[Q] HELP!! Phone won't turn on! - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I was working out at the gym earlier today and when I wanted to take my phone out to check messages, my phone just shut off all of a sudden and wouldn't turn back on. I tried taking out the battery and putting it back in and it doesn't turn on when I push the power button. Also, sometimes, the phone would buzz and show the samsung logo and the cm logo, but then the screen would turn black again. I can't go into recovery mode either. When I got home and tried to charge it, it never charged either. It just did the same thing and buzzed and then show the samsung and cm logo and then the screen would go black again. At first, I was thinking it might have bricked, but seeing as how I never did any firmware changes to the phone, it shouldn't have bricked. I only opened the phone to check the time. Do you guys think it's the phones problem? Or is there any way to fix this?
Any help would be appreciated!

Any luck with download mode?

audit13 said:
Any luck with download mode?
Click to expand...
Click to collapse
No, I can't seem to get into download or recovery mode.

DO you have a USB jig?

Another battery?
Sent from my SAMSUNG-SGH-I747

You are holding the power,vol up and home button at same time till the samsung logo flashes right?

Never mind guys. I took it to the repair shop and the guy said that it was my power button chip that was malfunctioning. He replaced the chip and it worked again. Thanks for the feedback though. Really appreciate it.

Related

Galxy s2 Vibrating and crashes at loading bar.

So i've looked around and no one that i've seen has the same exact problem as i do. Here's my post in another forums about my problem.
Here's my story about my Galaxy s2 for T-mobile. My phone randomly turned off 2 days and whenever i tried to turn it on, it would restart and basically never get pass the blue loading bar screen. Second, i found out about this boot loop sequence and i was able to do a factory wipe.
After i factory wiped the data etc off the phone, i was able to use it until it ran out of battery, but then after i found out it ran out of battery, it wouldn't let me turn it back on, it wouldn't get pass the loading screen, once again. On the other hand, i am able to go to recovery mode or download mode, but the phone shuts off before i can even try and click on the options i want.
Today, i found out that if i kept pressing power button consecutively on the phone, I'd be able to go to my home screen and basically act as if nothing ever happened, it'd function as a new phone! I then had the nerves of turning off my phone just to make sure it finally works now, but my hopes were crushed and now the pressing the power trick does not even work anymore. It would probably work one out of 10-15 times, and in the end it'd still restart. I am using a gingerbread galaxy s2. My friend tried using the usb jib on my phone, and it worked but whenever he tried to plug in the usb, the phone would just restart. I am extremely frustrated with this, and if you can help, please do so because it's important that i fix this phone. If you have any questions, please feel free to ask!
Hi there, thank you for the welcoming me to the forums. No, my phone is not rooted, it has always been gingerbread etc i never tried rooting because i never knew how:/ I believe this started when i was just browsing around facebook, so i'm not entirely sure what happened... Uhmm i tried going to download mode through the volume keys and power button when it's connected to usb to the i think it's odin3? and it'd be in the download mode but as soon as the computer says it's connected, the phone would just turn off again and bam, it's like nothing ever happened. My phone does charge when it's plugged in, but it doesn't show it's being charged but i remember my battery was dead last night and i charged it till today and now it's got power. ANd no i don't have a warranty:/ i really hope you can help me
Sounds like a faulty power button. Check out Mobiletech video for thier power button repair service.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
Sent from my SGH-T989 using xda premium

