this just for the unlocked bootloader or is it also possible to flash while on locked bootloader?
thanks!
omasis said:
Just to make it clear,
is this just for the unlocked bootloader or is it also possible to flash while on locked bootloader?
thanks!
Click to expand...
Click to collapse
You can't flash kernels with locked bootloader.
Felimenta97 said:
You can't flash kernels with locked bootloader.
Click to expand...
Click to collapse
kk thank you!
WiFi not turning on. I am using XTX7 UB.
Besides that, kernel works great. I don't have any other issues so far.
fchaudhri01 said:
WiFi not turning on. I am using XTX7 UB.
Besides that, kernel works great. I don't have any other issues so far.
Click to expand...
Click to collapse
same here
another thing is that i can't find is where to change governor
everything else is fine
moe18 said:
same here
another thing is that i can't find is where to change governor
everything else is fine
Click to expand...
Click to collapse
Use app like setcpu. It allows you to change governor and scheduler.
AnTuTu CPU Master free also allows you to change governor. It says "Scaling" instead of governor and scheduler comes under Advanced settings tab.
Hope that helps.
For those who have wifi problem, try flashing stock wifi module.
Flash this: https://www.box.com/shared/0wjj7myr79u5ezipm0yc
Thanks me if i helped!xD
Send from my stupid lt26i
I'm on xtx7.
just flashed the kernel. no wifi problem here.
monivan said:
For those who have wifi problem, try flashing stock wifi module.
Flash this: https://www.box.com/shared/0wjj7myr79u5ezipm0yc
Thanks me if i helped!xD
Send from my stupid lt26i
Click to expand...
Click to collapse
That fixed it for me. Wonder why it happened for me and not for the person above me? Anyways, all is well now.
Thanks for the kernel...
And yes a cm10 version will also be great with TWRP recovery in both kernels...
Sent from my Xperia S using xda premium
Need Help
I flashed the Kernel. After reboot a encounted the same wifi problem. But solved it with flashing the Wifi module.zip. Thanks to the Uploader.
I set the maximum cpu speed and lagfree governer. And What about " SCHEDULERS". ? What is the use of that ? Which one should i set ? I am using Setcpu... Pls reply.. Thanks in advance
Wow great kernel I will feedback soon, YES a CM9.1 kernel Please????
Sent from my LT26i using xda premium
monivan said:
For those who have wifi problem, try flashing stock wifi module.
Flash this: https://www.box.com/shared/0wjj7myr79u5ezipm0yc
Thanks me if i helped!xD
Send from my stupid lt26i
Click to expand...
Click to collapse
Ya k, I forgot to include the stock wifi module it seems.
By default, my kernel loads the module in /system/lib/modules/bcm4330.ko, which can lead to problems if you don't have the stock wifi modules.
TWRP seems to still be causing some issues... will look into it for sure. I am currently working on Android 4.2, got it booting up already, but there are some libs that need to be fixed.
If anybody's interested, I upgraded to a working CWM 6.2 Recovery and the CM10 kernel is on its way.
rajeevxperia said:
I flashed the Kernel. After reboot a encounted the same wifi problem. But solved it with flashing the Wifi module.zip. Thanks to the Uploader.
I set the maximum cpu speed and lagfree governer. And What about " SCHEDULERS". ? What is the use of that ? Which one should i set ? I am using Setcpu... Pls reply.. Thanks in advance
Click to expand...
Click to collapse
You might want to use Antutu CPU Master from the Play Store and go to the 'advanced' tab. There you can change your I/O scheduler, which can finally result in much better I/O performance, rad-and-write improvements which can have a massive effect on games, file copying, reading or whatever. Just try and you'll find out soon what suits you best
Might be a stupid question, but would this kernel work in JB MIUI? (ie. the newest MIUI posted here on the Xperia S forum.)
I'm assuming it doesnt since this is for ICS, but thought I'd ask before I'd try it out while I'm at work. Especially since it just said MIUI.
thanks regardless of the answer
Code:
[COLOR="Red"][SIZE="4"]* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems[/SIZE][/COLOR]!
