Trouble Installing CM-11 Remix - Samsung Galaxy Nexus

Hey guys I'm having trouble installing CM-Remix 11. The rom is amazing, I installed an older version and it worked amazingly, but after I turned it off and turned it back on (I simply had it sleep for 3 days, never turned it off) the screen would go black after a couple seconds in the boot screen. The phone is not turned off, 'cause the LED light still flashes when charging and it vibrates when holding the power button.
I tried installing the newer versions, but now the ROM wont even install. It goes black on the boot screen like before. I've tried factory resetting, formatting the entire phone and sideloading the ROM but nothing works. When using the ROM it was super smooth and had awesome features so I'd love to be able to use this ROM. I have been able to install other ROMs, regardless if they are 4.4.x or 4.3.x.
Any suggestions?

Related

Black Screen, Unable to boot after CM12 installation

I decided to install Cyanogenmod 12 on my LG G3. Everything went fine until the point of configuring apps and he final reboot. The screen went totally black. I tried rebooting normallly and rebooting into recovery but there was no boot animation or the LED did not even flash. I tried charging the phone but the still doesn't want to boot. I tried to install the stock firmware through download mode by pressing the volume up and plugging the phone into a PC, but I am even unable to go into download mode. If its like the phone's battery is not working but I do not think its battery since it happened at the moment when I installed CM12, unless it was an extreme couincidence. Thank you for your help!
What variant do you have, and what did you install? (D855?) Also try removing the battery and then powering it back up.
Sent from my LG-D852 using Tapatalk

Sleep/Wake problems [SOLVED]

So i was using Darthstalker v3 and arter97 kernel 9.3 with no issues.
Suddenly one day, i noticed screen flicker when waking the device, followed by hesitation. So my first step was to wipe the dalvik/cache. That apparently did not help.
I then lost my bootup logos, as well as shut down, along with the screen pretty much refusing to come on.
I used smart switch to emergency recover the stock firmware. Nothing. Then i Odined a stock untouched rom. No change. Once i actually got the phone to render the screen in recovery, so i wiped everything three times, and and flashed darthstalker v6. I also rooted the phone again just before that. I
So when the phone is powered off, the battery icon is present, and the screen wakes to that no problem. Since i set the device to never timeout while charging,
when i plug it in, the screen comes on, but as soon as i try to touch it, poof, the rendering of the screen goes. But, while this occurs, i can hear the icons being pressed,
etc. Completely stumped as to what to do. Can someone help?
[SOLVED]
strangely enough, I found a solution in a most peculiar way.
I managed to finally get into the phone by charging to 100 percent. Then, I downloaded flashify, and attempted to flash tekxodus rom, as well as selecting dalvik and cache wipe.
The flash did not work. the phone just rebooted. Then, I downloaded rom manager premium, and then rom manager attempted its prerequisite attempt to detect my recovery. (up until that point, I had twrp installed).
The detection lingered, so I pressed the back key and selected reboot into recovery. Surprisingly enough, I was back in Stock recovery.
So apparently the solution to the anomaly I encountered in the OP, is to either follow the simple steps above, or, to flash stock recovery in Odin. If that is at all possible for the user. I can confirm the above worked for me as I tried everything for the last week and this was the only method that worked.
The shutdown/startup logos are back, with no screen flicker or hesitation on sleep/wake.
msmercy42 said:
So i was using Darthstalker v3 and arter97 kernel 9.3 with no issues.
Suddenly one day, i noticed screen flicker when waking the device, followed by hesitation. So my first step was to wipe the dalvik/cache. That apparently did not help.
I then lost my bootup logos, as well as shut down, along with the screen pretty much refusing to come on.
I used smart switch to emergency recover the stock firmware. Nothing. Then i Odined a stock untouched rom. No change. Once i actually got the phone to render the screen in recovery, so i wiped everything three times, and and flashed darthstalker v6. I also rooted the phone again just before that. I
So when the phone is powered off, the battery icon is present, and the screen wakes to that no problem. Since i set the device to never timeout while charging,
when i plug it in, the screen comes on, but as soon as i try to touch it, poof, the rendering of the screen goes. But, while this occurs, i can hear the icons being pressed,
etc. Completely stumped as to what to do. Can someone help?
Click to expand...
Click to collapse
yeah i just suddenly started having this problem. my phone would reboot itself and then it would be updating apps as if i just flashed xposed or something, my phone would have issues with wifi, flickering lockscreen, and if you rub the screen while its off which wouldl show you information stream doesnt work either. Decided to dump the rom. Am going with the TEKXodus N5 with arter kernel
powerful111 said:
yeah i just suddenly started having this problem. my phone would reboot itself and then it would be updating apps as if i just flashed xposed or something, my phone would have issues with wifi, flickering lockscreen, and if you rub the screen while its off which wouldl show you information stream doesnt work either. Decided to dump the rom. Am going with the TEKXodus N5 with arter kernel
Click to expand...
Click to collapse
It's just like I told you. When I read that you had experienced the same precursors that I came across with the rom, I had a hunch you would be soon after posting the exact issues that I eventually ran into.
So when you download Tekxodus and flash, please keep me informed as to if it resolves the issue. As you are aware, stock firmware has not resolved the problem for me, but then again devices vary.
So enjoy the fix if you ever run into the above issue.
Im fine with stock, but I miss the fun of trying new roms.

