Hi guys, I'm new @ xda.
I found this tuts of how to enable navigation bar for cm 9 http://forum.xda-developers.com/showthread.php?t=1364757
so I try to follow the instruction to make the navi bar work in Cm9
and oke finally I can make it work to Cm9, and I have made a flashable zip
VERSION 1
Cm9-Navigaion bar.zip : https://www.dropbox.com/s/g2256l42qbtr8np/CM9beta1-navibar.zip
THIS MOD IS ONLY FOR CM-9
Instruction :
Go to cwm recovery
mount & storage
change mount system into unmount system,
back to cwm menu
install zip
chose cm9-Navibar.zip
reboot
Credit & Thanks to :
Sir. arco68 , for Cm.9.
Sir. evilisto, for tuts navigation bar
and to disable navibar :
flash this trhough cwm :
mount & storage
change mount system into unmount system,
back to cwm menu
install zip
chose disablenavibar.zip
reboot
DisableNavibar.zip https://www.dropbox.com/s/v7cv1d4cfdramz7/disableNavibar.zip
optional 1
OKE GUYS, finally I can turning off the capacitive light of the phisical Home, Back, Menu button and also the button function
Enable Navigation Bar, Disable Capacitive light & physical Menu, Home & Back buttons
Instruction :
install Navi-disablePhysical_button.zip with the same method :
Cwm
mount & storage
change mount system into unmount system
back to cwm menu
install zip
chose zip
select Navi-disablePhysical_button.zip : https://www.dropbox.com/s/zypdali1bfocpf4/Navi-disablePhysical_button.zip
reboot
after done
if you want to Enable the physical button function Install EnableTouchkey : http://db.tt/n1adEFnH
optional 2
Push NavigationBar.apk to system/app/here folder
mount : rw-r-r
set permission
V V
V
V
reboot
Navigation Bar.apk : http://db.tt/3HsLDfJx
VERSION 2, with dock
what's in this version 2 with dock ?
1. Modified framework-res.apk & systemUI.apk
2. Enable ICS Navigation Bar with dock, Disable capacitive light , back, menu button but not its function
how to install ?
put Navibar(theme)-offLight.zip on sdcard
Navibar(theme)-offLight.zip :https://www.dropbox.com/s/ggverpex9b0y34n/Navibar(theme)and-offLight.zip
go to CWM rcovery
mount &storage
change mount system into unmount system
back to CWM menu
install zip from sd
chose zip
select Navibar(theme)-offLight.zip
Reboot
done reboot
Push NavigationBar.apk to system/app/here folder
mount : rw-r-r
set permission
V V
V
V
reboot
Navigation Bar.apk : http://db.tt/3HsLDfJx
theme Icon for VERSION 2
Ekstrak this,.one pack : https://www.dropbox.com/s/s1jcwttfis78wsr/Icon-NewDock(EkstrakThis).zip
Ekstrak the zip, and you'll get five flashable.zip theme icon for VERSION 2
You only can install those zip if you have already install the mod VERSION 2 Navibar(theme)-offLight.zip
Ekstrak this pack(3 themes), : http://db.tt/K3FWXwiI
REVERT BACK STOK CM9
flash this zip if you want go revert back to stok fresh CM9. without any mod
http://db.tt/kIFnFwsT
"If you like my Mod, please to press the THANKS BUTTON
Adi_ai****eru said:
hy guys, im new @ xda.
i found this tuts of how to enable navigation bar for cm 9 http://forum.xda-developers.com/showthread.php?t=1364757
so I try to follow the instruction to make the navi bar work in Cm 9 beta 1,
and oke I have made a flashable zip
https://www.dropbox.com/s/g2256l42qbtr8np/CM9beta1-navibar.zip
Intruction :
Go to cwm recovery
mount & storage
unmount system
install zip
chose zip
reboot
credit & thanks to :
arco68
evilisto
Screenshoot :
1.https://www.dropbox.com/s/jfvemtf1gl296f6/PhotoFancie2012_09_21_19_38_11.jpeg
2. https://www.dropbox.com/s/vtuu6oi1ioktv1u/PhotoFancie2012_09_21_19_39_36.jpeg
and to disable navibar :
flash this trhough cwm :
mount & storage
unmount system
install zip
chose disablenavibar.zip
reboot
DisableNavibar.zip https://www.dropbox.com/s/v7cv1d4cfdramz7/disableNavibar.zip
Click to expand...
Click to collapse
Can you give me detailed instructions? Cant seem to follow the unmount system part. Sorry for noob question. Thanks
ummm.. i THINK it should be "mount system" instead of "unmount system" in your instruction. the system is unmounted by default in cwm (CMIIW), i tried several times with no luck hahaha then i tried to mount the system then flash the zip file aaand it works :laugh:
CMIIW, im not an expert
thanks in advance
btw do you know how to turn off the capacitive buttons' light?
marionite said:
Can you give me detailed instructions? Cant seem to follow the unmount system part. Sorry for noob question. Thanks
Click to expand...
Click to collapse
btw, I have the latest cwm 6 intalled.. but may be for lower version of cwm try a normal install
monster.kancut said:
ummm.. i THINK it should be "mount system" instead of "unmount system" in your instruction. the system is unmounted by default in cwm (CMIIW), i tried several times with no luck hahaha then i tried to mount the system then flash the zip file aaand it works :laugh:
CMIIW, im not an expert
thanks in advance
btw do you know how to turn off the capacitive buttons' light?
Click to expand...
Click to collapse
oke I'll try next update.
Nice work bro
ibanez7 said:
Nice work bro
Click to expand...
Click to collapse
sumon mastah Recognized themer.. LOLs...
Adi_ai****eru said:
btw, I have the latest cwm 6 intalled.. but may be for lower version of cwm try a normal install
Click to expand...
Click to collapse
You gave a wrong step. It should be mounted to flash it. How can you install it if the system folder hasn't mounted?
dewadg said:
You gave a wrong step. It should be mounted to flash it. How can you install it if the system folder hasn't mounted?
Click to expand...
Click to collapse
bugs of Cwm maybe,
but try you dont have to unmount
but do fix permission after done install it
and it work I use my method
How To install THE RIGHT WAY
dewadg said:
You gave a wrong step. It should be mounted to flash it. How can you install it if the system folder hasn't mounted?
Click to expand...
Click to collapse
I will Tell you how to install this.
1. Go to CWM.
2. Go to mounts and storage
3. mount/system
4. Install Zip from sd card
5. Choose zip
5.Reboot.
Automatically Navigation Bar should be enabled:laugh:
jassim007 said:
I will Tell you how to install this.
1. Go to CWM.
2. Go to mounts and storage
3. mount/system
4. Install Zip from sd card
5. Choose zip
5.Reboot.
Automatically Navigation Bar should be enabled:laugh:
Click to expand...
Click to collapse
have you succes install my mod ? ..
have you press the THANKS BUTTON ?
able to install but unable to remove
jinghuanpang said:
able to install but unable to remove
Click to expand...
Click to collapse
I have given the flashable.zip to disable navi bar n revert back .. follow the instruction
could I disable it without flashing via cwm? like turning off in setting.
vlorience said:
could I disable it without flashing via cwm? like turning off in setting.
Click to expand...
