Dropped-> Cracked Screen-> No response to touch - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I am presuming I'm hosed, and replacing the glass will not get me going, given that not only is the screen cracked, but no response to touch.
Is that the case?

ewingr said:
I am presuming I'm hosed, and replacing the glass will not get me going, given that not only is the screen cracked, but no response to touch.
Is that the case?
Click to expand...
Click to collapse
The glass covering the LCD is the digitizer. If it doesn't respond to touch, the digitizer or the internal digitizer connection to the mobo could be damaged.
Can you see any images? If not, you would need to replace the LCD as well.
Replacing the LCD and digitzer is not guaranteed to get the phone going because there could be internal damage.

ewingr said:
I am presuming I'm hosed, and replacing the glass will not get me going, given that not only is the screen cracked, but no response to touch.
Is that the case?
Click to expand...
Click to collapse
The display unit has three layers bonded together. The LCD, a digitizer and the exterior glass. If you can see a normal picture, but there is no response to touch it sounds like your digitizer is broken as well as the exterior glass. just replacing the exterior glass will not fix the touch problem. You're probably looking at about $100 in labour either way, plus parts. The glass is cheap, $5 or $10 on Ebay or Amazon. But the digitizer is another $50 - $150, so it may be cost prohibitive to repair your phone unless you are doing the repair yourself.
If you are really lucky, it could just be a loose connection, but I'll bet that your digitizer needs to be replaced. Another possible option worth exploring is to phone Samsung and ask if they have a flat rate for out of warranty repairs. They do in some areas and that may turn out to be your best option. If you end up doing that, note that you'll actually get a replacement i.e. refurbished phone, not your original phone returned to you after being repaired.
.

Thanks. I suspect you are right. I'm going to go the insurance route then.

Related

[Q] Broken Screen

I recently replaced just the broken glass screen on my evo. When I turned it on now, the screen is all black now. I hear it still working, I hear SMS and phone calls, but cant see anything. I didnt replace the entire LCD just the clear part. When I was prying the clear screen off, it was sticking to the lcd, which also was cracked. So I got the screen off but the other part came with it. I dont know if it was connected to the LCD and it was broken off or if its ok seperated. Its just the dark looks like tinted glass that goes directly over the LCD and under the clear screen (digitizer). So, can anyone tell me if maybe I damaged the LCD screen.
Thanks in advance.
So before replacing the glass/digitizer, the lcd still worked fine? Based on your description it sounds like the lcd. You may just have a loose ribbon connection...have you tried redoing the ribbons?
I'm about to dive into the same mission. Thinking twice about it now.....
Yes the glass was broken for about 1 month but it still worked fine the LCD was working. I've tried reconnecting the ribbons various times also tried connecting the old glass digitizer, but still the same result. I'm not sure if that tinted screen was part of the LCD and is now broken or if I somehow damaged something else when I was connecting it.
rugedraw said:
I'm about to dive into the same mission. Thinking twice about it now.....
Click to expand...
Click to collapse
to tell the truth changing just the glass is definitely the cheapest route, but from what I've read is more difficult than buying the whole replacement LCD. I paid $25 on eBay but the whole LCD is closer to like $75.
Michael61182 said:
to tell the truth changing just the glass is definitely the cheapest route, but from what I've read is more difficult than buying the whole replacement LCD. I paid $25 on eBay but the whole LCD is closer to like $75.
Click to expand...
Click to collapse
So you mean it is easier to purchase a digitizer and LCD that still connected as one piece (http://www.globaldirectparts.com/Sprint-HTC-Evo-4G-LCD-p/htc736815.htm) as opposed to doing the digitizer or LCD individually? If I went that route I would just pay a 3rd party cell phone repair shop to do the work for 100 bucks...then you can hold someone else accountable.
I found the LCD here for cheap: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250782149841&ssPageName=STRK:MEWNX:IT
Supposed to arrive tomorrow so I will find out if the lcd is indeed the problem
thanks for that link, I may have to try that.

what to do with phone now?