Ironbuang-Systems Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
another new kernel joins the development for our beloved Xperia M (YEY)
so i havent really done anymore serious kernel developments in a long time, last was galaxy y where i had help with a lot of great devs, tried with mediatek chips but gave up, now i got an xperia M for the new year and i compiled my own kernel to satisfy what i want from my phone and then i just decided to share it in case you guys might wanna give it a try too
WHATS IN IT
Code:
compiled from 15.1.C.2.9 kernel sources
patched to [COLOR="Blue"]3.4.4[/COLOR] kernel
[STRIKE]linaro GCC 4.6.2 toolchain[/STRIKE][COLOR="Blue"]Now compiled with Linaro 4.7.4 toolchain[/COLOR]
compiled with O2 optimizations
CPU OC to 1.2ghz (has a weird issue though of capping max freq back to 972mhz sometimes especially when running a benchmark, still looking to solve it)
GPU OC to 450mhz (badass constant 25fps on antutu 3d gpu benchmark was the highest i ever achieved)
6 cpu givernors
[LIST=1]
[*]interactive
[*]conservative
[*]userspace
[*]powersave
[*]intellidemand*default*
[*]performance
[/LIST]
5 ioscheds
[LIST=1]
[*]noop
[*]deadline
[*]row *default*
[*]cfq
[*]sio
[/LIST]
swap & zram enabled
XZ compressed
CWM 6.0.4.5
vmreadahead set to 1024
NTFS support, now you can mount even your NTFS formatted flashdrives (needs OTG helper to mount or some app but no need for modules since its now built into the kernel)
allow externally powered USB host devices
minimum brightness lowered
more will be added soon, just check the commits to see, it will tell you what more features i have added or removed
HOW TO INSTALL
BOOTLOADER MUST BE UNLOCKED
ADB & FASTBOOT ALONG WITH XPERIA M DRIVERS MUST BE INSTALLED IN YOUR
run this command from cmd
Code:
fastboot flash boot ironbuang.img
now this
Code:
fastboot reboot
wait for phone to boot and enjoy
changelogs
I am not really a fan of editing this thread for changelogs, but instead all changelogs can be viewed at my GIT, the commits are the changelogs
DOWNLOAD LINK
STABLErelease 3.0.2
changelogs
BLEEDING EDGE 3.4.5 Kernel
BLEEDING EDGE INFO
3.4.5 Kernel
WIFI is broken
OTHER ISSUES MIGHT EXIST, I JUST DONT KNOW AS I REVERTED BACK TO 3.4.4,
FEEL FREE TO GIVE IT A TRY THOUGH
BUGS
Code:
[STRIKE]ROW IOSCHED is still buggy right now, causes an unresponsive system for a duration of time or SOD's the phone when it is sleeping, better now in 2.5 than before but still buggy[/STRIKE] [COLOR="Red"]FIXED[/COLOR]
Code:
PEGASUSQ GOVERNOR, was built with a section mismatch, using it as default governor via kernel config will freeze and reboot system on boot, using other governors as default and setting pegasusq using 3rd party apps works fine though as a workaround for now
Credits
alvinhochun for cwm
icoolguy1995 for some discussion regarding OC
varun.chitre15 for some of his commits
ansebovi for 450mhz gpu commit
doomlord for his toolchain i no longer use his toolchain
faux123 for some of his commits as well
source
Ironbuang Kernel
XDA:DevDB Information
Ironbuang-Systems, a Kernel for the Sony Xperia M
Contributors
thirdzcee
Kernel Special Features: kernel 3.4.4 linaro 4.7.4, O2 optimizations ,zram intellidemand CPU & GPU OC and some other stuff
Version Information
Status: No Longer Updated
Current Beta Version: release-3.0.3
Beta Release Date: 2014-02-02
Created 2014-01-26
Last Updated 2014-02-08
How to apply features
how to features???
