Related
Version 2 spike speedy rom for galaxy released
Powered by voodoo lagfix Ver-5-pre6
Replace tw launcher with modified and faster tw launcher
No need to install base rom first.
Fully deoxed and zipaligned.
Rooted and Busybox
Recovery 2e
Removed :
Live wallpapers
All Samsung Widgets
Aldiko ebook
Allshare
Daily Briefing
Email
Layer
Latitude
Maps
Memo
Mini diary
Navigation
Places
Press reader
Talk
Tinkfree office
Voice dialler
Voice recorder
Voice search
Write and go
Added :
Voodoo Lagfix version-5-pre6
Modified touchwiz Launcher
Android Stock Lockscreen
Black wallpaper & nice status bar icon (nexus icon)
Be watchful:
This install will WIPE all user data.
Download :
XWJP6 Spike Speedy Edition v2.1
Mediafire
JPJPA Spike Speedy Edition v2.0
Mediafire
How to install:
You can find it in post 2
Pics :
For install default programs you can download programs below and rename zip file to update and copy it to internal memory and install it from recovery(2e)
Touchwiz
Live wallpapers
Islamic Programs
Aldiko ebook
Allshare
Email
Layer
Memo
Mini diary
Tinkfree office
BuddiesNow
Days
Flash Player from JP6
Voice recorder
Writeandgo
special thanks to :
Supercurio
DocRambone
Tayutama
kalpik
Install guide :
1. Disable any lagfix if have it installed
2. Make sure have the 2e recovery. If your rom is froyo and you don't have 2e recovery, use cf-root by chainfire
3. Make sure you have a backup of your /efs (not mandatory, but highly recommended).
4. Factory reset is NOT required, but is recommended. Wipe cache and dalvik cache if you’re not performing a factory reset.
Installation Steps:
1. Download the ROM and put Spike Speedy Edition v2.0.zip on your internal memory
2. Download clockworkmod recovery from here. You *need* Clockworkmod, this won’t work with stock recovery.
3. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
4. If you had Voodoo installed prior to installing this ROM (eclair or froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo". If you’re coming from sztupy’s kernel, make sure you have disabled all Lagfixes from CWM.
5. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
6. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
7. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
8. Select “choose zip from sdcard” and then select Spike Speedy Edition v2.0.zip. Then choose yes.
9. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
10. The first boot will take some time as the ROM will deodex
Special tnx to kalpik for install guide.
nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...
Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx
Can you add polish locale to next release?
d.fx said:
Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx
Click to expand...
Click to collapse
i will do that
sardor said:
Can you add polish locale to next release?
Click to expand...
Click to collapse
ok , i will make update.zip for add many lang soon
eikka85 said:
nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...
Click to expand...
Click to collapse
I tested market again and it works fine
You must check your connection
thanks spike the rom is nice and responsive. really nice job, keep up the good work.
Mirror for JPJPA version
Rapidshare
could u give the link of"all samsung widgets" plz?
hi
language romanian... please
thank!!
thanks sir ,, realy realy its perfect rom and hope to continue to v3
i cocked JPM/JP6 spike speedy and i upload it soon
be ready ...
Thanks sir but can you tell me whats the diffrent between jpa and jp6 and jpm in performance?
XWJP6 version added . go first post for download
How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...
xidium said:
How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...
Click to expand...
Click to collapse
no
1- download two parts
2- extract with winrar to XWJP6 Spike Speedy Edition v2.1 folder
3- open XWJP6 Spike Speedy Edition v2.1 folder and copy XWJP6 Spike Speedy Edition v2.1.zip to internal memory ...
Whats languages in this rom and changelog?
hi
thank.. jp6..
I need maps (update.zip)
plzzzzz.i want "All Samsung Widgets" in my galaxy.
Non-Deodexed for it.
I can ride on the theme of 2.3.4 [XXKPH] view. (The fact mixed with port of DarkSimplify Theme UOTkitchen).
I want to try it in the comments of my post. That's me.
I did not have much computer knowledge. Try to do so.
credits to: ingbrzy & mancunianec boards of xda-developers.com.
Way down.
1. Download it and save the file. Zip into the memory card. (No extract).
2. Restart your computer into recovery mode (press power on it. The screen lights up, immediately press the HOME + Vol. hold up so well into recovery mode).
3. Download files from the sd card.
4. แpe wait until I have it done then. reboot the machine.
5.enjoy! (5555 ending in a cracking game.)
Files theme:.
Download
If u like my Share..pls hit thanks..
Good to try..
thanks..
Request
Please i really want to know how do you changed the notification bar as in your 2nd image..
Deodex version please...
___________________________
Galaxy Ace GT-S5830
CodeRom v1 with Darktremor
shanychowdri said:
Please i really want to know how do you changed the notification bar as in your 2nd image..
