Related
So the first thing I noticed was that this is not a slider, but a front-and-back snap case. The product description says "Unique snap together design and opening slot makes putting on and removing your case easy" but for some reason thought it was a slider like the Surface II for the Captivate. So, it's not their fault I misunderstood.
Since the front bezel cover is so thin, my initial impression is that it seems a little flimsy. The back cover is also quite thin and has no lining like other Seidio cases. I think this was a conscious decision in order to keep the case as slim as possible. The fit is quite precise, so I don't think the lining would really make much difference as there is no movement within the case.
Although the front bezel piece seems flimsy at first, it feels quite sturdy once you snap it to the back cover. I do have some concerns the clips that snap together will wear down over time if you remove the cover frequently. Only time will tell on that point.
It has Seidio's "signature soft touch finish" which is like a somewhat rubberized matte texture. It's quite nice, but attracts prints if you have oily fingers.
Overall, the fit is pretty much perfect and the cutouts are precise. It's very thin and has a nice texture. Of the six cases I have, it's certainly the nicest. It does, however, cost about as much as the other five cases combined - $29.95.
At $19.95, I'd probably recommend it in a second. At $30 I have some reservations, namely the long term durability of the clasps that keep the two pieces together.
Vibrant case wont work
should be gettin mine tomorrow....
i think they have 6 month warranty which actually does work. thats another big plus with this company.
kolyan said:
i think they have 6 month warranty with actually does work.
Click to expand...
Click to collapse
Good to know. Hopefully won't have to use it.
Thanks for the review.
I'm still sticking to my white mesh case. I like really light and almost-not-there type of cases.
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
s15274n said:
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
Click to expand...
Click to collapse
For reference, I've had TPU's, hybrid TPU/Plastic (the one with hard clear back), a generic version of the Barely-There, and a flexible plastic perforated case (XMatrix Cover from DayDeal).
The added size and weight is similar to the XMatrix perforated case. It's not as slim as the Barely-There style cases, but I think it's definitely lower profile than TPU or silicone.
The finish is nearly the same as the Barely-There knock off I have, but seems a little more durable (the coating on the old case started to come off within days). It's smooth, almost suede-like, but has a bit of tack when held in the hand. When put on a smooth surface, like a desk or on wood trim in a car, it does not stick at all. This is a bit of a negative for me. One thing I like about TPU cases is that they kind of stick when you lay them on a smoother surface (I usually put my phone on the wood trim next to the gear shift in my car) but are not tacky otherwise.
As for the volume buttons, mine are not loose so I can't really comment on that issue.
One other thing I've noticed in the last few days of using the case, is that bezel cover is attached to the bottom part in only a few spots so there is some give in the areas that aren't clipped together. I think they should have added a couple more contact points on each side. It's not terrible, but I'm a bit OCD so it probably bothers me more than it would most other people.
I'll report back, should be here anytime now.. thanks man.
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
kolyan said:
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
Click to expand...
Click to collapse
After waiting around for the SGP Slider, I was also hoping this would be a sliding case.
I did get to hold a Captivate with the Innocase II, which is a slider, and the fit was pretty awful. It moves around a ton compared to this front-back type. I guess I'll take this style and more precise fit over slider with a bad fit.
Is it the bump on the Vibrant that is the main issue with a slider?
I was a bit let down to find this was a snap on the front/back design.
new coupon good through Sunday: MIX15
buy 2 products and get 15% off, free shipping for 2010
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
djjeesh said:
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
Click to expand...
Click to collapse
it is nice and clean. my nexus one case fits better, but they probably had to make it clip-on design i guess for Vibrant bump
Nice review! I can't help but feel like Seidio threw this product together in a hurry, after they realized there are people with Vibrants. It just looks cheap compare to their other offerings.
Just got it. initial impressions:
1 feels great in the hand. Looks good too.
2 I absolutely hate how easy it un-snaps.
3 I want to know their return policy till they have a legit case like the ones I am accustomed too from seidio.
4 it's much more difficult to press power now.
EDIT: okay, found out how to do the return, just waiting to hear back from them.
So fairly recently i purchased the Cyclops case from Trident after watching
bobofosho123 video review and figured i'd make a post about the case and raise awareness of a good case
The case overall is great. It added the bulk and safe to grasp feel to the phone, without the case I always feel like i'll crush it in my bear like grip
Ordered it in White, probably a mistake as the white took on a dirty color to it rather quickly. the white plastic on the back side feels soft and gentle. And the silicon outer ring is great for what it does. I've launched the phone outta my lap a few times getting out of my truck and everything is all stars and sparkles still (good).
Has the built in screen protector which I have not noticed to alter the touch sensitivity at all, (also great at protecting.) And just about 0 picture alteration. The protector also covers the light sensor... which i have noticed causes the phone to not recognize it's not near your face after a call is over.