[Q] Stuck on Samsung Galaxy S3 Screen

Any thoughts here, so far have come up with nothing. I was running odin trying to update and got interupted partially through the process. I'm able to boot the phone on, however it quickly flashes the Samsung screen then proceeds to the "Samsung Galaxy S3" screen where it hangs. I can't boot into recovery, I can't boot into download mode. All I can do is power the phone on and get stuck on this screen. It hangs there until I pull the battery. I've tried every combination possible to boot into recovery & download mode to no avail. If I plug the phone into my computer I can't get it to be recognized since its stuck on this screen. I don't think it's bricked since i'm able to power on, just stuck.
Any thoughts?
If you can still turn it on you can definitely get to download mode. Make sure you're doing the combo right..
billard412 said:
If you can still turn it on you can definitely get to download mode. Make sure you're doing the combo right..
Click to expand...
Click to collapse
Thanks for the quick reply, I like your confidence although I'm still skeptical. I do think I've tried all of the combos to get into download mode but I'm still not getting past the Samsung GS3 screen. Can you tell me which is the "right" combo?
Thanks
camcdonald1 said:
Thanks for the quick reply, I like your confidence although I'm still skeptical. I do think I've tried all of the combos to get into download mode but I'm still not getting past the Samsung GS3 screen. Can you tell me which is the "right" combo?
Thanks
Click to expand...
Click to collapse
I've seen a borked recovery but never seen a borked download mode unless the phone was bricked which isn't the case here since it still powers on. The combo is vol-down+home+power then volume up at the warning screen
billard412 said:
I've seen a borked recovery but never seen a borked download mode unless the phone was bricked which isn't the case here since it still powers on. The combo is vol-down+home+power then volume up at the warning screen
Click to expand...
Click to collapse
That combo is not working. No matter how long/short I hold it or how long/short I wait after the battery pull it still goes straight to the GS3 Logo and hangs forever. I think its bricked. Maybe I need to try a usb jig...
camcdonald1 said:
That combo is not working. No matter how long/short I hold it or how long/short I wait after the battery pull it still goes straight to the GS3 Logo and hangs forever. I think its bricked. Maybe I need to try a usb jig...
Click to expand...
Click to collapse
Well I'm sure it's not bricked but this is the first time I've heard a jig mentioned and I don't wanna pull my hair out cuz of a stupid comment. A jig would definitely do the trick here. I assume you don't have one so a word of advice : use Ebay. And buy from someone in the states. Its more than worth the few extra bucks.
I agree that your phone is more than likely not bricked like you may think. You need to hold down the 3 key combo until the screen actually powers on and then let them go. It takes a good 5-7 seconds after the phone vibrates before the screen powers on and then let them go. It should go into download mode and if you still can't get it then sometimes having someone else try it is all it takes.... but most definetly your phone is not hard bricked if it powers on.
Sent from my SPH-L710 using xda app-developers app
z143456 said:
I agree that your phone is more than likely not bricked like you may think. You need to hold down the 3 key combo until the screen actually powers on and then let them go. It takes a good 5-7 seconds after the phone vibrates before the screen powers on and then let them go. It should go into download mode and if you still can't get it then sometimes having someone else try it is all it takes.... but most definetly your phone is not hard bricked if it powers on.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Thanks everyone for the suggestions. At this point I'm going to have to send it in to mobiltech to have them hopefully revive it using their JTAG services.
I had this problem today.....
After much gnashing of teeth and swearing and being unable to use the generic android recovery due to removing my power button (don't ask) I flashed CWM with odin then used Android Toolkit to restart into recovery, wiped the cache, rebooted and Bob's your Mother's brother everything is rosy in the garden again................:laugh:
marsamgod said:
I had this problem today.....
After much gnashing of teeth and swearing and being unable to use the generic android recovery due to removing my power button (don't ask) I flashed CWM with odin then used Android Toolkit to restart into recovery, wiped the cache, rebooted and Bob's your Mother's brother everything is rosy in the garden again................:laugh:
Click to expand...
Click to collapse
what toolkit
NotAgain!!!!!! said:
what toolkit
Click to expand...
Click to collapse
It's the Skipsoft Android Toolkit

[Q] Galaxy S2 wont boot anymore

I'm running P.A.C-Man v22.0.1 on twrp .
I've had no issues until today I was charging my phone then unplugged it. A few minutes later I checked my phone and it wasn't on. I pressed the power button and got no response. I pulled the battery and got the samsung logo without pressing the power button then it went to the PACman boot animation for about 1 second and turned off. I pulled the battery again and now it will show me the samsung logo then the bottom soft keys light up for not even a second and the phone turns off. I've tried getting into recovery and I'm only able to get to the TEAMWIN screen and the phone turns off . I tried switching batteries with my brothers phone and I get the same issue with his batttery. His phone boots up just fine with my battery. I'm not sure what could be causing this and I've tried searching and haven't found anything. Any help is appreciated:crying:
It sounds like you have the sticky power button issue. There are some ideas to try here:
http://forum.xda-developers.com/showthread.php?t=1931310
meekrawb said:
It sounds like you have the sticky power button issue. There are some ideas to try here:
http://forum.xda-developers.com/showthread.php?t=1931310
Click to expand...
Click to collapse
Thank you Ill give it a try and report back
I was about to go buy a precision screwdriver set and i kept banging the power button with an eraser (one guy in that bandaid fix thread mentioned it) and it worked. I'm still going to go buy the set anyway just in case thanks for your help:highfive:
Flash back to stock with odim
Sent from my SGH-T989 using Tapatalk 2

CM10.2 Galaxy S3 (i747) Soft bricked?