Click to expand...
Click to collapse
Just download the file and install in recovery mode as describe in first para..
Just remember that -
a) It is for KPH 2.3.4
b) It is for Odex firmware..if you have deodex..then this them will not work..
Thats all..
Works great thanks...
Sent from my GT-S5830 using XDA Premium App
i decided to compile things for newbies like me so we stop makin a foll of ourselves asking around etc...
i will be compiling links tocustoms roms and things that i think and others think maybe of great significant to our devices
first is the FAQ guide,,
this contains rooting and other cool stuff
(i may include links outside xda if needed)
http://forum.xda-developers.com/showthread.php?t=1512749
http://forum.xda-developers.com/showthread.php?t=1325453
rooting tip:
since basically rooting will or might void warranty right,so ill share what i did to a friends phone...
basically just created a nandroid back up of his current rom using skins recovery..
then installed a new custom rom(rooted rom)
voila...2 bird 1 stone,,,custom rom and root at the same time...
and in case you want the old one back just restore to back up..
not sure if this method counts the bin....
here is for the list of updating to official and unofficial stock roms
http://androidadvices.com/update-samsung-galaxy-s5360-xxkk6-gingerbread-235-firmware/
http://forum.xda-developers.com/showthread.php?t=1325453
http://forum.xda-developers.com/showthread.php?t=1465800
CUSTOM ROMS
Creeds
http://forum.xda-developers.com/showthread.php?t=1453286
Repencis
http://forum.xda-developers.com/showthread.php?t=1516037
MySS
http://forum.xda-developers.com/showthread.php?t=1518439
Hybrid
http://forum.xda-developers.com/showthread.php?t=1465405
Blazing Hatred
http://forum.xda-developers.com/showthread.php?t=1508053
Sense Aurora
http://forum.xda-developers.com/showthread.php?t=1506927
Terma Rom
http://forum.xda-developers.com/showthread.php?t=1520167
Infected
http://forum.xda-developers.com/showthread.php?t=1446677
Emerald
http://forum.xda-developers.com/showthread.php?t=1492418
Aurora V2
http://forum.xda-developers.com/showthread.php?t=1538616
Chobits
http://forum.xda-developers.com/showthread.php?t=1573306
Bazzrom
http://forum.xda-developers.com/showthread.php?t=1557740
CM7
http://forum.xda-developers.com/showthread.php?t=1583959
Tweaks
ram and battery life tweaks by [email protected]
http://forum.xda-developers.com/showthread.php?t=1491714
Beats
http://forum.xda-developers.com/showthread.php?t=1526643
Guide to A2sd
http://forum.xda-developers.com/showthread.php?t=1524940
Build prop
http://forum.xda-developers.com/showthread.php?t=1533688
(note build prop edits here are from other device pick the thing that you feel will be applicable)
http://forum.xda-developers.com/showthread.php?t=771232
http://forum.xda-developers.com/showthread.php?t=1533688
Sd Card Partitioning
http://forum.xda-developers.com/wiki/SD_card_partitioning
make your back keys vibrate
http://forum.xda-developers.com/showthread.php?t=1463510
Recoveries
Skins
http://forum.xda-developers.com/showthread.php?t=1446796
Madteam
http://forum.xda-developers.com/showthread.php?t=1467492
Fix Earphone Issues if you have any
http://forum.xda-developers.com/showthread.php?t=1469034
sgy manual
http://forum.xda-developers.com/showpost.php?p=22372536&postcount=1
ROM SURVEY and Discussion
http://forum.xda-developers.com/showthread.php?t=1511345
From MAI77
some few custom ROMs change MAC addr of wifi, thereby keeping them from reregistering immediately in WLAN if "access point" limits via MAC#
From Ronnieryan
ronnieryan said:
here's the drivers
http://depositfiles.com/files/3raqcskp2?subid=141468
anyways if you want smart keyboard, just PM
Click to expand...
Click to collapse
ALSO Adding the Elusive CREEDS ROM LINK NOT THE NANDROID one,,the original one please refer to creeds for the installation procedures
maybe uploaded files that u downloaded are broken..i will upload now the creeds ROM i downloaded b4
http://www.mediafire.com/?wc2xxkg83wa8bvu,5fgy69r5yw7hpnu,swtzbbod5nsnq7q,yzzjcy3hdgzkow0
the files are aranged from 1-4, proper install
for AOSP and 2.1
http://www.mediafire.com/?eecmc4fu8abgy12,g8y4cee45utp190
thanks to ronnieryan
KERNELS!!!!Finally!
