Develop Bugs

[Review] Momax UltraThin Case

Just a quick review of one of the better cases that I have come across...for those who dont like TPU and soft cases were the lip around the screen would easily peel back, and dont feel like actual part of the phone...Seems to be the only option was to run with no case, or them clip on cases.
The Momax UltraThin is the best case for myself at the moment, offering all that I am after, a phone that is still slim, protects it from minor scratches...I admit, not much drop protection but then, even thicker cases dont always promise absolute protection.
Anyways, the case is well lipped, accurate and precise, the holes for the buttons are well placed and shaped, overall very easy, as if there was no case on. The camera hole is well flushed to the camera itself.
Most of all this case actually clips on very tight and firm, just the way I like it...there is no give or any gap or loose points like TPU cases or SGP Neos...its just a firm case, that makes you feel like you are holding onto a phone without any added bulk...
Plus, the paint job on it is absolutely stunning...pretty flawless, high quality product...for a fair price...Ill let the photos do the talking...
Cheers.

Nice and simple case. The price seems cool too, thanks for sharing the product, I'll have a look at it!

Looks very nice. Where did you get it from?

plisk3n said:
Looks very nice. Where did you get it from?
Click to expand...
Click to collapse
I got mine on Ebay, shipping took about 1 week to New Zealand which is as slow as things get...

Also, is the material on the inside part of the case metal? I'm afraid it would scratch the plastic on the back of the phone if there's any rubbing.. ?

plisk3n said:
Also, is the material on the inside part of the case metal? I'm afraid it would scratch the plastic on the back of the phone if there's any rubbing.. ?
Click to expand...
Click to collapse
It is plastic, very smooth so I do not think it would scratch at all unless there is sand or other small hard particles between the case and phone.

What is different from other mesh cases ?

rouvax said:
What is different from other mesh cases ?
Click to expand...
Click to collapse
There are no mesh that allows small dusts to get between case and phone I suppose? I believe it also comes in transparent as well...

Have the same case - price and quality are perfect. I like that comparing to original phone materials this case feels like good-old soft-touch back panel. Only drawback I can find is that this case can be scratched easily - after a month of carrying my phone mainly in the pocket there appeared lots of small scratches. I bet this is due to the material of the case.

is there any problem with voice conversation like other ebay cases ?
No gps problem ?

raver2046 said:
is there any problem with voice conversation like other ebay cases ?
No gps problem ?
Click to expand...
Click to collapse
I havent had any issues with calls or GPS...

Not a fan of cases that expose the top or bottom of the phone so I am still looking while my S2 is in transit.
Thanks.

Case-Mate Tough Case

If anybody is wondering about cases, I bought the case mate tough case from amazon last week, it arrived today. Paid about 25 euro inc. postage to ROI.
Case looks good on the phone, its a silicon inner case with a hard polcarbonate shell. Access to all buttons and connections are good. It seems sturdy enough, but I have yet to drop it (I'll update when I drop the phone, it wont take long ) If it bothers anybody, the case makes a hollow noise when you tap the back of it, it annoys me a little, but I cant imagine I'll be tapping the back of the phone that much anyway
A silicon lip around the screen also helps protect the screen if left/dropped on its face, as well as stopping it slipping while left on a hard smooth sloped surface.
The case is about 2 or 3mm thick I would estimate. Most people dont like thick cases, but on the contrary, I kinda like the added bulk, I have big hands.
The back of the case is textured with ridges, but the hard plastic still feels somewhat slippery or something. Its not in any way difficult to hold, but perhaps not as grippy as a rubberised finish would be. An advantage of the hard shell is that it slips effortlessly in and out of your pocket. The small silicon faces exposed don't gather much lint either, and they lose it really easily anyway when you run your finger along them.
A screen protector and screen wiping cloth are included, I havn't tried either of them yet though so cant comment.
Something that's important to point out about this case and other accessories for the wildfire s - I know its been said before, but the wildfire s comes in 2 different sizes. This case fits the european version of the wildfire s, to the best of my knowledge the otterbox case fits the american version. Just be careful when getting a case, I almost bought the otterbox, whick would have been way too large
Overall, first impression is that this is a good case. If you don't like bulk maybe this case isn't for you, it does add quite a bit to the phone size wise, but I have rather a habit of dropping mine so I don't mind, it can use all the protection it can get.
I'm just putting this brief review up for anybody who wants info on it, I'd be happy to answer any questions if I'm leaving out anything.
Laurence

yes otterbox fits the US ones, I've got it and I love it. they appear near-identical to the case-mate one, so just about everything you say applies the same to that. the only big difference is that otterbox has very light texturing on the plastic part.

Cases

There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.

Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?

The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.

I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.

fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.

Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.

I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.

Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T

http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.

Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.

Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)

And what about silicone cases? Soft ones I mean..

There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?

Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels

Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks

clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am

hard case with soft grip
or you can call it a "grippy" hard case

rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you

just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....

rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.

[Review] Sweet Armor Galaxy S3 Titanium Rainbow

Sweet Armor
Sweet Armor is a Korean company that produces premium metal cases for mobile phones. Currently, it has produces cases for three popular Android phones, the GS2, GS3 and the GNote.
Sweet Armor Galaxy S3 Titanium Rainbow
Packaging
The packing is not bad at all compare to SGP or other companies. As you can see in the pictures, the case protected by four soft foams inside the box, which I think is very thoughtful, as this is a very expensive case, no one would like it to be damaged during the shipping.
Inside the box, there are 8 Philips screws and a little small Philips screwdriver. The build quality of the screwdriver did surprise me a little while. The screwdriver is well built and it is magnet, which can certainly help your installation of the case, the screws are very small.
There is one thing that may be disappointed- there is no manual inside the box. You may say it is easy to figure out how to install the case but I think it would be nicer if there were a manual inside the box along with a USD72 dollars case.
Built Quality
The built quality of this case is 10 out of 10. The case is very solid and the colouring of the case is very well done. It is definitely one of the best cases in the world with no doubt. The edges are smooth and the cuttings are perfect.
On the case, there are two holes on the left side of the case, which allow you to put a string strap. Although I do not use a string strap, I think these two holes are very nice as some people may want to put a string strap onto a phone and most of the cases/ phones nowadays do not provide this.
Also, there are two button covers at the position of the power button and the volume rockers. These not only help to prevent dust getting into the gap between the phone and the case, but also help to make the buttons easier to access. I have no problem in using the power button and the volume rockers when I using this case. The buttons are sensitive and “clicky”.
This case does add some weight to the phone. However, the weight is very small. You can definitely feel the weight but the weight is acceptable. you would not feel the phone too heavy, in my personally opinion.
I have used a lot of cases in the past, from the cheap Ebay cases to SGP expensive cases but there is no cases that can give me the Sweet Armor case can give me. All the cases that I used in the past kept gave me a very “plastic feeling”. When I tried to hold the phone very tight, I felt like I was going to break the phone. But when I am using the Sweet Armor case, it gives me a totally different feeling of the phone. The case is very solid and when I try to hold the phone very tight, I do not feel any “plastic feeling”. The case gives an extra strength to the phone to against the force from the outside, and this makes me feel the phone more “solid” and steadier when I am holding it.
Although this is a metal bumper, it provides a little lift at the back of the phone, which prevents the back of the phone from scratching. So it does not have the common problem that most of the bumpers in the market have.
For your information, during the time I use this case, there is no reception/NFC problem for me.
However, there are some problems about the case, too. The headphone and the micro USB cut outs of the case are not big enough, so if you are using an expensive pair of earphone like the Westone 4R, TF10 pro, or other head phones, you may need to find a extend 3.5mm cable; if you are using a dock such as the Samsung OEM dock, or the Zen dock, you cannot use the docks when you are using the case unless you uninstall the case. Sweet Armor might needs to make a bigger cut out for these two ports in the next edition of the cases.
Talking about the installation of the case, it is very simple. The case only requires one screw at every corner of the phone (total: 4 screws). However, when you try the swap the SIM card or battery of the phone, you will find the case does not come handy. There is no way for you to do any of the things that I talked above if you forget to bring the screwdriver with you. Therefore, if you are a person who usually swaps your SIM card or change battery, this case may not suit you.
There is one more issue about the case, for the people with small hands, like me. The case will makes the phone wider and taller, so it will make it harder to use the phone with one hand.
Conclusion
Overall, considering the price of this case, I would not say the built quality surprises me, as this is what a $72 case has to have. The case is very solid, very beautiful and stylish, and very thin. It can certainly handle a few drops from a certain height but you cannot expect it can protect your phone from 2 meters height. For normal daily usage, I think this case does its job. And if you are looking for a luxury metal bumper, I think this is one of the cases in the market you should consider.

Wow it's a So beauty
Where to got?

pius kim said:
Where to got?
Click to expand...
Click to collapse
U can get one from the official sweet armor website. http://www.thesweetarmor.com/en/15-galaxy-s3
The gold and titanium ones look more beautiful

Thank you for your Review
Thank you for your Review!!l.:victory:
We have all Sweet amor Bumper 20% off come to website

Will these fit with an extended battery? They look like there's enough room on the back bezel for the extended cover to fit.