zram
USE ANY TERMINAL EMULATOR OF YOUR CHOICE
1)need to be root 1st so use this command
Code:
su
2) create zram size
initialize /dev/zram0 with 96mb disksize with this command
Code:
echo 10066329 > /sys/block/zram0/disksize
note: Disksize cannot be changed if the disk contains any
data. deactivate first before you can change its disksize.
use this formula for calculating the disksize you want
( ill use my 96mb as an example)
Code:
96mb= 96×1024×1024)
3) activate:
Code:
mkswap /dev/block/zram0
swapon /dev/block/zram0
4) stats: To check if you have swap enabled
Code:
free
and it should return something like this
Code:
total used free shared buffers cached
Mem: 506188 419736 86452 0 49404 121960
-/+ buffers/cache: 248372 257816
Swap: 1534200 100348 1433852
*its from my pc not my phone but it should look similar
5) deactivate:
Code:
Swapoff /dev/block/zram0
Click to expand...
Click to collapse
another just incase
edit: i was correct that i needed this just in case, already PMed a mod to move thread to proper section,,, sorry for posting this in the GENERAL section
Posted in wrong section should be in original android development not general but nice work tho
Sent from my C1905 using xda premium
This is the most badass kernel I've ever used!
Good work dude.
Great to see you here.
Well, as you said about the max freq to get limited up to 972mhz, that happened to me even when I was using elixer 2.0 kernel. However on the first try with max freq 1566Mhz, I got 12000+ points but later, the problem started.......I was wondering if it was due to the app itself (antutu benchmark) because while using quadrant, it gave me a score of 5700+ points, and the max freq was 1566mhz......well, what do you think @thirdzcee?
Abhigyan66 said:
Well, as you said about the max freq to get limited up to 972mhz, that happened to me even when I was using elixer 2.0 kernel. However on the first try with max freq 1566Mhz, I got 12000+ points but later, the problem started.......I was wondering if it was due to the app itself (antutu benchmark) because while using quadrant, it gave me a score of 5700+ points, and the max freq was 1566mhz......well, what do you think @thirdzcee?
Click to expand...
Click to collapse
I think your on the latest firmware, am I correct??? And I think that the capping only happens on New firmware... Though I could be wrong, I havent dug deeper any more on it
Sent from my C1905 using XDA Premium 4 mobile app
Oh anfd to add I think yout antutu is a little wrong for 1.5ghz, I can get 13k+ on 1.2 ghz with my kernel, ive seen the ss of antutu with 1.5 and it reaches 15k on antutu
Sent from my C1905 using XDA Premium 4 mobile app
thirdzcee said:
Oh anfd to add I think yout antutu is a little wrong for 1.5ghz, I can get 13k+ on 1.2 ghz with my kernel, ive seen the ss of antutu with 1.5 and it reaches 15k on antutu
Sent from my C1905 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Damn! 15k+?! That's awesome! But idk, I'm using the latest firmware and I've got antutu benchmark 3.0.3, where I got 12k with 1.5ghz and 10k for 972mhz. On the other hand, I got 13k on antutu 4.x with 1.5ghz. Well, I also experience some lags while swiping the screen and also while in gaming (with oc). Do you know what's causing it to slow down?
To fix wifi enable prima module.
icoolguy1995 said:
To fix wifi enable prima module.
Click to expand...
Click to collapse
i cant seem to find prima anywhere in the config file,,, how do i build the module???
thirdzcee said:
i cant seem to find prima anywhere in the config file,,, how do i build the module???
Click to expand...
Click to collapse
Download prima source ( search github). To enable it in config search kernel source from xperia L or else tomorrow i send you the code.
Sent from my C1905 using Tapatalk
icoolguy1995 said:
Download prima source ( search github). To enable it in config search kernel source from xperia L or else tomorrow i send you the code.
Sent from my C1905 using Tapatalk
Click to expand...