Press Thanks For Maroc-OS & Rate 5 Stars
Files Needed :
Odin3 1.84 : http://www.mediafire.com/?y7v62dq119suj8r
Odin 1.85 : http://www.mediafire.com/?zgqfh954k9flr47
Versions:
Test Kernel :http://www.mediafire.com/?0j6guwgg60opj7y
Alpha v0.1 :http://www.mediafire.com/?1rsf19z8qgl1qu6
Alpha v0.4 : DELETED
Alpha v0.5.1 DELETED
Alpha v0.5.2 http://www.mediafire.com/?4p6sfran2si6f3j
Alpha v.0.5.7 http://www.mediafire.com/?fzndkvldkhais0g
V0.6 RC 80 http://www.mediafire.com/?xdkh1n2owok72cx
V0.7 RC 10 http://www.mediafire.com/?1vx122767j43z4f
INSTRUCTIONS :
Short Flashing Guide
- download the .tar file
- install Kies, or Samsung driver pack
- download Odin3 1.84 or 1.85 (download links above)
- stop Kies
- stop all active ADB sessions
- start odin
- power off Your SGY
- boot into download mode
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
- in the PDA field, browse for the kernel tar
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
OR
Flash Kernel Without Increasing Custom Bin Count
Special Thanks to FAQBLY For This Wonderful zip
faqbly has compiled a script that can flash boot.img from CWM Recovery and it will not increase Custom Bin Count.
Benefits
You can Install Custom Kernel without increasing your Custom Bin Count.
Below is the ZIP file from faqbly
http://www.mediafire.com/?26928er6dqmucrm
Instructions:
In the .zip file provided by faqbly, you have to replace the boot.img with the boot.img from the tar file of a kernel
Example would be to download kernel from Maroc-OS
You Will Have A .tar file that contains the boot.img
Extract boot.img from tar, and place it to the zip by faqbly
And flash via CWM Recovery
Apps Needed
A2SD : http://www.mediafire.com/?86t3oztvoyb0dul
Droidwall : http://www.mediafire.com/?mcxb6y8qg26mfg3
No-Frills CPU:http://www.mediafire.com/?ow3r7zl96chd9kp
If Ever Problem Occurs, Just Flash Back To These Kernels
Stock http://www.mediafire.com/?dzfcrhb8fj3s40x
Terma Kernel http://www.mediafire.com/?81d1acx1c19m9k5
Test Kernel http://www.mediafire.com/?0j6guwgg60opj7y
Originally Posted by mai77 View Post
this reports aims to stay concise & readable and maintains hyperlinks to posts in this large thread, that contain specific info, especially the source code to solve a problem or add a feature. If you come across another code snippet from the Android world, that could improve SGY OS: post it in this thread ! kernel testers can switch between kernels without changing the rest of the system, here is a drop-in-replacement stock kernel to exchange for our custom kernel, flash as PDA with ODIN.
Kernel wish list / feature list
unreported __ EXT2/EXT3 & EXT4 support. (just kernel support, still need scripts to convert blocks)
unreported __ System/Cache & /Data mounted as EXT4 R/W. (needs fixes)
unreported __ Added /Data mount, IO Scheduler and CPU Governor Feature (Conservative, Ondemand, Powersave & Userspace governors are enabled)
Neg report __ NETFILTER Compatibility with DROIDWALL /// report on 0.6 -80, 0.7
unreported __ INIT.D Support
unreported __ Root Support (su). (currently DELETED)
Neg report __ "adb root" support , default.prop file /// report on 0.6 -80, 0.7
unreported __ Overclock / Undervolt support : at 1GHz, but needs some fixes
unreported __ Best ZYGOTE Service for Detailed CATALOG
unreported __ recovery in Read/Write mode
unreported __ some improvements & fixes, bmlunlock
here is the thread
http://forum.xda-developers.com/showthread.php?t=1550065
HOW TO FLASH KERNEL GUIDE THE EASIEST WAY
Requierements:
boot img file (2 the kernel your flashing and termagrancis kernel)
mai77 flasher thingy
and cwm of mads or skins...
procedure:
download the kernel respectively,both kernels are on tar file do you need to extract them using any extarctor (for me i used androzip form market)or tyu can use es file manager...
extract them on sdcard one file at a time and rename them
example kernel 1
after extrract rename boot.img to boot.imgx
do the same thing on the other kernel,but rename differently...
now,,,decide which kernel to flash..
example
i renamed
boot.imgx(marcos kernel)
boot.imgz(terma kernel)
i will flash
terma kernel
rename or remove the other letter
the kernel you wnat to flash should have the boot.img name,.
now go to recovery..
install via zip
choose sd card update
choose SGYbiCWM.zip
and apply reboot,,,
youre done,.,,!
check under settings kernel...
this was the method ive opersonally used
http://forum.xda-developers.com/showthread.php?p=23803175#post23803175
LOST PHONE>>
http://forum.xda-developers.com/showthread.php?t=1572006
BATTERY CALIBRATION!