Overheating, freezes, and screen artifacts

Hello,
Ive had this device for now 3 months and never once had a problem. I did however stay on stock for quite awhile just rooted. Recently Ive been testing out different roms and ran through quite a few until I heard about the all mighty CM gem by Sultan. So I figured I would give it a shot. Went ahead and downloaded that along with gapps like any other rom. Booted into TWRP and wiped both the system and cache/dalvik. Then went ahead and attempted to install the rom. Unfortunately midway through it froze and my screen artifacted. I figured I would give it a few seconds and the screen turned black with the notification light turned on. I then tried to reset it with a volume+power combo and nothing happened. After about 5 mins of letting it rest it turned back on.
I went ahead and tried this process again thinking it was just a fluke but nope happened again. So I figured it was a corrupt zip file and I would just go back to the stock image I flashed before which was working perfectly fine. Again froze and gave me artifacts. Hoping to find an answer I downloaded the latest TWRP image and flashed the roms again. Same outcome. I even went out of my way to flash the stock recovery, fully reset all my data through there and then reflash TWRP and sideload Sultan's CM. Which I for once actually got into the ROM however now whenever I get into the ROM my phone overheats instantly and I get the nasty artifacts back along with a reset of the phone. Well kind of the screen goes black and I have to wait until it cools off to turn it back on or else it wont turn on.
Anyone have this issue? Anyone know how to solve this? This is my only phone and I go off to college next monday. Thanks in advanced.
UPDATE: I now cannot get the phone to turn on. No haptic feedback, no LED notification light, no recognition in windows. Literally a paperweight at this point.
The same here, flashed CM and Gapps...
Phone hangs on boot, rebooted the phone and now it won't go on..