-so i cut it out- and everything is swell again.
The power and volume buttons on the side work wonderfully with the silicon strip over them.
**Couple other downsides for me, might have been the molding on the silicon for my specific case, but the tabs to pull the plug out of the usb and headphone jack seemed almost non existent making it rather hard to open them up.
And the seperatly purchased holster has been out of stock forever. ((((EDIT)))) finally in stock and ordered
because of this I put the phone in my pocket and like most silicon and gel cases it collects pocket fuzzies of doom rather well.
the closeness of the bezel near the screen does make it hard to bring down the notification slide. ( but i use the swipe down gesture in ADW for that anyways.)
After having quite a few cases, the casemate you can get at the tmobile store, the gel cases, some plasticy snap ons, just a generic belt holster thing, otterboxes case. I will stick with the cyclops.
All in all worth every $$ it cost. I.M.O.
I have to say that I disagree, I originally purchased this case and I was disgusted by the quality.
In my experience the built in screen cover really took away a lot of screen sensitivity. I had to apply a lot more pressure to type any of the letters on the side of the screen, even using when using swype! So I ended up removing the built in screen protector, it was no big deal it popped out with a little pressure.
The next problem I had with this case was the headphone and micro usb port connectors, the phone already has a usb dust shield built in so why protect it? They were just too hard to remove and I use my vibrant daily to listen to music and to transport files between home and school so this was another annoyance.
I used the case for about two weeks before I could not stand the bulk and the cheap feel of this case, I swear the silicone would pop out of place every time I put it in my pocket.
After everything was said and done I went back to my body glove case and used it until it broke because I dropped my phone while riding my bike then I ordered up an otterbox and could not be happier. Best case for the vibrant in my opinion, slim, no frills and plenty of protection.
Don't buy one of these cases it is a waste of $30, trident cases are nothing but poorly designed bs.
I also have the Trident case and am.very happy with it. It provides wonderful protection for me. The only
Issue for me is that it is not pretty to look at lol I'm s girl lol. The black and grey.was the best looking out of the selection and goes quite well with the Trigger rom I love so much. I like the look of the Otterbox and may purchase one in the future. For ultimate protection I would recommend the Cyclops case. No issues with the screen protection at all.
Sent from my SGH-T959 using XDA Premium App
There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.
Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?
The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.
I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.
fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.
Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.
I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.
Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T
http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.
Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)
And what about silicone cases? Soft ones I mean..
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels
Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks
clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am
hard case with soft grip
or you can call it a "grippy" hard case
rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you
just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....
rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.
any review or comment on book cover case by samsung....
Mine just came today, previously I used a cheap fake leather case that made the tablet big an bulky, and it didn't feel very nice (http://www.ebay.co.uk/itm/Black-Lea...ting_LaptopAccessories_RL&hash=item27c2fcc11c).
So I decided to buy the official book case from amazon, I didn't think it would be very nice, but it came today and I am very impressed. It looks very nice and expensive on the tablet. As in it looks premium, and not cheap like my fake leather case. It fits the tablet perfectly. It doesn't feel like a chore to have the case on, it actually makes the tablet very nice and very comfortable to hold. I would strongly recommend this case.
It feels nice, it's the thinnest book style case I have seen by a lot. It looks very nice & premium, and it will protect your precious tab. The only downside is that it is a bit expensive, and the weight with the case on is noticeably more + the cheap leather one is a lot more bulky and will provide slightly better protection at the expense of comfort and looks. I think it really is the best case by far for this tab, nothing come close in my opinion. I hope this helps you.
I was your 60th...
Had to thank you though because I'm looking for a great case.
Sent from my GT-P7510 using one finger.
Benzoman said:
I was your 60th...
Had to thank you though because I'm looking for a great case.
Sent from my GT-P7510 using one finger.
Click to expand...
Click to collapse
Thank you very much
I've also got the Samsung Book Cover Case. I like it a lot except for one issue:
In typing angle, the tab is actually upside down. This causes 2 problems:
1. some apps that force landscape mode will default to the right-side-up landscape mode and therefore appear upside down. There doesn't seem to be any way to override this behavior on the tablet so you're force to physically rotate the tab and either lay it flat or use a steeper angle.
2. With the tab upside down, the ambient light sensor gets covered by the shadow of your hands while typing (or even swiping, tapping) so that the auto brightness feature keeps dimming and undimming the screen. It's pretty annoying. At least there's a workaround - you can disable the auto brightness.
Still, I'm thinking of trying one of the smartcover cases since those will let you set a shallow or steep angle with the tab right-side-up in either case.
Anyone compare the samsung case to a smart cover case. I'd be curious if they are any heavier or bulkier.