Click to collapse
thnx for the tip, i was trying with this one from doomlord https://github.com/DooMLoRD/caf-prima but errors were giving me a headache
ill look into the xperia L sources
edit:
solved the prima puzzle,,, ss sources dont include it, so i jumped to the ds sources which had the prima source available already and thanks to showp1987 who has the fixes for the prima errors, i can compile the module, the previous errors from manually adding prima to staging was too much for me to handle.. LOL
now i have another problem,,,, why is the module so HUUUGGEE... 36mb,,, that just isnt right...
thirdzcee said:
thnx for the tip, i was trying with this one from doomlord https://github.com/DooMLoRD/caf-prima but errors were giving me a headache
ill look into the xperia L sources
edit:
solved the prima puzzle,,, ss sources dont include it, so i jumped to the ds sources which had the prima source available already and thanks to showp1987 who has the fixes for the prima errors, i can compile the module, the previous errors from manually adding prima to staging was too much for me to handle.. LOL
now i have another problem,,,, why is the module so HUUUGGEE... 36mb,,, that just isnt right...
Click to expand...
Click to collapse
Yes thats the problem i came across with dual source. And that module will not work.
Try the prima source of pecancm. He updated to latest upstream.
Sent from my C1905 using Tapatalk
about ntfs
nice kernel bro
i got 13** on antutu benchmark:good::good::good:
one question from me
how about activated ntfs when connecting otg?
because my fd was formatted on ntfs (for copy large file)
thnx before :good:
soeltz7fold said:
nice kernel bro
i got 13** on antutu benchmark:good::good::good:
one question from me
how about activated ntfs when connecting otg?
because my fd was formatted on ntfs (for copy large file)
thnx before :good:
Click to expand...
Click to collapse
Youll need otg helper app for that
Sent from my C2005 using XDA Premium 4 mobile app
Can someone give me the first release of this kernel couse with version 3.0.2 i have a problem withe cwm recovery and my phone give a freezes ,it's not stable for me.
No longer updated.
This thread should be locked I guess.
Not sent from my xPERIA M.
Will be updated when official 4.3 is out... Currently got hooked on 4.2 dual firmware so I wasn't able to get back on this one
Sent from my C2005 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*By misha*
FEATURES
- Based OmniROM 03/ 15 (Thanks for this great ROM Androguide.fr ) < ---- the compilare Proxima version I had problems with the pc and did not let me compile
- Reincarnation Engine v.3
*-New script for RAM management
*-New tweaks reading and writing
*- Dalvik Virtual Memory tweaks
*Cleaning unnecessary files every restart
*-I / O tweak
*- Network tweaks
*- Zipalign tweaks
*SQ lite - optimized databases
-GEL Launcher / Xposed / Gravitybox
- ViPER4Android Audio Effects
-Pure ™ HD Graphics
- Zipalign
- Halo
- multiwindow
- Phab7 ( Similar to hybrid PA )
Inverted - Zgapps
Pimped - Kernel:
*-Sound Control: Faux123 's GPL Sound Control 3
*OC -GPU : 200MHz / 320MHz / 389MHz / 487.5MHz / 533MHz / 600MHz frequency scaling steps (use Pimp My Z1)
*- Intelliplug : Faux123 's latest driver hotplugging Intelliplug with eco mode ( v5.0 )
*-Dynamic Fsync : Faux123 's Dynamic File Sync v1.5
*- PowerSuspend : Faux123 's power_suspend driver ( Replacing early_suspend )
*-Snake Charmer : Faux123 's msm_cpufreq_limit CPU frequency driver limiter
*CPU Boost: Boost Input Faux123 's CPU module (will soon add controls for it in Pimp My Z1)
*Wake -on -GPU - touch: Allows touch events to wake the GPU if it was in slumber with previously
*KSM : Kernel Same -page Merging enabled
*- exFAT : Samsung 's open source exFAT driver
