[Q] Note 3 boot loop after root - T-Mobile Samsung Galaxy Note 3

So I looked into all the stuff for rooting my T-mobile Note 3, checked to make sure that the multi touch bug wasn't there (I think I did it right), red up on the process and watched the video for the CF auto root 3 times before I did it. The root went without a hitch, I was able to install a few root programs (titanium, pimp my rom, Greenify, FullScreen, DriveDroid, Good Mood Droid Gesture Control, Stick Mount, AFWall+, Samba File Sharing, and some others I can't recall off the top of my head).
I was able to make a back up with Titanium, I went into AFWall+ and tweaked all my apps (only white apps in the list) and there was another "security" app I used, but it's name eludes me at this time (it was fairly similar to AFWall+. After that the phone just goes through a incessant boot loop. Starts up (which takes a little bit longer then normal), works for about 60 seconds normally, locks up and restarts. I tried pulling the battery and shutting it down, but it continues to do it.
I'm just wondering what could have caused this, how to fix it and what to do to ensure it doesn't happen again.
Thanks

DictatorZero said:
So I looked into all the stuff for rooting my T-mobile Note 3, checked to make sure that the multi touch bug wasn't there (I think I did it right), red up on the process and watched the video for the CF auto root 3 times before I did it. The root went without a hitch, I was able to install a few root programs (titanium, pimp my rom, Greenify, FullScreen, DriveDroid, Good Mood Droid Gesture Control, Stick Mount, AFWall+, Samba File Sharing, and some others I can't recall off the top of my head).
I was able to make a back up with Titanium, I went into AFWall+ and tweaked all my apps (only white apps in the list) and there was another "security" app I used, but it's name eludes me at this time (it was fairly similar to AFWall+. After that the phone just goes through a incessant boot loop. Starts up (which takes a little bit longer then normal), works for about 60 seconds normally, locks up and restarts. I tried pulling the battery and shutting it down, but it continues to do it.
I'm just wondering what could have caused this, how to fix it and what to do to ensure it doesn't happen again.
Thanks
Click to expand...
Click to collapse
If I were you I would start over again and Odin flash the stock official N900T 4.3 stock rom from
SamMobile.com or any other place which has it available for downloading.
After doing that, use the cf-auto root to root the phone and odin flash twrp or cwm recovery.
Once that's done make a Nandroid backup in recovery so next time when you have these bootloops,
lockups and other issues you can simply restore your rooted Nandroid backup.
All those apps you mentioned with the exception of titanium backup which you used to "TWEAK" your
phone are causing the issues you are having, there is no good reason to even use all those tweaking
apps and most likely are totally un-necessary in the first place.
If your phone works properly after odin flashing official stock firmware and rooting it then the fault
is not in the phone, or the official rom but the fault is in one of those tweaking tools you like to use
either because it's faulty, or you don't know how to use it.

If you can get into advanced settings of your WiFi connection in the 60 seconds before freezing, uncheck "always allow scanning". This had been known to cause boot loops for some people.
If it still loops, try uninstalling all those apps one by one to see which so is causing the issue.
And if that doesn't fix it, I would do as suggested above with the restore.
Sent from any phone that isn't made by Apple.

Maybe you could try something simple first: safe boot. In safe boot the culprit app should not start and if the damage is not in system files, that should give you chance to delete programs one by one and possibly find a culprit, otherwise, if you restore the ROM, you'll never know which one caused the problem. I would assume you wiped cache and if all failed, maybe factory reset?

Related

[Q] New OS update bricked my Fire. Any quick fixes?