AUTION: DO THIS PROCEDURE ONLY ONCE OR TWICE, FULLY DRAINED BATTERY CAN CAUSE CRYSTALLIZATION WHICH SHORTENS BATTERY LIFE.
HAVE CWM INSTALLED INCASE YOUR STOCK RECOVERY HAS NO ADVANCED OPTION.
1. Fully drain your battery, play some games, music, etc.. NO PORN!!
2. Let your battery cool for atleast 2 minutes
3. Restart phone to remove residual charge( it will boot only halfway)
4. After the phone shuts down remove battery and let it cool for atleast 2 minutes.
5. Re insert battery and charge your phone in OFF mode.
6. After the phone reaches 100% charge boot into recovery (Power+Home+Volume_up button)
7. Go to advance (I think some android has this in recovery, if not go to CWM and you will find it there).
8. Wipe battery stats.
9. Press Power/Back and Reboot your phone
10. Wait till the phone reaches 100% charge and disconnect charger
11. Have a happy life.
Before my phone has a battery life of less than a day (about 20 hours) with battery saver, task killer and minimal settings. After calibration my phone without task killer and battery saver installed lasts short of 3 days with moderate settings. I use only a Ram cleaner and V6 fast engine flush now. "Cleaner" apps are good, "Killer" are not..
THIS IS A BATTERY CALIBRATION PROCEDURE NOT A BATTERY LIFE EXTENDER(THERE IS NO SUCH THING), JUST SAYING SO THERE IS NO CONFUSION.
taken from
http://www.symbianize.com/showpost.php?p=10845667&postcount=14
Arrow Creed's 2.0 (ICS inspired) installation guide
As per request here is the original thread for files and photos
http://forum.xda-developers.com/showpost.php?p=22219562&postcount=97
This is a Creed's 2.0 installation guide. Only for Samsung Galaxy Y (GT-S5360)
Make sure you are on 2.3.6 Gingerbread
Before we start, make a cwm back up of your current rom
How to back up:
1. Place "skin1980cwm zip" to the sd card (needed files are attached below)
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Use the volume up and down key as your scroll key and choose "appy update from sdcard"
4. Choose "skin1980cwm.zip" (use the home button to select)
5. You will be in a new interface (yellow fonts)
6. Go to "restore and back up"
7. Select "back up"
8. Wait until back up completes then reboot
note: If something goes wrong, just "restore" your back up using cwm
Creed's 2.0 (with 14 toggles and swipe to remove notifications)
Features:
*Soft Root- SU
*Pre Deodexed
*ZipAligned
*Maps With WorldWide Navigation
*Bloatware Removed
*BusyBox Support
Message App:
*No Auto Sms To Mms Conversion
*No Receipient Limit
*Built In 5 Theme
Touchwiz App(Samsung Home) :
*Transparency Level Increased
*Alphabetical Auto Arrange
*Landscape Orientation Introduced
*Auto Brightness Option in Display
*Boot Animation Enabled
*Custom Boot Animation Added
*Custom Power On Sound
*Reduces Startup Time ~Less Than 13 seconds
14 Status Bar Toggles
*All 5 From Samsung(Wifi,B/T,Soung,GPS,Orientation)
*Data
*Lockscreen-Off
*FlashLight
*Shut Down Options (Reboot,Recovery & Download mode)
*Airplane Mode
*Brightness
*Auto Synchronise
*Screen Timeout
Default wallpaper
Things (files) you will be needing:
(1) update.zip (if you are not yet rooted to by-pass system commands)
(2) Skin1980cwm.zip
(3) creed's 2.0 zip
download from here
Creed's Rom 2.0
(4) boot animation fix zip
(5) 14 toggles zip
How to root: (required)
1. Place the "update.zip" in your sd card
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Select "apply update from sdcard"
4. Find the "update.zip" and select it (using the home button)
5. wait to finish then restart phone
Creed's installation instructions:
1. Place all the (4) needed files in your sd card
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Use the volume up and down key as your scroll key and "wipe data and "wipe cache"
4. After wiping, choose "apply update from sd card"
5. Choose "skin1980cwm.zip"
6. You will be in a new interface (yellow fonts) then select "install zip from sd"
7. Find "Creed's 2.0 zip" and select
8. Wait for installation to compete (3-5mins)
9. Restart phone
note:
After installing Creed's rom 2.0 install the "boot animation fix zip" first
then the "14 toggles zip" using the same method as above (except for #3)
"Swipe to remove" notifications instructions:
note: extract the "swipe to remove" rar file (contains two files)
1. Download "root explorer"
2. Open "root explorer" and go to your sdcard
3. Set the permission from r/o to r/w
4. Copy the "framework.jar"
5. Paste it to the system/framework folder
6. Set permissions to rw-r-r
repeat the procedure with the "systemUI.apk" (place it on system/app folder)
note: you will encounter a lot of force close (normal) but just go on
7. Press the power button and restart the phone
"DroidX" boot animation (alternative)
1. Open "root explorer" and go to your sdcard