Click to collapse
no you could not, you only can add or change the position button by editting @ system setting , Navigation Bar.
but I'll try to make the nav bar can be disable trough system Setting menu .. you just keep up to date with this Mod
dont forget to press the THANKS BUTTON here
Adi_ai****eru said:
I have given the flashable.zip to disable navi bar n revert back .. follow the instruction
Click to expand...
Click to collapse
yeah. i flashed. nothing happens
jinghuanpang said:
yeah. i flashed. nothing happens
Click to expand...
Click to collapse
enable navibar and disable it are using the same method of installing , try again
Thanks to this mod.. do you know how to disable the soft key light?
Thanks
utingbato said:
Thanks to this mod.. do you know how to disable the soft key light?
Thanks
Click to expand...
Click to collapse
yes I know how, but I skipped that step when I modify the framework-res.apk , but I'll try in the next update Mod..
I think the resolution changed..
Related
Version 2 spike speedy rom for galaxy released
Powered by voodoo lagfix Ver-5-pre6
Replace tw launcher with modified and faster tw launcher
No need to install base rom first.
Fully deoxed and zipaligned.
Rooted and Busybox
Recovery 2e
Removed :
Live wallpapers
All Samsung Widgets
Aldiko ebook
Allshare
Daily Briefing
Email
Layer
Latitude
Maps
Memo
Mini diary
Navigation
Places
Press reader
Talk
Tinkfree office
Voice dialler
Voice recorder
Voice search
Write and go
Added :
Voodoo Lagfix version-5-pre6
Modified touchwiz Launcher
Android Stock Lockscreen
Black wallpaper & nice status bar icon (nexus icon)
Be watchful:
This install will WIPE all user data.
Download :
XWJP6 Spike Speedy Edition v2.1
Mediafire
JPJPA Spike Speedy Edition v2.0
Mediafire
How to install:
You can find it in post 2
Pics :
For install default programs you can download programs below and rename zip file to update and copy it to internal memory and install it from recovery(2e)
Touchwiz
Live wallpapers
Islamic Programs
Aldiko ebook
Allshare
Email
Layer
Memo
Mini diary
Tinkfree office
BuddiesNow
Days
Flash Player from JP6
Voice recorder
Writeandgo
special thanks to :
Supercurio
DocRambone
Tayutama
kalpik
Install guide :
1. Disable any lagfix if have it installed
2. Make sure have the 2e recovery. If your rom is froyo and you don't have 2e recovery, use cf-root by chainfire
3. Make sure you have a backup of your /efs (not mandatory, but highly recommended).
4. Factory reset is NOT required, but is recommended. Wipe cache and dalvik cache if you’re not performing a factory reset.
Installation Steps:
1. Download the ROM and put Spike Speedy Edition v2.0.zip on your internal memory
2. Download clockworkmod recovery from here. You *need* Clockworkmod, this won’t work with stock recovery.
3. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
4. If you had Voodoo installed prior to installing this ROM (eclair or froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo". If you’re coming from sztupy’s kernel, make sure you have disabled all Lagfixes from CWM.
5. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
6. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
7. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
8. Select “choose zip from sdcard” and then select Spike Speedy Edition v2.0.zip. Then choose yes.
9. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
10. The first boot will take some time as the ROM will deodex
Special tnx to kalpik for install guide.
nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...
Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx
Can you add polish locale to next release?
d.fx said:
Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx
Click to expand...
Click to collapse
i will do that
sardor said:
Can you add polish locale to next release?
Click to expand...
Click to collapse
ok , i will make update.zip for add many lang soon
eikka85 said:
nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...
Click to expand...
Click to collapse
I tested market again and it works fine
You must check your connection
thanks spike the rom is nice and responsive. really nice job, keep up the good work.
Mirror for JPJPA version
Rapidshare
could u give the link of"all samsung widgets" plz?
hi
language romanian... please
thank!!
thanks sir ,, realy realy its perfect rom and hope to continue to v3
i cocked JPM/JP6 spike speedy and i upload it soon
be ready ...
Thanks sir but can you tell me whats the diffrent between jpa and jp6 and jpm in performance?
XWJP6 version added . go first post for download
How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...
xidium said:
How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...
Click to expand...
Click to collapse
no
1- download two parts
2- extract with winrar to XWJP6 Spike Speedy Edition v2.1 folder
3- open XWJP6 Spike Speedy Edition v2.1 folder and copy XWJP6 Spike Speedy Edition v2.1.zip to internal memory ...
Whats languages in this rom and changelog?
hi
thank.. jp6..
I need maps (update.zip)
plzzzzz.i want "All Samsung Widgets" in my galaxy.
hi all....total Android noob here...
after a lot of research and some 'should i or shouldn't i' episodes, i've successfully rooted my wonder in order to flash to cm9. along the way i've discovered that it is 'desirable' to have cwm 6 installed first.
from what i understand, there are 2(?) ways of doing this...either via stock recovery in the ADB(?) shell or via ODIN...
ODIN *seems* to be the preferred method though. but here lies my problem.....i can't get it to work...i've found several links to download odin, and several links to download cwm 6.....also several different sets of instructions as to how to actually do it.....
it would really help if i had one set of downloads for odin and cwm 6 and one set of step by step, clear, precise, tried and tested instructions....
i've also tried nandroid backup as a 'partial' alternative to cwm 6, but it's not compatible with my phone.
additional info (if needed).....
os version - gingerbread 2.3.5
carrier - 3UK
kernel version - 2.6.35.7-perf-I8150XXK18-CL604835
[email protected] #3
many thanks in advance.....
Keith
Here is the way to flash CWM6 using Odin, if you wanna flash CWM5 just use the md5&ops files for CWM5, which you may need to find them somewhere
1. Download Odin & Ancora.ops & recovery-clockwork-6.0.1.2-ancora.tar.md5
2. Enable USB Debugging in Setting-Application- Development
3. Open Odin.
- Select the ops file, and enable one package in options
- then load the md5(recovery-clockwork-6.0.1.2-ancora.tar.md5) file with the One Package button.
- put ur phone it into download mode, first turn off phone, then hold Volume Down + Home + Power Button for a while.
- Phone will turn on and show some screen, then you plug in usb cable (it may look for the driver through Windows Update so please enable your computer's Internet connection).
Get the files (please find Odin from somewhere else): http://forum.xda-developers.com/showthread.php?t=1446593
Good luck and sorry for my bad English~
THESE STEPS NEEDS ROOT & BUSYBOX, DOESN'T NEED PC & ODIN..
FOR BEST RESULT, UPDATE YOUR SUPERUSER.APK, SU BINARY, AND BUSYBOX
-go here http://www.mediafire.com/?6wkwiko5gmqhuyr link by acro68 the author of W's CM9 and who made CWM possible to our device
-download and extract it..
-put the recovery.img in /mnt/sdcard
-download "Terminal Emulator" by Jack in market (FREE OF COURSE)
-open it then type "su" and click enter
-allow root access..
-then type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13" then click enter <~ THAT IS "0" (ZERO) not "O" word..