My rooted KF got bricked by the new OS update that was released last night. It boots as normal, gets to the locker screen, and whether you unlock it or not, reboots about 15 seconds later to a screen showing the Android guy and an exclamation point in a yellow triangle. Then, if you start touching the screen, 4 buttons will show up on the side, up/down, select, and back... but they do nothing. Reboot again and it takes me to TWRP.
I know how to wipe my KF and reinstall everything, but I was hoping that someone might know of a fix for this. Especially because I just got a new computer and am still in the process of getting my normal apps installed, let alone Android SDKs that I use once in a blue moon. Plus, I have a few games that I would rather not lose my progress on.
BTW, I rooted my dad's KF the exact same way as mine and his just lost root access with the update, everything else is fine. Kinda weird.
TIA
What OS update? Your new computer will not need sdk. Also you will not escape having to wipe if something has gone amuck, unless you get lucky to be able to flash the prior system to revert the defect. You could just flash modaco http://forum.xda-developers.com/showthread.php?t=1439916 no more losing root from OTA`S. You may also get lucky and be able to flash modaco if you`re on rooted stock or previously rooted stock 6.3.1 without wiping.
Thepooch said:
What OS update? Your new computer will not need sdk. Also you will not escape having to wipe if something has gone amuck, unless you get lucky to be able to flash the prior system to revert the defect. You could just flash modaco http://forum.xda-developers.com/showthread.php?t=1439916 no more losing root from OTA`S.
Click to expand...
Click to collapse
About 3am last night, I found my KF bricked after just using it about 30 minutes before (the wifi was on and it was hooked up to the charger). Today, I checked on my dad's KF and he has his wifi turned off. I turned it on and it instantly rebooted to just a "command line" screen saying that it was installing an update. Took about 10 minutes and then rebooted and worked fine, except that it was unrooted. I read somewhere in the Amazon Forums today that they did roll out an update and plan on spending 2 weeks doing it to keep from bogging down their network. Granted, their Software Update page doesn't say anything about it yet.
BTW, thanks for the other info, I'll have to check it out. Sounds like I'll have to wipe it (or at least restore from a 2-3 month old backup and see how the update goes again). But that's cool that I won't need to install the Android SDK.
Explains why some are instantly being unrooted or like in your case bricked strange thing is that it doesn`t change the system version it`s still 6.3.1 figures that Amazon would pull something like this.
Hey, I did manage to find a quick fix!
In the recovery mode, I decided to try using the Fix Permissions option. Still had the same problem.
I then just used the Clear Cache option and my KF was back up and running... and still rooted.
The only issue I have found so far is that I had to change the permission to allow changing the wallpaper, just uncheck the "write" permissions, (which was probably reset by the Fix Permissions option I ran). Other than that 2 second fix, everything is fine.
Granted, I'm waiting for Amazon to do an auto-check for some file that was in the cache that told it that it had installed the latest upgrade, and since I wiped that, it may install it again. If it does, I'll post it in this thread that my quick fix didn't work. But so far so good.
It turns out that my quick fix is only a temp fix.
Twice tonight I had to clear the cache again via the recovery menu. The first time it happened, I had just finished reading and hit the power button to put it in sleep mode, which caused it to instantly reboot and then do the same thing as I mentioned above. It boots up, and within 5 second of getting the locker screen, whether you unlock it or not, it starts shutting down and reboots ending up with the screen in the attached pic (those dots are just dust that appear super bright for some weird reason because you can't see them except in the pic).
So I cleared the cache again, everything was fine, and then about an hour later I found it sitting on that screen again. Clearing the cache fixed it again, but obvious this is a reoccurring problem.
Anyone have any ideas?
I'm reluctant to do a reinstall yet because I'm afraid I'll just end up with the same problem... along with none of my apps installed.
I have the same issue my temp solution is turn off wifi asap after lock-screen appear, wait abt 1-2 minutes then I can turn on wifi and use as normal.
Everything will fine for few hours. Any permanent solution plz? I remember that it occurred after i update something from Amazon app store, maybe : apps...
Sent from my Kindle Fire using xda premium
The permanent solution is to flash another rom preferably modaco if you want the stock experience. Full wipe, your apps can all be redownloaded that is the least of your worries at this point. probably a really good time to upgrade your bootloader and recovery if you haven`t flash both of these zips as zips in twrp if are behind the curve http://forum.xda-developers.com/showpost.php?p=30780737&postcount=180 and http://forum.xda-developers.com/showthread.php?t=1632375 only get them from where I`m directing you or use smirkit http://forum.xda-developers.com/showthread.php?t=1500935.
thanks for your help. This is done with the below solution
1) Copy the update bin file to the /sdcard as update.zip
Download stock ROM : https://s3.amazonaws.com/kindle-fire-updates/update-kindle-6.3.1_D01E_4107920.bin
copy update-kindle-6.3.1_D01E_4107920.bin into Kindle Fire and re-name to update.zip
