Develop Bugs

[HELP] Boot loop problems

First off sorry if this is answered in another post, lease kindly direct me to the post if it is =)
I just tried to install a second ROM from ROM Manager. I was running DCU and created a back-up in ClockworkMod before I started then installed the new Fresh ROM successfully. When I tried to go back to my first ROM via the restore point I set up it gets stuck in a boot loop. The 2nd restore point from the Fresh ROM loads up just fine.
Is there anyway to fix the older restore point and get back to DCU or should I just wipe everything and reinstall DCU...
Thanks in advanced!

do a data wipe, clear cache and dalvick
Then restore your backup. Clockwork does not seem to like certain roms.

Bielinsk said:
do a data wipe, clear cache and dalvick
Then restore your backup. Clockwork does not seem to like certain roms.
Click to expand...
Click to collapse
thanks, i was able to wipe everything from the original android recovery mode and upload an old nandroid back up but from Clockwork it didnt seem to clear the dalvik cache, when i clicked clear it just went back to the last menu it never said anything in the log and when i loaded up the Clockwork backup it still didnt work :/

CM7 final bootloop

So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?

i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App

KNguyen104 said:
i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Using the RomManager interface I chose to Wipe Data and Cache and also chose the gapps package to install. I guess I could try it again but I was mystified why it didnt work since I "thought" it was so simple.

If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed

snowboarda42 said:
If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed
Click to expand...
Click to collapse
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?

Alpine- said:
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?
Click to expand...
Click to collapse
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk

Alpine- said:
So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?
Click to expand...
Click to collapse
I had the same issue....although mine have been caused by restoring system data.
What I did is manually DL the rom, boot into recover, wiped cache/dalvic, flashed from zip (Both CM7 and the proper GAPPS file) and it worked.

eventer289 said:
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.

Alpine- said:
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.
Click to expand...
Click to collapse
So wait, still getting the loops?

teh roxxorz said:
So wait, still getting the loops?
Click to expand...
Click to collapse
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.

Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.
What I started doing was booting into RECOVERY (i know it sounds scary but it really isn't) A little off topic but there is a great app that I think every rooted user should use, it's called: Reboot Control Widget It only costs a measly $1 in the Market but it's well worth it. Basically you put the widget on the desktop and click on it. You are then given the option to Reboot your phone, Hot Boot (fast reboot), boot into Recovery, Bootloader or Shut Down. Best dollar you will ever spend on an app.
So anyway, l strayed from my point. The problem you are experiencing is partially due to not having fully wiped your phones data/cache. I know you think you did it through the Clockwork app but from experience it doesn't work that well. There is a "flashable" file called Calkulin's Format All. It is in the DEV section posted in Calkulin's Rom section. It will clear everything except the contents of your SD card.
1. Boot into RECOVERY
2. find: INSTALL ZIP FROM SDCARD
3. select the Calkulin's Format ALL.zip file (your phone will be totally clean after this)
4. Again, choose INSTALL ZIP FROM SDCARD
5. Select the ROM you want to flash. (If it is a Cyanogen based ROM you will have to flash the appropriate Google Apps file after flashing the ROM. If flashing a Sense ROM the Gapps file is not necessary)
6. Flash Gapps file (Google apps if necessary)
7. Once this is done select REBOOT SYSTEM NOW
I feel confident that if you follow those steps you won't run into any bootloops!

I have added the Format All.zip file that I mentioned in my last post.
Little advice:
- take the time to do a Nandroid before flashing a new rom
- use Titanium to restore only the apps w/o the data. I know it's nice to restore everything the way you had it on the last rom but from my experience this has led to instability in the new rom. Also from my experience when you are on a SENSE rom and use Titanium to backup your files and data when you install a AOSP (like CM) rom and try to restore those files and data it won't even let you. Just something to keep in mind if you are switching between CM to Sense or vice versa.

Alpine- said:
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.
Click to expand...
Click to collapse
Yes it should.
Manually wipe you factory/data, cache, dalvik, then flash the rom with the latest gapps and you'll be good.

SantinoInc said:
Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.....
Click to expand...
Click to collapse
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?

when you use clockwordmod recovery to wipe your phone the dalvik doesn't wipe with the wipe option you see on the main screen, i belive you will see the option to wipe it in the advanced menu

Alpine- said:
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?
Click to expand...
Click to collapse
They are the same. ROM Manager boots you into recovery and nandroids for you. People have mixed experiences with ROM Manager. From my experience it is best just to boot manually into recovery and take care of all your flashing and wiping there.
Sent from my PC36100 using Tapatalk

How to downgrade from CM10 to CM9?