*- F2FS : Samsung 's F2FS nand -optimized file system support
*- CPUPower : Linaro 's driver cpupower PM
*Kernel - mode NEON : NEON XOR -accelerated framework & support for NEON instructions in kernel mode
*- Overall Stats: overall CPU stats on a per -core basis
*-Compression : Compressed & LZ4 XZ compression algorithm support
*Sched - MC: Multi -core support Power Savings
*Sched - SMT : Multi -Thread support Power Savings
*- Arch_Power : arch -specific features enabled power sched
*- WorkQueue : backported from kernel 3.7, Allows CPU hotplug to keep idle workers
*- Toolchain : Built with Linaro GCC 4.8.3 toolchain from 14.02 release
*- Optimizations : Built with- O2 optimization flags and many
*- Kexec - hardboot : Attempted to port @ Tassadar 's kexec - hardboot patches from the nexus 5, needs testing and confirmation That it works
-Additional Governors:
-Intellidemand
-Intelliactive
-InteractiveX2
-SmartassV2
-Lagfree
-Wheatley
-Lionheart
-Badass
-Additional I/O Schedulers:
-SIO (SImple Ondemand)
-FIOPS (Fair Input/Output Per Second)
-BFQ (Budget Fair Queueing)
-Additional TCP Congestion Algorithms:
-BIC
-Westwood
-HSTCP
-Hybla
-HTCP
-Vegas
-Veno
-Scalable
-LP
-YeAH
-Illinois
SCREENSHOTS
CHANGELOG
V1:Inicial
INSTRUCTIONS
1º downloads the ROM and the 2 FIX
2º copy to sd
3º wipe factory reset
4º install the rom and fix 2
5º wipe dalvik cache
6º Restart
7º enjoy the rom
DOWNLOADS
ROM:https://mega.co.nz/#!BAAlwbRD!0J2RcemEY6k-8HRaj6cjpy-X3uRI6qWcTKDBPUXAMAQ
FIX ROOT:http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
FIX LAUNCHER:https://mega.co.nz/#!JYwWHYKZ!0Mp5Hm9wUTS3jN9Bh7WwMy3ToMdd1P9-iXwTSAD7m7M
THANKS TO
-Koolgao
-Androguide.fr
Thanks for your work !
On which firmware is it based ? Official Kitkat ?
Is there any bugs known so far ? for example wifi, bluetooth, camera ?
I'll try this rom tonight anyway
gregou said:
Thanks for your work !
On which firmware is it based ? Official Kitkat ?
Is there any bugs known so far ? for example wifi, bluetooth, camera ?
I'll try this rom tonight anyway
Click to expand...
Click to collapse
t is based on the omnirom of Androguide.fr
everything works fine I'll upload soon rom for locked bootloaders
Thanks for your answer, but is it based on android 4.3 ou the new firmware android 4.4 who just came out ?
gregou said:
Thanks for your answer, but is it based on android 4.3 ou the new firmware android 4.4 who just came out ?
Click to expand...
Click to collapse
4.4 :fingers-crossed:
infernape763 said:
I'll upload soon rom for locked bootloaders
Click to expand...
Click to collapse
Looking forward for this
Thanks for your work
Inviato dal mio C6903 utilizzando Tapatalk
it it's based on offocal kitkat firmware, do we have to flash the officiel kernel .681 ? As we have to in the others roms thread based on this new firmware..
Cause running custom rom with official kitkat on android 4.3 kernel sounds not safe to me... maybe i'm mistaking...
Just wondering before doing something wrong with my phone...
infernape763 said:
t is based on the omnirom of Androguide.fr
everything works fine I'll upload soon rom for locked bootloaders
Click to expand...
Click to collapse
For LB?
So it's capable to use stock kernel?
That's something new...
I know some some guys tried to build MIUI based on stock ROM but they failed..
OK...let's wait and try it...
So, what you wanna say it'll work if we flash ROM (in recovery) and kernel from official ftf?
Sent from my C6903 using Tapatalk
Good to have another ROM for Z1.. Thanks
funky0308 said:
For LB?
So it's capable to use stock kernel?
That's something new...
I know some some guys tried to build MIUI based on stock ROM but they failed..
OK...let's wait and try it...
So, what you wanna say it'll work if we flash ROM (in recovery) and kernel from official ftf?