2) From the main menu of CWM, "Wipe cache from partion" to remove the existing files in the data and cache partitions
3) From the main menu of CWM, press the "Install update.zip" button to flash the stock software onto your device.
no data/application lost accept FFF and CWM
Wiping cache doesn`t remove data in twrp its factory reset that you need to concern yourself with and unfortunately there is data loss. You may have succeeded but others put themselves in a position of needing a factory cable after not properly wiping when flashing stock. This is because the data is what the kindle has a tough time handling after a complete stock flash. Flashing modaco is far safer, truth is that it will leave your recovery and bootloader intact providing a far better safety net if something were to go wrong. Also if you create a backup before you flash if something does go wrong at least you can restore a half crap backup, wipeout recovery and this is no longer possible just saying. I see far more people fail to flash stock than I ever do flashing modaco.
Thanks for the info guys.
Considering the post in the Amazon Forums said this update was being pushed out over a 2 week period, I'm just going to keep my WiFi off (unless needed) and wait until everyone should have received the update and then see how it plays out. Considering it doesn't change the software version number, I'm thinking that this update may be just targeting rooted Fires. And BTW, it appears that the post was removed, because I can't find it again. Maybe they remove any that mention rooting? I just stumbled upon it via a Google search... 99% of the question in their forum are just idiotic.
Directv used to pull this stunt all the time to bust people with hacked cards that allowed them to get all their channels for free (usually a few hours before some big PPV event). They finally completely stopped the ability to hack cards by rolling out parts of their code over a long period of time, a year or so. When the final piece was put in place, the previous parts of their code had already been integrated into the hacked card software, because it appeared safe, and along with upgrading the type of cards they used during that same period of time, pretty much eliminated the ability to cheat Directv. I'm not saying that Amazon is going to those lengths to stop people from rooting their KFs,.. but who knows? It may be costing them too much with people bricking their KFs by trying to root them. Plus, they may also be losing revenue by people getting their free apps (with ads) from the Playstore instead of Amazon. And considering they pretty much sell their Fires for cost, they definitely rely on revenue generated by buying and using things via a stock KF.
BTW, this whole issue had almost perfect timing... I was planning on wiping my KF because it definitely is slower than when I first got it (which was day 1 of its release). I've read that Gingerbread doesn't clean up after itself too well, especially not as good as ICS (kinda like a Windows registry just gets filled with junk over time, and no cleaner beats a fresh install). It also appears that the ICS roms are actually working reliably these days, compared to the last time I checked. So, in a couple weeks, I'll get to have some fun. I am a Windows/Cisco System Engineer, so this kinda stuff is fun for me.
F.Y.I.
It seems that Amazon did do a incremental update on the Original Kindle Fire version
6.3.1_user_4107720, April 30 build to 6.3.1_user_4107920, November 27 build.
I looked thru the update and the only things I found changed are to do with the
Wifi driver, launcher icons, boot animation, and boot.img; attached the changed file below.
I have not tried to update mine, will attempt this weekend.
Thank you Tera Tike for the info at least this confirms that it's not just a fluke users of rooted stock should be warned appreciate your research. I do wonder why they would change boot animation and IMG seems a bit haneous.
Thepooch said:
Thank you Tera Tike for the info at least this confirms that it's not just a fluke users of rooted stock should be warned appreciate your research. I do wonder why they would change boot animation and IMG seems a bit haneous.
Click to expand...
Click to collapse
It seems they increased the resolution of the images in the file, but for me I can not see the difference.
For me I wonder what they changed in the WiFi driver file, tiap_drv.ko.
Kindle Fire Reboot Problem Solved - Install MoDaCo Rom
Thepooch said:
Wiping cache doesn`t remove data in twrp its factory reset that you need to concern yourself with and unfortunately there is data loss. You may have succeeded but others put themselves in a position of needing a factory cable after not properly wiping when flashing stock. This is because the data is what the kindle has a tough time handling after a complete stock flash. Flashing modaco is far safer, truth is that it will leave your recovery and bootloader intact providing a far better safety net if something were to go wrong. Also if you create a backup before you flash if something does go wrong at least you can restore a half crap backup, wipeout recovery and this is no longer possible just saying. I see far more people fail to flash stock than I ever do flashing modaco.
Click to expand...
Click to collapse
I took Thepooch's advice and installed MoDaCo rom on my KF. It was a snap. I had FireFireFire installed with TWRP. Just downloaded MoDaCo to PC copied to KF. Rebooted to FireFireFire Installed with Install Zip utility. Took a few minutes. Rebooted didn't loose any data , apps or functionality. Its still rooted. THANKS!
No problem you can find the entire uncomplicated method here http://forum.xda-developers.com/showthread.php?t=1923010 or at least a synopsis of the concept.