3. Set the permission from r/o to r/w
4. Copy the "bootanimation.zip"
5. Paste it to the system/media folder
6. Set permissions to rw-r-r
7. Restart the phone
Fonts (alternative)
Roboto
Sweet Confusion
Ubuntu R
Comicbook Commando
Chocococky
More fonts here
1. Place on sdcard
2. Click and install
3. Go to "Display"
4. Go to "screen display"
5. Go to "font style"
6. Choose the font that you like
TweakZV6 Performance Scripts
note: make a cwm back up (for emergency)
1. Place "TweakV6.zip" on sd card
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Use the volume up and down key as your scroll key and choose "appy update from sdcard"
4. Choose "skin1980cwm.zip"
5. You will be in a new interface (yellow fonts)
6. Find "TweakV6.zip" and select
8. Wait for installation to compete
9. Restart phone
Credits to:
pratyush.creed (creed's rom 2.0)
budyisdead (swipe to remove notification)
evanlocked (DroidX boot animation)
krishna_nirvana (update zip)
Skin1980 (skin1980cwm zip)
[email protected] (tweakzV6 zip)
SethDeCode'z (fonts)
feel free to add..
i will add if i find or deem anything useful..
<post deleted>
thanks I'll merge it asap
Add that there isn't a CM/MIUI port for SGY yet while you're at it Anant.
Although my hopes that newbies will go there before making a new thread is almost nil. *-*
silvane
well i am guessing that aswell....but will still try for our references an index And help page is what i am aiming will complete in 2 days....
Sent from my GT-S5360 using Tapatalk
Thread moved to general and stuck!
great thread!
very useful!
nice thread good work
galaxy y
plz tell me how to increase or make use of sdcard as internal memory for my samsung galaxy y and i currently rooted my phone and i have gingerbresd 2.3.6. Which customrom is suitable with better features
u can use custom rom like,creeds v2.0,repencis v2.0 or hybrid 2.0,these rom r good and less bugs.. use link2sd or a2sd.. in link 2 sd u need to partition ur sdcard to make it work..
some few custom ROMs change MAC addr of wifi, thereby keeping them from reregistering immediately in WLAN if "access point" limits via MAC#
pls put in guideline
nice writeup
mai77 said:
some few custom ROMs change MAC addr of wifi, thereby keeping them from reregistering immediately in WLAN if "access point" limits via MAC#
pls put in guideline
Click to expand...
Click to collapse
Added on first page
Sent from my GT-S5360 using Tapatalk
Hey mai would be glad if you added my thread in tweaks
link
**Thanks for adding i thanked ya **
[email protected] said:
Hey mai would be glad if you added my thread in tweaks
link
Click to expand...
Click to collapse
Will add after a day or two mate
Sent from my GT-S5360 using Tapatalk
Nice Thread
i had rooted my phone through CWM , does my custom bin counter increased??
aman.droid said:
i had rooted my phone through CWM , does my custom bin counter increased??
Click to expand...
Click to collapse
no...bin counter if you flash updates using odin
thumbs up for this!!
very useful guide for newbies!!
Thanks for the useful info.
Hi guys, I'm new @ xda.
I found this tuts of how to enable navigation bar for cm 9 http://forum.xda-developers.com/showthread.php?t=1364757
so I try to follow the instruction to make the navi bar work in Cm9
and oke finally I can make it work to Cm9, and I have made a flashable zip
VERSION 1
Cm9-Navigaion bar.zip : https://www.dropbox.com/s/g2256l42qbtr8np/CM9beta1-navibar.zip
THIS MOD IS ONLY FOR CM-9
Instruction :
Go to cwm recovery
mount & storage
change mount system into unmount system,
back to cwm menu
install zip
chose cm9-Navibar.zip
reboot
Credit & Thanks to :
Sir. arco68 , for Cm.9.
Sir. evilisto, for tuts navigation bar
and to disable navibar :
flash this trhough cwm :
mount & storage
change mount system into unmount system,
back to cwm menu
install zip
chose disablenavibar.zip
reboot
DisableNavibar.zip https://www.dropbox.com/s/v7cv1d4cfdramz7/disableNavibar.zip
optional 1
OKE GUYS, finally I can turning off the capacitive light of the phisical Home, Back, Menu button and also the button function
Enable Navigation Bar, Disable Capacitive light & physical Menu, Home & Back buttons
Instruction :
install Navi-disablePhysical_button.zip with the same method :
Cwm
mount & storage
change mount system into unmount system
back to cwm menu
install zip
chose zip
select Navi-disablePhysical_button.zip : https://www.dropbox.com/s/zypdali1bfocpf4/Navi-disablePhysical_button.zip
reboot
after done
if you want to Enable the physical button function Install EnableTouchkey : http://db.tt/n1adEFnH
optional 2
Push NavigationBar.apk to system/app/here folder
mount : rw-r-r
set permission
V V
V
V
reboot
Navigation Bar.apk : http://db.tt/3HsLDfJx
VERSION 2, with dock
what's in this version 2 with dock ?
