I've been using Franco kernel for a while but it seems like he doesn't give a crap about the new Nexus 7. Any kernels that are actually supported and good?
As long as everything works fine I don't see why a kernel would need to be updated frequently?
I've mostly been using ElementalX 2.6 and have had the best results and support. And importantly, there's not a lot of BS posts.
I attempted elementalx 2.6 amd 2.4 on CM11 however, I was getting very bad lag even with stock settings in elementalx.
I flashes to stock 4.2.2 and tried elementalx 2.6, it now runs great with no issues on stock settings.
I just reinstalled and used oc settings and gc oc settings etc still working well so far.
Also the elementalx kernel works great for otg and broadband usb dongles.
Related
I'm new to kernel flashing. I have been playing around with snap and kings kernel. I don't have a problem flashing snap, but once I have it installed it works fine for awhile, but then it reboots itself or goes into a state where it won't turn on and I have to pull the battery. I tried 7.6 both bfs and cfs and the same thing happens. I also tried 7.5 but once I flashed it nothing showed up in the apps to install.
For kings kernel I flashed it and it booted up fine but it seemed to freeze up and I couldn't unlock my phone after the boot.
Am I doing something wrong when I am flashing these? I am running the nightlies of cyanogen. Also, What are some other kernels that work well with cm?
Thanks!!!
Kernals seem to be a taste for the phone itself and not the rom...
My Evo doesnt seem to like any other kernals than stock I have tried many rom/kernal combos and the only way i get no issues and best battery is to run stock kernal
I ran fresh with netarchy and kings like some others-that had great battery and mine just drained fast so I am done with the kernal swapping for now and jut keep playing with roms.... Trying out Virusrom right now not bad so far
Try wiping the cache and dalvik cache before flashing the new kernels. That might help.
Another thing that might help is posting this in the right section. More people with the knowledge and good insight that you need will be more apt to answer you in the Q&A section.
I've tried clearing everything including data but it still would self reboot
the snap kernels do not work with the recent versions (nightlies) of CM.
The framework has been redone, and you will freeze.
You have to use the stock kernel.
Ziggy just made an AOSP kernel, but its buggy.
Toast has a .35 kernel that works good on the new frame work.
I just was able to use a different kernel of kings. It really doesn't enhance quadrant scores, but im want to see what it does to the battery. Where can I download toast.
Also, I noticed that now my unlock screen is different from my wall paper. Is that a kernel issue?
Check to make sure SetCPU is disabled (or any other overclocking utility), and wipe your cache/dalvik. If all else fails, go with the Snap 7.6 failsafe method.
Kings AOSP #1 has worked best for me using cm nightlies. I have easily doubled my battery life. Has anybody else had success with any other kernels? Is toast an AOSP kernel?
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
DraginMagik said:
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
Click to expand...
Click to collapse
Thanks! this really helped. This may be a dumb question, but where do you find out what kernel runs with the ROMS. eg .35
I really want to find a good combination that gives me good battery life and performance. so will snap 7.6 work with cm 6.1 rc 1 rom?
I saw for CM6.1 the stock kernel is the best. I have gotten the best performance, battery life, and bug free with the stock kernel.
Snap 7.6 would get stuck on the splash screen and required several battery pulls.
Toast .35 works good, but after about an hour or two for some reason it brings my fps cap down to 37, so all my scrolling and games run like ****.
Wait for Snap 9 or the official toast .35 kernel. Stock is just fine.
I was bored last night and tried cm 6.1 with snap 7.6 just for fun, but it seems to be working fine. The boot was quick too, it was on the cyanogen boot image for about 3 seconds before it started up. Quadrant scores are in the mid 2000s. No problems with anything else so far.
Is there a snap website or channel log? I can only fined directories.
Is it necessary to flash a Kernal after flashing a custom rom ?
I am thinking of flashing CM 9 or Liquid Rom. Which is the best kernal to flash with them.
-The correct spelling is kernel.
-It is not necessary to flash a new kernel with a rom. In general roms will package the stock kernel unless they note otherwise.
-I am personally a fan of leankernel because of the mission statement behind its development and the accessibility and speed of its update cycle.
Nope. Custom roms have kernels included, so you are not required to download a separate kernel. However, some kernels run better (ie, more fluid, less heat, reboots, etc) than others on the same device. It all depends on the silicon in your phone. If you plan to run cm9, I recommend sticking with the default kernel. If you're going with Liquid, use imoseyon's leankernel (the default) or franco kernels.