[Q] Root access occasionally not sticking in Lollipop?

This is a bit of a weird one, so I wanted to see if anyone else had seen this.
I am running a bog-standard DevEd M8 (converted from AT&T) with Lollipop 5.0.1. It is S-off, bootloader unlocked, but not running a custom recovery. I went back to stock after rooting the phone. Most of the time, everything works fine, but sometimes after a reboot root access doesn't work. I usually notice this when AFWall fails to update the firewall tables. However, a subsequent reboot usually fixes the problem.
Not sure what is up with that, but it seems like there is some sort of race condition during startup. It is weird that I almost always get root back on a reboot, though there have been a few occasions where it took two reboots.
I don't restart that often, but it is kind of an annoyance. Enough that I'm seriously considering bailing and switching to a different ROM, but if there was an easy fix I would rather not have to setup my phone again.
If you use SuperSU make sure your settings are configured to allow all root requests at boot time, if you don't use SuperSU, start using it, it's much more solid from my experience than the rest of the root related apps.
JackHarley said:
If you use SuperSU make sure your settings are configured to allow all root requests at boot time, if you don't use SuperSU, start using it, it's much more solid from my experience than the rest of the root related apps.
Click to expand...
Click to collapse
I am using SuperSU, and I thought I had enabled SU during boot. However, upon checking, it seems I forgot to check it when I upgraded to Lollipop. Hopefully that fixes it.
Thanks!