Hi!
I installed CM10, but I don't like it yet.
How do I go back to CM9? Just flashing the older ROM again doesn't work (it was stuck in a boot animation loop), although I didn't wipe.
Please help.
:fingers-crossed:

Prysewhert said:
Hi!
I installed CM10, but I don't like it yet.
How do I go back to CM9? Just flashing the older ROM again doesn't work (it was stuck in a boot animation loop), although I didn't wipe.
Please help.
:fingers-crossed:
Click to expand...
Click to collapse
Well, back up, then wipe
Sent from my jelly bean

iok1 said:
Well, back up, then wipe
Sent from my jelly bean
Click to expand...
Click to collapse
Are you sure that's gonna work? I don't wanna wipe for nothing.
/Oh with backup you mean the things I would wipe? or some thing in CWM?
i am not entirely stupid, but i am kinda new to this.

Prysewhert said:
Are you sure that's gonna work? I don't wanna wipe for nothing.
/Oh with backup you mean the things I would wipe? or some thing in CWM?
i am not entirely stupid, but i am kinda new to this.
Click to expand...
Click to collapse
I mean with titanium, go backup, app2zip etc...... anything that can backup your apps and data
Sent from my jelly bean

Make a backup of you apps with Titanium Backup (not the system apps!), reboot in recovery, make a backup if you want, wipe data/factory reset and wipe cache, install rom, wipe data/factory reset and wipe cache again. Then it should work.

LordJeremy said:
Make a backup of you apps with Titanium Backup (not the system apps!), reboot in recovery, make a backup if you want, wipe data/factory reset and wipe cache, install rom, wipe data/factory reset and wipe cache again. Then it should work.
Click to expand...
Click to collapse
thank you, that did it.
:victory:

Aroma Installer Keeps Freezing

This is getting quite annoying. I am currently on Omega rom but when I attempt to install another rom I can never install it. Aroma installer keeps freezing after 1 or 2 choices. It's driving me crazy. Any other have this problem?

which rom do you have currently ?
maybe try hashing the rom to check if it isn't corrupt.
at what point does it hang?

UtkarshGupta said:
which rom do you have currently ?
maybe try hashing the rom to check if it isn't corrupt.
at what point does it hang?
Click to expand...
Click to collapse
I'm currently on Omega rom.. But I'm having the same issue with attempting a reinstall with Omega as well. I tap "next" a time or two through options such as whether or not I want to back up my EFS folder and what kernel I want, etc. After 1 or 2 choices.. It freezes.. Everytime!

Read everything before doing anything
Step1-as i said first of all try hashing the file. if it's correct then try next step.
Step2-do a nandroid backup before this.
then try doing factory reset, then clear cache, then clear dalvik cache, then clear system partition.
this will delete alllll the data on your phone a-z.
do NOT clear sdcard or you will be romless.
if the problem still persists then try next step.
Step3-
maybe copy rom to external sdcard after formatting it.
then formatting scard and then trying.
make sure to have a nand and efs backup and odin flashable stock rom before doing all this

Which recovery do you have? :highfive:

UtkarshGupta said:
Read everything before doing anything
Step1-as i said first of all try hashing the file. if it's correct then try next step.
Step2-do a nandroid backup before this.
then try doing factory reset, then clear cache, then clear dalvik cache, then clear system partition.
this will delete alllll the data on your phone a-z.
do NOT clear sdcard or you will be romless.
if the problem still persists then try next step.
Step3-
maybe copy rom to external sdcard after formatting it.
then formatting scard and then trying.
make sure to have a nand and efs backup and odin flashable stock rom before doing all this
Click to expand...
Click to collapse
I've done all of these steps just before posting and no luck. Appreciate the attempt though...
SMNE said:
Which recovery do you have? :highfive:
Click to expand...
Click to collapse
CWM 6.0.1.9

Bootloop SGH-1747

I need to get Data from my Samsung Galaxy S3 SGH-1747 and it won't boot past the Samsung Logo.
Someone told me to...
"Get TWRP image for your S3 model, flash image using Odin, boot into TWRP recovery, mount storage to PC and recover data."
I'm very new and sorry lol. Could someone help me with the steps necessary? I have no idea what TWRP is. My phone is not rooted. Is there a guide with photos or a video? What do I need to download for Odin? How do I flash?
My phone is in the most recent Android for it.