1. Modified framework-res.apk & systemUI.apk
2. Enable ICS Navigation Bar with dock, Disable capacitive light , back, menu button but not its function
how to install ?
put Navibar(theme)-offLight.zip on sdcard
Navibar(theme)-offLight.zip :https://www.dropbox.com/s/ggverpex9b0y34n/Navibar(theme)and-offLight.zip
go to CWM rcovery
mount &storage
change mount system into unmount system
back to CWM menu
install zip from sd
chose zip
select Navibar(theme)-offLight.zip
Reboot
done reboot
Push NavigationBar.apk to system/app/here folder
mount : rw-r-r
set permission
V V
V
V
reboot
Navigation Bar.apk : http://db.tt/3HsLDfJx
theme Icon for VERSION 2
Ekstrak this,.one pack : https://www.dropbox.com/s/s1jcwttfis78wsr/Icon-NewDock(EkstrakThis).zip
Ekstrak the zip, and you'll get five flashable.zip theme icon for VERSION 2
You only can install those zip if you have already install the mod VERSION 2 Navibar(theme)-offLight.zip
Ekstrak this pack(3 themes), : http://db.tt/K3FWXwiI
REVERT BACK STOK CM9
flash this zip if you want go revert back to stok fresh CM9. without any mod
http://db.tt/kIFnFwsT
"If you like my Mod, please to press the THANKS BUTTON
Adi_ai****eru said:
hy guys, im new @ xda.
i found this tuts of how to enable navigation bar for cm 9 http://forum.xda-developers.com/showthread.php?t=1364757
so I try to follow the instruction to make the navi bar work in Cm 9 beta 1,
and oke I have made a flashable zip
https://www.dropbox.com/s/g2256l42qbtr8np/CM9beta1-navibar.zip
Intruction :
Go to cwm recovery
mount & storage
unmount system
install zip
chose zip
reboot
credit & thanks to :
arco68
evilisto
Screenshoot :
1.https://www.dropbox.com/s/jfvemtf1gl296f6/PhotoFancie2012_09_21_19_38_11.jpeg
2. https://www.dropbox.com/s/vtuu6oi1ioktv1u/PhotoFancie2012_09_21_19_39_36.jpeg
and to disable navibar :
flash this trhough cwm :
mount & storage
unmount system
install zip
chose disablenavibar.zip
reboot
DisableNavibar.zip https://www.dropbox.com/s/v7cv1d4cfdramz7/disableNavibar.zip
Click to expand...
Click to collapse
Can you give me detailed instructions? Cant seem to follow the unmount system part. Sorry for noob question. Thanks
ummm.. i THINK it should be "mount system" instead of "unmount system" in your instruction. the system is unmounted by default in cwm (CMIIW), i tried several times with no luck hahaha then i tried to mount the system then flash the zip file aaand it works :laugh:
CMIIW, im not an expert
thanks in advance
btw do you know how to turn off the capacitive buttons' light?
marionite said:
Can you give me detailed instructions? Cant seem to follow the unmount system part. Sorry for noob question. Thanks
Click to expand...
Click to collapse
btw, I have the latest cwm 6 intalled.. but may be for lower version of cwm try a normal install
monster.kancut said:
ummm.. i THINK it should be "mount system" instead of "unmount system" in your instruction. the system is unmounted by default in cwm (CMIIW), i tried several times with no luck hahaha then i tried to mount the system then flash the zip file aaand it works :laugh:
CMIIW, im not an expert
thanks in advance
btw do you know how to turn off the capacitive buttons' light?
Click to expand...
Click to collapse
oke I'll try next update.
Nice work bro
ibanez7 said:
Nice work bro
Click to expand...
Click to collapse
sumon mastah Recognized themer.. LOLs...
Adi_ai****eru said:
btw, I have the latest cwm 6 intalled.. but may be for lower version of cwm try a normal install
Click to expand...
Click to collapse
You gave a wrong step. It should be mounted to flash it. How can you install it if the system folder hasn't mounted?
dewadg said:
You gave a wrong step. It should be mounted to flash it. How can you install it if the system folder hasn't mounted?
Click to expand...