Edit: BTW, I highly recommend franco's kernel app, especially if you are new to the scene. It can download & install either franco or imoseyon kernels, making kernel flashing stupid easy. It also lets you overclock & undervolt, change governors and tweak color settings. And it is the easiest way to keep up with nightly/experimental builds. Not to mention it shows your support and encourages more development.
Sent from my Galaxy Nexus using Tapatalk 2
i say try them all, but for cm9 i recommend fugumod.
Sent from my TF201
Thanks you all for your suggestions ...
finally going to try Liquid Smooth 1.25 (http://forum.xda-developers.com/showthread.php?t=1555667)
along with Franco.Kernel (http://forum.xda-developers.com/showthread.php?t=1367341)
...... One last question Which Franco Kernel to flash there are Milestone 2, Milestone 1, Nightly ??? Whats the difference between them ?
Also when installing extras for liquid smooth do i need to wipe everything again .. I am new to this flashing stuff
and does Liquid Smooth comes with a kernel if so which one ?
Latest milestone is the most stable. Nightlies are experimental. And no need to wipe.
Sent from my Galaxy Nexus using XDA
@cldwar
Liquid + franco is a great choice. Liquid is an extremely polished rom. Very, very smooth with absolutely ZERO lag (it is called Liquid Smooth for a reason) and lots of customization & tweaking options. franco kernel pushes the smoothness to another level. Liquid & franco are both awesome devs who have been tinkering with android for a long time, and they both know their stuff.
Liquid comes with imoseyon's leankernel, which is a solid kernel (obviously, or Liquid wouldn't have included it in the rom). imoseyon is another well-known & respected dev that churns kernels at a dizzying rate. He must develop in his sleep. A lot of people prefer his leankernel, and you really can't go wrong with it. But like I said before, it really depends on your device. Your phone picks the kernel, not you. Milestones are the most stable versions. Nightlies are bleeding edge experimentals with the latest patches & tweaks that may or may not improve battery or performance. Since you are new to flashing, you might want to go with milestone 2 for a few days and see how it feels. On the other hand, you could jump in balls deep and go with the latest nightly/experimental
And you don't need to wipe anything before flashing the extras package.
sublimaze said:
@cldwar
Liquid + franco is a great choice. Liquid is an extremely polished rom. Very, very smooth with absolutely ZERO lag (it is called Liquid Smooth for a reason) and lots of customization & tweaking options. franco kernel pushes the smoothness to another level. Liquid & franco are both awesome devs who have been tinkering with android for a long time, and they both know their stuff.
Liquid comes with imoseyon's leankernel, which is a solid kernel (obviously, or Liquid wouldn't have included it in the rom). imoseyon is another well-known & respected dev that churns kernels at a dizzying rate. He must develop in his sleep. A lot of people prefer his leankernel, and you really can't go wrong with it. But like I said before, it really depends on your device. Your phone picks the kernel, not you. Milestones are the most stable versions. Nightlies are bleeding edge experimentals with the latest patches & tweaks that may or may not improve battery or performance. Since you are new to flashing, you might want to go with milestone 2 for a few days and see how it feels. On the other hand, you could jump in balls deep and go with the latest nightly/experimental
And you don't need to wipe anything before flashing the extras package.
Click to expand...
Click to collapse
thanks .... extremely useful info
Just flashed Liquid with Franco kernel ... Wifi Sucks otherwise cool rom. Is there a way to flash stock 4.0.4 Rom ??
I cant find stock 4.0.4 to flash
cldwar said:
Just flashed Liquid with Franco kernel ... Wifi Sucks otherwise cool rom. Is there a way to flash stock 4.0.4 Rom ??
I cant find stock 4.0.4 to flash
Click to expand...
Click to collapse
If you have fastboot set up, grab official images from google and flash them.
bk201doesntexist said:
If you have fastboot set up, grab official images from google and flash them.
Click to expand...
Click to collapse
those images are for Yakju ..... mine is Yakjujp ... I think i cant flash them .. any other solution ??
cldwar said:
those images are for Yakju ..... mine is Yakjujp ... I think i cant flash them .. any other solution ??
Click to expand...
Click to collapse
doesn't matter,
infact if you flash yakju then you will get OTA as well. if you are in japan you can flash a japan radio on top of the rom.
Rcommander said:
doesn't matter,
infact if you flash yakju then you will get OTA as well. if you are in japan you can flash a japan radio on top of the rom.
Click to expand...
Click to collapse
Don't I need to get the boot loader etc back to orignal in order to receive the updates ... ? If so how ?