TWRP thread is here: https://forum.xda-developers.com/showthread.php?t=1793224

audit13 said:
TWRP thread is here: https://forum.xda-developers.com/showthread.php?t=1793224
Click to expand...
Click to collapse
I went to the post and it said I need to download to my phone from play store.
How?
My phone is not rooted and is stuck in Bootloop.
Please and thank you if you could help.

Before you do anything, try to figure out if you can boot your phone into these 2 mode:
Download mode - With the device powered off, hold Home + Volume Down + Power
Recovery mode - With the device powered off, hold Home + Volume Up + Power. (Take a picture of your recovery mode because it will tell your bootloader version)
If you can't get into those mode, your phone is likely to have a bigger problem.
CanadaChino666 said:
Someone told me to...
"Get TWRP image for your S3 model, flash image using Odin, boot into TWRP recovery, mount storage to PC and recover data."
Click to expand...
Click to collapse
The instruction is for Samsung i9305 but it will work on d2att. To flash TWRP into your phone, you need to follow this instruction. (https://wiki.lineageos.org/devices/i9305/install). Also you need those files:
Heimdall suite - http://glassechidna.com.au/heimdall/#downloads
TWRP image - https://twrp.me/Devices/Samsung
CanadaChino666 said:
What do I need to download for Odin? How do I flash?
Click to expand...
Click to collapse
The only way to flash stock firmware into the phone, is with the software Odin. It's basically starting your phone with a fresh firmware through 'Download Mode' with your phone (With the device powered off, hold Home + Volume Down + Power). It will erase everything.

CanadaChino666 said:
I went to the post and it said I need to download to my phone from play store.
How?
My phone is not rooted and is stuck in Bootloop.
Please and thank you if you could help.
Click to expand...
Click to collapse
There was a link in the thread to the official TWRP website with instructions for using Odin to install TWRP for the d2att which is the SGH-i747: : https://twrp.me/samsung/samsunggalaxys3att.html
Download the tar version of TWRP from here: https://twrp.me/Devices/ I recommend starting with version 2.8.7.0 as a starting point.
Download Odin 3.07 from here: https://www.google.com/url?sa=t&rct...ntid=1168421&usg=AOvVaw0aq_x8M8nbsqDFAFe9tFoy
Download and install the Windows Samsung USB drivers: https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows. I assume you are using a Windows computer.
Make sure the battery is fully charged. Open Odin, do not check anything except f reset time, click on the PDA box and select the TWRP tar file, connect the phone in download mode to the computer with the original Samsung USB cable, flash the TWRP. When you see the word reset, remove the USB cable from the phone, remove the battery, replace the battery, use the button combination to get into recovery. Once in recovery, mount the data partition and copy of the data.
WARNING: flashing a phone always involves risk and you could wind up with a bricked phone and/or loss of data. Proceed cautiously and at your own peril.

Thank You
Thank You So Much!
One love, Much Love ??????

So it worked...
Any ideas how you get the text messages and S3 Notepads out?
I've mounted it on my computer.

If I use TWRP to backup my phone, will it really bootloop if I reinstall the backup?

CanadaChino666 said:
If I use TWRP to backup my phone, will it really bootloop if I reinstall the backup?
Click to expand...
Click to collapse
Yes it will, you need to figure out what's making your system bootloop and resolve it or wipe data and cache.

Omarkoopa said:
Yes it will, you need to figure out what's making your system bootloop and resolve it or wipe data and cache.
Click to expand...
Click to collapse
Any idea how to investigate?
How do I wipe data and cache on TWRP?
Would backing up Data but not system, help restore files like the memos, text messages etc?
Because I could backup the Data and then wipe factory reset and then reinstall the data backup.
How do you factory reset from TWRP?