[Q] Really need your expert help guys! SM-T800

Alright, I'll lay out what happened. My end goal is to just have a rooted tab, but at this point, I'd be willing to just have it back to how it was. Preferably without losing everything on it.
-Looked around on how to root it, and found the following, and use the files it suggested.
- Seemed easy enough, and I had rooted/installed android on my old HP Touchpad, so I dl'd the files, and gave it a shot.
- Couldn't get CWM recovery on it, so I ran verify root and it said it wasn't rooted, even though I has SuperSU. It would even ask to grant apps permission, and I'd grant it.
- I opened SuperSU, and it'd say it needed to update the binaries, but would fail on normal, so I dl'd the newest zip, booted into recovery, and tried to load it like that, but 2 lines would come up red. I think they were just verifying signatures, so I ignored it and let it reboot.
- I opened SuperSU again, and it still said it needed the binaries updated, failed on normal attempt. I decided to try again from scratch, unrooting it and all. So, I went into the SuperSU settings and did it's thing, but it still had the version of SuperSU that initially was on it (it wouldn't let me past the "update binaries" prompt).
- I found that I needed to use Odin to flash a stock firmware back on it, and dl'd both version here.
- I tried the first one, and then it wouldn't get past the "Samsung" screen (the 2nd one with just the word Samsung, if it matters).
- I can still boot into Odin and Recovery, thankfully, so I tried the 2nd stock firmware. Same issue.
- Finally, I tried the rooting process again, hoping to get it to boot, same thing. So, I tried the 2nd stock firmware again, praying something good would happen, and still stuck on the Samsung screen.
I can still boot into Odin and recovery, but I have no idea where to go from here. I still want it rooted if possible, and I'd prefer not to lose all my games and such. I just found "[ROOT][RECOVERY] [ALL IN ONE] Cf-Autoroot-twrp-T800-T805-T-700-T705" thread here, but I didn't want to try it just yet.
It's a SM-T800. I had Lollipop on it. Don't know much else to add, but please help!
Thanks all.
Cypher5235 said:
Alright, I'll lay out what happened. My end goal is to just have a rooted tab, but at this point, I'd be willing to just have it back to how it was. Preferably without losing everything on it.
-Looked around on how to root it, and found the following, and use the files it suggested.
- Seemed easy enough, and I had rooted/installed android on my old HP Touchpad, so I dl'd the files, and gave it a shot.
- Couldn't get CWM recovery on it, so I ran verify root and it said it wasn't rooted, even though I has SuperSU. It would even ask to grant apps permission, and I'd grant it.
- I opened SuperSU, and it'd say it needed to update the binaries, but would fail on normal, so I dl'd the newest zip, booted into recovery, and tried to load it like that, but 2 lines would come up red. I think they were just verifying signatures, so I ignored it and let it reboot.
- I opened SuperSU again, and it still said it needed the binaries updated, failed on normal attempt. I decided to try again from scratch, unrooting it and all. So, I went into the SuperSU settings and did it's thing, but it still had the version of SuperSU that initially was on it (it wouldn't let me past the "update binaries" prompt).
- I found that I needed to use Odin to flash a stock firmware back on it, and dl'd both version here.
- I tried the first one, and then it wouldn't get past the "Samsung" screen (the 2nd one with just the word Samsung, if it matters).
- I can still boot into Odin and Recovery, thankfully, so I tried the 2nd stock firmware. Same issue.
- Finally, I tried the rooting process again, hoping to get it to boot, same thing. So, I tried the 2nd stock firmware again, praying something good would happen, and still stuck on the Samsung screen.
I can still boot into Odin and recovery, but I have no idea where to go from here. I still want it rooted if possible, and I'd prefer not to lose all my games and such. I just found "[ROOT][RECOVERY] [ALL IN ONE] Cf-Autoroot-twrp-T800-T805-T-700-T705" thread here, but I didn't want to try it just yet.
It's a SM-T800. I had Lollipop on it. Don't know much else to add, but please help!
Thanks all.
Click to expand...
Click to collapse
Well... you said you just updated to lollipop, but in order to not stay stuck at splash screen, you have to factory reset. I saw that you don't want to lose your games and such so you probably only have one option. That option is to flash twrp and make a nandroid of your data. Simply boot into download mode, download the twrp .tar http://twrp.me/devices/samsunggalaxytabs105.html
And now go into Odin, untick autoreboot, now hit the pda/AP button and pick the twrp tar. Hit start and let it do its thing. Now after its done flashing, your gonna have to force reboot. Simply hold power+volume up and down+home button all at the same time. Wait a bit and when the screen turns black, quickly press power+volume up+ home buttons all at the same time and it should boot into twrp.
Now in twrp, hit backup and hit backup data. Hopefully that should save your apps installed. Now after its done, go into wipe and silde factory reset. It should remove installed apps from Google play store and it won't remove pictures and such. It just removes the apps you installed. Then now reboot and wait....
Hopefully this helped
-DUHA
As said you will have to factory reset, this will wipe data and cache.
You can use the link you posted above to install TWRP and root.
http://forum.xda-developers.com/galaxy-tab-s/development/root-cf-autoroot-twrp-t800-t3079488
Lollipop changes the data partition so even if you back it up and then restore it with twrp In kitkat it likely won't boot afterwards.
All you can do is wipe it and take the hit.
Alright, I have TWRP running. The size of my "data" is just over 16 gig, and my space on the sdcard is 14.9 gig, so I've been trying to delete data to knock it down. I still have 1.3 gig to go. Everything I'm deleting, in the data folder, is barely making an impact.
I see what you're saying that I probably won't be able to restore it and have it work, but I still will try. I can always factory reset it again later. Once I wipe it, though, and update back to lollipop, couldn't I restore that data backup?
I gotta take a break and knock out some real work, lol, then I'll continue, and update here. If nothing else, maybe it'll help some other poor soul like me in the future!
Once I have it booting all the way again, do I just use TWRP to install SuperSU and it's rooted? Thanks again. I appreciate it!
Not sure what youre trying to do here. Just wipe the data partition with twrp,
Sent from my SM-T805 using XDA Free mobile app
Ashyx, I was just trying to save my game data, while ending up with a rooted tab. And you were right, of course! I tried to restore the back up to no avail, haha....well, I wiped it again, and it booted up just fine, and it is rooted to boot. I can't believe it was that easy with TWRP to root it.
I'm betting this isn't going to work out, but is there anyway to extract my game data from that backup I made, and transfer just that back to my tablet? If it is possible, it'll probably be beyond my ability, I bet, but I'm just curious.
One other question. With TWRP, can I get Lollipop back on it? Or do I need something else on it first?
Now, it's off to figure out how to get my Impulse Controller to work with it so I can play my games with it!
Thanks for helping me out, regardless. I truly thought I had bricked my $600 tablet. My wife would've killed me for wasting that much money, lol!
There is an app called nandroid manager that will allow you to extract data from nandroids, you could extract your game data with that.
The better way would be to make a system and data backup of your current system, reflash lollipop then restore your lollipop data backup. Then back up your game data with titanium backup.
Restore your kitkat backup then restore your game data with tb.