-then some text will show in bottom
-exit terminal.. check the recovery by turning off the device then turn on with volume up botton, home button, and power button pressed together.. until "Galaxy W" screen shows up, release the power button only.. then you will enter CWM
-navigate with up (up) n down (down) vol button and home keys (select) and power (back) and click "reboot system now" to reboot
HAPPY FLASHING
*I'm not responsible if your phone bricked*
thank you both for your responses....greatly appreciated....
i thought i'd try IvanKurnia's method first as i thought it looked the easiest
it worked first time i'm happy to report........
i can finally feel a dose of CM9 goodness coming on.....yaay..lol
keithross39 said:
thank you both for your responses....greatly appreciated....
i thought i'd try IvanKurnia's method first as i thought it looked the easiest
it worked first time i'm happy to report........
i can finally feel a dose of CM9 goodness coming on.....yaay..lol
Click to expand...
Click to collapse
You are always welcome...Glad to hear that...Good luck to your CM9 ^^ Now we got more choices of CM9 since quite a number of people had ported AOKP and some other builds to it
MyDeSTiNaTe said:
2. Open Odin.
- Select the ops file, and enable one package in options
- then load the md5(recovery-clockwork-6.0.1.2-ancora.tar.md5) file with the One Package button.
- put ur phone it into download mode, first turn off phone, then hold Volume Down + Home + Power Button for a while.
- Phone will turn on and show some screen, then you plug in usb cable (it may look for the driver through Windows Update so please enable your computer's Internet connection)
Click to expand...
Click to collapse
did you forget to add -enable the "USB Debugging" on Setting-?
if you're gonna flashing stock rom with ODIN, you're not gonna need USB Debugging setting..
but if recovery, you need it..
IvanKurnia said:
did you forget to add -enable the "USB Debugging" on Setting-?
if you're gonna flashing stock rom with ODIN, you're not gonna need USB Debugging setting..
but if recovery, you need it..
Click to expand...
Click to collapse
Oh yea, thanks for reminding, I always enabled it so I forgot to mention that
Hi,
how can I know if CWM6 is compatible with my kernel?
Thanks a lot.
Model code: GT-I8150
Android version: 2.3.6
Version base band: I8150XXKL3
Kernel version: [email protected] #3
Build version: GINGERBREAD.XXLA2
as far as I know, recovery has it's own kernel..
Hi all...installed CM9 last night...all went well....
Have noticed that there's no Task Manager or Media Player Apps....is it just that I'm looking right at them and not recognizing them for what they are, or are they not included in the build?....if they're not included, which 3rd party apps would you recommend for use instead?.....
Also, for information, I had ONE minor glitch occurrence when using the camera.....as follows...
Started camera app..
Changed from primary to secondary (self portrait) camera...
Changed the exposure setting to +2....
App force closed.....
Apart from that, no other issues to report.....
A big thanks to everybody involved for taking the Galaxy W and producing such a fantastic alternative to 'stock'.....
PS......will cm10 be ported to the W?....lol...(got the Modding bug now . )
Sent from my GT-I8150 using xda app-developers app
Hi again....can confirm that the force close camera issue (as described above), is a continuing problem on all increments of exposure compensation setting. With that in mind, is there a 3rd party camera app available that has the same functionality as the installed app but without the gimmicks?......
As mentioned before, CM9 really is a welcome step up from the 'stock' OS, so if the camera issue is the only issue with CM9, it's still worth 'taking that leap'.....
Once again, many thanks for the work put in on this....Keith
Sent from my GT-I8150 with CM9 using xda app-developers app
better you post that on "CyanogenMod 9 bug report & discussion thread" by THE-E.. so then the bug will added to the list
CM9 very good right if there weren't any bugs..
IvanKurnia said:
THESE STEPS NEEDS ROOT & BUSYBOX, DOESN'T NEED PC & ODIN..
FOR BEST RESULT, UPDATE YOUR SUPERUSER.APK, SU BINARY, AND BUSYBOX
-go here http://www.mediafire.com/?6wkwiko5gmqhuyr link by acro68 the author of W's CM9 and who made CWM possible to our device
-download and extract it..
-put the recovery.img in /mnt/sdcard
-download "Terminal Emulator" by Jack in market (FREE OF COURSE)
-open it then type "su" and click enter
-allow root access..
-then type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13" then click enter <~ THAT IS "0" (ZERO) not "O" word..
-then some text will show in bottom
-exit terminal.. check the recovery by turning off the device then turn on with volume up botton, home button, and power button pressed together.. until "Galaxy W" screen shows up, release the power button only.. then you will enter CWM
-navigate with up (up) n down (down) vol button and home keys (select) and power (back) and click "reboot system now" to reboot
HAPPY FLASHING
*I'm not responsible if your phone bricked*
Click to expand...
Click to collapse
It worked great, thanks a lot!
I would just suggest to add the following step BEFORE flashing CWM6, in order to have a backup of the existing recovery image:
dd if=/dev/block/mmcblk0p13 of=/sdcard/mybackup.img
[.::MDT::.] said:
It worked great, thanks a lot!
I would just suggest to add the following step BEFORE flashing CWM6, in order to have a backup of the existing recovery image:
dd if=/dev/block/mmcblk0p13 of=/sdcard/mybackup.img
Click to expand...
Click to collapse
yes.. add it.. don't forget to access root first by typing "su"
IvanKurnia said:
yes.. add it.. don't forget to access root first by typing "su"
Click to expand...
Click to collapse
Actually it worked for me even without typing "su" before...
[.::MDT::.] said:
Actually it worked for me even without typing "su" before...
Click to expand...
Click to collapse
what?! without typing "su" you will not be able to access root..
eh, did you have your USB Debugging enabled? maybe because of it..
Moving CWM6 backups to PC
Hi guys, I have a question here. How can I move my backups I created using CWM6 to a PC so I can free up my internal sd space? I don't think those folders on clockworkmod\backup are full backups because the blob folder is much larger.
I'm using Samsung Galaxy W I8150, CWM 6.0.1.2, CM9 Alpha7.
buruguduy said:
Hi guys, I have a question here. How can I move my backups I created using CWM6 to a PC so I can free up my internal sd space? I don't think those folders on clockworkmod\backup are full backups because the blob folder is much larger.
I'm using Samsung Galaxy W I8150, CWM 6.0.1.2, CM9 Alpha7.
Click to expand...
Click to collapse
just copy or cut the "clockworkmod" folder, to prevent file corrupt, rar or zip it.. if want to restore, copy or cut back to your SD..
safe backup
IvanKurnia said:
just copy or cut the "clockworkmod" folder, to prevent file corrupt, rar or zip it.. if want to restore, copy or cut back to your SD..
safe backup
Click to expand...
Click to collapse
did you already tried it? if i cut it manually from my phone, is there a risk CWM would be corrupted? sorry noob here..
buruguduy said:
did you already tried it? if i cut it manually from my phone, is there a risk CWM would be corrupted? sorry noob here..
Click to expand...
Click to collapse
have already and safe.. BUT:
-make sure your USB Cable is still in good condition.. if you are not sure, DO NOT MOVE CABLE WHILE COPYING FILES..
-you had fast enough PC.. DO NOT COPY FILES WHILE LAGGING
-NO VIRUS ON YOUR PC..
-make sure NO SOFTWARE BLOCKING YOUR PHONE DRIVER..