Click to collapse
bugs of Cwm maybe,
but try you dont have to unmount
but do fix permission after done install it
and it work I use my method
How To install THE RIGHT WAY
dewadg said:
You gave a wrong step. It should be mounted to flash it. How can you install it if the system folder hasn't mounted?
Click to expand...
Click to collapse
I will Tell you how to install this.
1. Go to CWM.
2. Go to mounts and storage
3. mount/system
4. Install Zip from sd card
5. Choose zip
5.Reboot.
Automatically Navigation Bar should be enabled:laugh:
jassim007 said:
I will Tell you how to install this.
1. Go to CWM.
2. Go to mounts and storage
3. mount/system
4. Install Zip from sd card
5. Choose zip
5.Reboot.
Automatically Navigation Bar should be enabled:laugh:
Click to expand...
Click to collapse
have you succes install my mod ? ..
have you press the THANKS BUTTON ?
able to install but unable to remove
jinghuanpang said:
able to install but unable to remove
Click to expand...
Click to collapse
I have given the flashable.zip to disable navi bar n revert back .. follow the instruction
could I disable it without flashing via cwm? like turning off in setting.
vlorience said:
could I disable it without flashing via cwm? like turning off in setting.
Click to expand...
Click to collapse
no you could not, you only can add or change the position button by editting @ system setting , Navigation Bar.
but I'll try to make the nav bar can be disable trough system Setting menu .. you just keep up to date with this Mod
dont forget to press the THANKS BUTTON here
Adi_ai****eru said:
I have given the flashable.zip to disable navi bar n revert back .. follow the instruction
Click to expand...
Click to collapse
yeah. i flashed. nothing happens
jinghuanpang said:
yeah. i flashed. nothing happens
Click to expand...
Click to collapse
enable navibar and disable it are using the same method of installing , try again
Thanks to this mod.. do you know how to disable the soft key light?
Thanks
utingbato said:
Thanks to this mod.. do you know how to disable the soft key light?
Thanks
Click to expand...
Click to collapse
yes I know how, but I skipped that step when I modify the framework-res.apk , but I'll try in the next update Mod..
I think the resolution changed..
Hello guys it is another project/work i released in our huge community XDA...
So...im not developer but I ported the the AOKP from galaxy ACE to our Gio :laugh:
This rom based on last CM10 by jallaxy and it is realyyy smooth
Ported from ace. Original work is by msnnsm (credits goes to him)http://forum.xda-developers.com/showthread.php?t=2072657
Features:
Android 4.1.2
Superuser & Busybox preinstalled
Deodexed
180 Degree rotation
Built in performance/init.d configuration (Thanks Kejar & company)
Custom Power Menu
Brightness slider in navigation bar.
Custom color for anything in RC
Custom Clock Color/Location: Right, Center, Disable
Battery Icon/ Color Picker: CircleMod, Bar, Text Only, Icon Only, Icon+Text or None
Battery Bar in Status Bar or Nav Bar, Bar Thickness, Charging animation
Nav Bar Transparency
Nav Bar Button Reorder: Back-Home-Search-Menu
Nav Bar Color Picker
Nav Bar Button Glow Duration: Off, Fast, Slow
Nav Bar: Long press to Search button
Nav Bar Hide on Lockscreen
Toggles in Pull Down Menu: Auto rotate, Bluetooth, GPS, Wi-Fi, Aiplane mode, Vibrate, Silent, Sync, Data, 4G, Tethering, Torch, Brightness
'Traditional' toggle layout (where the toggle are on the very top) -- find in RC > Statusbar General > Layout
LCD Density (Careful with this)
Menu Button location: Right, Left, both, Remove
Menu Button Visability: Always show, Always show Invisible Icons
Lockscreen Style: Stock, Quad, Octo, ol' gingerbread
Lockscreen Wallpaper
Lockscreen color changer
Lockscreen calendar
Lockscreen SMS customizable shortcut (with icons)
Lockscreen Horizontal Option
Performance Menu: (Use With Caution) Max/ Min CPU, Scaling Governor
Unlock Sceen with Legacy Menu Icon
Volume Key to Wake Screen
Volume Key to Skip Tracks
Long-press back button to kill process
Disable CRT off animation
LED pulse settings (time on/off)
ICS ringtones/notification sounds
Customize carrier text to whatever.
Power Menu options: Boot to recovery/ Boot loader, Reboot, Screenshot
Facebook contact sync integration (must wipe to get this)
Disable Boot animation
Keyboard: Volume keys act as a cursor while typing -- disable in keyboard options
Long press home for recent apps (thanks brucekey)
Quick torch (enable in ROMControl, long press power when phone turned off. See the magic.)