On VS98510B, just want to upgrade to latest android, please help.

I have a VS985 LG G3. I was running marshmallow yesterday, but after trying to root and unlock mobile tethering and hotspot (because I am on unlimited data) I managed to brick my phone while typing in adb commands because my phone decided to randomly shut off. So after plugging it into the USB and figuring out a way to put it into download mode, I flashed it to VS98510B. After that, I rooted with Stump Root and installed SuperSU, following some guides. It works fine once again but I'm not where I want to be.
After multiple times trying to open adb shell and get it to just recognize my device, I'm done. I know there are people out there who know this stuff by heart, so please, at this point, just tell me what to do step by step so I can do it and move on with my life. I have spent hours upon hours on this and it never seems to just work. Please.
All I want is to be able to install the latest TWRP or whatever is recommended., and then install either the SkyDragon Rom or the stock marshmallow VS98546A rom, but with the verizon apps disabled since in one guide it warns that those report for modified device, which I am not sure what that means but it doesn't sound good.
I'm on VS98510B. Rooted and SuperSU installed.
I want to be able to use mobile hotspot and tethering.
There's just information overload to the extreme, I'm overwhelmed.
Thanks again if any help is possible.
If you're already rooted with TWRP installed, the hard part should really be over. You shouldn't need to be plugging into a computer and running adb commands at this point. You also said you need step by step instructions, and to really spell it all out would be a lot, but considering how far you already got I don't think you really need every little detail, so I'll give you the general idea then if you have questions I can try to fill those gaps.
Basically you'll need to find and download the new ROM you want. The easiest thing to do is download it directly from your phone so you don't have to mess around with transferring it from your computer to your phone. Many custom ROMs will also require Gapps, but if you're flashing a stock ROM (or a custom ROM based on stock) you don't need to do this because it's included in the ROM.
After you've downloaded the ROM (should just be a zip file), you need to reboot to recovery (TWRP). If you don't know how to do this, there's an app called Quick Reboot that can do it for you (01400) personally haven't used it but I assume it works).
Once you're in recovery, you normally want to make a backup first in case anything goes wrong. This is done by selecting the backup button. After you have a backup, you want to "wipe" data before installing. Select the wipe button, then I click advanced and select everything except internal data and external data. This will wipe all apps, settings, etc. from your phone so make sure you're ok with that before you do it,
After wiping, you're ready to install. Back at the first main screen of TWRP, select Install, then browse to where you downloaded the ROM and select it, then select the Install button and swipe to confirm. Assuming all goes well, when it's finished it'll give you the option to reboot. Do this and it should start booting up to your new ROM.
Also, you mentioned SkyDragon, but I just wanted to point out that this isn't the latest version of Android, I believe that's still Lollipop (not Marshmallow). You also mentioned not wanting your rooted status to be reported to Verizon, but if you're currently on stock, rooted, and don't have any apps disabled, then you already are running this risk.
Let me know if you have any questions. I think this will be easier than me trying to walk you through every detail and confirmation screen.
I don't have TWRP installed. What is the best course of action to take to install it?
As far as disabling verizon apps, is it as simple as just going into the application manager and disabling them or is there a tool I need to download?
Thanks for all the help so far!
I see, it's been a couple years since I installed TWRP and I was thinking it was part of the rooting process. I believe this is the post I followed to install TWRP: http://forum.xda-developers.com/lg-...mp-unlock-lg-g3-twrp-d852-d852g-f400-t2900614
Like I said, this was a few years ago and it's kind of a one-time thing. I don't know if there's something better available now or what, and I don't remember the details. I don't remember running into any problems, so if you happened to have any I'm not sure how good I could help.
As for disabling things, the things that need to be disabled are system apps and can't just be disabled from the stock application manager (Verizon doesn't want to make it easy for you to disable their software ). There are different ways this can be done, but I personally use Titanium Backup to disable (or "freeze" as they call it) apps. It will let you freeze anything, which also means it gives you the ability to break things, so don't just go in freezing random things. I don't remember if freezing requires the paid version of the app or not, but you can get it from the play store and find out.
Sent from my VS985 4G using Tapatalk
As far as Titanium Backup goes, is it along the same lines as TWRP? Like do they do the same things? Do you recommend I do one over the other?
Also as far as verizon apps reporting root, what do they do and what does that matter?
Also, I'm currently dealing with the LG DemiGod Crash Handler problem that seems to have started up on my phone the other day. I'd never rooted or messed with my phone in any way and that started happening, I thought perhaps flashing a new ROM might fix it, but I guess not. If you have any sort of tips on how to fix that, other than replace the battery (which I have not yet done, but supposedly that can solve the problem) I'd be grateful.
Titanium Backup and TWRP are two different things. Titanium Backup is a "normal" app that you can get from the Play store, while TWRP is a custom recovery and isn't ran from within your ROM. TWRP lets you do full image backups of your phone (like your entire phone in a single backup) and can also be used to install ("flash") ROMs. Titanium Backup lets you backup, freeze, and uninstall specific apps.
I use them both because they both serve a specific purpose. You have to use TWRP to install ROMs, then as far as backups, I use TWRP to make a backup of everything in case I flash a ROM that I end up not liking (I can use the backup to easily go back to my previous ROM and still have apps and everything all setup just like they were). If I do like the new ROM I flashed, I'll use Titanium Backup to restore a lot of my apps/data to the new ROM (ex. text messages, my alarm clock app, etc.)
As far as Verizon knowing about your root status, honestly I'm not sure what all that would mean. I'm sure they wouldn't like it, rooting voids your warranty so you probably couldn't get things replaced under warranty, if you have insurance through Verizon they would maybe use your root status as a reason to deny a claim, etc. I don't think you'd have to worry about them calling you up or cancelling your service or anything like that, but getting them to assist you with problems might be more frustrating than usual
Regarding the demigod crash thing, I know what you're talking about but I don't really know much about it. A while ago I would get those every once in a while and it was frustrating. I think at the time I kind off wanted to try a new ROM anyways and I think I did but I still got it occasionally. Now that you mentioned it though I haven't had one in quite a while. I'm not sure if those ROMs both happened to cause it, if it was a Lollipop thing (doesn't seem like I've had it since Marshmallow), or if it's all just a coincidence or I've just been lucky. I haven't gotten a new battery though, so that's definitely not it (for me anyways).
Sent from my VS985 4G using Tapatalk