Hello Everyone,
I have a rogers Galaxy S3 I747M that I have been running with Cyanogenmod for 6 months. A few weeks ago I used the CM desktop loader to load CM10.2 on my phone and it was working fine. Yesterday my phone told me there was a CM update so I downloaded it and it seemed to be working but glitchy.
This morning my phone reset itself and now when I turn it on it just goes to the samsung screen and shuts off. I can't get into recovery or download mode.
Do I need a Jtag? Should I pay $100 to a local shop to do it.
Do I need to buy a USB jig? How do I use it if I buy one from ebay?
Thank you
Does the phone power up at all? Do you have access to a USB jig to try?
audit13 said:
Does the phone power up at all? Do you have access to a USB jig to try?
Click to expand...
Click to collapse
The phone powers up for only a second. I can't get into recovery. I can get to download screen but it shuts off in 2 seconds.
USB jig cannot keep in download mode either, phone shuts off.
I don't think it is a power button short because its not looping and my power button or USB ports have given me no issues. CM hasn;t give me issues either until today, after some random update yesterday. It kept telling me to download/update the software and I did. and it worked all night and then just restarted this morning and is not dead
Same issue
I'm facing the same issue too.
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert, it vibrates, the LED comes on and the Samsung screen comes on for a second and then the phone turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
Can anyone help us with this issue?
fatestkid said:
Hello Everyone,
I have a rogers Galaxy S3 I747M that I have been running with Cyanogenmod for 6 months. A few weeks ago I used the CM desktop loader to load CM10.2 on my phone and it was working fine. Yesterday my phone told me there was a CM update so I downloaded it and it seemed to be working but glitchy.
This morning my phone reset itself and now when I turn it on it just goes to the samsung screen and shuts off. I can't get into recovery or download mode.
Do I need a Jtag? Should I pay $100 to a local shop to do it.
Do I need to buy a USB jig? How do I use it if I buy one from ebay?
Thank you
Click to expand...
Click to collapse
I HAD THE SAME ISSUE!!!!!!
Phone is running fine, 30 minutes later it's dead. I pull the battery, put it back in, it vibrates, turns on, and turns off quickly.
Do this:
Pull out battery for 1 minute.
Put the battery in and DON'T touch it at all.
Does it vibrate? Then turn on by itself?
It should show Samsung Logo quickly, then the start of the CM boot menu.
If so, you've got a bad power button. I had the same issue. Only thing to do is replace the power button.
I got mine fixed here: http://brickedmyphone.com/
The guys name is Joe, and he probably will confirm the same thing I said. He will also trouble shoot it with you when you said him an email.
TL;DR: I doubt you're bricked, most probably bad power button.
ChinDaChin said:
I HAD THE SAME ISSUE!!!!!!
Phone is running fine, 30 minutes later it's dead. I pull the battery, put it back in, it vibrates, turns on, and turns off quickly.
Do this:
Pull out battery for 1 minute.
Put the battery in and DON'T touch it at all.
Does it vibrate? Then turn on by itself?
It should show Samsung Logo quickly, then the start of the CM boot menu.
If so, you've got a bad power button. I had the same issue. Only thing to do is replace the power button.
I got mine fixed here: http://brickedmyphone.com/
The guys name is Joe, and he probably will confirm the same thing I said. He will also trouble shoot it with you when you said him an email.
TL;DR: I doubt you're bricked, most probably bad power button.
Click to expand...
Click to collapse
That is correct...( This is Joe ) sounds like a bad power switch

[Q] Phone won't turn on after trying to update via KIES - rooted

My Samsung Galaxy S4 (rooted with CM, but stock otherwise) will not power on at all after trying to update it via Kies. It got stuck on the screen where it shows the green Android guy, with "Do not turn off the target" for well over an hour. I had to pull the battery to get it to get off of that screen. When I went to power it back up, it does nothing. Tried every combination of buttons that I could think of, but the phone will not respond.
Is it bricked? Please help!
beee240 said:
My Samsung Galaxy S4 (rooted with CM, but stock otherwise) will not power on at all after trying to update it via Kies. It got stuck on the screen where it shows the green Android guy, with "Do not turn off the target" for well over an hour. I had to pull the battery to get it to get off of that screen. When I went to power it back up, it does nothing. Tried every combination of buttons that I could think of, but the phone will not respond.
Is it bricked? Please help!
Click to expand...
Click to collapse
Sounds pretty bricked. If you can't power it on at all, even to recovery or download mode, I'm not sure what you could possibly do to fix it. Nothing that interface with the phone to fix it if the phone can't power on.
Skipjacks said:
Sounds pretty bricked. If you can't power it on at all, even to recovery or download mode, I'm not sure what you could possibly do to fix it. Nothing that interface with the phone to fix it if the phone can't power on.
Click to expand...
Click to collapse
Crap. I guess I'm going to have to head over to T-Mobile to see if I can get a warranty replacement. I think it's good until May.
Edit: T-Mobile Rep thinks that it's a hardware failure of some sort, so they're sending me a "new" S4 overnight. At least I'll be able to get 4.4 without too much trouble now.

Categories

Resources