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
no, the characteristics of this rom will be similar to that of LB, but will not include the kernel.
regards
mmmm ... have seen a very even the miui? is one thing to give the locked bootloader that maybe can work
regards
Is there anything I need to flash since I have C6902?
Thanks in advance
Sent from my C6903 using XDA Premium 4 mobile app
Hey there, I have KK, unlocked bootloader with DoomLord's recovery can I just install your ROM according to the instructions, on I need to take some additional steps, if yes, which are these?
Which recovery is included in the kernel?
mnickkk said:
Hey there, I have KK, unlocked bootloader with DoomLord's recovery can I just install your ROM according to the instructions, on I need to take some additional steps, if yes, which are these?
Click to expand...
Click to collapse
Open ZIP with winrar/winzip or on device and check if there's boot.img
If you see that file, than that's kernel and you just have to flash zip in recovery...
You can also extract boot.img and flash it with fastboot
fastboot flash boot boot.img
Restart device to newly flashed recovery and then flash ROM to be 100% certain it will flash kernel properly...
Sent from my C6903 using Tapatalk
Can't install Launcher Fix, also I cant provide you log files cause of missing launcher, could you upload a .ZIP with working launcher GE maybe?
So does that mean that everything is fully functional? Like the camera for example, is it the same as on the official KK or with limited functionality?
Are there any CM bugs or is it that now that the official KK came out, the necessary files were taken all the bugs are fixed?
Thank you for your responce... Im just curious cuz i wanna leave 4.3 behind and i wanna make the best ROM choice ;D
The fix launcher.zip does not work. Please upload another one thanks!
Update: Used omniswitch to get to the playstore and installed another launcher for now.
Can't change volume while playing music.
My feedback:
VolUp behaviour: previous track
VolDown behaviour: previous track
Viper4Android FX doesn't work for me, even if Force Enable V4A is ticked.
PimpMyZ1 (yes, I know) sets Headphone Analog Gain +10 by default - in fact its +0, and the slider is bugged.
Too much Xposed modules with overriding functions, AROMA would be cool
HUGE Sync problem - I can only sync: App Data, Contacts and People details, what about calendar?
Nice ROM
So does that mean that everything is fully functional? Like the camera for example, is it the same as on the official KK or with limited functionality?
Click to expand...
Click to collapse
It has AOSP camera (limited functionality).
infernape763 said:
t is based on the omnirom of Androguide.fr
everything works fine I'll upload soon rom for locked bootloaders
Click to expand...
Click to collapse
looking forward to flash this on my LB nice work btw
Has this on my phone a few days now, and I'm very impressed with it so far. No problems with the camera (but saying that I did flash the z2 camera files, but the camera didn't work but seemed to make the AOSP cam work better) this would be a keeper if there was some way to make the Sony camera work with this rom. Thank you and keep up the excellent work.
Sent from my Xperia Z1 using XDA Premium 4 mobile app
---------- Post added at 03:07 PM ---------- Previous post was at 02:53 PM ----------
For anyone having problems with the fix-launcher zip try this one
https://drive.google.com/folderview?id=0B2sMKdcrmUR1WnZnTDlRLXJKeTA&usp=sharing (I tweaked it a little and it worked for me) hope I've shared the file right
Hello guys me again with new kernel
Presenting New Advanced RockZ1L Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: this is only for Z1 Devices For Z1 compact click here
Features of the Kernel
Check with Change log each update of kernel there are lots of new work and features
Updated the ramdisk to .242
Updated Kernel sources to .242
updated Twrp Recovery ( new build)
Updated Philz recovery ( new built )
Double tap to wake ( two individual kernels for option )