Help - Galaxy Tab S 10.5 Bootloop Out of Nowhere

So...
Last week, my wife's Tab S went into a bootloop. She runs complete stock, we haven't rooted, or anything. There had been a notification about an update, but she hadn't touched it. She'd updated to Lollipop at some point last year, but hadn't applied the absolute latest update. One day last week, she just turned it on, and it started bootlooping.
Because it was so stock, there were no backups, no nandroids, or anything like that. No Custom Recovery. I told her "well, we can just do a factory reset. You'll lose everything, but once we get you back up and running, it'll just re-download everything from the Goog." So we factory reset it. Looked good for a minute, booted into the first screen, enter in your Wi-Fi password, all that. As soon as we got the Wi-Fi password entered, however, it re-booted. And keep rebooting. Bootloop city. No problem. I walked her through (over the phone) using Odin to flash the latest Lollipop firmware. No dice. It appeared to flash successfully, but still bootlooped.
Over the weekend, I tried using Kies to flash the most official firmware I could find. Everything was successful -computer recognized the device, was able to download "direct from the source," as it were, but it got stuck at 69% twice before failing. I read somewhere that one had to run Kies in administrator mode to get it to successfully complete. So I did, and it got past 69%, successfully completing the flash. STILL NO LUCK. STILL WITH THE BOOTLOOPS.
Last night, I realized that I hadn't flashed in Odin using Administrator Mode. Tried it, using latest 5.0.2 (XAR-Cellular South). Flashed successfully, all appeared well. Still bootlooped.
So, I'm stuck. I can get into recovery, I can get into Download Mode, I can successfully flash. I just can't get the darn thing booted.
Thoughts, anyone? Should I try flashing a Custom ROM? How hard is that using Odin? Thanks in advance.
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Nandr0idC0nsumer said:
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Click to expand...
Click to collapse
Thanks, I'll try these steps tonight when I get home, and report back!
All right, here's something interesting. Before I tried your first step, I remembered that the other night, I left it stuck at the Samsung logo -it was just kind of stuck there, and since the behavior was a little different than I'd seen before (not continuous bootlooping), I thought I'd boot into recovery and wipe. I did, I wiped (factory reset), and rebooted. The tablet booted into the first screen, Accessibility/Wi-Fi, blahblah. This was where it usually rebooted. On a hunch, I bypassed entering in my WiFi key. I then bypassed almost everything else (Samsung account, Google account, etc.), expecting that the tablet would reboot at any moment. But I made it to the front apps page, where it shows you the side-launcher, the Magazine-Flipboard thingie, and whatnot. Wi-Fi still not connected, though. I opened up the app drawer, and scrolled around. Looked really good for a moment. I even took a picture with the camera, and viewed it in Gallery! Feeling brave, I thought, "well, maybe it just needed a couple of minutes before firing up the radio." So I went into settings, and inputted my WiFi key. It connected. And rebooted into its bootloop. (getting so tired of that boot-sound).
Went ahead and flashed the most original stock firmware I could find. As always, flashed successfully. As soon as it booted, I made my way to recovery, and wiped, per your instructions. No luck. Bootloop again.
It's something in the WiFi is what I've come to think as a result of the above. Which I don't entirely understand, as I thought the radio got re-flashed with the firmware.
I'm ready to try flashing a Custom Rom. Can I do that through Odin, or should I try and flash TWRP, and do it through there? Will TWRP flash without a working (bootable) OS?
All right. Thanks for your response!
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
ashyx said:
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
Click to expand...
Click to collapse
Got TWRP installed. Won't backup. Fails at 16% (system partition, I think). Just powers down to battery indicator in the middle of the backup. Looks like it backs up the EFS, though, since it's the first one. And when I go into TWRP's Restore option, there's a backup there (though I don't dare try and restore it).
Now I have to figure out a way to get the Custom ROM and GAPPS I downloaded onto the tablet without a reliable boot... It's gotten to the front screen a time or two tonight, but starts looping even when I bypass the WiFi setup.
Entered adb/TWRP interface. Tried to push two files, a Custom ROM file, and a GAPPS file. The ROM failed, with some sort of "Error 7," incompatible data, blahblah... Just out of curiosity, I tried to push the GAPPS file, and that failed after about 6%, and the tablet powered off.
I'm running out of ideas.
copied a custom rom to a USB/OTG stick (thumbdrive), and plugged it in. Fired up TWRP, tried to install. Wouldn't. Wouldn't install GAPPS, either. Looks like the only way it wants to flash anything is through ODIN or KIES.