Hey guys I dropped my phone pretty hard yesterday, it doesnt appear that the outter glass cracked, but the screen stays completly black now, but if you look at it right you can see cracks that appear to be under the outter glass. I have seen the digitizer kits to fix lcd screens for about $150 so if i bought one of those would that fix my issue? im asking cause most the time i see that it fixes cracked lcds and like i said mine isnt cracked on the outter glass its cracked inside and the screen stays black, but i know its on because the bottom buttons light up and i get sound and vibration just fine. so would lcd digitizer replacement fix this?
If you have insurance, I'd utilize that.
Sent from Pluto.
Speedin07si said:
If you have insurance, I'd utilize that.
Sent from Pluto.
Click to expand...
Click to collapse
I'm sure all phone insurances with sprint don't cover severe physical damaged caused by you..
If you have the insurance, replacing the entire device would cost $150 and save you the time and trouble of fixing it. By far the easiest option if you have it.
If not, it depends on your level of expertise with electronic repair. The LED screen and digitizer (touchscreen) are glued together on this phone, meaning you wuld have to have a good deal of patience and skill with a heat gun in order to pull the two apart. Your best bet might be searching for a digitizer and LED screen in one piece. I've seen them for $260-270 on eBay.
I'm a Sprint technician, so feel free to ask any other questions and I'll help if I can. Sorry about your luck with the phone, bud!

Replacing screen?

Just had someone bring me a Galaxy Note 2 to repair and they bought the replacement part off ebay. However all they have got is just a front piece of glass with no digitizer attached, is this correct? Normally im used to front screens having the digitizer attached or is it easy to detach from the broken old screen
Is there a guide anywhere for this?
There's a few threads on this around, but as far as I know, you need to use a heat gun to remove the glue on the digitizer.
Sent from my GT-N7100 using Tapatalk 2
Neo1607 said:
Just had someone bring me a Galaxy Note 2 to repair and they bought the replacement part off ebay. However all they have got is just a front piece of glass with no digitizer attached, is this correct? Normally im used to front screens having the digitizer attached or is it easy to detach from the broken old screen
Is there a guide anywhere for this?
Click to expand...
Click to collapse
no way mate. don't bother to anything with that cheapo. glass is always attached to the digitizer. they bought the cheapest thing they found.
i have found over the years that saving some money is not the best choice in comparison to user experience or other arising problems.
http://parts4mobiles.com/acatalog/S...-Lcd-Screen-with-Digitizer-GH97-14112A-1.html
this is cheaper than ebay which they ask for 166 pounds
Yeah, heat gun will melt the adhesive enough to separate the lcd. But its a very, very difficult process that will more likely than not end up with a damaged lcd or poor reseal.
Sent from my GT-N7100 using Tapatalk 2
mariosraptor is right. Glass is always sold with digitizer (it is one item). I haven't heard about clean glass without capacitive layer. You can buy either digitizer glass or complete digitizer glass with factory glued LCD module. This one's more expensive, but you have less work with replacing.
Anyway: buying only digitizer glass for this kind of phones (Note 2, S3, iPhone 4<, newer HTCs...) is waste of time and nerves. It is nearly impossible to separate LCD from digitizer. Buying complete set of digitizer & LCD is the best what you can do for your phone.
Yeah i didn't think the glass came seperate from the digitizer, i have repaired over 400 iphones and have done about 20 galaxy s2 and s3's and never have i seen just the piece of glass without a digitizer on it, i will tell the woman she needs a whole new screen, i think she did go for the cheapest option
This is actually what she ordered:
http://www.ebay.co.uk/itm/New-Gray-...s=63&clkid=5413496726471672632&_qi=RTM1319883
It obviously doesn't have flex, so it is only pure glass. I don't understand, why would any serious seller offer this kind of items.

Messed up screen replacement, is it repairable?