BlackBeast888 said:
Any idea how to investigate?
How do I wipe data and cache on TWRP?
Would backing up Data but not system, help restore files like the memos, text messages etc?
Because I could backup the Data and then wipe factory reset and then reinstall the data backup.
How do you factory reset from TWRP?
Click to expand...
Click to collapse
The data is what makes the system bootloop in most of the cases and since you're not rooted it is certainly the data what's causing the problem so restoring it would solve nothing.
The option is there on twrp to wipe data and cache.
---------- Post added at 05:41 AM ---------- Previous post was at 05:39 AM ----------
To inevstigate hmmm
You need to remember what you did before the bootloop happened
For example if you installed and app try to remove it and it's data using the twrp file browser.

Omarkoopa said:
The data is what makes the system bootloop in most of the cases and since you're not rooted it is certainly the data what's causing the problem so restoring it would solve nothing.
The option is there on twrp to wipe data and cache.
---------- Post added at 05:41 AM ---------- Previous post was at 05:39 AM ----------
To inevstigate hmmm
You need to remember what you did before the bootloop happened
For example if you installed and app try to remove it and it's data using the twrp file browser.
Click to expand...
Click to collapse
Wiping Data and Cache will erase my files, yes?
I was uploading a file to Google Photos before the crash and loop

BlackBeast888 said:
Wiping Data and Cache will erase my files, yes?
Click to expand...
Click to collapse
Yes. It's like a factory reset.
BlackBeast888 said:
I was uploading a file to Google Photos before the crash and loop
Click to expand...
Click to collapse
I think you can try to remove Google Photos apps via adb and see if it does fix your bootloop issue. Since you have a backup, you can undo your steps. https://forum.xda-developers.com/showthread.php?t=559925.
You can get adb here: https://forum.xda-developers.com/showthread.php?t=2317790

​
CanadaChino666 said:
If I use TWRP to backup my phone, will it really bootloop if I reinstall the backup?
Click to expand...
Click to collapse
Before proceeding, I recommend copying what you can to a computer by mounting the data partition. Then, I would create a complete backup (system and data). Once completed, copy the back to at least one safe place, preferably 2.
Now, try wiping the cache only and reboot. It may be a cache problem that is preventing the phone from fully booting.
Unfortunately, I'm not able to provide instructions to back up text and notes.

audit13 said:
​Before proceeding, I recommend copying what you can to a computer by mounting the data partition. Then, I would create a complete backup (system and data). Once completed, copy the back to at least one safe place, preferably 2.
Now, try wiping the cache only and reboot. It may be a cache problem that is preventing the phone from fully booting.
Unfortunately, I'm not able to provide instructions to back up text and notes.
Click to expand...
Click to collapse
I wiped cache and still nothing.
Is there any other options besides factory reset?
Can the backup bring it back to the way it was or will it make it bootloop again?

I haven't used twrp for a long time but you could try restoring the backup and wipe the cache before booting.
Note that restoring your backup will overwrite what's currently in the phone storage.

audit13 said:
I haven't used twrp for a long time but you could try restoring the backup and wipe the cache before booting.
Note that restoring your backup will overwrite what's currently in the phone storage.
Click to expand...
Click to collapse
Unfortunately I can only backup the current bootloop state lol.
I think there's no other option except factory reset.

nehc_rm said:
Yes. It's like a factory reset.
I think you can try to remove Google Photos apps via adb and see if it does fix your bootloop issue. Since you have a backup, you can undo your steps. https://forum.xda-developers.com/showthread.php?t=559925.
You can get adb here: https://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
is there any other option besides factory reset from here lol?

BlackBeast888 said:
is there any other option besides factory reset from here lol?
Click to expand...
Click to collapse
The only option maybe you have is using adb to uninstall apps one by one and hope it fixes the bootloop. You can try maybe to clear the dalvik cache + cache but I think you have done that.
I have been in this situation before. It's not fun at all. The only way to backup/recover data in a modular way, is with apps like Titanium Backup [root] and Helium. Backup your app + data when the phone is working. When you have a bootloop, do a factory reset and restore the app data incrementally. They are really great apps.

nehc_rm said:
The only option maybe you have is using adb to uninstall apps one by one and hope it fixes the bootloop. You can try maybe to clear the dalvik cache + cache but I think you have done that.
I have been in this situation before. It's not fun at all. The only way to backup/recover data in a modular way, is with apps like Titanium Backup [root] and Helium. Backup your app + data when the phone is working. When you have a bootloop, do a factory reset and restore the app data incrementally. They are really great apps.
Click to expand...
Click to collapse
Can these apps be used while it is in bootloop? Lol