The Latest...
All right...
I remembered that sometimes the TWRP version mattered. When I installed TRWP last night, I installed the latest and greatest, 3.0.2. Last night after I gave up, I remembered that sometimes, the latest and greatest TWRP doesn't install things perfectly. So, this morning, I downloaded TWRP 2.8.6-ish onto the USB/OTG device, and re-flashed the recovery partition. To be honest, I was surprised that TWRP was even able to flash that (but the TWRP image is only like 9.8 MB, so...)...
Got TWRP 2.8.6.0 flashed, and rebooted into TWRP. Immediately decided to try and re-flash the custom ROM that I'd tried unsuccessfully to flash last night, since the thumbdrive was still plugged in. Resurrection Remix Lollipop. Lined up GAPPS in the queue, as well. The ROM *appeared* to flash better than it had in TWRP 3.0.2, but it was sort of hard to see... GAPPS failed, and I was prepared to watch another round of bootloops. It did bootloop, sort of. The RR splash screen appeared, said that it was installing (or preparing) xx out of XX apps. Then, it rebooted. I figured it was doing its bootloop thing. However, it got to the same screen, "installing xx out of XX apps. Except that XX number had gone down, and the xx number had gone up. It repeated this action about 4 times --the last time I saw it reboot, it was "installing 1 out of 2 apps." And then...?
It booted into the RR lockscreen.
Of course, there were no GAPPS. In fact, there are something like only 20 apps total on the tablet. But it appears somewhat stable at the moment. (See picture).
Afraid to try and connect WiFi, afraid that it'll just bootloop.
Speaking of bootloop. At one point, once we got it booted, my wife hit an option in the Settings. LCD Density, I believe. As soon as she hit it (she literally just placed her finger over the 320 default option), the tablet rebooted. No loop, though. Rebooted straight back to the RR lockscreen.
So I appear to have a somewhat stable OS flashed onto the tablet at the moment. No GAPPS, though. No WiFi.
Anybody have a suggestion on where to go from here? I have my doubts as to whether or not I can even back up this configuration.
Sorry about all the updates. I kind of figured that if *anyone* else ever goes through what I'm going through, they'll have some sense of all the different things that can be tried in resurrecting a bricked/bootlooping device. I appreciate everyone's efforts to date -thank you so much, @Lightn1ng and @ashyx.
All right, because I can't leave well enough alone....
I got WiFi up and working. Tablet still stable and working. Wheeeee.... No GAPPS, though.
Downloaded GAPPS, second-smallest package from opengapps- only 128M (5.1 ARM package). Downloaded it in Android, from the tablet! Tried to flash it in TWRP. Failed, tablet rebooted halfway (not even) through. Now it's bootlooping again...
I should've left well enough alone, and waited for someone. Have tried re-installing Resurrection Remix, but tablet keeps failing to flash. Might have to try and flash a different TWRP. I don't know...
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Lightn1ng said:
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Click to expand...
Click to collapse
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
I'm running out of ideas!
Maybe somebody else with a T800 could backup their entire EMMC using
Code:
dd if=/dev/mmcblk0 of=/sdcard/full_nand_dump.bin
And you take the file on your tablet and do
Code:
dd if=/sdcard/full_nand_dump.bin of=/dev/mmcblk0
And restore YOUR efs folder using TWRP.
THIS IS A DANGEROUS OPERATION AND I AM NOT RESPONSIBLE FOR ANYTHING THAT GOES WRONG!
---------- Post added at 08:01 PM ---------- Previous post was at 07:57 PM ----------
@ashyx Any more ideas before I go ahead with my evil world domination plan to recover this device?
I wouldnt carry out any risky operations until a full backup can be made with twrp or you may end up with an unrecoverable device.
If twrp cannot backup the system partition then there is an issue with the partition.
Try backup again and post the recovery log, it may contain some relative information.
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Exactly the same issue on my LTE version.
Samsung support just asked me 230€ for a new motherboard.
I refused to repair. I think it is related to nand memory..
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
srfairhurst said:
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
Click to expand...
Click to collapse
Why not just update to Marshmallow? Absolutely no issues for me.
ashyx said:
Why not just update to Marshmallow? Absolutely no issues for me.
Click to expand...
Click to collapse
Now i figured out its the wifi thats causing the problem i will update to android 6.01 or if i can find a good custom rom il risk that.
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
DrinkSlinger said:
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Click to expand...
Click to collapse
Hello,
and the rest of story??
i can flash TWRP in download mode, and i can intall zip by TWRP , the lineage rom,
but, cant odin flash official md5 file, it stucks on logo.

Categories

Resources