-if you backup to external sd, BETTER USE CARD READER TO COPY THOSE FILES TO PC
-IF ZIPPING OR RARING FILES, DP NOT COMPRESS LIKE CRAZY (COMPRESS NORMAL OR JUST STORE -without compression-)
-always reject/unmount removeable drive TO PREVENT CORRUPT FILES ON YOUR SD, USB, OR ETC..
safe backup
Motorola Defy Mini XT320/XT321 all-in-one script/utility
I've ported mattlgroff's DROIDRAZR all-in-one Script to the Motorola Defy Mini XT320/XT321. This will make life easier and it will do it for you.
Make sure you have fastboot mode if not please refer to this guide for fastboot but there is a fastboot checker in option 6 but it won't install fastboot for you.
Link: http://forum.xda-developers.com/showpost.php?p=36199694&postcount=3
Options available:
1. Root your Motorola Defy Mini XT320/XT321
2. Install 2nd-init/TWRP Recovery
3. Overclock installation
4. Unroot Device
5. Wipe Data/Factory Reset
6. Fastboot checker.
7. Exit Utility
Instructions:
NEW PACKAGE & instructions
1. Download the EXE file at http://www.mediafire.com/?c81fnrtrki65e9i
2. Double click on the exe.
3. Choose an option by entering a number from 1 to 7
OLD PACKAGE & instructions
1. Download package at [REMOVED OLD LINK]
Please Download the fixed package at http://www.mediafire.com/?krxtemrthsz5ier
EXE Version: http://www.mediafire.com/?0kwmx4whjj1ua8c
2. Extract the zip file making sure all the files are in the same place.
3. Click on the batch file named 'DefyMiniUtility.bat'
4. Choose an option by entering a number from 1 to 7.
Credits to:
- Bernd.Defy for overclock module and Guitwo2 for init.d script
- Guitwo2 and jkkk88 for TWRP and aweosomeabhjeet for 2nd-init
- DoOMLoRD for unroot script
- Mattlgroff for the original DROID RAZR all-in-one script
If anyone knows if I missed a member for the credits, please PM me. Thanks
Make sure press thanks if it works
Guys please don't repost it as your own work, otherwise I'll report it and you will get banned from XDA.
NOTE: If you have previously used the old EXE to install TWRP then please remove the old folders by using these instructions using cmd before using updated exe to install TWRP;
1.
Code:
adb shell
2.
Code:
su
3.
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock11 /system
4.
Code:
rm -R /system/bootmenu
Then use the updated exe to install TWRP.
NOTE: If you don't like TWRP, you can download Guitwo2's Permanent CWM at http://forum.xda-developers.com/attachment.php?attachmentid=1875373&d=1365682716
Temporary CWM Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1875299&d=1365680458
2nd-init does NOT work in CWM Recovery
Thanks to @Guitwo2 for CWM Recovery.
Instructions on how to install Permanent CWM Recovery:
1. Make sure stericson-busybox is installed
2. Put XT320_bootmenuV2.zip in the root of your sdcard
3. Reboot into fastboot mode by typing this command in cmd:
Code:
adb reboot bootloader
4. Then type this command in cmd:
Code:
fastboot boot recovery.img
5. Then use volume keys to navigate and power button to select option. Select install zip from sdcard, then select XT320_bootmenuV2.zip and select yes to install the zip file
6. Then reboot device by selecting reboot device now.
CWM 6 has a bug where it asks you to 'disable recovery flash' when you select reboot system now make sure you select NO or you will soft brick your device.
Changelog:
-v2 No need to mount /sdcard in CWM Recovery. Fixed TWRP installation issues.
-v2.0.1 Released an .exe version of script, to simplify installation
-v2.0.1.1 Fixed bootmenu.zip
This can install a custom recovery?
This can install a custom recovery?
Thank you
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
same problem... someone can fix it? please
fca.sjc said:
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
Click to expand...
Click to collapse
sfoot13 said:
same problem... someone can fix it? please
Click to expand...
Click to collapse
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Thanks
rootdefyxt320 said:
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Click to expand...
Click to collapse
Ty for the quickly answer.
Btw, my gsm network wasnt working after the root process. If the same thing happens to someone else, just do a master reset and it will work again.
pull command is working now
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
fca.sjc said:
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
Click to expand...
Click to collapse
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
rootdefyxt320 said:
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
Click to expand...
Click to collapse
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
sfoot13 said:
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
Click to expand...
Click to collapse
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
rootdefyxt320 said:
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
Click to expand...
Click to collapse
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
sfoot13 said:
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
Click to expand...
Click to collapse
I've released an .exe version of my script. This should work now .
Link: http://www.mediafire.com/?0kwmx4whjj1ua8c
Thank u bro and sorry but i can't overclock it to 700 =/
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
OFF TOPIC.
Congrats on your well deserved mention on the portal.
sfoot13 said:
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
Click to expand...
Click to collapse
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
rootdefyxt320 said:
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
Click to expand...
Click to collapse
:good: Working! Thank u so much, now i have CWM working on my defy mini, i'm really thankful, thanks again
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
sfoot13 said:
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
Click to expand...
Click to collapse
Looks like 97bootmenu deleted itself, please reinstall the CWM zip again and it should work.
Note: This ROM is a Modified Stock ROM 4.2.1 with a few apps added and other features. Check below.
Based on Build : XOLO_Q1000_S101_130607
Friends, this CWM flashable ROM provides stock experience only with certain useful features and tweaks, no major UI changes have been done. It maybe useful for those who’ll are having problems rooting.
Stock kernel has been used.
Download link:
XOLO Q1000_mj
Features:
- Rooted( SuperSU is used)
- Deodexed.
- Busybox added.
- Init.d support(Some tweaks added )
- Few Build.prop tweaks.
- Custom bootanimation enabled ( You can add your ‘bootanimation.zip’ to ‘data/local’ folder)
- Bash shell support.
- Ubuntu fonts used.
- Percentage Battery icon.
- Beats Audio added.
- Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
Apps Added:
- Walkman Music Player and Volume+ equalizer app(Full Credits: @mahfoozceecy)Thank You very much!
- Holo Launcher.
- ReScan SD
- QuickPic
- Mobo Player
- LG Camera and others.
Flash it at your own risk
IMPORTANT PLEASE NOTE:
In order to avoid bootlooping issues, before flashing out the zip file, perform these steps:
(1) Remove the boot.img and meta-inf folder from that zip file..
(2) Then download this new meta-inf folder link-------------->https://drive.google.com/file/d/0B7kpQGwEs84ed0tKV1hZaC1wNmc/edit?usp=sharing
(3) Extract the meta-inf.zip. Put this new meta-inf folder inside the XOLO Q1000_mj ROM zip file .
(4) Follow instructions written below for clearing out your phone.
Now simply flash the ROM!
Extremely Sorry for inconvenience!
INSTRUCTIONS:
(1) Backup anything you want and go to CWM Recovery. This ROM will wipe your data.
(2) Wipe out everything:
- Factory reset
- Mounts and Storage/Format system.
- Again go to Advanced/Wipe Dalvik cache,battery stats.
This will make your phone into clean state.
(3) Install Zip from sdcard/choose zip file and reboot.
Credits:-
Thank these people if you want :
@mahfoozceecy
Android kitchen
UOT Kitchen
How You get 20Gb free ? in phone storage ?
External sd card is detected as phone storage and vice versa
Then Its Super Coool ..
Can You Mode Miui v5 Rom for this Future ?
Miui ROM v5 has already been uploaded for xolo q1000 and it works as well.
m_jani said:
Miui ROM v5 has already been uploaded for xolo q1000 and it works as well.