Fast charge toggle for maguro/toro for kernels that support it
Weatherpanel in notification drawer
Weather on lockscreen
WORKING:
*All working
BUGS:
-same CM10
ScreenShots: attachments above
Credits,Thanks
Jellaxy Team for base
msnnsm for rom
Bytecode for apps and framework
ImbaWind for adrenaline engine
PIMP MY ROM for tweaks
and me of course to port this rom to our Gio
if i forget somebody send me a P.M please
Download:
http://www.mediafire.com/download.php?szgkym5kxigksy1
*You can flash light gapps:http://www.mediafire.com/?pu5watuq9xe37z1
Changelog:
Beta v1
*initial release
*change and replace necessaries files to put app running like fully camera and some others...etc
*remove torch app
IMPORTANT!
-For best experince change minimum cpu frequency to 245mhz and select I/Q SIO.
-If blue screen appears at boot close phone and reboot there is no problem.(You can close phone with pressing power and volume down button at the same time for 10-15 seconds)
-Use an app like task killer and kill background apps regulary, if you do it rom is really smooth
Installation
1. Wipe data/ factory reset
2. Wipe cache partition
3. Advanced/ wipe dalvik cache
4. Advanced/ wipe battery stats
5. Install zip from sdcard and reboot your system
Not all above switches are working data, brigthness,...
And if you want to boot into recovery it only reboots
data working!!and brigthness i dont know but a think is working well too...and boot into recovery...see the original thread
Am stuck on "INITIATING SWAGGER" screen, any suggestion ??
circassian92 said:
Am stuck on "INITIATING SWAGGER" screen, any suggestion ??
Click to expand...
Click to collapse
wipe all and reflash
pozinhos said:
wipe all and reflash
Click to expand...
Click to collapse
I did that many times but no success
---------- Post added at 09:14 AM ---------- Previous post was at 09:03 AM ----------
Okay it booted now, but blank screen, I can drag the notification bar down and open settings, but there is no home screen
I cant do anything else, any solution ?
Hey guys, how is this ROM about battery and overall performance, smoothness?
Worth changing from Maclaw's AOSP B2?
shiftyHungary said:
Hey guys, how is this ROM about battery and overall performance, smoothness?
Worth changing from Maclaw's AOSP B2?
Click to expand...
Click to collapse
test your self and put here your feedback we are apreciated bro
circassian92 said:
I did that many times but no success
---------- Post added at 09:14 AM ---------- Previous post was at 09:03 AM ----------
Okay it booted now, but blank screen, I can drag the notification bar down and open settings, but there is no home screen
I cant do anything else, any solution ?
Click to expand...
Click to collapse
I had the same problem. After Install the Loading Splash stayed or
an empty screen was shown as desktop.
Solution:
Using Recovery you must
- Wipe /data and /cache
- Mount /data and /system (!)
- Install the new version from ZIP file
It seems as the file is seen as an update, the mount is manually needed.
After that this ROM is the best I have tested so far, I am using now
permanently. The Wifi is now much more stabile, did download 7,2GB
of cards in Sygic with no problems. Also SPB 3D works nice on this,
could even remove Nova Launcher to save some space. Skype
also works nicely.
Thank you for the good work.
Update your updater script from mine. It's looking like your updater script doesn't flashs to data
msnnsm said:
Update your updater script from mine. It's looking like your updater script doesn't flashs to data
Click to expand...
Click to collapse
but for me are working well and i dont have any problem :\
i like it ,
when i first flashed he was stuck on initaling swagger.
I returend recovery did a factory reset and formated system. then flash again and it worked.
I love it already , smooth , fast. I only need to flash gapps and test battery life
Good Work !
Edit: Bug found: 'Reboot Recovery' on the power menu doesn't work for me. he just boots as normal. (CWM 6.0.1.2)
I flashed gapps but still dont have any of them. What I should do?
xzaxox said:
I flashed gapps but still dont have any of them. What I should do?
Click to expand...
Click to collapse
Did you get any error during the flash ?
farmtool33 said:
Did you get any error during the flash ?
Click to expand...
Click to collapse
No. It says "succesfully".
xzaxox said:
No. It says "succesfully".
Click to expand...
Click to collapse
Go to your recovery
-Format System
-Wipe data , factory reset
-install AOKP
-Install GApps
-Reboot
Try that
farmtool33 said:
Go to your recovery
-Format System
-Wipe data , factory reset
-install AOKP
-Install GApps
-Reboot
Try that
Click to expand...
Click to collapse
Done that allready but still no gapps :/
Maybe you need mounted system n data first, then flash gapps.
Some times it worked for me
Sent from my GT-S5660 using XDA Premium App
wiwid.colgate said:
Maybe you need mounted system n data first, then flash gapps.
Some times it worked for me
Sent from my GT-S5660 using XDA Premium App
Click to expand...
Click to collapse
could work
So guys how does this rom copes with battery?
Sent from my GT-S5660 using xda app-developers app