Too expensive for a BUMPER, I can't stand bumpers who are twice as expensive as some of the higher end cases with half the protection.
Sent from my SPH-L710 using xda app-developers app

A couple of cases - cheap can also be good... :)

Just wanted to do a review of some cases I bought and tried recently for my LGOG, hoping the info would be useful to other people. There are some other good and cheap options available online, but these are the ones I tried first-hand. I am really happy with all three of them, so here's the proof that sometimes you get more than you pay for...
First, a generic sleeve picked up at a local dollar store while I was waiting for my Amazon order to arrive. For just $2, it's pretty much as good as free. Simple, but ingenious: two pieces of synthetic leather (it's high quality, smooth, soft, and doesn't stink) stitched together, but with an added pullout ribbon that is surprisingly convenient, and works wonderfully to get the phone out. My wife was quite amused by the way it worked (as was I ). Sized perfectly for my phone, and looks pretty nice and elegant, too. Excellent basic protection sleeve, considering the price. Highly recommended, if you prefer your phone naked, but still want reasonable protection carrying it around. Five stars from me!
Next comes the Diztronic case, ordered from Amazon. It's a low-profile TPU wrap-around skin that looks and works much better than it costs. Very nice soft touch finish, clean design with precise cutouts, sharp looks and enough protection for daily use. The fit is perfect, feels like this phone was born in it. Some people on Amazon complain that it peels the screen protector at the edges due to a tight fit, but I don't use screen protectors, so I don't care. Adds very little bulk, but gives a nice protection around the bezel, so you can safely lay your phone face down. It also levels the protruding camera lens cover on the back, so it doesn't get scratched easily. One thing that seems weird at first is that the design around the volume and power buttons is very different. But then I realized how much it actually helps -- the power is recessed deeply in the cutout, making it much less prone to accidental presses, while still easily reachable with a fingertip. Very convenient. It would be nice to have a better grip on the sides (like a diamond pattern or something), but even as is, this case still makes the phone much less slippery than naked. And I didn't like the prominent logo on the back, as I prefer all my things with as little branding as possible (ideally, none, but that's just wishful thinking). Four stars (minus one for the grip and the logo).
The last one is a cheap dual-layer case pretending to be an OtterBox, also from Amazon. I saw this case there under different brands; mine was Aimo. I used OtterBox cases in the past, and to be honest, this one is quite impressive in comparison. Pretty much the same design features (except the port covers), build quality and the level of protection as Commuter series, but for just a small fraction of a price. And it has a handy folding stand on the back, which works in both portrait and landscape. If you are reeeally nitpicky, you might find the fit between the inner silicone layer and the outer hard shell a tiny bit loose along the top and bottom edges, but hey, it's not exactly an OtterBox, OK? Again, you really have to look hard and close to notice this. All the cutouts are precise, and the buttons are nice and light to the touch. Note that this case is quite bulky, and doesn't match the design style of the phone itself, so some people may not like it for its aesthetics. But as far as protection goes, this is probably the best option for this kind of money. This case is available in different colour combinations. Nothing beats black for me, but you can get yours in neon pink, if you want. Five stars, hands down!

Thanks for these suggestions and pics.
My first case for OG was Nilkins hard plastic case - at first it may look good, but actually is a piece of you know what. The rubber layer on the case started to peel off after 2 weeks first on the corners then the rest, due to this the phone looked ugly. After a while corners just broke off completely. All this happened with regular use without any extremes.
The next one I bought was a bit cheaper also from China - TPU X Type soft silicon I guess. I've been using it for many months now and it havent changed a bit. Good protection, looks nice and I guess it wont change forever unless you cut it with scissors
So yes, cheap can be good, but buyer beware as some cheap cases will be a headache.

I have this one:
aliexpress: /item/Genuine-Brand-New-IMAK-Crystal-series-PC-Ultra-thin-Hard-Skin-Case-Cover-Back-For-LG/1027800082.html
Phone looks nice in it. The plastic is sturdy, but it scratches easily. However it's a cheap one so no risk in trying it.
And the classic one gel case:
aliexpress: /item/Hot-Sale-8Colors-S-Curve-Line-Shape-High-Quality-Soft-TPU-Rubber-Wave-Gel-Soft-Skin/1310173671.html[/url]
This offers complete protection, but it's ugly.
PS: Just copy rest of URL after aliexpress.com to see it. I'm not allowed to post links.

First case I got was this: http://www.ebay.com.au/itm/QuickSan...lePhoneAccessories&hash=item3f25597db6&_uhb=1
It still works great to this day, but peeled the screen protector off.
I have had many E975 cases, flip ones, rubber and hard ones.
Currently I am using the LgOg official bumper and it is a dream, sometimes the holes are tight but I simply file them and they work fine
The bumper: http://www.ebay.com.au/itm/181246366449?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649