Click to expand...
Click to collapse
No bro i m saying can you add this future Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
In miui v 5.
Change the mount lines.
Change the values in(highlighted in yellow):
dev_mount sdcard--------------Change the sdcard0 to sdcard1 & '1' to '0'
dev_mount left_sdcard---------Change the sdcard1 to sdcard2 & '2' to '1'
Image link
m_jani said:
Change the values in(highlighted in yellow):
dev_mount sdcard--------------Change the sdcard0 to sdcard1 & '1' to '0'
dev_mount left_sdcard---------Change the sdcard1 to sdcard2 & '2' to '1'
Image link
Click to expand...
Click to collapse
I have to edit from pc then replace via root explorer and restart ?
Go to system/etc folder using some file manager with root explorer enabled.....and change the values as i have explained in the previous post
m_jani said:
Go to system/etc folder using some file manager with root explorer enabled.....and change the values as i have explained in the previous post
Click to expand...
Click to collapse
Thanks For fast and good reply
Thanks Hited
I have DOne Successfully But i m not able to install Apps in Phone storage (memory card)
greenlight093 said:
Thanks For fast and good reply
Thanks Hited
I have DOne Successfully But i m not able to install Apps in Phone storage (memory card)
Click to expand...
Click to collapse
Go to Settings/Storage....................select your 'default write disk' option and try.
m_jani said:
Go to Settings/Storage....................select your 'default write disk' option and try.
Click to expand...
Click to collapse
This option not available in miui v 5
It might be somewhere in settings idk exactly....m nt using miui rite now......ask miui porter maybe he can help
m_jani said:
Note: This ROM is a Modified Stock ROM 4.2.1 with a few apps added and other features. Check below.
Based on Build : XOLO_Q1000_S101_130607
Friends, this CWM flashable ROM provides stock experience only with certain useful features and tweaks, no major UI changes have been done. It maybe useful for those who’ll are having problems rooting.
Stock kernel has been used.
Download link:
XOLO Q1000_mj
(Note: Click on 'File' on top-left of the webpage and click 'Download')
Features:
- Rooted( SuperSU is used)
- Deodexed.
- Busybox added.
- Init.d support(Some tweaks added )
- Few Build.prop tweaks.
- Custom bootanimation enabled ( You can add your ‘bootanimation.zip’ to ‘data/local’ folder)
- Bash shell support.
- Ubuntu fonts used.
- Percentage Battery icon.
- Beats Audio added.
- Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
Apps Added:
- Walkman Music Player and Volume+ equalizer app(Full Credits: @mahfoozceecy)Thank You very much!
- Holo Launcher.
- ReScan SD
- QuickPic
- Mobo Player
- LG Camera and others.
Flash it at your own risk
For those who are having problems related to boot issue, please make sure you have proper CWM Recovery installed. For that you can use SP Flash Tool:
SP Flash Tool folder, boot.img ,scatter file, recovery.img.
Steps:
- Make sure you have all drivers installed i.e. MTK6589 Drivers x86-DroidDict(link) and VCOM drivers(link) installed. Click on 'File' on top-left of the webpage and click 'Download'.
- Click on Flash_tool
- Click on Scatter-loading and select the file 'MT6589_Android_scatter_emmc'
- You will see 'BOOTIMG' & 'RECOVERY' has been selected. Make sure its the one present in the same folder where the 'scatter' file has been placed.
- Switch OFF your phone completely,remove the battery and re-insert it.
- Connect your XOLO Q1000 to the computer.
- Click on 'Download' button and you will see your phone being detected and the flash process will start.
- You will be confirmed when its done with the Green circle.
- Now, keep Volume up+Power button on your phone pressed nad in a few seconds you will get your CWM Recovery screen. Then flash this ROM.
INSTRUCTIONS:
(1) Backup anything you want and go to CWM Recovery. This ROM will wipe your data.
(2) Wipe out everything:
- Factory reset
- Mounts and Storage/Format system.
- Again go to Advanced/Wipe Dalvik cache,battery stats.
This will make your phone into clean state.
(3) Install Zip from sdcard/choose zip file and reboot.
Credits:-
Thank these people if you want :
@mahfoozceecy
Android kitchen
UOT Kitchen
Click to expand...
Click to collapse
Not Working...After flashing this ROM , bootlooping starts!! Can you post the original stock ROM without any tweaks that can be flashed through the CWM directly not by sp flash tool?
See you will have to flash boot.img and recovery.img from this thread.....using spflash tools scatter file method......only these three files you will hve to flash..... then install the rom zip.....m sure it will work 100%....do reply if any probs
arkaredevil said:
Not Working...After flashing this ROM , bootlooping starts!! Can you post the original stock ROM without any tweaks that can be flashed through the CWM directly not by sp flash tool?
Click to expand...
Click to collapse
Ok, just confirm if you need the stock rom cwm flashable zip?
m_jani said:
Ok, just confirm if you need the stock rom cwm flashable zip?
Click to expand...
Click to collapse
No thnks..problem solved:victory:..u can try MIUI ROM..it's awesome!!
arkaredevil said:
No thnks..problem solved:victory:..u can try MIUI ROM..it's awesome!!
Click to expand...
Click to collapse
Great you must be happy.......I have tried the MIUI ROM by @Javajohn and it worked great. However, am not a fan of MIUI so reverted back to stock based rom!
m_jani said:
Note: This ROM is a Modified Stock ROM 4.2.1 with a few apps added and other features. Check below.
Based on Build : XOLO_Q1000_S101_130607
Friends, this CWM flashable ROM provides stock experience only with certain useful features and tweaks, no major UI changes have been done. It maybe useful for those who’ll are having problems rooting.
Stock kernel has been used.
Download link:
XOLO Q1000_mj
(Note: Click on 'File' on top-left of the webpage and click 'Download')
Features:
- Rooted( SuperSU is used)
- Deodexed.
- Busybox added.
- Init.d support(Some tweaks added )
- Few Build.prop tweaks.
- Custom bootanimation enabled ( You can add your ‘bootanimation.zip’ to ‘data/local’ folder)
- Bash shell support.
- Ubuntu fonts used.
- Percentage Battery icon.
- Beats Audio added.
- Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
Apps Added:
- Walkman Music Player and Volume+ equalizer app(Full Credits: @mahfoozceecy)Thank You very much!
- Holo Launcher.
- ReScan SD
- QuickPic
- Mobo Player
- LG Camera and others.
Flash it at your own risk
For those who are having problems related to boot issue, please make sure you have proper CWM Recovery installed. For that you can use SP Flash Tool:
SP Flash Tool folder, boot.img ,scatter file, recovery.img.
Steps:
- Make sure you have all drivers installed i.e. MTK6589 Drivers x86-DroidDict(link) and VCOM drivers(link) installed. Click on 'File' on top-left of the webpage and click 'Download'.
- Click on Flash_tool
- Click on Scatter-loading and select the file 'MT6589_Android_scatter_emmc'
- You will see 'BOOTIMG' & 'RECOVERY' has been selected. Make sure its the one present in the same folder where the 'scatter' file has been placed.
- Switch OFF your phone completely,remove the battery and re-insert it.
- Connect your XOLO Q1000 to the computer.
- Click on 'Download' button and you will see your phone being detected and the flash process will start.