Oh, I'm also a little concerned the crease where the flap bends will eventually crack. Has this been an issue or is it pretty sturdy?
Thanks!
Just wanted to do a review of some cases I bought and tried recently for my LGOG, hoping the info would be useful to other people. There are some other good and cheap options available online, but these are the ones I tried first-hand. I am really happy with all three of them, so here's the proof that sometimes you get more than you pay for...
First, a generic sleeve picked up at a local dollar store while I was waiting for my Amazon order to arrive. For just $2, it's pretty much as good as free. Simple, but ingenious: two pieces of synthetic leather (it's high quality, smooth, soft, and doesn't stink) stitched together, but with an added pullout ribbon that is surprisingly convenient, and works wonderfully to get the phone out. My wife was quite amused by the way it worked (as was I ). Sized perfectly for my phone, and looks pretty nice and elegant, too. Excellent basic protection sleeve, considering the price. Highly recommended, if you prefer your phone naked, but still want reasonable protection carrying it around. Five stars from me!
Next comes the Diztronic case, ordered from Amazon. It's a low-profile TPU wrap-around skin that looks and works much better than it costs. Very nice soft touch finish, clean design with precise cutouts, sharp looks and enough protection for daily use. The fit is perfect, feels like this phone was born in it. Some people on Amazon complain that it peels the screen protector at the edges due to a tight fit, but I don't use screen protectors, so I don't care. Adds very little bulk, but gives a nice protection around the bezel, so you can safely lay your phone face down. It also levels the protruding camera lens cover on the back, so it doesn't get scratched easily. One thing that seems weird at first is that the design around the volume and power buttons is very different. But then I realized how much it actually helps -- the power is recessed deeply in the cutout, making it much less prone to accidental presses, while still easily reachable with a fingertip. Very convenient. It would be nice to have a better grip on the sides (like a diamond pattern or something), but even as is, this case still makes the phone much less slippery than naked. And I didn't like the prominent logo on the back, as I prefer all my things with as little branding as possible (ideally, none, but that's just wishful thinking). Four stars (minus one for the grip and the logo).
The last one is a cheap dual-layer case pretending to be an OtterBox, also from Amazon. I saw this case there under different brands; mine was Aimo. I used OtterBox cases in the past, and to be honest, this one is quite impressive in comparison. Pretty much the same design features (except the port covers), build quality and the level of protection as Commuter series, but for just a small fraction of a price. And it has a handy folding stand on the back, which works in both portrait and landscape. If you are reeeally nitpicky, you might find the fit between the inner silicone layer and the outer hard shell a tiny bit loose along the top and bottom edges, but hey, it's not exactly an OtterBox, OK? Again, you really have to look hard and close to notice this. All the cutouts are precise, and the buttons are nice and light to the touch. Note that this case is quite bulky, and doesn't match the design style of the phone itself, so some people may not like it for its aesthetics. But as far as protection goes, this is probably the best option for this kind of money. This case is available in different colour combinations. Nothing beats black for me, but you can get yours in neon pink, if you want. Five stars, hands down!
Thanks for these suggestions and pics.
My first case for OG was Nilkins hard plastic case - at first it may look good, but actually is a piece of you know what. The rubber layer on the case started to peel off after 2 weeks first on the corners then the rest, due to this the phone looked ugly. After a while corners just broke off completely. All this happened with regular use without any extremes.
The next one I bought was a bit cheaper also from China - TPU X Type soft silicon I guess. I've been using it for many months now and it havent changed a bit. Good protection, looks nice and I guess it wont change forever unless you cut it with scissors
So yes, cheap can be good, but buyer beware as some cheap cases will be a headache.
I have this one:
aliexpress: /item/Genuine-Brand-New-IMAK-Crystal-series-PC-Ultra-thin-Hard-Skin-Case-Cover-Back-For-LG/1027800082.html
Phone looks nice in it. The plastic is sturdy, but it scratches easily. However it's a cheap one so no risk in trying it.
And the classic one gel case:
aliexpress: /item/Hot-Sale-8Colors-S-Curve-Line-Shape-High-Quality-Soft-TPU-Rubber-Wave-Gel-Soft-Skin/1310173671.html[/url]
This offers complete protection, but it's ugly.
PS: Just copy rest of URL after aliexpress.com to see it. I'm not allowed to post links.
First case I got was this: http://www.ebay.com.au/itm/QuickSan...lePhoneAccessories&hash=item3f25597db6&_uhb=1
It still works great to this day, but peeled the screen protector off.
I have had many E975 cases, flip ones, rubber and hard ones.
Currently I am using the LgOg official bumper and it is a dream, sometimes the holes are tight but I simply file them and they work fine
The bumper: http://www.ebay.com.au/itm/181246366449?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649