So I dropped my screen a few months back and the glass cracked. It still worked $100 percent and since the glass wasn't shattered it didn't prevent me from using it. It was only annoying me so i decided to order a new glass and replace the glass. During this replacement I completely ****ed the phone up.
From what I understand there are 3 separate pieces, the LCD, the touchscreen digitizer, and the glass itself. I was supposed to pull the glass apart from the digitizer but instead pulled both up leaving only the lcd behind. In the process I completely shattered both glass and digitizer and severed a ribbon cable.
I couldn't link to an imgur album and the images were too large to attach so i put them in a rar file. As you can see in the pictures my new glass is completely transparent and the old broken one has a tint to it, and an extra layer attached. That was how I came to the conclusion it was the digitizer. I have tried to see if I could just replace the digitizer but all the pictures I've seen don't show the cable that I severed. I have no idea what that cable does, only that it was connected to the tinted portion of the glass.
Important to note is that the phone works. I hear it power on and if i get a notification it plays the sound and vibrates no issue. I just can't SEE anything. Does this mean the LCD is broken too? Or will it only power up when it has the digitizer attached? Is this repairable, if so, how? if not, where did I go wrong?
At this moment I am not due for an upgrade til June, and I don't have more than $100 to spend on a replacement so if I can I'd like to fix this one to both save money and not have to downgrade to a lesser phone.
Brooklyn11218 said:
So I dropped my screen a few months back and the glass cracked. It still worked $100 percent and since the glass wasn't shattered it didn't prevent me from using it. It was only annoying me so i decided to order a new glass and replace the glass. During this replacement I completely ****ed the phone up.
From what I understand there are 3 separate pieces, the LCD, the touchscreen digitizer, and the glass itself. I was supposed to pull the glass apart from the digitizer but instead pulled both up leaving only the lcd behind. In the process I completely shattered both glass and digitizer and severed a ribbon cable.
I couldn't link to an imgur album and the images were too large to attach so i put them in a rar file. As you can see in the pictures my new glass is completely transparent and the old broken one has a tint to it, and an extra layer attached. That was how I came to the conclusion it was the digitizer. I have tried to see if I could just replace the digitizer but all the pictures I've seen don't show the cable that I severed. I have no idea what that cable does, only that it was connected to the tinted portion of the glass.
Important to note is that the phone works. I hear it power on and if i get a notification it plays the sound and vibrates no issue. I just can't SEE anything. Does this mean the LCD is broken too? Or will it only power up when it has the digitizer attached? Is this repairable, if so, how? if not, where did I go wrong?
At this moment I am not due for an upgrade til June, and I don't have more than $100 to spend on a replacement so if I can I'd like to fix this one to both save money and not have to downgrade to a lesser phone.
Click to expand...
Click to collapse
You can buy a replacement screen with a digitizer attached but it will cost over $100 and the way your phone is now it may not be worth doing yourself. You can get a pro install for around $200. You may want to wait for your upgrade then.
avruma said:
You can buy a replacement screen with a digitizer attached but it will cost over $100 and the way your phone is now it may not be worth doing yourself. You can get a pro install for around $200. You may want to wait for your upgrade then.
Click to expand...
Click to collapse
Yeah I was hoping there was a cheap fix but I screwed myself. I ended up buying one off eBay that has a bad charging port for $100. I'm just going to swap the mobo and I should be good to go.
Sucks I had to spend the money, it was a gift from my brother for a birthday tattoo, butit's a learning experience. If I ever try to tackle a glass replacement again I know what NOT to do.

Touch broken, worth replacing?

One month a go i have broken my touch but the glass is not broken, i believe this happened when I sat in my car. The phone was in my left front short pants poket, but slipped underneath i believe and that made a bending procedure and broke only the touch.
Is it worth replacing it? and what will be the costs?
If you do the repair yourself then yes it's still worth it. But it may not be easy for someone not used to doing these repairs. Check YouTube for guides. LCDs go for just under £60 in the UK.
If you have to pay a repair shop or use a Samsung service center then maybe not because will probably cost you the same as buying another handset. Maybe.
In service center where I'm working we are changing whole front panel for about 70$ using original Samsung part. Last week we sold used i9195 in perfect condition for about 130$ so as You can see front panel will cost You about half price of used phone. Of course You can buy cheaper phone in worse condition but it still be more than this part. Replacing process is quite simple but to peel off sim card slot is a little tricky so watch some disassembly tutorial first.
Good luck.
When u say whole front panel, u mean touch and gorilla glass. Coz i heard on a forum that the screen after a while become yellow. But i think that was g glass replace.
No, I meant whole front with display cause Samsung S line has digitizer (touch) on display, not like other phones on glass. So if You change only glass Your touch will be broken still. Whole fron is glass, digitizer, display and part of body with silver line around screen.
K thanks for the info!

Categories

Resources