- You will be confirmed when its done with the Green circle.
- Now, keep Volume up+Power button on your phone pressed nad in a few seconds you will get your CWM Recovery screen. Then flash this ROM.
INSTRUCTIONS:
(1) Backup anything you want and go to CWM Recovery. This ROM will wipe your data.
(2) Wipe out everything:
- Factory reset
- Mounts and Storage/Format system.
- Again go to Advanced/Wipe Dalvik cache,battery stats.
This will make your phone into clean state.
(3) Install Zip from sdcard/choose zip file and reboot.
Credits:-
Thank these people if you want :
@mahfoozceecy
Android kitchen
UOT Kitchen
Click to expand...
Click to collapse
Hey. I already [email protected] the recovery andall.. I ttriedto flash this rROM. But started bootlooping.. WWhat do I do? Please reply fast..
Hey can anyone upload this ROMs stock gallery.apk? Thanks a ton!
HOW TO ROOT YOUR MICROMAX A58
1. go to settings-> Security-> enable Unknown sources.
2. go to about phone in in settings -> About phone -> tap on the build number several times to enable developer options
3. in settings-> Developer options -> enable Usb Debugging
4. Now download framaroot 1.8.1 apk. download link attached. (Thanks to "alephzain" for this awesome app)
(link to his thread http://forum.xda-developers.com/showthread.php?t=2130276 )
5. install it
6. open and click Boromir exploit
7. voila ur phone is rooted.
8. now reboot to see super su in app drawer
7. check it using root checker app from play store.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
click thanks if i helped..
CUSTOM RECOVERY SEE BELOW POST
Ctr , twrp, gravity box, link2sd
CUSTOM RECOVERY
Guys this has been developed by @yuweng @dhinesh77 and @carliv (Master Shifu)
Hats off to the guys for their awesome work.
Dont flash cwm recovery only flash CTR or TWRP recovery because our system format is UBIFS..
just download the CTR auto porting tool from the below thread
http://forum.xda-developers.com/showthread.php?t=1825722
Click to expand...
Click to collapse
(see for "Added on Jan 17, 2014
CTR v2.1 for MTK devices with ubifs ONLY " in the thread)
extract and run the program.
don't forget to install adb drivers before using the above tool. you can find the drivers here.. select other option in phone model.
http://www.mediafire.com/download/seg916ycv20cxj7/drivers.rar
ctr recovery is fully functional....
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
sorry TWRP recovery not working in this method
Hi here is the fully working TWRP recovery for Micromax A58
Quote:
DOWNLOAD recovery from
http://www.mediafire.com/download/9zpdq057829ltbj/recovery.img
Click to expand...
Click to collapse
OR
from the attachment below
STEPS TO INSTALL:
TO FLASH USING MOBILE
Click to expand...
Click to collapse
Flash using Mobileuncle tools (need a rooted phone)
-->Download the recovery and Put it in root of your SDCARD (ROOT OF SDCARD MEANS DON'T PUT THE FILE IN ANY FOLDER)
-->Open Mobile uncle tools and select Recovery Update
-->Flash recovery file
-->Done
Now reboot to recovery to check.....
Credits:
christiantroy
@yuweng
@Dees_Troy
@carliv
@dhinesh77
@dhinesh77
Source
https://github.com/dhinesh77/Team-Win-Recovery-Project
Click to expand...
Click to collapse
link to @dhinesh77 thread
http://forum.xda-developers.com/showthread.php?t=2615386
Click to expand...
Click to collapse
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
STEPS FOR REBOOTING INTO RECOVERY
1. switch of the mobile
2. remove the battery
3. replace the battery
4. hold the power button and volume up button until you see an android robot
5. now press the power button again to go into recovery.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Steps for installing Gravity box
download the xposed module apk from the attachment or from
http://repo.xposed.info/module/de.robv.android.xposed.installer
Click to expand...
Click to collapse
1. After installing apk reboot the phone
2. open the app and select download option
3. now browse to find gravity box[JB] (i mean for jelly bean os)
4. download the latest version
5. install it
6.now go back to modules menu in xposed installer app and tick the gravity box option
7. now reboot your phone
8. enjoy using gravity box
https://www.youtube.com/watch?v=O7p2kW8-nnw
STEPS FOR MAKING LINK2SD WORK
Thanks to @abi.z for the scripts
Steps
1. Partition your sd card to have an ext4 2nd partition. 1 gb partiton max (adviceable) (ext3,ext4 fat32 confirmed working)
2. Install Link2sd from playstore. (dont open it)
3. Copy attached install-recovery.sh to /etc/ using any file manager with root access.
4. open terminal emulator app. and type the following command without quotes
"su" (press enter)
"mkdir /data/sdext2" (press enter)
"chmod 777 /etc/install-recovery.sh" (press enter)
5.Done!! Reboot your system and check link2sd->Storage info to see the mounted partition details.
For people who want to use other partitions
Make the following changes in the mount command in case you are using a different partition/filesystem
Open your install-recovery.sh and
Replace ext4 with ext2/ext3/vfat depending on you second partition.
If using a partition other than 2nd partition, Replace either mmcblk0p2 with mmcblk0p3 OR 179:2 with 179:3 or so on depending on your partition number
then EXECUTE the script or REBOOT for the changes to take place.
INSTALLING VIPER EQUALIZER FOR QUALITY SOUNDS
I HAVE TESTED VIPER FOR ANDROID FX NOT XHiFI AND IS WORKING GR8 IN OUR PHONES
1. Download, extract and copy ViPER4Android_FX.apk (FX version v2.3.2.2 )to your device.
2. Install the apk as USER app or SYSTEM app is up to you.
3. Run FX app from app drawer, allow root access if asked.
4. When driver installation prompted, choose Yes.
5. V4A auto detects your CPU and show available driver modes
6. Choose your desired selection.
7. After installation done, Reboot device.
8. now open the app and select compatibility mode for audio to work.
TO DOWNLOAD THE APP GO TO THE BELOW FORUM
FORUM LINK:
http://vipersaudio.com/blog/?page_id=48
All stock items for micromax A58
< STOCK ITEMS
DRIVERS : http://www.4shared.com/rar/sWXxgEmM/Mobistel_Cynus_T1_Drivers_x86.html
STOCK ROM : https://drive.google.com/uc?id=0B6-h6iUVgfhJbWRIYW9MNmV0UzQ
STOCK BOOT.IMG : http://www.mediafire.com/view/id21q1m9a34b5dr/boot.img
STOCK RECOVERY : http://www.mediafire.com/view/g8tkf2a7qqv0zpu/recovery.img
SP_Flash_Tool : http://www.4shared.com/zip/xsHShvMw/SP_Flash_Tool_exe_v313320187.html/>
DONT FORGET TO CLICK THANKS IF I HELPED
Click to expand...
Click to collapse
confused!!!!
@dhinesh77 bro link2sd app is not working on my phone what about yours??
Do you know any way to fix it. it says mount script cannot be created, no such file or directory
Can we change ubifs to ext4 format.. Or is there any custom roms possible.
I have installed gravity box via xposed module and its really awesome on our phone.
Waiting for ur reply!!!!!:fingers-crossed:
alanvmathew said:
@dhinesh77 bro link2sd app is not working on my phone what about yours??