Suddenly corrupted system, lit blue LED, fastboot only

To begin with, the device was rooted with Magisk 18.1 flashed about 2 years ago, running stock OxygenOS Oreo 8.1. Recovery: TWRP-3.2.1-1-cheeseburger. Kernel: RenderZenith OP5T [OOS-O-EAS-V3.7.0]. This was the setup I was satisfied with and running in about a year (a total of 2 years).
However, after the first year, I've tried to update TWRP to version 3.3.1-20190908-0-codeworkx-signed-forcedecrypt-dumpling in order to flash and update to the newer OxygenOS Pie 9.0. Something went wrong after flashing the newer TWRP and I couldn't get into recovery anymore... all I saw was a black screen when trying to get into it. I haven't bothered about this since the system booted and worked fine, so I gave up on the 9.0 update and stayed on 8.1. I was able to use it like normal another year. Everything was running very smoothly until a couple of days ago...
The battery has discharged to 0% and the device shut off by itself. 30 seconds before the shutdown, the UI was much less responsive and a popup about the device turning off popped up. I've put it in charge the whole night and when I woke up in the morning... couldn't boot into the system anymore. Instead, the phone booted into the 'broken' recovery, with constant lit of light blue LED (started to lit a couple of seconds after booting, only in the 'non-visible' recovery), and a black screen. I've looked up the fastboot/bootloader keys combination and went into it, well from there, I've tried the turn-off, start, recovery, and bootloader option. Turn off = Off. Start = Recovery. Recovery = Recovery. Bootloader = Bootloader.
The next step I've done was to connect it through a PC and run ADB on it in order to flash the old TWRP-3.2.1-1-cheeseburger. Re-booted into recovery straight after successfully flash and the recovery started to work again. The light blue LED stopped to lit any longer and I haven't seen it anymore. The first thing I've done in recovery was to clear the cache, dalvik, and do a nandroid backup, then tried to re-boot into the system. Finally, it booted into the system and I was happy like a kid when I saw the OnePlus boot animation again, however after putting my password and SIM pin code, I can enjoy it without any issue for about 30-40 seconds before the UI suddenly starts to be non-response (touch doesn't work), the screen starts to flash, sometimes (looks more like turning the screen on and off), until I see a "Turning off..." popup 20-30 seconds later (the battery is fully charged and disconnected from the power source) and the device is rebooting itself into the 'working' recovery. This is how it works each time I boot up into the system now. However, the power button is working and I can turn the screen off and on while the screen/touch isn't responding, the power menu can be opened by holding it (before it's too late and the "Turning off..." popup appears), from there I can choose to re-boot or power off. Magically the touch is working here. If the phone has been rebooted/turned off manually, by hitting either reboot or power off in the power menu, it reboots into the system instead and the same **** happens - not to recovery like it does when the "Turning off..." popup appears and it's turning off by the system.
I'd like to get everything back if possible, at least for one or two days, to back up all data, do some screenshots, back up browser bookmarks, history, open tabs, sms and calls, then give a fresh custom 11 to it.
Any help I can get from you guys? Is there a solution that I could try? What about flashing the newest Magisk onto it? Might it help or rather corrupt it more? Anything else? I'm out of knowledge in this situation and I'm relying on you.

Stuck in too-low-power-to-boot state (bricked?)

Hello!
After recently getting my hands on an old Samsung A50, I thought I might as well reflash and do some stuff with it.
After installing Orangefox and Lineage, everything worked fine until the phone eventually ran out of power.
I plugged it in and let it charge for a bit, but it was just constantly showing the gray circle with a charging/power icon in it, but no battery indicator.
This usually means that the phone is completely empty and has to charge a bit before booting.
After letting it sit for a long while and nothing changing, I got a bit worried.
At this point, unplugging the phone does not change anything - it will continue showing the indicator even while unplugged.
Holding power and volume down (or power + both volume) briefly blacks out the screen, but it simply comes back to the indicator a few seconds later.
All of this happened a few days ago - I eventually got it to boot again through some key combination while the screen blacked out, sending me to orangefox or download mode (i dont remember),
from which I was then able to boot into lineage again. In lineage, everything worked fine again, including the battery indicator which showed that the phone was full, and the battery seemed to work completely fine.
After that, I turned from lineage to Fresh, which also ran fine until Fresh wanted to install an update which sent me to TWRP. Not sure what to do, i just booted back into System which worked fine, but the Fresh update hadn't succeeded.
I attempted to update again and this time shut down from TWRP - big mistake. Now i am once again stuck in the low-power indicator.
I believe that last time i escaped by booting into orangefox - but i think fresh replaced orangefox with twrp?
Anyway, i tried holding different button combinations while the screen is briefly blacked out but nothing is happening (also tried getting into download by plugging into pc, holding power+volumedown, then holding volume up+down while screen is black).
I also let the battery empty itself until it went black by itself and then tried again, but no success.
I'm now again unsure what to do. How do i unbrick this to boot into the OS again? How do i prevent this from happening again?
Thank you all.
Same issue with my Redmi 9, it seems a battery issue idk if i had rekt mine after flashing a latest CN rom then after not being satisfied tried to flash thru recovery to its stock rom and it went bootloop. Fixed it by flashing with SP flashtool and some bypass stuff, but damage has been done with my batt. Maxing out the volume when I try to play something video or music would trigger a reboot to my phone.

Categories

Resources