Sent from my Galaxy Nexus using XDA
Kernal?
I have been researching the many different kernels out there all day. I have been running GummyNex ROM's since I rooted my GNex. I really do like the options he has. I forget which version, but the battery life was amazing (which included the baked in kernel). I flashed to .0.9 and recently 4.0.4 1.0.1 and the battery life is like a V-12 Lamborghini. I just flashed a Franco Kernal and am hoping this fixes my battery drain issues.
Something has to give......
falconfan said:
I have been researching the many different kernels out there all day. I have been running GummyNex ROM's since I rooted my GNex. I really do like the options he has. I forget which version, but the battery life was amazing (which included the baked in kernel). I flashed to .0.9 and recently 4.0.4 1.0.1 and the battery life is like a V-12 Lamborghini. I just flashed a Franco Kernal and am hoping this fixes my battery drain issues.
Something has to give......
Click to expand...
Click to collapse
Use liquid rom with Franco milestone built ... gave me a 4+ hour screen time. Don't know why but the nightly version reduces battery life
Sent from my Galaxy Nexus using XDA
I'm running Liquid 1.3 and am using Franco nightly #143 and, so far, my battery life is really great. I was at 89% after 2 hours. I also want to try Milestone 3, that just came out yesterday and see how it performs.
Ive been using the dark flo version if cm10.2 since I got my nexus 7, however when ive tried to install a custom kernel, I get a blue/turquoise screen upon reboot. Ive tried both CAF and normal versions of various kernels, but all with the same results. I tried using the AOSP kernel setting in the aroma installer, then installed some AOSP kernels, which do boot but it has the worst lag ive ever seen since my iPhone! Anyone else experienced this and know a solution? Ive searched the forum but couldn't find anything relevant
Same here: installed CM10.2 unofficial, GApps, rebooted and everything´s fine.
After installing any of the Faux-Kernels (es/m/u) and wiping Dalvik etc., I have the same screen problems and lags, which make the device unusable.
I´m searching for an overclock kernel, btw.
Thanks for your input!
im after the same thing, just an oc kernel. I even tried one with no mods, just the cpu speeds increased and had no luck
UPDATE - I read somewhere that some kernels wont work with CM versions released after oct 2nd. I tried installing a copy of dark flo from the end of September, then tried faux123's latest mainline kernel abd it booted fine! Im assuming its an incompatibility with the latest CM, so I hope the kernels get updated soon!
Thank you for the info!:good:
It´s waiting time again...
how did you get out of the turquoise screen?
Easy fix:
Uninstall CM
Install AOSP based rom
Profit
Seriously, CM has gone to crap since they moved away from aosp and started with CAF. Kernel devs shouldn't have to do extra work just for one rom, especially when said rom is going from bad to worse
Nexus 7 LTE
Stock rooted KRT16S
Faux Kernel
Thus far I have used stock rooted and Pro Bam with my N7. The ROMS all work fine with their included kernels. However, whenever I try to use another kernel like glitch of Elemental X I get weird colors while the ROM is booting (Kind of like static). Then the colors are all tweaked when it finishes booting. I have tried overclocking, underclocking, and stock settings. But the issue persists until I reflash the original kernel that came with the ROM.
I am fairly baffled by this one. Any ideas?
Sent from my Nexus 7 using Tapatalk
rastaguy said:
Thus far I have used stock rooted and Pro Bam with my N7. The ROMS all work fine with their included kernels. However, whenever I try to use another kernel like glitch of Elemental X I get weird colors while the ROM is booting (Kind of like static). Then the colors are all tweaked when it finishes booting. I have tried overclocking, underclocking, and stock settings. But the issue persists until I reflash the original kernel that came with the ROM.
I am fairly baffled by this one. Any ideas?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
i dont know if Pro Bam is stock based but check if kernel is CAF or non-CAF if you are on stock install non caf kernel like aosp based in glitch
I'm about to install and try out the 5.0 ROM; but was wondering if it will be a problem to run the AGNi kernel with it? I'm also under the assumption that the AGNi kernel is a bit more efficient than the stock 5.0 kernel, or am I wrong? I want it mostly for the DAC improvements. Thanks.
You should check in the topic for the ROM whether it is compatible with AGNI or not. It depends on the ROM, for example I use cm12 and the AGNI used to work, but it doesn't atm.
If you have AGNI kernel you can change different settings, for example you can overclock your cpu, so the phone should run faster, I don't know about any DAC improvements though.