Do you know any way to fix it. it says mount script cannot be created, no such file or directory
Can we change ubifs to ext4 format.. Or is there any custom roms possible.
I have installed gravity box via xposed module and its really awesome on our phone.
Waiting for ur reply!!!!!:fingers-crossed:
Click to expand...
Click to collapse
I didnt used link2sd so far,
We cant change ubifs to ext4 unless got kernel sources
still custom roms are distant dream because of low system partition memory
dhinesh77 said:
I didnt used link2sd so far,
We cant change ubifs to ext4 unless got kernel sources
still custom roms are distant dream because of low system partition memory
Click to expand...
Click to collapse
Oh it hurtz.
Can we flash recovery using mobile uncle tools??? Or we can't? If we can then I all make a tutorial for it here.
alanvmathew said:
Oh it hurtz.
Can we flash recovery using mobile uncle tools??? Or we can't? If we can then I all make a tutorial for it here.
Click to expand...
Click to collapse
I tried with recovery manager it worked, didnt tried with mobileuncle app
dhinesh77 said:
I tried with recovery manager it worked, didnt tried with mobileuncle app
Click to expand...
Click to collapse
kewl ll make one then...... what happened to link2sd bro?? did u try?
or is there any other script that can work for us?
alanvmathew said:
kewl ll make one then...... what happened to link2sd bro?? did u try?
or is there any other script that can work for us?
Click to expand...
Click to collapse
@dhinesh77 bro link to sd any news?????
Rooted but Cannot enter Recovery mode
Hi
I rooted my a 58 using FramRoot, installed gravity toolbox also.
However i try, Iam not able to get into recovery.
#Tried flashing using Mobile Uncle, it flashes and asks to reboot to recovery.But again boots into normal os.
On powering on with vol+ and power button it shows only new Bolt logo(white letters in green trapezium) and no android
I tried rebooting into recover with different tools but all same result.
# Tried running the CTRv2.1-ubifs.exe a no of times.
It detects my MT6572 SoC and asks for root rights on phone, but fails after issueing dd commands with the following message on pc screen "Error detected, cannot unpack recovery.img"
I had around 90mb free space in data partition.
#
This is what I could observe, if iam trying to get into recovery it shows bolt logo as said above, then black screen and again comes to bolt logo and continues a normal boot.
Tried vol- and power button. Took me to some chinese factory testing menu.I could test my device hardware and also could do a factory reset from that menu.But not idea how to get into recovery from there.
I have all the drivers installed and I am not a newbiew, has flashed a lot of recoveries and custom roms on diff devices.
I followed @dhinesh77 thread and the cat /proc/mtd command screenshot is attached.
I have no idea what iam missing here, If you need any details i can provide the same.Please help me
abi.z said:
Hi
I rooted my a 58 using FramRoot, installed gravity toolbox also.
However i try, Iam not able to get into recovery.
#Tried flashing using Mobile Uncle, it flashes and asks to reboot to recovery.But again boots into normal os.
On powering on with vol+ and power button it shows only new Bolt logo(white letters in green trapezium) and no android
I tried rebooting into recover with different tools but all same result.
# Tried running the CTRv2.1-ubifs.exe a no of times.
It detects my MT6572 SoC and asks for root rights on phone, but fails after issueing dd commands with the following message on pc screen "Error detected, cannot unpack recovery.img"
I had around 90mb free space in data partition.
#
This is what I could observe, if iam trying to get into recovery it shows bolt logo as said above, then black screen and again comes to bolt logo and continues a normal boot.
Tried vol- and power button. Took me to some chinese factory testing menu.I could test my device hardware and also could do a factory reset from that menu.But not idea how to get into recovery from there.
I have all the drivers installed and I am not a newbiew, has flashed a lot of recoveries and custom roms on diff devices.
I followed @dhinesh77 thread and the cat /proc/mtd command screenshot is attached.
I have no idea what iam missing here, If you need any details i can provide the same.Please help me
Click to expand...
Click to collapse
I have even tried dd ing the recovery image provided to the recovery partition manually.write was successfull. But no hope.I doesnt come to recovery menu.VolUp+power comes to bolt logo ans then restarts and continue normal boot
Need your help !
abi.z said:
I have even tried dd ing the recovery image provided to the recovery partition manually.write was successfull. But no hope.I doesnt come to recovery menu.VolUp+power comes to bolt logo ans then restarts and continue normal boot
Need your help !
Click to expand...
Click to collapse
thanks guys it seemes uploaded is corrupted i will check this weekend , meanwhile try ctr recovery its expected to work 100%
---------- Post added at 06:31 AM ---------- Previous post was at 06:30 AM ----------
abi.z said:
I have even tried dd ing the recovery image provided to the recovery partition manually.write was successfull. But no hope.I doesnt come to recovery menu.VolUp+power comes to bolt logo ans then restarts and continue normal boot
Need your help !
Click to expand...
Click to collapse
alanvmathew said:
@dhinesh77 bro link to sd any news?????
Click to expand...
Click to collapse
Sry bro i dont have enugh space to make ext parttion on sdcard , so i cant able to check
@dhinesh77
Thnx dude..I was wondering wats wrong with my phone s recovery mode..
As mentioned in my prev post that ctr auto porting tool fails in last step too.tried on winxp.
Waiting for or next upload bro.thanks for your works
BTW will try ctr again toninght
Sent from my Micromax A58 using xda app-developers app
abi.z said:
Hi
I rooted my a 58 using FramRoot, installed gravity toolbox also.
However i try, Iam not able to get into recovery.
#Tried flashing using Mobile Uncle, it flashes and asks to reboot to recovery.But again boots into normal os.
On powering on with vol+ and power button it shows only new Bolt logo(white letters in green trapezium) and no android
I tried rebooting into recover with different tools but all same result.
# Tried running the CTRv2.1-ubifs.exe a no of times.
It detects my MT6572 SoC and asks for root rights on phone, but fails after issueing dd commands with the following message on pc screen "Error detected, cannot unpack recovery.img"
I had around 90mb free space in data partition.
#
This is what I could observe, if iam trying to get into recovery it shows bolt logo as said above, then black screen and again comes to bolt logo and continues a normal boot.
Tried vol- and power button. Took me to some chinese factory testing menu.I could test my device hardware and also could do a factory reset from that menu.But not idea how to get into recovery from there.
I have all the drivers installed and I am not a newbiew, has flashed a lot of recoveries and custom roms on diff devices.
I followed @dhinesh77 thread and the cat /proc/mtd command screenshot is attached.
I have no idea what iam missing here, If you need any details i can provide the same.Please help me
Click to expand...
Click to collapse
Did u install busy box in phone before proceeding. Try installing busy box. Then in ctr try manual porting option and use the stock recovery.IMG. if u did not take back up of stock.IMG I can share it with u. It will work I too had this problem... If u have any doubt ask me.
i am gonna share two roms with you u can use it.
T-09 version rom
http://www.adrive.com/public/RYVRp2.html
T-07 version rom
http://www.4shared.com/zip/wB64yz-vce/A58_T07_2_.html
extract the correct version of rom for your phone and use the recovery.img . you can see the version in about phone option or by removing the battery.
alanvmathew said:
Did u install busy box in phone before proceeding. Try installing busy box. Then in ctr try manual porting option and use the stock recovery.IMG. if u did not take back up of stock.IMG I can share it with u. It will work I too had this problem... If u have any doubt ask me.
i am gonna share two roms with you u can use it.
