im trying to stock firmware my phone but i keep getting this error in odin
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> NON-HLOS.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
have i downloaded the wrong firmware or what i cant get it to connect to kies either as its on ODIN mode
Dial *#1234# and make a screenshot pls
i wish i could im stuck on firmware upgrade encountered an issue
i got kies to work on a firmware recovery ill post too see if it works
did it wooppppp thanks for your help man
Related
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
raolemo said:
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
Click to expand...
Click to collapse
Try pressing Ctrl+Alt+Delete and go to "Processes" and search for the following process :"KiesTrayAgent.exe","Kies.exe","adb.exe"
If you seen that all in the processes of your PC/Laptop , Make sure to end that all process before proceeding up with Mr.Odin
Because mine i've flashed my DXLA1 Firmware because i always encountering SD Card issues so i ended up downgrading my DXLA1 to my Factory Firmware DXKK4
In this way , Mr.Odin helped me
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
install some other version... kill kies / adb processes... make sure ur cable is fine
got it right
there was some problem with the kies splitted files so downloaded the firmware from from another source n now got it working thx guyz
Hey everyone,
So I was flashing my cousins phone... and I asked him if it was a bell phone because his service is with bell turns out it was a Rogers phone that was unlocked. Now the phone says "Firmware issue encountered an issue. Please select recovery mode in kies & try again" I already tried flashing the Rogers stock firmware on there and no success. anyone have any tips?
When flashing the Rogers official rom again this is Odin's log.
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Hi, i installed google edition 4.4.2 and i want to recover my oficial ROM again becouse i have a lot of problems with this new ROM, the problem is that i forgot to make a backup, i have download the oficial firmware of my s4 ( GT-I9505 Spain (Orange) but when i use odin appear this message:
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
What can i do? the problem is not the Tar becouse is the official firmware and i have tried all USB, what is the problem?
Thanks Relam10
Hi, I have to re-flash stock firmware to fix my phone which has numerous errors (never rooted.)
The first problem I encountered was no PIT partition, and I promptly downloaded it online for the model, SM-N910A, and now recieve this when I try to flash it;
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Write)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone also now says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Even after re-installing drivers in kies, my phone does not appear in the "list of devices needing emergency recovery". What do I do to fix the kies issues, and then can I still flash stock firmware?
I'm a total n00b at android and need your help.
I have a Note 4 on ATT. Using ODIN a while back, I tried to load Marshmallow on the phone using an .md5 file (2 gb). The process completed, but the phone is stuck at the ATT Logo. Does not boot.
I understand ATT has a bootlock on the device. I want to restore everything to stock the way it was so I can use my phone. I tried DL'ing a few roms that were labeled as "stock" but I get an error on ODIN:
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even know what ROM I should be downloading or where to get it from. Samsung Mobile doesn't have the n910A. What should I do?