GCC 4.9.3 Linaro toolchain with Cortex-A15 buit
Sound control
Added Atheros wifi
Finally a fully working Wifi ( fixed ) not by stock modules
Fixed Memory leaks and battery optimized
Support exFAT sdcard
added and enabled Intelli-KSM ( patch from Doomlord and lot more )
Two-way stereo call recording
Zram Driver support
Force Fast charging support
LZMA compression
New RockZ1k Logo
Support sound control driver
init.d scripts supported
IO schedulers ( Which are required and works good)
CPU Governors ( Which are required and works good)
CPU VDD control
Thermel temperturing control
Added Kcal color control
RGB Multipliers (Polynomial Color Correction)
Display Color Inversion (Inverse Gamma Correction) [patch by savoca]
Comes with an app to control color
Added HBM ( High Brightnesss mode ) [HBM is able to be simulated by applying higher current drain to back light LED]
And many more not remebered
For more just go with my github
How to Install Click here
Download & credits Click here
XDA:DevDB Information
[5.0-5.1][Kernel][.368 Inbuilt multirom support][ V 4.0 ] RockZ1L Kernel [04/10/2015], Kernel for the Sony Xperia Z1
Contributors
venkat kamesh
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V_4.0
Stable Release Date: 2015-10-04
Created 2015-05-06
Last Updated 2015-10-04
How to install
Requirements
bootloader unlocked [ READ THE WARNING IN THAT THREAD BEFORE UNLOCKING BOOTLOADER ] by Doomlord
working fastboot
[How to install Kernel
download the kernel package
save it to the sdcard
reboot into recovery
flash the kernel package using recovery
reboot from recovery into system
Enjoy the new kernel
How to flash via Fastboot mode
Download the kernel package
Save it kernel to the folder containing fastboot binary
flash the boot.img using fastboot:
Code:
fastboot flash boot boot.img
reboot from fastboot
Code:
fastboot reboot
Enjoy the new Kernel
Downloads & credits
Download link for latest kernel Click here 04/10/2015
Old Downloads Lollipop
Rock Z1L Kernel 13/08/2015 click here
Rock Z1L Kernel 28/06/2015 click here
Rock Z1L Kernel 31/05/2015 click here
Rock Z1L Kernel 21/05/2015 click here
Rock Z1L Kernel 19/05/2015 click here
Rock Z1L Kernel 13/05/2015 click here
Rock Z1L Kernel 06/05/2015 click here
Old Downloads Dont try these for lollipop these are only for kitkat (just for reference)
Rock Z1k Kernel 27/03/2015 click here
Rock Z1k Kernel 26/03/2015 click here
Rock Z1k Kernel 25/03/2015 click here
Rock Z1k Kernel 22/03/2015 click here
ROckZ1k Kernel 01/03/2015 and change log Click here
ROckZ1k Kernel 05/03/2015 and change log Click here
RockZ1k Kernel 08/03/2015 Uploading
Double tap to Wake (Deep sleep will not work and battery consuming ) Click here
Without Double tap to Wake ( same change log with good battery ) Click here
Click to expand...
Click to collapse
Credits
@faux123
@DooMLoRD
@[NUT]
@MohammadAG
@hlavicka82
@Myself5
and the contributions from github https://github.com/venkatkamesh/android_kernel_sonyz_msm8974/graphs/contributors
and other devs may be i missed thanks to them ( if any inform me )
sony For Sources
Finally
The wait has ended
venkat kamesh said:
Download link for latest kernel Click here 06/05/2015
Credits
@faux123
@DooMLoRD
@[NUT]
@MohammadAG
@hlavicka82
and other devs may be
i missed thanks to them
sony For Sources
Click to expand...
Click to collapse
installed and give bootloop at sony logo with viola led.
also no Rockz1 logo on startup. Is it normal?
fer2503 said:
installed and give bootloop at sony logo with viola led.
also no Rockz1 logo on startup. Is it normal?
Click to expand...
Click to collapse
i had tested the kernel
try via fastboot mod or by flashool
and yes the logo is stock one
http://forum.xda-developers.com/showpost.php?p=60561684&postcount=436
edit:- what was your device model no ?
edit :- could you try uninstalling stock recoveries ? then try
i had tested again as you got result
venkat kamesh said:
i had tested the kernel
try via fastboot mod or by flashool
and yes the logo is stock one
http://forum.xda-developers.com/showpost.php?p=60561684&postcount=436
Click to expand...
Click to collapse
find the problem: XZDR dual recovery of the rom. removed and now the phone starts .
best app for kernel control? faux? pimp my z1?
Double Tap To Wake Up?
I heard about, that the DTW-function is actually not possible on Xperia Z1, because there is an other display obstruct.
Are there any batteryproblems with it?
Maybe you can explain how it works
@venkat kamesh why do you need to include the mpdecision binary in the zip? Will the kernel work correctly if flashed only via fastboot? I am asking becouse there are files related to wifi in the zip that will not be installed if the kernel is flashed via fastboot. Then you should tell users to flash the zip after flashing via fastboot or remove the files from zip if not needed.
fer2503 said:
find the problem: XZDR dual recovery of the rom. removed and now the phone starts .
best app for kernel control? faux? pimp my z1?
Click to expand...
Click to collapse
thanks i will now update the zip
Würfelrotze said:
I heard about, that the DTW-function is actually not possible on Xperia Z1, because there is an other display obstruct.
Are there any batteryproblems with it?
Maybe you can explain how it works
Click to expand...
Click to collapse
Yes Double tap to wake is not possible only with Z1 compact not with other devices nad it drains
for more
google it buddy
hlavicka82 said:
@venkat kamesh why do you need to include the mpdecision binary in the zip?
Click to expand...
Click to collapse
actually mpdecision file runs in our system as a vendor executable file and what it does is that it controls the governor for cpu.
this file will defines performance of your cpu1, the file gets executed every time your screen goes off
and mpdecision file overwrites the cpu1 governor settings to userspace ondemand, userspace is the governor when cpu1 is online and ondemand when offline.
so i used it
Thx bro waiting long time for this
I know what mpdecision does. But it is already included in the stock rom. In one version of the DooMKernel the binary was renamed. To revert this DooMLorD included the stock binary in the flashable zip. So unless you use a modified mpdecision binary it makes no sense to include it in the zip.
aw the download link is removed/disabled.
i assume ur uploading the new zip file with the xda recovery removal script
anyway, great work and thank you so much for the kernel, as soon as the download link is available again i will download and test
cheers,
hlavicka82 said:
I know what mpdecision does. But it is already included in the stock rom. In one version of the DooMKernel the binary was renamed. To revert this DooMLorD included the stock binary in the flashable zip. So unless you use a modified mpdecision binary it makes no sense to include it in the zip.
Click to expand...
Click to collapse
hmm i havent know the point until you said me
omar suggested to i added it
as i read more about that i started to use that
i will check it for more info, thank you mate..
chitose_ndy said:
aw the download link is removed/disabled.
i assume ur uploading the new zip file with the xda recovery removal script
anyway, great work and thank you so much for the kernel, as soon as the download link is available again i will download and test
cheers,
Click to expand...
Click to collapse
link updated
venkat kamesh said:
hmm i havent know the point until you said me
omar suggested to i added it
as i read more about that i started to use that
i will check it for more info, thank you mate..
link updated
Click to expand...
Click to collapse
sometimes in pimp my z1 i found the governor changed for some core. also the voltage controll allow to controll voltage only for max 2200mhz, not for 2400mhz. can you fix it?
fer2503 said:
sometimes in pimp my z1 i found the governor changed for some core. also the voltage controll allow to controll voltage only for max 2200mhz, not for 2400mhz. can you fix it?
Click to expand...
Click to collapse
sure for next update
i had few more things to do as well
today after finishing the fix and kernel for Z1c
i may not be available for a week
i may post but no pc to work ( something like i gonna take rest haha )
venkat kamesh said:
sure for next update
i had few more things to do as well
today after finishing the fix and kernel for Z1c
i may not be available for a week
i may post but no pc to work ( something like i gonna take rest haha )
Click to expand...
Click to collapse
perfect
have a good holiday
thanks for your work
Excellent No problems at all as of now
Thanks for your work (I also got 1.2 running )
How do you enable/disable high brightness mode ?
Kernel works smoothly, thank you for your work and effort ^^