T-09 version rom
http://www.adrive.com/public/RYVRp2.html
T-07 version rom
http://www.4shared.com/zip/wB64yz-vce/A58_T07_2_.html
extract the correct version of rom for your phone and use the recovery.img . you can see the version in about phone option or by removing the battery.
Click to expand...
Click to collapse
Thanks dude.
@dinesh77 s post helped me to conclude the issue.
Your post led me back on track and thanks for uploading the roms. Although i dint download because of my limited conn speed, itll be of help to someone.
Here's how i solved the issue.
I checked unpacking my existing recovery image and it was corrupted.
I was having a problem since i flashed the corrupted recovery initially, and lateron ctr porting tool was not able extract the existing recovery details for porting.
So i got twrp recovery from your the mediafire link in the first post did a porting and then everything worked fine with ctr recovery.
twrp recovery was running, but backup functionality wasnt working.
Iam not able to use advanced restore from ctr recovery.
All othr functions works from ctr..
---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------
dhinesh77 said:
I didnt used link2sd so far,
We cant change ubifs to ext4 unless got kernel sources
still custom roms are distant dream because of low system partition memory
Click to expand...
Click to collapse
@alanvmathew
Good News bro, I have somehow managed to get link2sd working with fat32.Had to do a lot of trial and error with manual mounting and reformating and reformating..
Was after link2sd till 3:00am
In office now. Will try to reproduce the issues and soon come up with the correct solution for link2sd after iam home.
link2sd
abi.z said:
Thanks dude.
@dinesh77 s post helped me to conclude the issue.
Your post led me back on track and thanks for uploading the roms. Although i dint download because of my limited conn speed, itll be of help to someone.
Here's how i solved the issue.
I checked unpacking my existing recovery image and it was corrupted.
I was having a problem since i flashed the corrupted recovery initially, and lateron ctr porting tool was not able extract the existing recovery details for porting.
So i got twrp recovery from your the mediafire link in the first post did a porting and then everything worked fine with ctr recovery.
twrp recovery was running, but backup functionality wasnt working.
Iam not able to use advanced restore from ctr recovery.
All othr functions works from ctr..
---------- Post added at 12:53 PM ---------- Previous post was at 12:46 PM ----------
@alanvmathew
Good News bro, I have somehow managed to get link2sd working with fat32.Had to do a lot of trial and error with manual mounting and reformating and reformating..
Was after link2sd till 3:00am
In office now. Will try to reproduce the issues and soon come up with the correct solution for link2sd after iam home.
Click to expand...
Click to collapse
Congratulation bro! And please share the procedure here so we can also get benefit of it. Thanks in advance.
Increase internal Memory !! Link2sd Working !! [Use Manual mount Script]
Steps
1. Partition your sd card to have an ext4 2nd partition. I used a second primary partition of 512mb (ext3,ext4 fat32 confirmed working)
2. Install Link2sd from playstore.
3. Mount /system read-write and Copy attached install-recovery.sh to /etc/ using any file manager with root access.
4. Using filemanager(root) goto /data and create directory sdext2. or mkdir /data/sdext2 using root terminal
5. Set permissions on the copied file using filemanager(root) as in screenshot or chmod 777 /etc/install-recovery.sh using root terminal.
6. Done!! Reboot your system and check link2sd->Storage info to see the mounted partition details.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Incase you want to test if link2sd will work or not with your current sdcard 2nd partition, issue the commands in terminal
su
mkdir /data/sdext2
mount -t ext4-o rw /dev/block/mmcblk0p2 /data/sdext2
or
mount -t ext4 -o rw /dev/block/vold/179:2 /data/sdext2
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Make the following changes in the mount command in case you are using a different partition/filesystem
Open your install-recovery.sh and
Replace ext4 with ext2/ext3/vfat depending on you second partition.
If using a partition other than 2nd partition, Replace either mmcblk0p2 with mmcblk0p3 OR 179:2 with 179:3 or so on depending on your partition no.
!!eNJOY!!
abi.z said:
@dhinesh77
Thnx dude..I was wondering wats wrong with my phone s recovery mode..
As mentioned in my prev post that ctr auto porting tool fails in last step too.tried on winxp.
Waiting for or next upload bro.thanks for your works
BTW will try ctr again toninght
Sent from my Micromax A58 using xda app-developers app
Click to expand...
Click to collapse
It seems root access was denied for ctr auto port tool, hence why you failed, reinsure that you have running auto port tool under c:/ ; anyhow I will upload ctr compiled recovery too on this weekend sry or delay
dhinesh77 said:
It seems root access was denied for ctr auto port tool, hence why you failed, reinsure that you have running auto port tool under c:/ ; anyhow I will upload ctr compiled recovery too on this weekend sry or delay
Click to expand...
Click to collapse
@dhinesh77 Ya please upload so that others can use it.. If you want i can upload ported ctr recovery.
It was not root access causing problems,I had flahed the corrupted download to phone initially and then the recovery.img which ctr was reading from my phone was corrupted for autoporting tool to work on, and was failing while extracting the .img..
1 week old Bolt A58 with Root+Gravity+CTR+Link2sd
Everything is fixed now, and i will be gifting it to my father this weekend.
Thanks for help everyone
abi.z said:
Steps
1. Partition your sd card to have an ext4 2nd partition. I used a second primary partition of 512mb (ext3,ext4 fat32 confirmed working)
2. Install Link2sd from playstore.
3. Mount /system read-write and Copy attached install-recovery.sh to /etc/ using any file manager with root access.
4. Using filemanager(root) goto /data and create directory sdext2. or mkdir /data/sdext2 using root terminal
5. Set permissions on the copied file using filemanager(root) as in screenshot or chmod 777 /etc/install-recovery.sh using root terminal.
6. Done!! Reboot your system and check link2sd->Storage info to see the mounted partition details.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Incase you want to test if link2sd will work or not with your current sdcard 2nd partition, issue the commands in terminal
su
mkdir /data/sdext2
mount -t ext4-o rw /dev/block/mmcblk0p2 /data/sdext2
or
mount -t ext4 -o rw /dev/block/vold/179:2 /data/sdext2
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Make the following changes in the mount command in case you are using a different partition/filesystem
Open your install-recovery.sh and
Replace ext4 with ext2/ext3/vfat depending on you second partition.
If using a partition other than 2nd partition, Replace either mmcblk0p2 with mmcblk0p3 OR 179:2 with 179:3 or so on depending on your partition no.
!!eNJOY!!
Click to expand...
Click to collapse
WORKED.......!!!!!!! :laugh::laugh::laugh:
abi.z said:
@dhinesh77 Ya please upload so that others can use it.. If you want i can upload ported ctr recovery.
It was not root access causing problems,I had flahed the corrupted download to phone initially and then the recovery.img which ctr was reading from my phone was corrupted for autoporting tool to work on, and was failing while extracting the .img..
1 week old Bolt A58 with Root+Gravity+CTR+Link2sd
Everything is fixed now, and i will be gifting it to my father this weekend.
Thanks for help everyone
Click to expand...
Click to collapse
Mr.Carliv has updated his recovery version to 2.2 , ported just now and updated in main post , all bugs fixed in ctr recovery too :good: